Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BiO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Enhancing organic matter removal, product recovery, and hydrogen generation from fermentation wastewater

Existing ethanol biorefineries produce billions of gallons of wastewater (stillage) that must be treated extensively prior to discharge or concentrated in an energy intense evaporation step to produce animal feed as a value-added bioproduct. Yeasts and filamentous fungi were screened for growth and reduction of soluble organic compounds, carbohydrates, and protein from stillage to identify species capable of rapidly concentrating organic compounds into readily separable biomass in an attempt to concentrate the product using a much more efficient centrifugation step. Yeasts amenable to production of biomass derived products including bio-oils (Yarrowia lipolytica and Rhodotorula pallida), chitosan (Aspergillus niger) and animal feed (Cyberlindnera jadinii) were identified as well as microbes capable of efficient production of small organic acids with applications as bioderived polymers including 3-hydroxypropionic acid (engineered A. niger) and lactic acid using a co-culture of Debaryomyces udenii and Lactobacillus pentosus. The filamentous fungus A. niger eliminated all specifically measured soluble organics (glycerol, acetate, lactate, ethanol, and citrate) in under 48 hours and reduced total soluble protein content by 46% and total carbohydrate content by 83% within 96 hours, the greatest reduction in organic content observed. During this process an A. niger strain engineered to produce 3-hydroxypropionic acid achieved a yield of 0.35 C-mol 3HP / C-mol non-protein organics consumed at an overall rate of 0.09 g/Lh in unmodified stillage without pH control. Stillage treated by the fodder yeast C. jadinii as well as stillage containing acetic or lactic acid was found to be most suitable for growth by electrogenic bacteria with applications in production of electricity or hydrogen from wastewater. This work establishes fungal and bacterial strains appropriate for biological treatment of stillage to produce biomass derived products, soluble commodity chemicals, energy, and treated water to reduce the energy intensity and improve the economics of ethanol biorefineries.

09 BIOMASS FUELS↗
DOE OSTI2020

Influence of Vegetation Canopy Architecture on Dynamics of Spatiotemporal Light Distribution and its Effect on Land-Biosphere-Atmosphere Fluxes of Energy, Carbon, and Water

The dynamic spatiotemporal distribution of light and micro climatic variables (wind speed, atmospheric CO 2 concentration, humidity, pressure, and air temperature) within the plant canopy as determined by the canopy architecture play a critical role in land-biosphere-atmosphere (LBA) photosynthetic carbon uptake, transpiratory water loss and energy partitioning. Vegetation models that include effects of sun and shade flecks, leaf temperature and energy balance partitioning between sensible and latent heat fluxes, and reduced turbulent mixing in dense vegetation canopies can accurately predict canopy performance, particularly its shaded leaves, which can constitute 80% of leaf area and contribute up to 50% of carbon update and 65% of water loss. However, current vegetation models with their bulk characterization of shaded leaves poorly represent the complex three dimensional (3D) canopy architecture are insufficient to capture the spatiotemporal dynamics of shaded leaves. Here, we propose to employ an x-ray computed tomography (XCT) imaging technique in combination with an automated, high throughput, image processing pipeline (3DArch, to be developed) to obtain an explicit 3D triangulated surface mesh of a plant canopy (Fig 1). 3DArch would provide a much needed technological jump in 3D LBA modeling where computer generated artificial 3D models suffer from lack of high resolution detailed canopy architecture parameters. The 3D canopy surface mesh output from 3DArch is coupled with an explicit 3D forward ray tracing model (fastTracer) to obtain a high resolution representation of the dynamic spatiotemporal light environment within the canopy over the course of a day (Fig 1). The results from the light attenuation model are then coupled with a process based multi-scale bio-physical canopy and leaf model of photosynthesis (PlantGro) to get fluxes of carbon, water and energy at the leaf and canopy scale, in addition to estimating whole plant carbon uptake, and water loss. Our proposed model framework would be the first of its kind to provide a breakthrough capability in the field of process-based plant modeling that bridges the key technological gap in shaded leaf modeling through explicit representation of 3D canopy architecture. Computer generated artificial 3D model canopy simulations on grasses show that the canopy light distribution does not follow an exponential behavior as assumed in most 1D vegetation models, but rather exhibits a heterogeneous behavior, with a small but significant portion of interior canopy leaves experiencing peak light levels due to sun flecks while the rest of the canopy receives substantially lower light levels. These results indicate a bias in traditional models that overestimates shaded leaf contribution towards whole canopy photosynthesis by up to 15% and underestimate transpiration by up to 12% with an associated increase in sensible heat fluxes since photosynthesis, transpiration and energy partitioning are tightly coupled processes. However, these test results need to be validated using the 3D architecture obtained from a real plant imaged in 3D using 3DArch, rather than an artificial model plant. Our proposed model framework would allow us to identify inefficiencies in canopy light distribution and prescribe optimal canopy architectures (leaf optical properties, leaf area, leaf angles, row spacing, planting density, etc.) to traditional and genetic engineering based crop breeders, for maximizing target functions such as light use efficiency, water use efficiency, drought tolerance, crop yield, crop resilience etc., with important applications in biofuel crops such as sorghum, and switchgrass. Our model can also be applied for designing optimal canopy architecture that increase surface albedo as a mitigation strategy for global warming and projections of crop yield for future food and water security under climate change.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Developing Non-Food Grade Brassica Biofuel Feedstock Cultivars with High Yield, Oil Content, and Oil Quality that are Suitable for Low Input Production Dryland Systems (Final Report)

