Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “well location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Interpretation of Fracture Initiation Points by In-Well Low-Frequency Distributed Acoustic Sensing in Horizontal Wells

Summary Low-frequency distributed acoustic sensing (LF-DAS) exploits the optical phase shift of Rayleigh backscatter in fiber-optic cables to obtain distributed measurements of changes in strain and temperature. Fiber-optic cables are often installed for multistage hydraulic fracture diagnostics in horizontal wells. LF-DAS in an untreated well provides far-field strain measurements, while offset wells are hydraulically fractured. Such a configuration is called crosswell LF-DAS sensing. Crosswell LF-DAS measurements have proved useful in diagnosing fracture hits, fracture azimuth, planarity, cluster efficiency, fracture propagation rates, and the dynamic distance to the fracture front. In contrast, in-well LF-DAS is conducted on the actively fractured well. Due to cool fracture fluid being injected at high injection rates, the strain component of the LF-DAS response is largely obscured by temperature changes. In permanent fiber-optic cable installations, distributed temperature sensing (DTS) is often conducted simultaneously with LF-DAS. An opportunity exists to decouple the temperature and strain components of LF-DAS sensors to observe strain changes on in-well LF-DAS. The LF-DAS response is modeled as linearly dependent on strain and temperature changes. Theoretical LF-DAS temperature and strain sensitivity coefficients are derived based on the changes to the index of refraction and length of the fiber. Using the DTS measurements, temperature changes are computed, smoothed, filtered, and compared to the LF-DAS response. Crossplots of the in-well LF-DAS measurements and temperature changes from DTS measurements far from the actively fractured region are used to validate the theoretical sensitivity coefficients. Uncertainty in the temperature component of the LF-DAS response is quantified. The difficulty in corresponding the different spatial and temporal resolutions of the DTS and LF-DAS measurements is overcome by comparing the responses over a moving temporal and spatial window. If the LF-DAS response at the center of the window agrees with the DTS response within uncertainty, the measurement is filtered out. After filtering, the remaining nonzero in-well LF-DAS measurements are due to changes in strain. The data are then visualized in waterfall plots. The results indicate that the theoretical and observed strain and temperature coefficients agree within 10%. After the temperature component of the in-well LF-DAS response is extracted, the remaining nonzero measurements are located primarily within the actively treated region. Locations with peaks in the strain response are interpreted to indicate fracture initiation points. These fracture initiation points are compared with in-well DTS and high-frequency DAS noise measurements across multiple stages to better understand fracture initiation along the horizontal well.

Engineering↗
NASA NTRS1996

Wake Geometry Measurements and Analytical Calculations on a Small-Scale Rotor Model

An experimental investigation was conducted in the Langley 14- by 22-Foot Subsonic Tunnel to quantify the rotor wake behind a scale model helicopter rotor in forward level flight at one thrust level. The rotor system in this test consisted of a four-bladed fully articulated hub with blades of rectangular planform and an NACA 0012 airfoil section. A laser light sheet, seeded with propylene glycol smoke, was used to visualize the vortex geometry in the flow in planes parallel and perpendicular to the free-stream flow. Quantitative measurements of wake geometric proper- ties, such as vortex location, vertical skew angle, and vortex particle void radius, were obtained as well as convective velocities for blade tip vortices. Comparisons were made between experimental data and four computational method predictions of experimental tip vortex locations, vortex vertical skew angles, and wake geometries. The results of these comparisons highlight difficulties of accurate wake geometry predictions.

Ghee, Terence A.↗
NASA NTRS2002

Factors Affecting the Latitudinal Location of the Intertropical Convergence Zone in a GCM

The dominant role of the latitudinal peak of the sea surface temperature (SST) in determining the latitudinal location of the intertropical convergence zone (ITCZ) is well-known. However, the roles of the other factors are less well-known and are the topic of this study. These other factors include the inertial stability, the interaction between convection and surface fluxes and the interaction between convection and radiation. Since these interactions involve convection, in a model they involve the cumulus parameterization scheme. These factors are studied with a general circulation model with uniform SST and solar angle. Under the aforementioned model settings, the latitudinal location of the ITCZ is the latitude where the balance of two types of attraction on the ITCZ, both due to earth's rotation, exists. Directly related to the Coriolis parameter, the first type pulls the ITCZ toward the equator and is not sensitive to model design changes. Related to the convective circulation, the second type pulls the ITCZ poleward and is sensitive to model design changes. Due to the shape and the magnitude of the attractors, the balance of the two types of attractions is reached either at the equator or more than 10 degrees away from the equator. The former case results in a single ITCZ over the equator and the latter case a double ITCZ straddling the equator.

