Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BOOSTER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Space shuttle solid rocket booster cost-per-flight analysis technique

A cost per flight computer model is described which considers: traffic model, component attrition, hardware useful life, turnaround time for refurbishment, manufacturing rates, learning curves on the time to perform tasks, cost improvement curves on quantity hardware buys, inflation, spares philosophy, long lead, hardware funding requirements, and other logistics and scheduling constraints. Additional uses of the model include assessing the cost per flight impact of changing major space shuttle program parameters and searching for opportunities to make cost effective management decisions.

Forney, J. A.↗

Space shuttle solid rocket booster recovery subsystem

The studies, the development, and the testing program that led to the design and delivery of all flight hardware are described. Special emphasis was placed on the recovery parachutes. The parachutes were designed to deploy in a severe environment and safely lower to Earth an 85 ton rocket motor casing.

Runkle, R. E.↗

Liquid Booster Module (LBM) plume flowfield model

A complete definition of the LBM plume is important for many Shuttle design criteria. The exhaust plume shape has a significant effect on the vehicle base pressure. The LBM definition is also important to the Shuttle base heating, aerodynamics and the influence of the exhaust plume on the launch stand and environment. For these reasons a knowledge of the LBM plume characteristics is necessary. A definition of the sea level LBM plume as well as at several points along the Shuttle trajectory to LBM, burnout is presented.

Smith, S. D.↗

Solid rocket booster sting interference wind tunnel test analysis, appendix D

Additional analyses of wind tunnel test results from SRB sting interference test TWT 660 and HRWT 042 were conducted to evaluate the sting interference that may be present in the Space Shuttle SRB reentry aerodynamic math model. Additional wind tunnel data was obtained at higher angles of attack from test program TWT 660 and test program HRWT 042. The additional data were analyzed to evaluate the procedures used to fair the data in the development of the SRB reentry aerodynamic data Tape no. 5.

Conine, B.↗

Shuttle derived vehicle analysis solid booster unmanned launch vehicle concept definition study, volume 2

The technical effort associated with the selection and definition of the recommended SRB-X concept is documented. Included are discussions concerning the trades leading to the selected concept, the analysis that established the concept's basic subsystem characteristics, selected configuration description and performance capabilities, launch site operations and facility needs, development schedule, cost characteristics, risk assessment, and a cursory comparison with other launch systems.

Source record↗

Pressure scaled water impact test of a 12.5 inch diameter model of the Space Shuttle solid rocket booster

A total of 59 tail first drops were made. Model entry conditions simulated full scale vertical velocities of approximately 75 to 110 ft/sec with horizontal velocities up to 45 ft/sec and impact angles to + or - 10 deg. These tests were conducted at scaled atmospheric pressures (1.26 psia or 65 mm.Hg). The model, test program, test facility, test equipment, instrumentation system, data reduction procedures, and test results are described.

Source record↗

Dynamic assessment of B-52B-008 carrier aircraft for the revised Space Shuttle solid rocket booster decelerator subsystem drop test vehicle

The structural integrity of B-52B-008, pylon, and hooks for the drop test missions was determined by theoretical analysis. The results of the analysis and conclusions are presented in this document. The major modification to the drop test vehicle was shortening it about 54 inches, which resulted in the forward hook attach structure being located at the base of the nosecone. The shims that are located in the aft hook structures are increased from two inches to three inches. Airspeed, aerodynamic configuration, and load charts are included.

Doty, L. J.↗

Rocket-Booster Towing Simulation

Report describes computer simulation of motion of solid-rocket ship. Listing of simulation program in FORTRAN. Mathematical techniques useful in such other maritime applications as buoy or ship design.

Trovillion, T. A.↗

Space Shuttle booster thrust imbalance analysis

An analysis of the Shuttle SRM thrust imbalance during the steady-state and tailoff portions of the boost phase of flight are presented. Results from flights STS-1 through STS-13 are included. A statistical analysis of the observed thrust imbalance data is presented. A 3 sigma thrust imbalance history versus time was generated from the observed data and is compared to the vehicle design requirements. The effect on Shuttle thrust imbalance from the use of replacement SRM segments is predicted. Comparisons of observed thrust imbalances with respect to predicted imbalances are presented for the two space shuttle flights which used replacement aft segments (STS-9 and STS-13).

Bailey, W. R.↗

The Slinger - An in-orbit booster facility

The Slinger, a permanent facility that can be built and stationed in a low earth orbit and can reduce the cost of transporting satellites into geostationary orbit by a factor of three, is examined. The Slinger is described, giving its size, mass, capacity, and the construction of its tethers. Techniques for accelerating the tethers are discussed. The operation of the Slinger is examined, including its launching of a payload into geostationary transfer orbit (GTO) and its return to lower orbit. The Slinger's cycle time, its handling of lighter GTO payloads, and the effects of orbital precession and drag are briefly discussed. A possible reusable second stage based at the Slinger is discussed, and missions involving higher velocity and heavier payloads that can be helped by the Slinger are briefly considered along with the use of the Slinger to provide astronauts with 1 g and the use of a Slinger on the moon.

Muller, R. M.↗

Solid rocket booster joint seal analyses

O-ring response and sealing in pressurized shell structures is examined. The study found that the key elements in the failure of the seal to be joint opening and rotation, assembly out of roundness, and O-ring seal response.

Moore, Carleton J.↗

Evaluation of the resiliency characteristics of several candidate Solid Rocket Booster O-ring materials

Resiliency tests have been conducted in order to evaluate O-ring sealing response in the revised Space Shuttle SRBs, giving attention to the effects of temperature and gap-opening rates. Additional testing was conducted to ascertain O-ring responses to simulated SRB field-joint deflections. All tests employed a face-seal fixture mounted on a servohydraulic apparatus. The Viton candidate O-ring material tracked the gap-opening rate better at higher temperatures and lower gap-opening rates; it was also the only material inert to the calcium grease employed. Heaters must be used to maintain the 70 F minimum temperature at which the Viton O-ring will track the required gap opening rate.

Lach, C. L.↗