SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Tall Lunar Tower (TLT) In-Space Assembly (ISA) team aims to design, model, fabricate, autonomously assemble, and characterize a TLT engineering development unit (EDU). The autonomous assembly of a tower also demonstrates a cross-cutting technology that can be applied to other lunar structures, such as blast shields, radiation shelters, and safe havens.
Robots are playing an increasing role in space exploration and in-space servicing. Robotic arms are good for performing in-space tasks such as modular assembly. The SPIDER arm (SPace Infrastructure Dexterous Robot) of the OSAM-1 mission represents an example of a system that can perform modular antenna assembly tasks in environmental conditions that would be dangerous for astronauts. One of the WVRTC activities is to perform independent verification and validation of the SPIDER assembly operations.
Supercritical Water-Cooled Reactor (SCWR) is one of Gen-IV reactor systems for its advantages over LWRs, such as high thermal efficiency, simplified reactor system and economics. Annular fuel was proposed by MIT to supplant conventional solid fuel and improve power density in LWRs. Annular fuel is cooled from both inside and outside of the fuel. Thus a lower fuel temperature and cladding surface temperature can be achieved with higher power density. SCWRs will benefit from this advantage because high cladding temperature (usually over 650 degree C) is one challenge of SCWRs. Using annular fuel in SCWRs is very promising. This is also because the inner hole of the annual fuel can provide extra neutron moderation. Supercritical water density is too low to provide enough moderation. Different analysis codes have been developed all over the world to carry out SCWR pre-conceptual core design. Yamaji et al. developed SRAC/ASMBURN/COREBN to study Japan version of SCWR. Monti et al. used ERANOS to analyze HPLWR (High Performance Light Water Reactor). WIMS-D4/CITATION was also used to calculate HPLWR by Tashakor et al.. These codes employ a two-step method used in PWRs calculation. Lattice/Assembly calculation is carried out as the first step. In the second step, few group constant of different fuel assembly types is then used in core calculation. MCNP had also been used to study SCWR by Watta et al.. Due to large computation time cost, it's used mostly to analyze fuel assembly or core performance rather than pre-conceptual design, in which much optimization is needed. In this research, a neutronics calculation code for SCWR is developed using two-step method. This code is verified by comparing with Monte-Carlo code. Fuel assembly homogenization method is studied to improve the code accuracy.
Abstract Here, a comprehensive study on the synthesis, characterization, and reactivity of grain‐boundary (GB)‐rich noble metal nanoparticle (NP) assemblies is presented. A facile and scalable synthesis of Pt, Pd, Au, Ag, and Rh NP assemblies is developed, in which NPs are predominantly connected via Σ3 (111) twin GBs, forming a network. Driven by water electrolysis, the random collisions and oriented attachment of colloidal NPs in solution lead to the formation of Σ3 (111) twin boundaries and some highly mismatched GBs. This synthetic method also provides convenient control over the GB density without altering the crystallite size or GB type by varying the NP collision frequency. The structural characterization reveals the presence of localized tensile strain at the GB sites. The ultrahigh activity of GB‐rich Pt NP assembly toward catalytic hydrogen oxidation in air is demonstrated, enabling room‐temperature catalytic hydrogen sensing for the first time. Finally, density functional theory calculations reveal that the strained Σ3(111) twin boundary facilitates oxygen dissociation, drastically enhancing the hydrogen oxidation rate via the dissociative pathway. This reported large‐scale synthesis of the Σ3 (111) twin GB‐rich structures enables the development of a broad range of high‐performance GB‐rich catalysts.
Abstract Achieving self‐assembling structures that exhibit emergent properties and functionalities is one of the holy grails in nanotechnology and holds great promise for a wide range of potential applications. Herein, a self‐assembled LuFeO 3 –(1/3)LuFe 2 O 4 –LuFeO 3 heterostructure that consists of two model multiferroics, i.e., hexagonal LuFeO 3 and rhombohedral LuFe 2 O 4 , is reported in single‐layer epitaxial LuFeO 3 thin films. Atomic‐scale electron microscopy investigations reveal the spontaneous organization of ferroelectric polarization in each building block, which forms a series of polar configurations. Specifically, the charge and lattice of neighboring LuFeO 3 and LuFe 2 O 4 blocks are closely coupled with competing degrees of freedom. A combination of the quantitative analysis of atomically resolved images and spectroscopy with theoretical calculations determines how charge‐ordering‐induced polarization accommodates charge naturality across the interfaces to reduce the system energy and unravels the formation mechanism of this heterostructure. The results point to the possibilities of generation and control of multiferroic self‐assembled systems, which may provide a basis for engineering novel materials with emergent properties.
