Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Buffer Layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2012

Biaxially-Textured Photovoltaic Film Crystal Silicon on Ion Beam Assisted Deposition CaF2 Seed Layers on Glass

We grow biaxially textured heteroepitaxial crystal silicon (c-Si) films on display glass as a low-cost photovoltaic material. We first fabricate textured CaF{sub 2} seed layers using ion-beam assisted deposition, then coat the CaF{sub 2} with a thin, evaporated epitaxial Ge buffer and finally deposit heteroepitaxial silicon on the Ge. The silicon is grown by hot-wire chemical vapor deposition, a high-rate, scalable epitaxy technology. Electron and X-ray diffraction confirm the biaxial texture of the CaF{sub 2} and epitaxial growth of the subsequent layers. Transmission electron microscopy reveals columnar silicon grains about 500 nm across. We fabricate a proof-of-concept epitaxial film c-Si solar cell with an open circuit voltage of 375 mV that is limited by minority carrier lifetime.

14 SOLAR ENERGY↗
DOE OSTI2016

Contributed Review: Experimental characterization of inverse piezoelectric strain in GaN HEMTs via micro-Raman spectroscopy

Micro-Raman thermography is one of the most popular techniques for measuring local temperature rise in gallium nitride (GaN) high electron mobility transistors with high spatial and temporal resolution. However, accurate temperature measurements based on changes in the Stokes peak positions of the GaN epitaxial layers require properly accounting for the stress and/or strain induced by the inverse piezoelectric effect. It is common practice to use the pinched OFF state as the unpowered reference for temperature measurements because the vertical electric field in the GaN buffer that induces inverse piezoelectric stress/strain is relatively independent of the gate bias. Although this approach has yielded temperature measurements that agree with those derived from the Stokes/anti-Stokes ratio and thermal models, there has been significant difficulty in quantifying the mechanical state of the GaN buffer in the pinched OFF state from changes in the Raman spectra. In this paper, we review the experimental technique of micro-Raman thermography and derive expressions for the detailed dependence of the Raman peak positions on strain, stress, and electric field components in wurtzite GaN. We also use a combination of semiconductor device modeling and electro-mechanical modeling to predict the stress and strain induced by the inverse piezoelectric effect. Based on the insights gained from our electro-mechanical model and the best values of material properties in the literature, we analyze changes in the E{sub 2} high and A{sub 1} (LO) Raman peaks and demonstrate that there are major quantitative discrepancies between measured and modeled values of inverse piezoelectric stress and strain. We examine many of the hypotheses offered in the literature for these discrepancies but conclude that none of them satisfactorily resolves these discrepancies. Further research is needed to determine whether the electric field components could be affecting the phonon frequencies apart from the inverse piezoelectric effect in wurtzite GaN, which has been predicted theoretically in zinc blende gallium arsenide (GaAs).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2017

ALD synthesis of platinum nanoparticles on single-crystal SrTiO 3 pretreated with wet chemical etching

Formic acid-hydrogen peroxide and buffered hydrogen fluoride-hydrogen peroxide solutions were used to etch single-crystal strontium titanate to remove carbon contamination and increase hydroxyl group density to improve atomic layer deposition onto these materials. X-ray photoelectron spectroscopy indicated that both are effective for carbon contamination removal. However, for increasing hydroxyl group density on the strontium titanate surface, the buffered hydrogen fluoride-hydrogen peroxide is more effective. Transmission electron microscopy and x-ray photoemission show enhanced platinum deposition on the etched strontium titanate surface. Here these results provide the basis for optimizing atomic layer deposition for other technologically relevant materials.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Real-time Characterization of the Fine Structure and Dynamics of an Electrical Double Layer at Electrode-electrolyte Interfaces

The chemisorption of species from supporting electrolytes on electrode surfaces is ubiquitous in electrochemical systems and affects the dynamics and mechanism of various electrochemical reactions. The understanding of chemical structure and property of the resulting electrical double layer is vital but limited. In this work, we operando probed the electrochemical interface between a gold electrode surface and a common supporting electrolyte, phosphate buffer, using our newly developed in situ liquid secondary ion mass spectrometry. We surprisingly found that on the positively charged gold electrode surface sodium cations were anchored in the stern layer in a partially dehydrated form by formation of compact ion pairs with the accumulated phosphate anions. The resulting strong and dense adsorption phase was further revealed to retard the electro-oxidation reaction of ascorbate. This finding addressed one major gap in the fundamental science of electrode-electrolyte interfaces that where and how the cations reside in the double layer to impose effects on electrochemical reactions, providing insights into engineering of better electrode-electrolyte interfaces in electrochemical processes.