The U.S. uses a substantial amount of fossil fuel as an energy source for a wide range for functions including home heating, agriculture and transportation. In the transportation sector, diesel and jet fuel are consumed at a rapid rate, and alternative liquid energy is being investigated globally and nationally to reduce our dependence on fossil fuel and reduce the impact of our carbon footprint on global climate change. Non-food Brassica crops have the potential of producing high oil yield (over 250 gal acre-1) and have oil quality highly desirable for use as biodiesel or bio jet fuel. Developing oilseed feedstock Brassica cultivars with higher seed and oil yield, with high oil quality and with resistance to pathogens, that can be grown with few chemical inputs will helping break our dependence on fossil fuels and reduce importation of fossil fuels. While some oilseed Brassicas have been grown on a small scale for many years in the Pacific Northwest (PNW), adoption has been limited, and the potential of the crops have not been realized or even fully investigated. This report summarizes the results of a study to develop superior non-food grade winter (B. napus) and spring (B. napus and B. juncea) oilseed cultivars suitable for a range of PNW, and other US environments with high resistance to the biotic and abiotic stresses suitable for high-quality biofuel feedstocks. In conducting this work, genome-wide association selection was used to dissect the genetic architecture of industrial Brassica oilseed germplasm for yield, quality, and resistance to biotic and abiotic stresses. A genome-wide bioinformatics approach was used to identify putative PRR (pattern recognition receptor) - type resistance genes that confer durable resistance to blackleg. A novel transgenic approach was developed to generate resistant non-food oilseed lines using PPR genes Br1033 and Br8486. These genes were inserted into regionally adapted oilseed cultivars.

09 BIOMASS FUELS↗
DOE OSTI2023

Mechanistic Studies of a Primitive Homolog of Nitrogenase Involved in Coenzyme F430 Biosynthesis (Final Report)