Abstract Ring‐shaped nanostructures can focus, filter, and manipulate electromagnetic waves, but are challenging to incorporate into devices using standard nanofabrication techniques. Directed self‐assembly (DSA) of block copolymers (BCPs) on lithographically patterned templates has successfully been used to fabricate concentric rings and spirals as etching masks. However, this method is limited by BCP phase behavior and material selection. Here, a straightforward approach to generate ring‐shaped nanoparticle assemblies in thin films of supramolecular nanocomposites is demonstrated. DSA is used to guide the formation of concentric rings with radii spanning 150–1150 nm and ring widths spanning 30–60 nm. When plasmonic nanoparticles are used, ring nanodevice arrays can be fabricated in one step, and the completed devices produce high‐quality orbital angular momentum (OAM). Nanocomposite DSA simplifies and streamlines nanofabrication by producing metal structures without etching or deposition steps; it also introduces interparticle coupling as a new design axis. Detailed analysis of the nanoparticle ring assemblies confirms that the supramolecular system self‐regulates the spatial distribution of its components, and thus exhibits a degree of flexibility absent in DSA of BCPs alone, where structures are determined by polymer‐pattern incommensurability. The present studies also provide guidelines for developing self‐regulating DSA as an alternative to incommensurability‐driven methods.
Abstract A series of rod‐shaped polyoxometalates (POMs) [Bu 4 N] 7 [Mo 6 O 18 NC(CH 2 O) 3 MnMo 6 O 18 (OCH 2 ) 3 CNMo 6 O 18 ] and [Bu 4 N] 7 [ArNMo 6 O 17 NC(CH 2 O) 3 MnMo 6 O 18 (OCH 2 ) 3 CNMo 6 O 17 NAr] (Ar=2,6‐dimethylphenyl, naphthyl and 1‐methylnaphthyl) were chosen to study the effects of cation–π interaction on macroionic self‐assembly. Diffusion ordered spectroscopy (DOSY) and isothermal titration calorimetry (ITC) techniques show that the binding affinity between the POMs and Zn 2+ ions is enhanced significantly after grafting aromatic groups onto the clusters, leading to the effective replacement of tetrabutylammonium counterions (TBAs) upon the addition of ZnCl 2 . The incorporation of aromatic groups results in the significant contribution of cation–π interaction to the self‐assembly, as confirmed by the opposite trend of assembly size vs. ionic strength when compared with those without aromatic groups. The small difference between two aromatic groups toward the Zn 2+ ions is amplified after combining with the clusters, which consequently triggers the self‐recognition behavior between two highly similar macroanions.
Abstract Mesoporous metal oxides (MMOs) have been demonstrated great potential in various applications. Up to now, the direct synthesis of MMOs is still limited to the solvent induced inorganic‐organic self‐assembly process. Here, we develop a facile, general, and high throughput solvent‐free self‐assembly strategy to synthesize a series of MMOs including single‐component MMOs and multi‐component MMOs (e.g., doped MMOs, composite MMOs, and polymetallic oxide) with high crystallinity and remarkable porous properties by grinding and heating raw materials. Compared with the traditional solution self‐assembly process, the avoidance of solvents in this method not only greatly increases the yield of target products and synthesis efficiency, but also reduces the environmental pollution and the consumption of cost and energy. We believe the presented approach will pave a new avenue for scalable production of advanced mesoporous materials for various applications.
Abstract It is critical to assemble nanoparticles (NPs) into superlattices with controlled symmetries and spacings on substrates for metamaterials applications, where such structural parameters dictate their properties. Here, we use DNA to assemble anisotropic NPs of three shapes—cubes, octahedra, and rhombic dodecahedra—on substrates and investigate their thermally induced reorganization into two‐dimensional (2D) crystalline films. We report two new low‐density 2D structures, including a honeycomb lattice based on octahedral NPs. The low‐density lattices favored here are not usually seen when particles are crystallized via other bottom‐up assembly techniques. Furthermore, we show that, consistent with the complementary contact model, a primary driving force for crystallization is the formation of directional, face‐to‐face DNA bonds between neighboring NPs and between NPs and the substrate. Our results can be used to deliberately prepare crystalline NP films with novel morphologies.