Zhang, Yanyan↗
DOE OSTI2018

Fabrication of MoS2@SnO2-SnS2 composites and their applications as anodes for lithium ion batteries

Highlights: • The MoS{sub 2}@SnO{sub 2}-SnS{sub 2} composites were successfully fabricated. • The composites show long-term cycling performance used as anode for LIBs. • The superior performance ascribes to the synergistic effect between MoS{sub 2} and SnO{sub 2}. - Abstract: Sn-based anode for lithium-ion batteries (LIBs) has been received extensive concern, due to its high theoretical specific capacity. However, its poor stability induced by serious volume changes during charge/discharge process limits its application. MoS{sub 2} possesses a 2-dimisional (2D) graphene-like layered structure facilitates lithium ions insertion and extraction and can be served as the buffer to alleviate the volume variation. Unfortunately, 2D MoS{sub 2} nanosheets are highly susceptible to stacking/restacking during cycles, which is fatal to their capacity retention. Herein, a novel MoS{sub 2}@SnO{sub 2}-SnS{sub 2} composite has been designed and fabricated via a two-step simple hydrothermal route. Due to the synergistic effect between the ultrathin MoS{sub 2} nanosheets and the SnO{sub 2}-SnS{sub 2} nanosheets, the MoS{sub 2}@SnO{sub 2}-SnS{sub 2} composite exhibits excellent electrochemical performance as anode for LIBs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Stability of tropical forest tree carbon-water relations in a rainfall exclusion treatment through shifts in effective water uptake depth

Increasing severity and frequency of drought is predicted for large portions of the terrestrial biosphere, with major impacts already documented in wet tropical forests. Using a 4-year rainfall exclusion experiment in the Daintree Rainforest in northeast Australia, we examined canopy tree responses to reduced precipitation and soil water availability by quantifying seasonal changes in plant hydraulic and carbon traits for 11 tree species between control and drought treatments. Even with reduced soil volumetric water content in the upper 1 m of soil in the drought treatment, we found no significant difference between treatments for predawn and midday leaf water potential, photosynthesis, stomatal conductance, foliar stable carbon isotope composition, leaf mass per area, turgor loss point, xylem vessel anatomy, or leaf and stem nonstructural carbohydrates. While empirical measurements of aboveground traits revealed homeostatic maintenance of plant water status and traits in response to reduced soil moisture, modeled belowground dynamics revealed that trees in the drought treatment shifted the depth from which water was acquired to deeper soil layers. Finally, these findings reveal that belowground acclimation of tree water uptake depth may buffer tropical rainforests from more severe droughts that may arise in future with climate change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Anti-P2 structured Na0.5NbO2 and its negative strain effect

Layer-structured oxides are studied for their essential roles in various applications (e.g. high-energy batteries and superconductors) due to their distinctive physical structures and chemical properties. Most of the layered AxMO2 (A = alkali ions, M = transition metals) are composed of MO6 octahedra and various A coordination polyhedra such as octahedra (O), tetrahedra (T) or trigonal prisms (P). Herein, we report a new layered oxide material, anti-P2 Na0.5NbO2, which is composed of NbO6 trigonal prisms and NaO6 octahedra. Its lattice shrinks as sodium (Na) ions are intercalated in it and expands when the ions are deintercalated (a negative volume or strain effect). Analysis by X-ray absorption spectroscopy and density functional theory (DFT) calculations indicates that the negative volume effect is mainly a result of the enhanced interlayer (Na–O) interaction and the weakened Nb– Nb and Nb–O bonding in the O–Nb–O slab upon Na intercalation. Moreover, Na0.5NbO2 exhibits high structural stability, a long cycle life and prominent rate performance for Na-ion batteries. These distinctive features make Na0.5NbO2 an ideal ‘‘volume buffer’’ to compensate for positive-strain electrode materials. These findings will arouse great interest in anti-P2 layered oxides for materials science and applications, and enrich the understanding of novel negative-strain materials for energy storage either as excellent independent active electrode materials or as volume buffers for constructing long-life composite electrodes made of positive-strain materials.