Methyl-coenzyme M reductase (MCR) is the key enzyme in the biological formation and anaerobic oxidation of methane (AOM). Methane is a potent greenhouse gas and the major component of natural gas. Given the abundance of natural gas reserves in remote areas, there is great current interest in a scalable bio-based process for the conversion of methane to liquid fuel and other high-value chemicals. MCR holds much promise for use in such a methane bioconversion strategy. However, MCR cannot currently be produced in an active form in a heterologous host, due in large part to the lack of genetic and biochemical information about the production of holo MCR. In an effort to overcome this deficiency, our laboratory recently elucidated the biosynthetic pathway of the unique nickel-containing coenzyme of MCR, F430. The key step in coenzyme F430 biosynthesis (Cfb) was found to involve an unprecedented reductive cyclization reaction. This remarkable transformation, which involves a 6-electron reduction, the formation of a γ-lactam ring, and the generation of 7 stereocenters, is catalyzed by a primitive homolog of nitrogenase (CfbCD). Nitrogenase is a two-component metalloenzyme that catalyzes the adenosine triphosphate (ATP)-dependent reduction of dinitrogen to ammonia (nitrogen fixation). Homologs of nitrogenase are also involved in the biosynthesis of the photosynthetic pigments chlorophyll and bacteriochlorophyll. Phylogenetic analysis of the CfbCD complex suggests that it is representative of a more ancient lineage of the nitrogenase superfamily, and a thorough investigation of its structure and function is likely to shed light on the mechanisms and evolution of these important metalloenzymes. Moreover, a detailed understanding of the mechanism of the CfbCD complex may aid in the development of specific inhibitors to help reduce natural greenhouse gas emissions and can be exploited for the heterologous production of MCR for methane bioconversion. Towards these goals, specific aims were pursued for the 1) identification of physiological electron donors and in vivo coenzyme F430 synthesis, 2) analysis of the iron sulfur centers, structure, and oligomerization state changes, and 3) characterization of transient intermediates and the intercomponent electron transfer.

03 NATURAL GAS↗
DOE OSTI2023

SPERLU Selective Process for Efficient Removal of Lignin and Upgrading (Final Technical Report)

To meet the growing demand for bio-based chemicals and improve the profitability and efficiency of the emerging biorefinery industry, lignin is an abundant and attractive feedstock. Spero Renewables has developed a proprietary and patent-pending technology, the Selective Process for Efficient Removal of Lignin and Upgrading (SPERLU). The technology is a catalytic deconstruction and upgrading of lignin in lignocellulosic biomass or commercially available technical lignin to produce multi-functional phenol (MFP) products. The SPERLU process has been demonstrated and vetted on a lab scale to convert commercially available technical lignin to MFPs in yields of 60-90% (based on lignin). The MFP products can be separated and further upgraded through catalytic or biological means. Spero performed a detailed kinetic study of the SPERLU process and used the resulting kinetic data to design and construct a mini-pilot-scale reactor for routine production of hundreds of grams of MFP products. Spero’s lignin-based MFPs have been demonstrated for use as a drop-in replacement for bisphenol A (BPA) in the synthesis of thermoset polymers. Spero’s lignin-based thermoset polymers exhibit excellent mechanical properties and can be used in many applications. Additionally, a collaboration with the National Renewable Energy Lab (NREL) was used to evaluate the feasibility of upgrading SPERLU products through biological means into valuable chemicals. A comprehensive technoeconomic analysis (TEA) and Life-cycle analysis (LCA) have been completed and support the case for commercialization of the SPERLU technology. Through this project Spero has significantly de-risked the SPERLU technology and is actively planning larger scale pilot projects.

09 BIOMASS FUELS↗
DOE OSTI2023

Tailored Bioblendstocks With Low Environmental Impact To Optimize MCCI Engines

The prohect goal is to develop and demonstrate a microalgae bio-blendstock with greater than 60% greenhouse gas reduction potential relative to petroleum diesel, that can reduce sooting propensity, increase cetane number and improve engine thermal efficiency relative to a baseline diesel engine operating on conventional fuel.

