Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “7”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Assessment of the Short-Term Radiometric Stability between Terra MODIS and Landsat 7 ETM+ Sensors

The Landsat 7 (L7) Enhanced Thematic Mapper (ETM+) sensor was launched on April 15th, 1999 and has been in operation for over nine years. It has six reflective solar spectral bands located in the visible and shortwave infrared part of the electromagnetic spectrum (0.5 - 2.5 micron) at a spatial resolution of 30 m. The on-board calibrators are used to monitor the on-orbit sensor system changes. The ETM+ performs solar calibrations using on-board Full Aperture Solar Calibrator (FASC) and the Partial Aperture Solar Calibrator (PASC). The Internal Calibrator Lamp (IC) lamps, a blackbody and shutter optics constitute the on-orbit calibration mechanism for ETM+. On 31 May 2003, a malfunction of the scan-line corrector (SLC) mirror assembly resulted in the loss of approximately 22% of the normal scene area. The missing data affects most of the image with scan gaps varying in width from one pixel or less near the centre of the image to 14 pixels along the east and west edges of the image, creating a wedge-shaped pattern. However, the SLC failure has no impacts on the radiometric performance of the valid pixels. On December 18, 1999, the Moderate Resolution Imaging Spectroradiometer (MODIS) Proto-Flight Model (PFM) was launched on-board the NASA's EOS Terra spacecraft. Terra MODIS has 36 spectral bands with wavelengths ranging from 0.41 to 14.5 micron and collects data over a wide field of view angle (+/-55 deg) at three nadir spatial resolutions of 250 m, 500 in 1 km for bands 1 to 2, 3 to 7, and 8 to 36, respectively. It has 20 reflective solar bands (RSB) with spectral wavelengths from 0.41 to 2.1 micron. The RSB radiometric calibration is performed by using on-board solar diffuser (SD), solar diffuser stability monitor (SDSM), space-view (SV), and spectro-radiometric calibration assembly (SRCA). Through the SV port, periodic lunar observations are used to track radiometric response changes at different angles of incidence (AOI) of the scan mirror. As a part of the AM Constellation satellites, Terra MODIS flies approximately 30 minutes behind L7 ETM+ in the same orbit. The orbit of L7 is repetitive, circular, sunsynchronous, and near polar at a nominal altitude of 705 km (438 miles) at the Equator. The spacecraft crosses the Equator from north to south on a descending node between 10:00 AM and 10:15 AM. Circling the Earth at 7.5 km/sec, each orbit takes nearly 99 minutes. The spacecraft completes just over 14 orbits per day, covering the entire Earth between 81 degrees north and south latitude every 16 days. The longest continuous imaging swath that L7 sensor can collect is for a 14-minute subinterval contact period which is equivalent to 35 full WRS-2 scenes. On the other hand, Terra can provide the entire corresponding orbit with wider swath at any given ETM+ collection without contact time limitation. There are six spectral matching band pairs between MODIS (bands 3, 4, 1, 2, 6, 7) and ETM+ (bands 1, 2, 3, 4, 5, 7) sensor. MODIS has narrower spectral responses than ETM+ in all the bands. A short-term radiometric stability was evaluated using continuous ETM+ scenes within the contact period and the corresponding half orbit MODIS scenes. The near simultaneous earth observations (SNO) were limited by the smaller swath size of ETM+ (187 km) as compared to MODIS (2330 km). Two sets of continuous granules for MODIS and ETM+ were selected and mosaiced based on pixel geolocation information for non cloudy pixels over the North American continent. The Top-of- Atmosphere (TOA) reflectances were computed for the spectrally matching bands between ETM+ and MODIS over the regions of interest (ROI). The matching pixel pairs were aggregated from a finer to a coarser pixel resolution and the TOA reflectance values covering a wide dynamic range of the sensors were compared and analyzed. Considering the uncertainties of the absolute calibration of the both sensors, radiometric stability was verified for the band pairs. The Railroad Valley Playa, Nada (RVPN) was included in the path of this continuous orbit, which served as a verification point between the shortterm and the long-term trending results from previous studies. This work focuses on monitoring the short-term on-orbit stability of MODIS and the ETM+ RSB. It also provides an assessment of the absolute calibration differences between the two sensors over their wide dynamic ranges.