Chao, Winston C.↗
DOE OSTI2025

Resolution dependence of the turbulent atmospheric boundary layer in global storm-resolving climate simulations

The current generation of state-of-the-art global climate models are being run at increasingly higher horizontal resolutions, with the goal of resolving organised deep convection explicitly. How a kilometre-scale resolution impacts the representation of the atmospheric boundary layer is, however, not well known. Using statistical analysis on global fields as well as high-frequency data at selected locations, produced with the Integrated Forecasting System (IFS) model for the Next Generation Earth-system Models (nextGEMS) project, we investigate the horizontal resolution dependence of some boundary-layer processes. We find that a change in resolution from 9 to 2.8 km causes no substantial changes to boundary-layer properties and processes at most of the locations studied, although some global changes are detected that indicate circulation changes. Small changes to the boundary-layer depth and structure are found in the Tropics. The short simulation length and lack of data for optimal boundary-layer analysis limits the conclusions, especially in relation to the connection between the boundary layer and the atmosphere general circulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Scalable Data-Intensive Geocomputation: A Design for Real-Time Continental Flood Inundation Mapping

The convergence of data-intensive and extreme-scale computing enables an integrated software and data ecosystem for scientific discovery. Developments in this realm will fuel transformative research in data-driven interdisciplinary domains. Geocomputation provides computing paradigms in Geographic Information Systems (GIS) for interactive computing of geographic data, processes, models, and maps. Because GIS is data-driven, the computational scalability of a geocomputation workflow is directly related to the scale of the GIS data layers, their resolution and extent, as well as the velocity of the geo-located data streams to be processed. Unique in high user interactivity and low end-to-end latency requirements, geocomputation applications will dramatically benefit from the convergence of high-end data analytics (HDA) and high-performance computing (HPC). The application level challenge, however, is to identify and eliminate computational bottlenecks that arise along a geocomputation workflow. Indeed, poor scalability at any of the workflow components is detrimental to the entire end-to-end pipeline. Here, we study a large geocomputation use case in flood inundation mapping that handles multiple national-scale geospatial datasets and targets low end-to-end latency. We discuss benefits and challenges for harnessing both HDA and HPC for data-intensive geospatial data processing and intensive numerical modeling of geographic processes. We propose an HDA+HPC geocomputation architecture design that couples HDA (e.g., Spark)-based spatial data handling and HPC-based parallel data modeling. Key techniques for coupling HDA and HPC to bridge the two different software stacks are reviewed and discussed.

Liu, Yan↗
DOE OSTI2020

Day-ahead photovoltaic power production forecasting methodology based on machine learning and statistical post-processing

A main challenge towards ensuring large-scale and seamless integration of photovoltaic systems is to improve the accuracy of energy yield forecasts, especially in grid areas of high photovoltaic shares. The scope of this paper is to address this issue by presenting a unified methodology for hourly-averaged day-ahead photovoltaic power forecasts with improved accuracy, based on data-driven machine learning techniques and statistical post-processing. More specifically, the proposed forecasting methodology framework comprised of a data quality stage, data-driven power output machine learning model development (artificial neural networks), weather clustering assessment (K-means clustering), post-processing output optimisation (linear regressive correction method) and the final performance accuracy evaluation. The results showed that the application of linear regression coefficients to the forecasted outputs of the developed day-ahead photovoltaic power production neural network improved the performance accuracy by further correcting solar irradiance forecasting biases. The resulting optimised model provided a mean absolute percentage error of 4.7% when applied to historical system datasets. Finally, the model was validated both, at a hot as well as a cold semi-arid climatic location, and the obtained results demonstrated close agreement by yielding forecasting accuracies of mean absolute percentage error of 4.7% and 6.3%, respectively. Finally, the validation analysis provides evidence that the proposed model exhibits high performance in both forecasting accuracy and stability.