Wang, Xuefeng↗
DOE OSTI2022

EPMA-Based Mass Balance Method for Quantitative Fission Product Distribution Comparison between TRISO Particles

Two irradiated AGR-2 TRISO particles were chosen to demonstrate a recently developed mass balance technique in which EPMA-generated concentration data was used to determine fission product mass on a layer-by-layer basis in TRISO particles. EPMA-calculated fission product masses for most fission products in the two particles were within +/- 20% of their ORIGEN-modelled masses. Results show that Sr, Ba, and Eu accumulate preferentially in the carbon-rich kernel periphery on the particles’ side that lacks a gap between the buffer and IPyC. In addition, the more mobile elements--Cs, Sr, and Pd, accumulate in greater quantity in the outer layers of particle AGR2-223-RS34 compared to particle AGR2-223-RS06, which has relatively more of those elements’ mass located in the kernel and kernel periphery, suggesting enhanced fission product transport in particle AGR2-223-RS34. This model can be used better understand and test fission product transport in TRISO particles.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1999

Loss tolerant speech decoder for telecommunications

A method and device for extrapolating past signal-history data for insertion into missing data segments in order to conceal digital speech frame errors. The extrapolation method uses past-signal history that is stored in a buffer. The method is implemented with a device that utilizes a finite-impulse response (FIR) multi-layer feed-forward artificial neural network that is trained by back-propagation for one-step extrapolation of speech compression algorithm (SCA) parameters. Once a speech connection has been established, the speech compression algorithm device begins sending encoded speech frames. As the speech frames are received, they are decoded and converted back into speech signal voltages. During the normal decoding process, pre-processing of the required SCA parameters will occur and the results stored in the past-history buffer. If a speech frame is detected to be lost or in error, then extrapolation modules are executed and replacement SCA parameters are generated and sent as the parameters required by the SCA. In this way, the information transfer to the SCA is transparent, and the SCA processing continues as usual. The listener will not normally notice that a speech frame has been lost because of the smooth transition between the last-received, lost, and next-received speech frames.

Prieto, Jr., Jaime L.↗
DOE OSTI2011

High temperature step-flow growth of gallium phosphide by molecular beam epitaxy and metalorganic chemical vapor deposition

Post-growth surface morphologies of high-temperature homoepitaxial GaP films grown by molecular beam epitaxy (MBE) and metalorganic chemical vapor deposition (MOCVD) have been studied. Smooth, stepped surface morphologies of MBE-grown layers, measured by atomic force microscopy, were found for a wide range of substrate temperatures and P{sub 2}:Ga flux ratios. A MOCVD-based growth study performed under similar conditions to MBE-grown samples shows a nearly identical smooth, step-flow surface morphology, presenting a convergence of growth conditions for the two different methods. The additional understanding of GaP epitaxy gained from this study will impact its use in applications that include GaP-based device technologies, III-V metamorphic buffers, and III-V materials integration with silicon.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The vertical-velocity skewness in the atmospheric boundary layer without buoyancy and Coriolis effects

One of the main features of near-neutral atmospheric boundary layer (ABL) turbulence is the positive vertical velocity skewness $Sk_w$ above the roughness sublayer or the buffer region in smooth-walls. The $Sk_w$ variations are receiving renewed interest in many climate-related parameterizations of the ABL given their significance to cloud formation and to testing sub-grid schemes for Large Eddy Simulations (LES). The vertical variations of $Sk_w$ are explored here using wind tunnel and flume experiments collected above smooth, rough, and permeable-walls in the absence of buoyancy and Coriolis effects. These laboratory experiments form a necessary starting point to probe the canonical structure of $Sk_w$ as they deal with a key limiting case (i.e., near-neutral conditions). Diagnostic models based on cumulant expansions, realizability constraints, and constant mass flux approach routinely employed in the convective boundary layer as well as prognostic models based on third-order budgets are used to explain variations in $Sk_w$ for the idealized laboratory conditions. The failure of flux-gradient relations to model $Sk_w$ from the gradients of the vertical velocity variance σ$_w^2$ are explained and corrections based on models of energy transport offered. Novel links between the diagnostic and prognostic models are also featured, especially for the inertial term in the third-order budget of the vertical velocity fluctuation. The co-spectral properties of w′/σ w vs w′ 2 /σ$_w^2$ are also presented for the first time to assess the dominant scales governing $Sk_w$ in the inner and outer layers, where w′ is the fluctuating vertical velocity and σ w is the vertical velocity standard deviation.>