Choi, Taeyoung↗

Performance Testing of Lidar Components Subjected to Space Exposure in Space via MISSE 7 Mission

.The objective of the Materials International Space Station Experiment (MISSE) is to study the performance of novel materials when subjected to the synergistic effects of the harsh space environment for several months. MISSE missions provide an opportunity for developing space qualifiable materials. Several laser and lidar components were sent by NASA Langley Research Center (LaRC) as a part of the MISSE 7 mission. The MISSE 7 module was transported to the international space station (ISS) via STS 129 mission that was launched on Nov 16, 2009. Later, the MISSE 7 module was brought back to the earth via the STS 134 that landed on June 1, 2011. The MISSE 7 module that was subjected to exposure in space environment for more than one and a half year included fiber laser, solid-state laser gain materials, detectors, and semiconductor laser diode. Performance testing of these components is now progressing. In this paper, the current progress on post-flight performance testing of a high-speed photodetector and a balanced receiver is discussed. Preliminary findings show that detector characteristics did not undergo any significant degradation.

Prasad, Narasimha S.↗

Overview of the MISSE 7 Polymers and Zenith Polymers Experiments After 1.5 Years of Space Exposure

As part of the Materials International Space Station Experiment 7 (MISSE 7), two experiments called the Polymers Experiment and the Zenith Polymers Experiment were flown on the exterior of the International Space Station (ISS) and exposed to the low Earth orbit (LEO) space environment for 1.5 years. The Polymers Experiment contained 47 samples, which were flown in a ram or wake flight orientation. The objectives of the Polymers Experiment were to determine the LEO atomic oxygen erosion yield (Ey, volume loss per incident oxygen atoms, given in cu cm/atom) of the polymers, and to determine if atomic oxygen erosion of high and low ash containing polymers is dependent on fluence. The Zenith Polymers Experiment was flown in a zenith flight orientation. The primary objective of the Zenith Polymers Experiment was to determine the effect of solar exposure on the erosion of fluoropolymers. Kapton H (DuPont, Wilmington, DE) was flown in each experiment for atomic oxygen fluence determination. This paper provides an introduction to both the MISSE 7 Polymers Experiment and the MISSE 7 Zenith Polymers Experiment, and provides initial erosion yield results.

Yi, Grace T.↗

History of NASA's Determination of Offgassed Products (Test 7)

NASA's Determination of Offgassed Products (Test 7) from materials and assembled articles for spaceflight has evolved since the Apollo program for over 50 years to meet various habitable spacecraft nonmetallic programmatic requirements. Now mandated by NASA STD-6016A, Standard Materials and Processes Requirements for Spacecraft, all nonmetallic materials used in habitable flight compartments, with the exception of ceramics, metal oxides, inorganic glasses, and materials used in sealed containers, must meet the offgassing requirements in NASA-STD-6001B Test 7. This manuscript presents the history of Test 7, beginning with the Apollo spacecraft nonmetallic materials selection guidelines and test requirements in 1967, in which tests were performed in mostly oxygen atmospheres. It progresses through Skylab, Space Shuttle, International Space Station nonmetals testing, and acceptance requirements with milder test environments. This review of the history of Test 7 presents the reader with a perspective on the development and changes undergone since inception to the present. Related NASA standard tests (some now former, discontinued, combined, or supplemental) including Test 6, Odor Assessment, Test 16, Determination of Offgassed Products from Assembled Articles, and Test 12, Total Spacecraft Cabin Offgassing, are discussed in context

Greene, Benjamin↗

Theoretical Prediction of Thermal Expansion Anisotropy for Y 2 Si 2 O 7 Environmental Barrier Coatings Using a Deep Neural Network Potential and Comparison to Experiment

Environmental barrier coatings (EBCs) are an enabling technology for silicon carbide (SiC)-based ceramic matrix composites (CMCs) in extreme environments such as gas turbine engines. However, development of new coating systems is hindered by the large design space and difficulty in predicting properties for these materials. Density Functional Theory (DFT) has successfully been used to model and predict some thermodynamic and thermo-mechanical properties of high-temperature ceramics for EBCs, although these calculations are challenging due to their high computational costs. In this work, we use machine learning to train a deep neural network potential (DNP) for Y 2 Si 2 O 7 , which is then applied to calculate thermodynamic and thermo-mechanical properties at near-DFT accuracy much faster and using less computational resources than DFT. We use this DNP to predict phonon-based thermodynamic properties of Y 2 Si 2 O 7 with good agreement to DFT and experiments. We also utilize the DNP to calculate the anisotropic, lattice direction-dependent coefficients of thermal expansion (CTEs) for Y 2 Si 2 O 7 . Molecular dynamics trajectories using the DNP correctly demonstrate accurate prediction of the anisotropy of the CTE in good agreement with diffraction experiments. In the future, this DNP could be applied to accelerate additional property calculations for Y 2 Si 2 O 7 compared to DFT or experiments.

