Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Accelerator Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Highly periodic laser-induced nanostructures on thin Ti and Cu foils for potential application in laser ion acceleration

The feasibility of femtosecond laser-induced periodic nanostructures on thin Ti and Cu foils (thickness down to 1 μm) is demonstrated. At pulse durations of 120 fs and a wavelength of 400 nm, periods of 61 nm to 320 nm were obtained. Particle-in-cell simulations of laser ion acceleration processes with such nanostructured targets indicate their potential for high energy particle physics applications. In particular, a measurable enhancement of the proton cut-off energy and a significant enhancement of the number of accelerated particles compared to non- or weakly structured targets of same thickness and material are expected.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

TH-C-12A-08: New Compact 10 MV S-Band Linear Accelerator: 3D Finite-Element Design and Monte Carlo Dose Simulations

Purpose: To design a new compact S-band linac waveguide capable of producing a 10 MV x-ray beam, while maintaining the length (27.5 cm) of current 6 MV waveguides. This will allow higher x-ray energies to be used in our linac-MRI systems with the same footprint. Methods: Finite element software COMSOL Multiphysics was used to design an accelerator cavity matching one published in an experiment breakdown study, to ensure that our modeled cavities do not exceed the threshold electric fields published. This cavity was used as the basis for designing an accelerator waveguide, where each cavity of the full waveguide was tuned to resonate at 2.997 GHz by adjusting the cavity diameter. The RF field solution within the waveguide was calculated, and together with an electron-gun phase space generated using Opera3D/SCALA, were input into electron tracking software PARMELA to compute the electron phase space striking the x-ray target. This target phase space was then used in BEAM Monte Carlo simulations to generate percent depth doses curves for this new linac, which were then used to re-optimize the waveguide geometry. Results: The shunt impedance, Q-factor, and peak-to-mean electric field ratio were matched to those published for the breakdown study to within 0.1% error. After tuning the full waveguide, the peak surface fields are calculated to be 207 MV/m, 13% below the breakdown threshold, and a d-max depth of 2.42 cm, a D10/20 value of 1.59, compared to 2.45 cm and 1.59, respectively, for the simulated Varian 10 MV linac and brehmsstrahlung production efficiency 20% lower than a simulated Varian 10 MV linac. Conclusion: This work demonstrates the design of a functional 27.5 cm waveguide producing 10 MV photons with characteristics similar to a Varian 10 MV linac.

07 ISOTOPE AND RADIATION SOURCES↗
NASA NTRS1992

Particle acceleration in cosmic plasmas; Proceedings of the Workshop, Bartol Research Inst., Newark, DE, Dec. 4-6, 1991

The present volume on particle acceleration in cosmic plasmas discusses transport theory, particle acceleration in the sun, heliosphere, and galaxy, particle acceleration at nonrelativistic shocks, and stochastic particle acceleration. Attention is given to particle acceleration in relativistic flows and shocks, simulations, composition and sources of high-energy cosmic rays, electron acceleration, and observation priorities and perspectives. Topics addressed include particle acceleration in the magnetosphere, particle transport from a turbulence perspective, numerical simulations of time-dependent cosmic ray mediated shocks, and solar flare plasma. Also discussed are relativistic shock waves and the excitation of plerions, ion acceleration at collisionless shock interactions, ultrahigh-energy cosmic rays from Fanaroff Riley, and constraints on electron acceleration in the Crab Nebula.

Zank, G. P.↗
DOE OSTI2023

Ultra-short pulse laser acceleration of protons to 80 MeV from cryogenic hydrogen jets tailored to near-critical density

Laser plasma-based particle accelerators attract great interest in fields where conventional accelerators reach limits based on size, cost or beam parameters. Despite the fact that particle in cell simulations have predicted several advantageous ion acceleration schemes, laser accelerators have not yet reached their full potential in producing simultaneous high-radiation doses at high particle energies. The most stringent limitation is the lack of a suitable high-repetition rate target that also provides a high degree of control of the plasma conditions required to access these advanced regimes. Here, we demonstrate that the interaction of petawatt-class laser pulses with a pre-formed micrometer-sized cryogenic hydrogen jet plasma overcomes these limitations enabling tailored density scans from the solid to the underdense regime. Our proof-of-concept experiment demonstrates that the near-critical plasma density profile produces proton energies of up to 80 MeV. Based on hydrodynamic and three-dimensional particle in cell simulations, transition between different acceleration schemes are shown, suggesting enhanced proton acceleration at the relativistic transparency front for the optimal case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Recent progress on the mesoscale modeling of architected thin-films via phase-field formulations of physical vapor deposition