Boundary layer flow↗
DOE OSTI2024

Time-resolved cryogenic electron tomography for the study of transient cellular processes

Cryogenic electron tomography (cryo-ET) is the highest resolution imaging technique applicable to the life sciences, enabling sub-nanometer visualization of specimens preserved in their near native states. The rapid plunge freezing process used to prepare samples lends itself to time-resolved studies, which researchers have pursued for in vitro samples for decades. Here, we focus on developing a freezing apparatus for time-resolved studies in situ. The device mixes cellular samples with solution-phase stimulants before spraying them directly onto an electron microscopy grid that is transiting into cryogenic liquid ethane. By varying the flow rates of cell and stimulant solutions within the device, we can control the reaction time from tens of milliseconds to over a second prior to freezing. In a proof-of-principle demonstration, the freezing method is applied to a model bacterium, Caulobacter crescentus, mixed with an acidic buffer. Through cryo-ET we resolved structural changes throughout the cell, including surface-layer protein dissolution, outer membrane deformation, and cytosolic rearrangement, all within 1.5 seconds of reaction time. This new approach, Time-Resolved cryo-ET (TR-cryo-ET), enhances the capabilities of cryo-ET by incorporating a sub-second temporal axis and enables the visualization of induced structural changes at the molecular, organelle, or cellular level.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2015

Tuning the formations of metal-1,3,5-benzenetricarboxylate frameworks via the assistance of amino acids

Seven new metal-1,3,5-benzenetricarboxylate coordination polymers have been synthesized by modification of auxiliary components during the assembly reactions. Their structures have been determined by single-crystal X-ray diffraction analyses and further characterized by XRD and TGA. Interestingly, they show fascinating topological structures. Compounds 1 and 2 possess the undulating layer structure with 3-connected hcb network and (3,6)-connected kgd network. Compound 3 possesses three-dimensional (3D) pillared-layer structure with 3-connected 2-fold interpenetrating srs net. Compound 4 also has the 3D 2-fold interpenetrating pillared-layer structure; however, it has (3,5)-connected hms topology because the Cd(II) center is 5-connected. Compound 5 possess 3D structure through hydrogen bonding interactions between ladder-like layers. Compounds 6 and 7 have the similar 3D frameworks with 4-connected umc net and (3,7)-connected (3.4.5)(3{sup 2}.4{sup 6}.5{sup 5}.6{sup 8}) topology, respectively. The photoluminescent properties of compounds 2–7 were also investigated. - Graphical abstract: Presented here are seven new metal-1,3,5-benzenetricarboxylate coordination polymers with diverse structures from 2D layers to 3D open frameworks. The synthesis and structural diversity of these compounds are determined by the additional amino acids as unusual buffering agents. - Highlights: • Structural diversity of metal-1,3,5-benzenetricarboxylate frameworks. • Tuning structural topologies of MOFs via the assistance of amino acids. • Amino acids as unusual buffering agents for the synthesis of MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

AlGaN/GaN field effect transistors for power electronics—Effect of finite GaN layer thickness on thermal characteristics

AlGaN/GaN heterostructure field effect transistors with a 150 nm thick GaN channel within stacked Al{sub x}Ga{sub 1−x}N layers were investigated using Raman thermography. By fitting a thermal simulation to the measured temperatures, the thermal conductivity of the GaN channel was determined to be 60 W m{sup −1} K{sup −1}, over 50% less than typical GaN epilayers, causing an increased peak channel temperature. This agrees with a nanoscale model. A low thermal conductivity AlGaN buffer means the GaN spreads heat; its properties are important for device thermal characteristics. When designing power devices with thin GaN layers, as well as electrical considerations, the reduced channel thermal conductivity must be considered.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2011