rare earth silicates↗

Yb{sub 5}Ni{sub 4}Sn{sub 10} and Yb{sub 7}Ni{sub 4}Sn{sub 13}: New polar intermetallics with 3D framework structures

The title compounds have been obtained by solid state reactions of the corresponding pure elements at high temperature, and structurally characterized by single-crystal X-ray diffraction studies. Yb{sub 5}Ni{sub 4}Sn{sub 10} adopts the Sc{sub 5}Co{sub 4}Si{sub 10} structure type and crystallizes in the tetragonal space group P4/mbm (No. 127) with cell parameters of a=13.785(4) A, c=4.492 (2) A, V=853.7(5) A{sup 3}, and Z=2. Yb{sub 7}Ni{sub 4}Sn{sub 13} is isostructural with Yb{sub 7}Co{sub 4}InGe{sub 12} and crystallizes in the tetragonal space group P4/m (No. 83) with cell parameters of a=11.1429(6) A, c=4.5318(4) A, V=562.69(7) A{sup 3}, and Z=1. Both structures feature three-dimensional (3D) frameworks based on three different types of one-dimensional (1D) channels, which are occupied by the Yb atoms. Electronic structure calculations based on density functional theory (DFT) indicate that both compounds are metallic. These results are in agreement with those from temperature-dependent resistivity and magnetic susceptibility measurements. - Graphical abstract: Two new ytterbium nickel stannides, namely, Yb{sub 5}Ni{sub 4}Sn{sub 10} and Yb{sub 7}Ni{sub 4}Sn{sub 13}, have been synthesized and structurally characterized by single-crystal X-ray diffraction studies. Both their structures feature three-dimensional (3D) frameworks based on three different types of one-dimensional (1D) channels, which are situated by all the Yb atoms. Electronic structure calculations based on density functional theory (DFT) indicate that both compounds are metallic, which are in accordance with the results from temperature-dependent resistivity and magnetic susceptibility measurements.

36 MATERIALS SCIENCE↗

Experimental Determination of the {sup 6,7}Li Nucleon Densities

In this work we present optical model analysis of new near barrier-quasi-elastic experimental data, for the systems {sup 6,7}Li+{sup 120}Sn. From the analysis it was possible to extract the ground state nucleon densities of the weakly bound {sup 6,7}Li isotopes. The apparent discrepancies between the experimental densities, as compared with those based on Dirac-Hartree-Fock-Bouguliubov (DHB) calculations were removed, considering in the reaction mechanism, the projectile break-up and a positive polarization from couplings of {sup 6,7}Li states of the continuum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analysis of the elastic scattering measured with a 23.7 MeV {sup 7}Be beam on a {sup 9}Be target

We present new data for the reaction {sup 7}Be+{sup 9}Be measured at E{sub lab} = 23.7 MeV. The elastic scattering angular distribution has been analyzed using the phenomenological optical model and the coupled-channels method. In the latter approach, we assumed a two-cluster model of the {sup 7}Be nucleus, and we included explicitly the ground state and first excited state of this nucleus. The contribution of the inelastic excitation of the {sup 7}Be nucleus to the quasielastic cross sections has been investigated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Elastic scattering measurements for {sup 7}Be+{sup 27}Al system at RIBRAS facility

Elastic scattering angular distribution measurements of {sup 7}Be+{sup 27}Al system were performed at the laboratory energy of 15.6 MeV. The {sup 7}Be secondary beam was produced by the proton transfer reaction {sup 3}He({sup 6}Li,{sup 7}Be) and impinged on {sup 27}Al and {sup 197}Au targets, using the Radioactive Ion Beam (RIB) facility, RIBRAS. The elastic angular distribution was obtained within the angular range of 15{sup 0} - 80{sup 0} at the center of mass frame. Optical model calculations have been performed using the Woods- Saxon form factors and the Sao Paulo potential to fit the experimental data. The total reaction cross section was derived.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