Abstract Charge transfer (CT) interactions have been widely used to construct supramolecular systems, such as functional nanostructures and gels. However, to date, there is no report on the generation of CT complexes at the liquid–liquid interface. Here, by using an electron‐deficient acceptor dissolved in water and an electron‐rich donor dissolved in oil, we present the in situ formation and assembly of CT complex surfactants (CTCSs) at the oil–water interface. With time, CTCSs can assemble into higher‐order nanofilms with exceptional mechanical properties, allowing the stabilization of liquids and offering the possibility to structure liquids into nonequilibrium shapes. Moreover, due to the redox‐responsiveness of the electron‐deficient acceptor, the association and dissociation of CTCSs can be reversibly manipulated in a redox process, leading to the switchable assembly and disassembly of the resultant constructs.
Abstract Thermoresponsive resilin‐like polypeptides (RLPs) of various lengths were genetically fused to two different computationally designed coiled coil‐forming peptides with distinct thermal stability, to develop new strategies to assemble coiled coil peptides via temperature‐triggered phase separation of the RLP units. Their successful production in bacterial expression hosts was verified via gel electrophoresis, mass spectrometry, and amino acid analysis. Circular dichroism (CD) spectroscopy, ultraviolet‐visible (UV/Vis) turbidimetry, and dynamic light scattering (DLS) measurements confirmed the stability of the coiled coils and showed that the thermosensitive phase behavior of the RLPs was preserved in the genetically fused hybrid polypeptides. Cryogenic‐transmission electron microscopy and coarse‐grained modeling revealed that functionalizing the coiled coils with thermoresponsive RLPs leads to their thermally triggered noncovalent assembly into nanofibrillar assemblies.
It is critical to assemble nanoparticles (NPs) into superlattices with controlled symmetries and spacings on substrates for metamaterials applications, where such structural parameters dictate their properties. Here, we use DNA to assemble anisotropic NPs of three shapes-cubes, octahedra, and rhombic dodecahedra-on substrates and investigate their thermally induced reorganization into two-dimensional (2D) crystalline films. We report two new low-density 2D structures, including a honeycomb lattice based on octahedral NPs. The low-density lattices favored here are not usually seen when particles are crystallized via other bottom-up assembly techniques. Furthermore, we show that, consistent with the complementary contact model, a primary driving force for crystallization is the formation of directional, face-to-face DNA bonds between neighboring NPs and between NPs and the substrate. Finally, our results can be used to deliberately prepare crystalline NP films with novel morphologies.
Abstract Charge transfer (CT) interactions have been widely used to construct supramolecular systems, such as functional nanostructures and gels. However, to date, there is no report on the generation of CT complexes at the liquid–liquid interface. Here, by using an electron‐deficient acceptor dissolved in water and an electron‐rich donor dissolved in oil, we present the in situ formation and assembly of CT complex surfactants (CTCSs) at the oil–water interface. With time, CTCSs can assemble into higher‐order nanofilms with exceptional mechanical properties, allowing the stabilization of liquids and offering the possibility to structure liquids into nonequilibrium shapes. Moreover, due to the redox‐responsiveness of the electron‐deficient acceptor, the association and dissociation of CTCSs can be reversibly manipulated in a redox process, leading to the switchable assembly and disassembly of the resultant constructs.
This paper presents an enzyme building block for the assembly of megamolecules. The system is based on the inhibition of the human-derived cellular retinoic acid binding protein II (CRABP2) domain. We synthesized a synthetic retinoid bearing an arylfluorosulfate group, which uses sulfur fluoride exchange click chemistry to covalently inhibit CRABP2. We conjugated both the inhibitor and a fluorescein tag to an oligo(ethylene glycol) backbone and measured a second-order rate constant for the protein inhibition reaction of approximately 3,600 M -1 s -1 . We used this new enzyme-inhibitor pair to assemble multi-protein structures in one-pot reactions using three orthogonal assembly chemistries to demonstrate exact control over the placement of protein domains within a single, homogeneous molecule. This work enables a new dimension of control over specificity, orientation, and stoichiometry of protein domains within atomically precise nanostructures.