09 BIOMASS FUELS↗
DOE OSTI2023

Systems Biology-Based Optimization of Extremely Thermophilic Lignocellulose Conversion to Bioproducts

This was a collaborative project involving researchers at the University of Georgia, North Carolina State University, Sanford‐Burnham‐Prebys Med. Discovery Institute and the University of Rhode Island. The over-arching goal was to demonstrate that non-model microorganisms, specifically extreme thermophiles, can be a strategic metabolic engineering platform for industrial biotechnology. We engineered the most thermophilic lignocellulose-degrading organism known, Caldicellulosiruptor bescii (Cbes) , which grows optimally near 80°C, and the most thermophilic fermentative organism known, Pyrococcus furiosus (Pfu) , which grows optimally at 100°C, to produce several key industrial chemicals. This work leveraged recent breakthrough advances in the development of molecular genetic tools for these organisms, complemented by a deep understanding of its metabolism and physiology gained over the past decade of study in the PIs’ laboratories. We applied the latest metabolic reconstruction and modeling approaches to optimize biomass to product conversion. Bio-processing above 70°C can have important advantages over near-ambient operations. Highly genetically-modified microorganisms usually have a fitness disadvantage and can be easily overtaken in culture when contaminating microbes are present. The high growth temperature of extreme thermophiles precludes growth or survival of virtually any contaminating organism or phage. This reduces operating costs associated with reactor sterilization and maintaining a sterile facility. In addition, at industrial scales, heat production from microbial metabolic activity vastly outweighs heat loss through bioreactor walls such that cooling is required. Extreme thermophiles have the advantage that non-refrigerated cooling water can be used if needed, and heating requirements can be met with low-grade steam typically in excess capacity on plant sites. We assembled a highly interdisciplinary team that brought together all of the expertise for the project to have successful outcomes. This project also built upon and utilized extensive information already available in the PIs’ labs for both Cbes and Pfu to develop models that provide a comprehensive description of these organisms’ physiology and metabolism that were utilized to inform metabolic engineering strategies. The models were validated with experimental data and the results demonstrated that unpretreated lignocellulose has the potential to be converted into value-added industrial chemicals at high loading at bioreactor scale. The data generated from this research were published in twenty-one peer-reviewed papers in international journals with online access.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Another Set of Python Tools for Visualizing and Manipulating Small-Angle Neutron Scattering Data: Descriptions and Examples

The GP-SANS, Bio-SANS and EQ-SANS instruments at ORNL utilize drtsans for data reduction. drtsans is built on Python, and it can be run using python scripts and Jupyter notebooks. The flexibility afforded by Python makes it possible to incorporate additional actions into the scripts used for data reduction, such as analysis and visualization. Here, a new set of tools for visualizing and manipulating SANS data that can be incorporated into the data reduction scripts for the ORNL SANS instruments, or employed during post–processing, is presented that expands the capabilities of the two previously-released tool sets.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Advanced Algal Biofoundries for the Production of Polyurethane Precursors

The primary goal of the BEEPs project was to develop a process that could accelerate the development of algae as bioproduction platforms, from initial chemical product concept to an economically viable market supply. Under this program we elected to develop strains of algae that could generate polyurethane precursors, while simultaneously developing basic genetic tools to enable improved algal production systems. This program was specifically designed to incorporate National Laboratories as a means to utilize the expertise and facilities for new bio-production platforms. To that end, we designed a program to collaborate with the Agile BioFoundry at Lawrence Berkeley National Laboratory (LBNL) and computational platforms at Pacific Northwest National Laboratory (PNNL). In addition to these National Laboratory partners, we also had academic partners from UC Davis and Georgia Tech, as well as commercial partners Algenesis Materials and BASF. To achieve these goals, we initially focused on developing the genetic tools and high throughput screening technologies necessary to generate and assess production of polymer precursors (succinic acid) in algae and cyanobacteria, including advanced promoters and biosensors. In parallel, we computationally identified potential production bottlenecks and then used the developed genetic tools to increase production rates and yields. Constant feedback of data was used in conjunction with machine learning, high-throughput cell sorting, and synthetic biology, for additional targeted metabolic engineering. Multiple rounds of tool design, building, testing, and learning were supplied to partners at PNNL and LBNL to develop new models and tools that could expedite bioproduction platform development and increase yield performance. We targeted, and achieved, the FOA requirement yield metric of 20 g/L, as a milestone and deliverable from at least one of our engineered strains for the production of succinic acid.