Thin-film coatings can be found everywhere in modern technological applications due to desirable electrical, mechanical, chemical, and optical properties. These properties directly depend upon the thin-film’s microstructural features, which are themselves influenced by the materials and vapor-deposition processing conditions used for fabrication. As such, understanding processing-microstructure relationships is essential to designing thin-films with optimized properties, and discovering new processing conditions that allow for novel thin-films with multifunctional microstructures. Here, a short review is presented on recent developments that utilize the phase-field method to simultaneously model the vapor-deposition process and corresponding microstructure formation at the mesoscale. Also phase-field-based vapor-deposition models that simulate thin-film growth of immiscible alloy and polycrystalline systems are highlighted in addition to machine-learning-based surrogate models that can facilitate accelerated high-fidelity simulations along with materials design and exploration studies.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Supporting Simulation Families in Nuclear Reactor Workflows SBIR Phase I. Final Scientific/Technical Report

The US Department of Energy’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) Toolkit has accelerated both the solutions to existing problems and deployment of new designs for current and advanced reactors. Within the toolkit, there exist various families of simulation tools that target specific aspects of a multi-physics simulation for a nuclear reactor. Tools within a specific family vary in both complexity and fidelity as well as the types of resources they require. To complement the NEAMS effort, the Computational Model Builder (CMB) has been designed to provide a graphical user interface to design and execute nuclear reactor workflows. Previously, we had designed a workflow in CMB to design and prepare for execution a neutronics simulation using DIF3D, a diffusion and transport solver developed at Argonne National Laboratory. For this Phase I effort, we extended CMB’s reactor modeling tools to design and execute a workflow using Proteus-SN, a higher-fidelity transport solver developed at Argonne with more preparatory requirements from the workflow. Furthermore, this workflow was designed to maximize the common features of the two workflows, describing the analogous tasks between the workflows as belonging to a “simulation family”. This perspective facilitates the abstraction of the neutronics simulations to a single bifurcated workflow, allowing the engineer to design a reactor and then choose the appropriate simulation according to his or her needs for fidelity and computational cost.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS1989

Chromospheric-coronal coupling during solar flares: Current systems and particle acceleration

Two-dimensional (three velocity) electrostatic particle simulations are used to investigate the particle heating and acceleration associated with the impulsive phase of a solar flare. A crossfield current in the high corona (which is presumably driven by reconnection processes) is used to initiate the flare. Due to the differential motion of the electrons and ions, currents, and associated quasi-static electric fields are generated with the primary current and balancing return current being on adjacent field lines. These currents extend from the corona down into the chromosphere. Electrons can be accelerated to energies exceeding 100 keV on short time scales via the quasi-static fields and wave-particle interactions. The spectra of these electrons has a broken power-law distribution which hardens in time. The spatially separate primary and return currents are closed by the cross-field acceleration of the ambient ions into the primary current regions. These ions are then accelerated upwards into the corona by the same quasi-static electric field accelerating the electrons downwards. This acceleration can account for the broadened stationary and weak blue shifted component seen in soft x ray line emissions and enhancements in heavy ion abundances seen in the solar wind in associations with solar flares.

Winglee, Robert M.↗
DOE OSTI2014

Non-thermal electron acceleration in low Mach number collisionless shocks. I. Particle energy spectra and acceleration mechanism