42 ENGINEERING↗
DOE OSTI2020

Impact of acid site speciation and spatial gradients on zeolite catalysis

This mini-review provides an overview of the current state of acid site control in zeolite catalysts, including methods of synthesis, advanced characterization, and measured effects of acid properties (speciation, concentration, proximity, siting, and spatial distribution) on a variety of commerciallyrelevant reactions. The diversity of aluminum species is described with respect to their location at specific sites in zeolite crystals as well as mesoscopic gradients in elemental composition that give rise to zoned or core-shell architectures. Challenges in the identification of acid siting are highlighted within the context of trial-and-error synthesis methods for a range of aluminosilicate frameworks, which hinder a priori design of catalysts, and limitations in techniques to suitably characterize active sites. Emphasis is also placed on knowledge gaps in zeolite catalysis wherein broad development of structure-performance relationships relies on future advancement of synthesis and analytical methods in parallel with atomistic modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Using X-ray spectrum imaging to quantify fission gas in high-burnup UO2 fuel

Analysis of fission gas bubbles (FGBs) in light-water reactor (LWR) fuel is needed to improve the understanding and predictive capability of fuel evolution under normal- and transient conditions. One of the most important parameters of a FGB is the pressure of the gas, primarily Xe, inside it. Bubble volume and location (inter- vs. intragranular) are important considerations as well. However, experimental analysis of such bubbles is challenging due to their small size and embedded nature, and usefulness of the data requires large numbers be analyzed. This paper proposes a method to measure the pressure of Xe bubbles using X-ray spectrum imaging (XSI) in scanning transmission electron microscopy (STEM). From X-ray generation and instrumental parameters, the number of Xe atoms yielding a given number of Xe L-series X-ray counts is estimated, and then from the estimated volume of the bubble the Xe density is estimated, which can then be converted to pressure via an equation-of-state. We apply the method to XSI datasets from high burnup (HBu) fuel from North Anna 1 reactor in as-irradiated and post-LOCA-test conditions and find Xe pressures in the FGBs clustered around 1 GPa.

Parish, Chad [ORNL] (ORCID:0000000312097439)↗
DOE OSTI2021

Complexity of deformation mechanism in neutron-irradiated 304L austenitic stainless steel at microstructural scale

The deformation mechanisms of neutron-irradiated 304 L stainless steel have been investigated using the in-situ electron backscattered diffraction (EBSD) technique. To decipher the role of irradiation, a detailed analysis was performed on irradiated miniature samples and compared with nonirradiated samples. Furthermore, at three levels of engineering strain, —0.0%, 4.8%, and 14.5%—microstructural features as well as EBSD were recorded at the identical location during in-situ deformation testing. Post-mortem analysis of the EBSD data revealed that the neutron-irradiated samples had higher fractions of the slip bands even at low amounts of deformation. Along with the slip bands, the neutron-irradiated sample showed the twins and martensitic phase formed almost parallel to the slip bands. In addition, the image results also indicated that the formation of twins and phases associated with the slip bands. A detailed mechanistic understanding has been investigated to identify the (111)γ planes orientation with respect to the loading direction associated with the formation of twins and martensite. The newly formed deformation twins and martensite were also found to maintain this relationship when they existed together.

304L austenitic stainless steel↗
DOE OSTI2021

Origin of Electron Boomerang Stripes: Statistical Study

In the outer radiation belt, localized ultralow frequency (ULF) waves can interact with energetic electrons by drift resonance, leading to quasiperiodic oscillations. The oscillations in the pitch angle spectrum can be characterized by either boomerang-shaped or straight stripes. Previous studies have shown that boomerang-shaped stripes evolve from straight ones when electrons drift away from the localized wave interaction region. Based on the time-of-flight technique on the pitch angle-dependent drift velocity, the origin can be remotely identified from the pitch angle dispersion. Here, we report 27 straight stripe events and 86 boomerang-shaped events observed by Van Allen Probes from January 1, 2013, to December 31, 2017. Statistical study shows a good coincidence between the locations of straight ones and traceback regions from boomerang-shaped ones. These locations, mainly located in noon-to-dusk region, coincide well with the plasmaspheric plumes. Thus, localized ULF waves trapped in the plume may result in the preference of localized ULF wave-electron interactions at noon-to-dusk region.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Control of internal transport barriers in magnetically confined tokamak burning plasmas