09 BIOMASS FUELS↗
DOE OSTI2023

Imaging Intact Filamentous Fungi from Spore to Hyphal Tip on the Nanoscale

Previously, the Pacific Northwest National Laboratory was limited by a 3-order of magnitude gap in resolution for direct 2-D and 3-D imaging of chemical, biological, energy and materials science systems. Our imaging instrumentation could directly visualize 3-D ultrastructure without labeling at resolutions less than 10-nanometers or greater than 10-micrometers. To address this gap, we procured and commissioned a Sigray NanoFast Bio-Lambda laboratory-based x-ray nanotomography system. This equipment provides the capability to image through tens of micrometers of organic materials at down to 35-nanometer resolution to bridge the nanoscale to the mesoscale for biological systems, organic polymers, environmental and particulate samples.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Nanotube-Supported Phospholipid Bilayers (Final Technical Report)

The overarching goal of this project was to attain fundamental understanding of structural organization, self-assembly, and function of redox-active enzymes and biological energy transduction systems localized at biological (cellular membranes) as well as manmade bio-nano interfaces. During this project we developed (1) nanopore surfaces suitable to stabilization of functional redox active enzymes and (2) experimental protocols for loading for loading of redox active enzymes into nanopores and taking advantage of self-assembly for forming layer(s) of redox active enzymes inside the nanochannels formed in anodic aluminum oxide (AAO) substrates.

14 SOLAR ENERGY↗
DOE OSTI2024

Rational Optimization of Microbial Processing for High Yield CO 2 -to-Isopropanol Conversion: Cooperative Research and Development Final Report, CRADA Number CRD-20-17114

This project focuses on the production of the fuel blendstock isopropanol using a CO 2 -fixing Clostridium by metabolic engineering and process optimizations. The project will initiate from a baseline isopropanol producer and pursue isopropanol production at high carbon-conversion efficiency. We will lead engineering work by in-depth pathway analyses including thermodynamics optimization, enzyme expense analysis, metabolic robustness analysis, and -omics analysis. The isopropanol production will be optimized via genome editing followed by fermentation optimizations. This project will deliver a novel microbial process that efficiently converts waste CO 2 to isopropanol at ~g/L titer level within 18-months. This project will layout a solid knowledge basis and technology platform for renewable CO 2 valorization to bio-blendstock that help achieve Co-Optima and Shell's goals.

09 BIOMASS FUELS↗
DOE OSTI2022

Catalytic Upgrading of Ethanol to C8+ Distillate Range Ethers via Guerbet Coupling and Etherification

Guerbet coupling followed by etherification is a two step process for conversion of ethanol into distillate range molecules. This involves first alcohol oligomerization, followed by acid-catalyzed dehydration. As we will show in this presentation, ethanol can be converted to higher linear and α-branched alcohols by C-C coupling reactions (ethanol oligomerization) as well as to high molecular weight esters by C-O coupling reactions with Cu/MgxAlOy (CuHT) catalysts. Alcohols may be converted to ethers via bimolecular dehydration in a subsequent step. We have identified more than 160 number of species in the products including alcohols, esters, aldehydes, ketonces, and olefins. Alcohols range from C4 to C10. Both alcohols and esters follow a Schulz-Flory chain growth model. We show the relationship between the catalyst properties (BET surface area, acid and base site count and Cu loading and synthesis method) and the performance in the reactions. We also show that physical mixtures of CuHT and HT can have similar product selectivity of low loading CuHT catalysts. The selectivity towards diesel fuel precursor compounds (hereafter ‘DFPC’) increased with conversion until reaching a plateau at high ethanol conversion (~70%). Alcohol selectivity follows a Schultz-Flory distribution at all studied conversions, and that adsorbed ethanol-derived species may undergo surface oligomerization into 1-butanol and higher alcohols before desorbing in a chain-growth mechanism. Zeolite catalysts convert the C4+ alcohols into C8+ ethers in both batch and continuous flow reactors. Selectivities of up to 80% to C8+ ethers at around 70% conversion using a single pass continuous flow system are able to be achieved. The final product feedstocks obtained from etherification have been used in technoeconomic (TEA) and lifecycle analysis (LCA), which indicate a reduction in greenhouse gas (GHG) emissions of 50% relative to conventional diesel. These final feedstocks are undergoing engine testing to elucidate the physiochemical properties and will be compared to diesel #2 ASTM standards as a reference and will serve as a basis to improve the final bio-diesel blendstocks from etherification.