THEORETICAL ESTIMATES OF STELLAR e {sup -} CAPTURES. I. THE HALF-LIFE OF {sup 7}Be IN EVOLVED STARS

The enrichment of Li in the universe is still unexplained, presenting various puzzles to astrophysics. One open issue is that of obtaining reliable estimates for the rate of e {sup -} captures on {sup 7}Be for T and {rho} conditions that are different from the solar ones. This is of crucial importance for modeling the Galactic nucleosynthesis of Li. In this framework, we present here a new theoretical method for calculating the e {sup -} capture rate in typical conditions for evolved stars. Furthermore, we show how our approach compares with state-of-the-art techniques for solar conditions, where various estimates are available. Our computations include (1) 'traditional' calculations of the electronic density at the nucleus, to which the e {sup -} capture rate for {sup 7}Be is proportional, for different theoretical approaches including the Thomas-Fermi, Poisson-Boltzmann, and Debye-Hueckel (DH) models of screening; and (2) a new computation, based on a formalism that goes beyond the previous ones, adopting a mean-field 'adiabatic' approximation to the scattering process. The results obtained with the new approach as well as with traditional ones and their differences are discussed in some detail, starting from solar conditions, where our approach and the DH model essentially converge to the same solution. We then analyze the applicability of both our method and the DH model to a rather broad range of T and {rho} values, embracing those typical of red giant stars, where both bound and continuum states contribute to the capture. We find that over a wide region of the parameter space explored, the DH approximation does not really stand, so that the more general method we suggest should be preferred. As a first application, we briefly reanalyze the {sup 7}Li abundances in red giant branch and asymptotic giant branch stars of the Galactic disk in light of a revision in the Be decay only; however, we emphasize that the changes we find in the electron density at the nucleus would also induce effects on the electron screening (for p-captures on Li itself, as well as for other nuclei) so that our new approach might have rather wide astrophysical consequences.

79 ASTRONOMY AND ASTROPHYSICS↗

Fragmentation of {sup 7}Li relativistic nuclei on a proton into the {sup 3}H + {sup 4}He channel

In a track nuclear photoemulsion exposed to a beam of {sup 7}Li nuclei accelerated to a momentum of 3 GeV/c per nucleon at the synchrophasotron of the Joint Institute for Nuclear Research (JINR, Dubna), 13 events in which {sup 7}Li nuclei interacting with protons break up into {sup 3}H and {sup 4}He fragments were detected among 3730 inelastic-interaction events. For this fragmentation channel, the cross section was found to be 8 {+-} 2 mb. The average value of the fragment total transverse momentum was 214 {+-} 5 MeV/c. This value exceeds markedly the average value of the transverse-momentum transfer in the coherent dissociation of {sup 7}Li nuclei on track-emulsion nuclei (166{+-}5MeV/c). The recoil-proton transverse momentum was on average 98% of the total proton momentum. The longitudinal-momentum distribution of protons was characterized by a variance of 16 MeV/c and a mean value of 37 {+-} 2MeV/c.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Search for {sup 7}H at RIKEN

Experimental search for the low-lying {sup 7}H resonance was performed in the d({sup 8}He,{sup 3}He){sup 7}H reaction with a {sup 8}He beam at 42A MeV. No well-pronounced peak of {sup 7}H was observed, but the spectrum has some peculiarities at approx2 MeV and approx10.5 MeV above the t+4 n threshold. The d({sup 12}Be,{sup 3}He){sup 11}Li reaction simultaneously measured at 71A MeV showed the population of {sup 11}Li ground state with the c.m.s. cross section of approx =1 mb/sr.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Prediction of {sup 2}D Rydberg energy levels of {sup 6}Li and {sup 7}Li based on very accurate quantum mechanical calculations performed with explicitly correlated Gaussian functions

Very accurate variational nonrelativistic finite-nuclear-mass calculations employing all-electron explicitly correlated Gaussian basis functions are carried out for six Rydberg {sup 2}D states (1s{sup 2}nd, n= 6, Horizontal-Ellipsis , 11) of the {sup 7}Li and {sup 6}Li isotopes. The exponential parameters of the Gaussian functions are optimized using the variational method with the aid of the analytical energy gradient determined with respect to these parameters. The experimental results for the lower states (n= 3, Horizontal-Ellipsis , 6) and the calculated results for the higher states (n= 7, Horizontal-Ellipsis , 11) fitted with quantum-defect-like formulas are used to predict the energies of {sup 2}D 1s{sup 2}nd states for {sup 7}Li and {sup 6}Li with n up to 30.

74 ATOMIC AND MOLECULAR PHYSICS↗

Formation of ultracold {sup 7}Li{sup 85}Rb molecules in the lowest triplet electronic state by photoassociation and their detection by ionization spectroscopy

We report the formation of ultracold {sup 7}Li{sup 85}Rb molecules in the a{sup 3}Σ{sup +} electronic state by photoassociation (PA) and their detection via resonantly enhanced multiphoton ionization (REMPI). With our dual-species Li and Rb magneto-optical trap apparatus, we detect PA resonances with binding energies up to ∼62 cm{sup −1} below the {sup 7}Li 2s {sup 2}S{sub 1/2} + {sup 85}Rb 5p {sup 2}P{sub 1/2} asymptote. In addition, we use REMPI spectroscopy to probe the a{sup 3}Σ{sup +} state and excited electronic 3{sup 3}Π and 4{sup 3}Σ{sup +} states and identify a{sup 3}Σ{sup +} (v″ = 7–13), 3{sup 3}Π (v{sub Π}′ = 0–10), and 4{sup 3}Σ{sup +} (v{sub Σ}′ = 0–5) vibrational levels. Our line assignments agree well with ab initio calculations. These preliminary spectroscopic studies on previously unobserved electronic states are crucial to discovering transition pathways for transferring ultracold LiRb molecules created via PA to deeply bound rovibrational levels of the electronic ground state.