Abstract The shapes and morphological features of grains in sand assemblies have far‐reaching implications in many engineering applications, such as geotechnical engineering, computer animations, petroleum engineering, and concentrated solar power. Yet, our understanding of the influence of grain geometries on macroscopic response is often only qualitative, due to the limited availability of high‐quality 3D grain geometry data. In this paper, we introduce a denoising diffusion algorithm that uses a set of point clouds collected from the surface of individual sand grains to generate grains in the latent space. By employing a point cloud autoencoder, the three‐dimensional point cloud structures of sand grains are first encoded into a lower‐dimensional latent space. A generative denoising diffusion probabilistic model is trained to produce synthetic sand that maximizes the log‐likelihood of the generated samples belonging to the original data distribution measured by a Kullback‐Leibler divergence. Numerical experiments suggest that the proposed method is capable of generating realistic grains with morphology, shapes and sizes consistent with the training data inferred from an F50 sand database. We then use a rigid contact dynamic simulator to pour the synthetic sand in a confined volume to form granular assemblies in a static equilibrium state with targeted distribution properties. To ensure third‐party validation, 50,000 synthetic sand grains and the 1542 real synchrotron microcomputed tomography (SMT) scans of the F50 sand, as well as the granular assemblies composed of synthetic sand grains are made available in an open‐source repository.
ABSTRACT For most species, transcriptome data are much more readily available than genome data. Without a reference genome, gene calling is cumbersome and inaccurate because of the high degree of redundancy in de novo transcriptome assemblies. To simplify and increase the accuracy of de novo transcriptome assembly in the absence of a reference genome, we developed UnigeneFinder. Combining several clustering methods, UnigeneFinder substantially reduces the redundancy typical of raw transcriptome assemblies. This pipeline offers an effective solution to the problem of inflated transcript numbers, achieving a closer representation of the actual underlying genome. UnigeneFinder performs comparably or better, compared with existing tools, on plant species with varying genome complexities. UnigeneFinder is the only available transcriptome redundancy solution that fully automates the generation of primary transcript, coding region, and protein sequences, analogous to those available for high‐quality reference genomes. These features, coupled with the pipeline’s cross‐platform implementation, focus on automation, and an accessible, user‐friendly interface, make UnigeneFinder a useful tool for many downstream sequence‐based analyses in nonmodel organisms lacking a reference genome, including differential gene expression analysis, accurate ortholog identification, functional enrichments, and evolutionary analyses. UnigeneFinder also runs efficiently both on high‐performance computing (HPC) systems and personal computers, further reducing barriers to use.
The rational design of nanoscopic DNA tiles has yielded highly ordered crystalline matter in 2D and 3D. The most well-studied 3D tile is the DNA tensegrity triangle, which is known to self-assemble into macroscopic crystals. However, contemporary rational design parameters for 3D DNA crystals nearly universally invoke integer numbers of DNA helical turns and Watson–Crick (WC) base pairs. Here, in this study, 24-bp edges are substituted into a previously 21-bp (two helical turns of DNA) tensegrity triangle motif to explore whether such unconventional motif can self-assemble into 3D crystals. The use of noncanonical base pairs in the sticky ends results in a cubic arrangement of tensegrity triangles with exceedingly high symmetry, assembling a lattice from winding helical axes and diamond-like tessellation patterns. Reverting this motif to sticky ends with Watson–Crick pairs results in a trigonal hexagonal arrangement, replicating this diamond arrangement in a hexagonal context. These results showcase that the authors can generate unexpected, highly complex, pathways for materials design by testing modifications to 3D tiles without prior knowledge of the ensuing symmetry. This study expands the rational design toolbox for DNA nanotechnology; and it further illustrates the existence of yet-unexplored arrangements of crystalline soft matter.
Magnetic dipolar interaction between nanoparticles affects the relaxation time and consequently the superparamagnetic behavior of the assembly. Understanding how the relaxation mechanisms depend on the interaction is important due to the wide use of these materials in the different fields of nanotechnology. In this work we have investigated the effect of dipolar interaction on superparamagnetic behavior of magnetic particle assemblies. The interaction was considered through an interaction magnetic field and was calculated using the mean field model. The relaxation time of an interacting system can be written in two equivalent ways, the first as a perturbation in the energy barrier of the isolated particle and the second as a perturbation in the thermal energy. With this equivalence, it was possible to determine that the shift in the blocking temperature is associated with the type of interaction that predominates in the assembly. Blocking temperature increases (decreases) if ferromagnetic (antiferromagnetic) interaction is the dominant interaction.