Optical Properties of Epitaxial Al{sub x}In{sub 1-x}Sb Alloy Layers

Optical studies of unstrained narrow-gap Al{sub x}In{sub 1-x}Sb semiconductor alloy layers are carried out. The layers are grown by molecular-beam epitaxy on semi-insulating GaAs substrates with an AlSb buffer. The composition of the alloys is varied within the range of x = 0-0.52 and monitored by electron probe microanalysis. The band gap E{sub g} is determined from the fundamental absorption edge with consideration for the nonparabolicity of the conduction band. The refined bowing parameter in the experimental dependence E{sub g}(x) for the Al{sub x}In{sub 1-x}Sb alloys is 0.32 eV. This value is by 0.11 eV smaller than the commonly referred one.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Abrupt GaP/Si hetero-interface using bistepped Si buffer

We evidence the influence of the quality of the starting Si surface on the III-V/Si interface abruptness and on the formation of defects during the growth of III-V/Si heterogeneous crystal, using high resolution transmission electron microscopy and scanning transmission electron microscopy. GaP layers were grown by molecular beam epitaxy on vicinal Si (001). The strong effect of the Si substrate chemical preparation is first demonstrated by studying structural properties of both Si homoepitaxial layer and GaP/Si heterostructure. It is then shown that choosing adequate chemical preparation conditions and subsequent III-V regrowth conditions enables the quasi-suppression of micro-twins in the epilayer. Finally, the abruptness of GaP/Si interface is found to be very sensitive to the Si chemical preparation and is improved by the use of a bistepped Si buffer prior to III-V overgrowth.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Low-Oxidized Siloxene Nanosheets with High Capacity, Capacity Retention, and Rate Capability in Lithium-Based Batteries

The mechanical degradation experienced by Si electrodes during Li (de)alloying reactions can potentially be mitigated by using Si-based materials with layered 2D geometries. Such materials are expected to exhibit favorable mechanical properties and be capable of buffering the volume change associated with (de)lithitation. In this work, 2D siloxene nanosheets are synthesized using a facile topotactic reaction followed by ultrasonication as an exfoliation step. Here, detailed structural and chemical characterization via electron microscopy, X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy is conducted, revealing a low-oxidized siloxene nanosheet material with only 15% surface Si-oxide. The obtained siloxene nanosheets are tested as Li-ion negative electrodes in lithium-based electrochemical cells. The cells exhibit high rate capability with a capacity of 935 mAh g –1 at 3200 mA g –1 and ≈99.5% coulombic efficiency. The inclusion of fluoroethylene carbonate (FEC) in the electrolyte improves capacity retention over 200 cycles from 13% to 77% at 1000 mA g –1 . This behavior is attributed to the FEC decomposition forming a solid electrolyte interphase (SEI) with higher ion conductivity and robust LiF/Li x PO y F z content, as characterized via XPS Raman spectroscopy.

25 ENERGY STORAGE↗
DOE OSTI2016

Characteristics of TiO{sub 2}/ZnO bilayer film towards pH sensitivity prepared by different spin coating deposition process

In this study, titanium dioxide (TiO{sub 2}) and zinc oxide (ZnO) bilayer film for pH sensing application will be presented. TiO{sub 2}/ZnO bilayer film with different speed of spin-coating process was deposited on Indium Tin Oxide (ITO), prepared by sol-gel method. This fabricated bilayer film was used as sensing membrane for Extended Gate Field-Effect Transistor (EGFET) for pH sensing application. Experimental results indicated that the sensor is able to detect the sensitivity towards pH buffer solution. In order to obtained the result, sensitivity measurement was done by using the EGFET setup equipment with constant-current (100 µA) and constant-voltage (0.3 V) biasing interfacing circuit. TiO{sub 2}/ZnO bilayer film which the working electrode, act as the pH-sensitive membrane was connected to a commercial metal-oxide semiconductor FET (MOSFET). This MOSFET then was connected to the interfacing circuit. The sensitivity of the TiO2 thin film towards pH buffer solution was measured by dipping the sensing membrane in pH4, pH7 and pH10 buffer solution. These thin films were characterized by using Field Emission Scanning Electron Microscope (FESEM) to obtain the surface morphology of the composite bilayer films. In addition, I-V measurement was done in order to determine the electrical properties of the bilayer films. According to the result obtained in this experiment, bilayer film that spin at 4000 rpm, gave highest sensitivity which is 52.1 mV/pH. Relating the I-V characteristic of the thin films and sensitivity, the sensing membrane with higher conductivity gave better sensitivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