Electron acceleration to non-thermal energies in low Mach number (M{sub s} ≲ 5) shocks is revealed by radio and X-ray observations of galaxy clusters and solar flares, but the electron acceleration mechanism remains poorly understood. Diffusive shock acceleration, also known as first-order Fermi acceleration, cannot be directly invoked to explain the acceleration of electrons. Rather, an additional mechanism is required to pre-accelerate the electrons from thermal to supra-thermal energies, so they can then participate in the Fermi process. In this work, we use two- and three-dimensional particle-in-cell plasma simulations to study electron acceleration in low Mach number shocks. We focus on the particle energy spectra and the acceleration mechanism in a reference run with M{sub s} = 3 and a quasi-perpendicular pre-shock magnetic field. We find that about 15% of the electrons can be efficiently accelerated, forming a non-thermal power-law tail in the energy spectrum with a slope of p ≅ 2.4. Initially, thermal electrons are energized at the shock front via shock drift acceleration (SDA). The accelerated electrons are then reflected back upstream where their interaction with the incoming flow generates magnetic waves. In turn, the waves scatter the electrons propagating upstream back toward the shock for further energization via SDA. In summary, the self-generated waves allow for repeated cycles of SDA, similarly to a sustained Fermi-like process. This mechanism offers a natural solution to the conflict between the bright radio synchrotron emission observed from the outskirts of galaxy clusters and the low electron acceleration efficiency usually expected in low Mach number shocks.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Extreme Longitudinal Compression of Optimized Beams for MEV Ultrafast Electron Diffraction (Final Technical Report)

We worked out the design of a high repetition rate MeV energy ultrafast electron diffraction instrument based on the existing Cornell photoinjector, which can readily be applied to the presented findings. This example is a blueprint of other similarly arranged UED setups. Using particle tracking simulations in conjunction with multiobjective genetic algorithm optimization, we explored the smallest bunch lengths, emittance, and probe spot sizes achievable. As two limits, we defined stroboscopic conditions (with single electrons per pulse) and operation with 10 5 electrons per bunch which may be suitable for single-shot diffraction images. In the stroboscopic case, the flexibility provided by the many cavity bunching and acceleration allows for longitudinal phase space linearization without a higher harmonic field, providing sub-fs bunch lengths at the sample. Given low emittance photoemission conditions, these small bunch lengths can be maintained with probe transverse sizes at the single micron (1 μm) scale and below. In the case of 10 5 electrons per pulse, we simulated state-of-the-art 5D brightness conditions: rms bunch lengths of 10 fs with 3-nm normalized emittances, while permitting repetition rates as high as 1.3 GHz. We showed that in conjunction with collimating apertures, a novel focusing scheme achieves very high-quality emittance compensation for the central core of the beam composing 40% of particles, for a resulting beam size of 5 μm (rms). Finally, to aid in the design of new SRF-based ultrafast electron diffraction machines, we simulated the trade-off between the number of cavities used and achievable bunch length and emittance. In the longitudinal dimension, we made use of the fact that MeV UED requires much lower energy than the 15-MeV maxi mum energy of Cornell’s CBETA injector, and we may therefore use several of the SRF cavities for bunch length compression. In practice, we used a genetic optimization algorithm to choose the phases and amplitudes of the cavities appropriately for optimal bunching. In the zero space charge case, we found that bunching and acceleration are distributed across the six cavities in a way that produces a linearizing effect. And we showed that the ultimate bunch length can be limited by time-of-flight differences arising from transverse size and transverse momentum spread. The space charge code developed and used for this development is now permanent part of the Bmad accelerator simulation code and has already contributed to other developments, e.g., for the EIC electron cooler design.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

Simulation of Conduction Cooled SRF Cavity

SRF cavities are used heavily in high energy physics research, but the operational complexities of SRF cavities prevent their widespread use in industry. One notable complexity of operating an SRF cavity is liquid helium coolant, and replacing liquid helium with cryocooler conduction cooling is an important research and development interest. As part of this effort, a system consisting of a 650 MHz single cell cavity, a commercial grade pulse tube refrigerator, and a thermal conduction link was simulated through finite element analysis. The electromagnetic fields inside the cavity, heat flow through the system, and temperature distribution of the thermal link and cavity were calculated. Based on the simulation, we found that a 2 W @ 4.2 K pulse tube refrigerator is capable of cooling a single cell Nb 3 Sn coated cavity operating at up to 12 MV/m accelerating gradient. The maximum simulated temperature of the cavity was below 7 K, and the thermal conduction link was shown to significantly attenuate the cryocooler thermal oscillations at the location of the cavity

43 PARTICLE ACCELERATORS↗
NASA NTRS1996

Gravitational acceleration as a cue for absolute size and distance?