Huber, George↗
DOE OSTI2024

BioPhotovoltaics: New paradigm towards high-efficiency and high-stability cells

In this project, we demonstrated significant progress in the development of Bio-Photovoltaic (BioPV) technology, with a particular focus on the transition from the initial success with Artemisinin (ART) to the development of the E1 compound. This journey began with the exploration of less conformationally restricted analogs of ART, leading to the discovery of E1. The initial success in the first quarter with ART set a precedent for the project, guiding our approach in molecular selection and design. Our computational studies provided a solid rationale for selecting specific biomolecules, with density functional theory calculations revealing the potential of certain molecules to form beneficial interactions with perovskite. This was a crucial step in narrowing down the candidate molecules from a broader selection. Subsequently, our approach involved simplifying these molecules to refine their properties and enhance their performance in bioPV applications. The ART-MAPbI3 films, for example, showcased not only high carrier mobility and hydrophobicity but also a significant increase in PCE. The evolution from ART to E1 was marked by a thorough understanding of molecular interactions and their impact on the material’s performance. This progression, from the complexity of lead candidates to the modeling and testing of simplified compounds, has culminated in the development of next-generation biomolecules with vastly improved properties. The link between E1 and ART, through this enhanced understanding, has been compelling and instrumental in achieving the milestones set forth in our project. The success in material and device performance underscores the importance of fundamental molecular design parameters, pointing towards future potential in the field of bioPV technology.

14 SOLAR ENERGY↗
DOE OSTI2023

Tailored Bioblendstocks with Low Environmental Impact to Optimize MCCI Engines (Final Technical Report)

The overall objective of the project is to develop and demonstrate a microalgae bio-blendstock with greater than 60% greenhouse gas reduction potential relative to petroleum diesel, that can reduce sooting propensity, increase cetane number and improve engine thermal efficiency relative to a baseline diesel engine operating on conventional fuel. Overall, the project achieved the proposed objectives including producing the final tangible deliverable. A sample of algal bioblendstock was analyzed by National Renewable Energy Laboratory (NREL) staff and partners at Yale University. In addition, the work outlined in this report provides substantial new knowledge on the subjects of algae cultivation, algae conversion to biocrude, biocrude upgrading and combustion optimization.