74 ATOMIC AND MOLECULAR PHYSICS↗

Core plasma fueling by fast inward particle transport after hydrogen pellet injection in Wendelstein 7-X

A large database of more than 1000 individual cryogenic hydrogen pellets injected into Wendelstein 7-X for plasma fueling was analyzed to improve the understanding of the three phases of the process: the ablation, deposition and transport of the pellet material. Kilohertz-sampled electron density and temperature measurements revealed a more complex drift behavior than predicted by numerical code simulation. It could be explained by the poloidal plasma E r x B- drift rotation, which plays a significant role in stellarators, but was not previously considered in pellet injection codes like HPI2. The drift results in a fast poloidal rotation of the pellet material around the plasma core, leading to an almost homogeneous deposition over the involved flux surfaces regardless of magnetic high and low field side injection geometry. Additionally, a novel fast inward directed transport mechanism (‘FIT-effect’) was observed. The effect occurs on timescales of tens of milliseconds and cannot be explained by neoclassical transport or diffusion. It might be linked to the turbulence pinch recently found in Wendelstein 7-X. When the FIT-effect occurs, the pellet particles are rapidly transferred from the deposition flux surfaces to the plasma core, causing the plasma density profile to peak, which is beneficial for confinement in Wendelstein 7-X. The large pellet injection database was statistical analyzed with regard to pellet and plasma parameters, which delivered some starting points towards developing an understanding of the physics behind the FIT-effect. The results indicate, that plasma core fueling via pellet injection is largely independent of the injection geometry in stellarators under certain conditions, reducing the technical complexity of the injection system.

Wendelstein 7-X↗

One-neutron removal strength of {sup 7}He into {sup 6}He using the complex scaling method

We study the one-neutron removal strength of the {sup 7}He ground state, which provides us with the {sup 6}He-n component in {sup 7}He. The He isotopes are described on the basis of the {sup 4}He+Xn cluster model (X=1,2,3). The complex scaling method is applied to describe not only the Gamow resonances but also the nonresonant continuum states of valence neutrons, with the correct boundary condition of particle decays. The one-neutron removal strength of {sup 7}He into the unbound states of {sup 6}He is calculated using the complex-scaled Green's function, in which a complex-scaled complete set of {sup 4}He+n+n states is adopted. Using this framework, we investigate resonant and nonresonant contributions of the strength, which individually produce specific structures in the distributions. In addition, we propose a method to obtain the real-value strength using the complex values of spectroscopic factors of Gamow states. As a result, the {sup 6}He(2{sup +}) resonance is found to give the largest contribution.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analysis of deuteron breakup reactions on {sup 7}Li for energies up to 100 MeV

Inclusive nucleon spectra from deuteron breakup reactions on {sup 7}Li are analyzed in terms of the continuum discretized coupled channels theory for the elastic breakup process and the Glauber model for the nucleon stripping process. Both theoretical models use the same phenomenological nucleon optical potential of {sup 7}Li and have no other free parameters. The calculations reproduce well a prominent bump observed around half the incident energy in experimental inclusive spectra of 40-MeV (d,xn) and 100-MeV (d,xp) reactions at forward angles. The analysis shows that the stripping process is more important than the elastic breakup process in deuteron breakup reactions on {sup 7}Li.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental study of the p+{sup 6}Li{yields}{eta}+{sup 7}Be reaction 11.3 MeV above threshold

The cross section for the reaction p+{sup 6}Li{yields}{eta}+{sup 7}Be was measured at an excess energy of 11.28 MeV above threshold by detecting the recoiling {sup 7}Be nuclei. A dedicated set of focal plane detectors was built for the magnetic spectrograph Big Karl and was used for identification and four-momentum measurement of {sup 7}Be. A differential cross section of nb/(d{sigma}/d{Omega})=[0.69{+-}0.20(stat.){+-}0.20(syst.)] sr for the ground state plus 1/2{sup -} was measured. The result is compared to model calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