When an object's motion is influenced by gravity, as in the rise and fall of a thrown ball, the vertical component of acceleration is roughly constant at 9.8 m/sec2. In principle, an observer could use this information to estimate the absolute size and distance of the object (Saxberg, 1987a; Watson, Banks, von Hofsten, & Royden, 1992). In five experiments, we examined people's ability to utilize the size and distance information provided by gravitational acceleration. Observers viewed computer simulations of an object rising and falling on a trajectory aligned with the gravitational vector. The simulated objects were balls of different diameters presented across a wide range of simulated distances. Observers were asked to identify the ball that was presented and to estimate its distance. The results showed that observers were much more sensitive to average velocity than to the gravitational acceleration pattern. Likewise, verticality of the motion and visibility of the trajectory's apex had negligible effects on the accuracy of size and distance judgments.

NASA Discipline Space Human Factors↗
NASA NTRS1960

Physiological Effects of Acceleration Observed During a Centrifuge Study of Pilot Performance

An investigation was conducted by the National Aeronautics and Space Administration, Ames Research Center, and the Naval Air Development Center, Aviation Medical Acceleration Laboratory, to study the effects of acceleration on pilot performance and to obtain some meaningful data for use in establishing tolerance to acceleration levels. The flight simulator used in the study was the Johnsville centrifuge operated as a closed loop system. The pilot was required to perform a control task in various sustained acceleration fields typical of those that Might be encountered by a pilot flying an entry vehicle in which he is seated in a forward-facing position. A special restraint system was developed and designed to increase the pilot's tolerance to these accelerations. The results of this study demonstrated that a well-trained subject, such as a test pilot, can adequately carry out a control task during moderately high accelerations for prolonged periods of time. The maximum levels of acceleration tolerated were approximately 6 times that of gravity for approximately 6 minutes, and varied slightly with the acceleration direction. The tolerance runs were in each case terminated by the subject. In all but two instances, the cause was extreme fatigue. On two occasions the subject terminated the run when he "grayed out." Although there were subjective and objective findings involving the visual and cardiovascular systems, the respiratory system yielded the more critical limiting factors. It would appear that these limiting factors were less severe during the "eyeballs-out" accelerations when compared with the "eyeballs-in" accelerations. These findings are explained on the basis of the influence that the inertial forces of acceleration have on the mechanics of respiration. A condensed version of this report was presented at the Annual Meeting of the Aerospace Medical Association, Miami Beach, May 5-11, 1960, in a paper entitled "Ability of Pilots to Perform a Control Task in Various Sustained Acceleration Fields."

Smedal, Harald A.↗
DOE OSTI2020

Generation of focusing ion beams by magnetized electron sheath acceleration

Abstract We present the first 3D fully kinetic simulations of laser driven sheath-based ion acceleration with a kilotesla-level applied magnetic field. The application of a strong magnetic field significantly and beneficially alters sheath based ion acceleration and creates two distinct stages in the acceleration process associated with the time-evolving magnetization of the hot electron sheath. The first stage delivers dramatically enhanced acceleration, and the second reverses the typical outward-directed topology of the sheath electric field into a focusing configuration. The net result is a focusing, magnetic field-directed ion source of multiple species with strongly enhanced energy and number. The predicted improvements in ion source characteristics are desirable for applications and suggest a route to experimentally confirm magnetization-related effects in the high energy density regime. We additionally perform a comparison between 2D and 3D simulation geometry, on which basis we predict the feasibility of observing magnetic field effects under experimentally relevant conditions.

42 ENGINEERING↗
DOE OSTI2016

Predicting mesoscale microstructural evolution in electron beam welding

Using the kinetic Monte Carlo simulator, Stochastic Parallel PARticle Kinetic Simulator, from Sandia National Laboratories, a user routine has been developed to simulate mesoscale predictions of a grain structure near a moving heat source. Here, we demonstrate the use of this user routine to produce voxelized, synthetic, three-dimensional microstructures for electron-beam welding by comparing them with experimentally produced microstructures. When simulation input parameters are matched to experimental process parameters, qualitative and quantitative agreement for both grain size and grain morphology are achieved. The method is capable of simulating both single- and multipass welds. As a result, the simulations provide an opportunity for not only accelerated design but also the integration of simulation and experiments in design such that simulations can receive parameter bounds from experiments and, in turn, provide predictions of a resultant microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Improving the Quasi‐Biennial Oscillation via a Surrogate‐Accelerated Multi‐Objective Optimization