09 BIOMASS FUELS↗
DOE OSTI2024

Catalytic Approaches to C–O Activation in Biorenewable Feedstocks

The carbon present in biomass (the largest renewable source on the planet) continues to tempt us as a possible replacement for the carbon we currently obtain from fossil fuels. As we have recently reviewed, the challenges of extracting chemically useful feedstocks from biorenewables, and, especially, cellulosics, is largely under-developed relative to the maturity of the technologies for deriving industrially useful chemicals from petroleum. This ultimately boils down to problems in functionalization catalysis (for oil) versus defunctionalization (for cellulosics). The technology gap for achieving the selective defunctionalization of cellulosic feedstocks is much larger than it is for petroleum functionalization. This assessment suggests that the problem is not that bio-renewable feedstocks are fundamentally flawed from an economic and chemical sustainability perspective, but that we lack the technologies for deoxygenating cellulosic to more valuable chemicals. Bozell and Petersen have argued that integrated biorefineries will require a suite of products for viability (in analogy to an integrated petroleum refinery). These products will range from low-value high-volume energy related products (i.e. fuels) to high-value low-volume compounds focused on specialty markets and pharmaceuticals. The latter, although less impactful in terms of volume, is a critical economic component of the future integrated biorefinery. Our review was stimulated by their assessment of the state of the biorefinery and focused on the available chemistries for achieving low-volume high-value outcomes. To help fill this technology gap, we seek new catalytic technologies for synthesizing high-value chemicals from cellulosics and take the view that the inherent chirality of C 6 O 6 feedstocks will provide valuable materials for specialty and pharmaceutical applications, but only if one can achieve site-selective reactions that don’t denude the stereochemistry inherent to the sugars. Eliminative methods are less desirable as this deoxygenation scheme removes multiple stereocenters. The research plan outlined herein seeks methods for site-selective deoxygenation reactions that lead to high value specialty/pharma products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Aspatial Oxyanion Reduction Catalysis

The scientifically challenging problem of catalytically reducing oxyanions was explored and presented great opportunities in terms of the environment, economics and energy self-sufficiency. Oxyanions are pervasive as they are found in many areas of technology, all forms of life, in minerals, and as synthetic materials. Given their ubiquity, the contamination of inorganic oxyanions in drinking water is a national problem as 26 states and Puerto Rico have reported high concentrations of these harmful pollutants. The goals achieved by this research was to catalytically investigate the reduction of new oxyanions utilizing sustainable earth abundant catalysts featuring bio-inspired ligands. Further, ligand modifications will be explored to understand the impact on oxyanion reduction, mechanistic studies, and for electrocatalytic oxyanion reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Independent Fuel Property Effects of Fuel Volatility on Low Temperature Heat Release and Fuel Autoignition (Final Report)

This Cooperative Research and Development Agreement (CRADA) project between Argonne National Laboratory (ANL), Oak Ridge National Laboratory (ORNL), and Shell Global Solutions (Shell) was initiated as part of a Directed Funding Opportunity (DFO) call for proposals from the Co-Optimization of Fuels and Engines (Co-Optima) initiative. Shell had observed that volatile fuels suppress low temperature heat release (LTHR) more than expected based on conventional gasoline autoignition metrics: research octane number (RON) and motor octane number (MON). The role of LTHR contributes to autoignition phenomena for both boosted spark ignition (BSI) and advanced compression ignition (ACI) combustion modes. ACI combustion modes are applicable to large engines in the hard-to-electrify applications such as off-road, rail, and marine. Thus, having a reliable understanding of autoignition phenomena, including being able to accurately account for the effects of fuel volatility, is particularly important as new synthetic and bio-fuel compositions are considered.This CRADA project aimed to test the hypothesis that the decreased LTHR is due to preferential evaporation of multicomponent fuels when using direct injection (DI) fueling technology, creating composition and reactivity stratification. A custom set of fuels was designed and blended to test this hypothesis by Shell, with experimental engine studies at ORNL and engine combustion modeling by ANL. However, the initial experimental findings did not show the expected effect of fuel volatility suppressing LTHR. Instead, the LTHR propensity observed was independent of the fuel volatility. Due to the unexpected experimental result, the remainder of the experimental effort was redirected to study the effect of fuel volatility on emissions under spark-ignited cold-start conditions. However, as with the LTHR experiments, the cold start effort did not show a meaningful effect of fuel volatility on cold start emissions. Meanwhile, improved engine CFD models have been developed for both LTHR and cold start operations for the Shell fuels with different volatilities. While the simulation efforts were not pursued further due to the insignificant effects of fuel volatility as shown in experiments, the models developed can be easily retooled for off-road, rail, and marine applications.

09 BIOMASS FUELS↗