Accurate simulation of the quasi-biennial oscillation (QBO) is challenging due to uncertainties in representing convectively generated gravity waves. We develop an end-to-end uncertainty quantification workflow that calibrates these gravity wave processes in E3SM for a realistic QBO. Central to our approach is a domain knowledge-informed, compressed representation of high-dimensional spatio-temporal wind fields. By employing a parsimonious statistical model that learns the fundamental frequency from complex observations, we extract interpretable and physically meaningful quantities capturing key attributes. Building on this, we train a probabilistic surrogate model that approximates the fundamental characteristics of the QBO as functions of critical physics parameters governing gravity wave generation. Leveraging the Karhunen–Loève decomposition, our surrogate efficiently represents these characteristics as a set of orthogonal features, capturing cross-correlations among multiple physics quantities evaluated at different pressure levels and enabling rapid surrogate-based inference at a fraction of the computational cost of full-scale simulations. Finally, we analyze the inverse problem using a multi-objective approach. Our study reveals a tension between amplitude and period that constrains the QBO representation, precluding a single optimal solution. To navigate this, we quantify the bi-criteria trade-off and generate a set of Pareto optimal parameter values that balance the conflicting objectives. This integrated workflow improves the fidelity of QBO simulations and offers a versatile template for uncertainty quantification in complex geophysical models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

First Estimation of Model Parameters for Neutrino-Induced Nucleon Knockout Using Simulation-Based Inference

To enable an accurate determination of oscillation parameters, accelerator-based neutrino experiments require detailed simulations of nuclear interaction physics in the GeV regime. While substantial effort from both theory and experiment is currently being invested to improve the fidelity of these simulations, their present deficiencies typically oblige experimental collaborations to resort to empirical tuning of simulation model parameters. As the precision requirements of the field continue to become more stringent, machine learning techniques may provide a powerful means of handling corresponding growth in the complexity of future neutrino interaction model tuning exercises. To study the suitability of simulation-based inference (SBI) for this physics application, in this paper we revisit a tuned configuration of the GENIE neutrino event generator that was originally developed by the MicroBooNE collaboration. Despite closely reproducing the adopted values of four physics parameters when confronted with the tuned cross-section predictions as input, we find that our trained SBI algorithm prefers modestly different values (within MicroBooNE's assigned uncertainties) and achieves slightly better goodness-of-fit when inference is run on the experimental data set originally used by MicroBooNE. We also find that our trained algorithm can create a fair approximation of an alternative neutrino scattering simulation, NuWro, that shares only a subset of its physics model parameters with GENIE.

Tame-Narvaez, Karla [Fermilab] (ORCID:000000022249↗
DOE OSTI2021

Fission Product Transport in TRISO Particles and Pebbles

This document demonstrates completion of the goals described in the technical narrative of the FOA project titled: ”Modeling and Simulation Development Pathways to Accelerating KP-FHR Licensing” regarding fission product transport in the Kairos-proposed fuel pebble by INL and Kairos Power. Showcased in this report are code developments and simulations in BISON that extend the state of the art in computation and understanding of fission product transport in a TRISO fuel particle and pebble. These enhancements lay the foundation for making predictions of fission product transport that can be used as input in the fuel licensing process. This was achieved by installing existing fuel material models originally used in PARFUME, developing a new failure probability method that is efficient and multi-dimensional, employing material homogenization, and expanding verification and validation simulations to demonstrate the efficacy of the work. All this work is leveraged to spotlight the main deliverable; a three-dimensional model and corresponding demonstration simulation of a pebble, which will serve as the starting point for models used to predict fission product release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Fission Product Transport in TRISO Particles and Pebbles

This document demonstrates completion of the goals described in the technical narrative of the FOA project titled: ”Modeling and Simulation Development Pathways to Accelerating KP-FHR Licensing” regarding fission product transport in the Kairos-proposed fuel pebble by INL and Kairos Power. Showcased in this report are code developments and simulations in BISON that extend the state of the art in computation and understanding of fission product transport in a TRISO fuel particle and pebble. These enhancements lay the foundation for making predictions of fission product transport that can be used as input in the fuel licensing process. This was achieved by installing existing fuel material models originally used in PARFUME, developing a new failure probability method that is efficient and multi-dimensional, employing material homogenization, and expanding verification and validation simulations to demonstrate the efficacy of the work. All this work is leveraged to spotlight the main deliverable; a three-dimensional model and corresponding demonstration simulation of a pebble, which will serve as the starting point for models used to predict fission product release.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