The initiation, termination, and control of internal transport barriers associated with E × B flow shear near local minima of magnetic shear are examined for burning plasmas to determine if the positive feedback loops between profiles, instability, transport, and flow shear operate in regimes with fusion self-heating. A five-field transport model for the evolution of profiles of density, ion and electron temperature, ion and electron fluctuations, and radial electric field is utilized to examine the efficacy of controls associated with external inputs of heat and particles, including neutral beam injection, RF, pellets, and gas puffing. The response of the plasma to these inputs is studied in the presence of self-heating. The latter is affected by the external inputs and their modification of profiles and is, therefore, not an external control. Provided sufficient external power is applied, internal transport barriers can be created and controlled, both in ion and electron channels. Barrier control is sensitive to the locations of power deposition and pellet ablation, as well as temporal sequencing of external inputs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Impact of error fields and error field correction on heat fluxes in SPARC

Using a single toroidal array of coils to reduce the m,n = 2,1 resonant error field (EF) produced by the misalignment of the axisymmetric coils in SPARC can result in the enhancement of the local divertor heat fluxes. Managing high divertor heat fluxes (q ∥ $\simeq$ 10 GW m -2 ) poses a challenge for compact tokamak devices such as SPARC. The presence of non-axisymmetric magnetic field perturbations adds complexity to the problem by generating intricate 3D edge magnetic topologies that alter the heat flux distributions on the target plates. The aim of this work is to investigate the impact of the EF correction (EFC) on the heat fluxes at the divertor plates in SPARC. The MHD code M3DC1 has been used to simulate the 3D magnetic perturbations generated by the shift and tilt of several axisymmetric coils within specified tolerances, as well as from the array of EFC coils located at the midplane. Using a heuristic model that extends the concept of an axisymmetric heat flux layer to 3D plasmas, the resultant heat flux distributions is derived from magnetic footprints calculated with the MAFOT code. The results show that the EFC could either decrease or further enhance the local heat flux when used to correct the m,n = 2,1 resonant EF to enhance the core plasma performance.

3D fields↗
DOE OSTI2024

Structural and biochemical characterization of the mitomycin C repair exonuclease MrfB

Mitomycin C (MMC) repair factor A (mrfA) and factor B (mrfB), encode a conserved helicase and exonuclease that repair DNA damage in the soil-dwelling bacterium Bacillus subtilis. Here we have focused on the characterization of MrfB, a DEDDh exonuclease in the DnaQ superfamily. We solved the structure of the exonuclease core of MrfB to a resolution of 2.1 Å, in what appears to be an inactive state. In this conformation, a predicted α-helix containing the catalytic DEDDh residue Asp172 adopts a random coil, which moves Asp172 away from the active site and results in the occupancy of only one of the two catalytic Mg 2+ ions. We propose that MrfB resides in this inactive state until it interacts with DNA to become activated. By comparing our structure to an AlphaFold prediction as well as other DnaQ-family structures, we located residues hypothesized to be important for exonuclease function. Using exonuclease assays we show that MrfB is a Mg 2+ -dependent 3'–5' DNA exonuclease. We show that Leu113 aids in coordinating the 3' end of the DNA substrate, and that a basic loop is important for substrate binding. This work provides insight into the function of a recently discovered bacterial exonuclease important for the repair of MMC-induced DNA adducts.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Likelihood-based interactive local docking into cryo-EM maps in ChimeraX

The interpretation of cryo-EM maps often includes the docking of known or predicted structures of the components, which is particularly useful when the map resolution is worse than 4 Å. Although it can be effective to search the entire map to find the best placement of a component, the process can be slow when the maps are large. However, frequently there is a well-founded hypothesis about where particular components are located. In such cases, a local search using a map subvolume will be much faster because the search volume is smaller, and more sensitive because optimizing the search volume for the rotation-search step enhances the signal to noise. A Fourier-space likelihood-based local search approach, based on the previously published em_placement software, has been implemented in the new emplace_local program. Tests confirm that the local search approach enhances the speed and sensitivity of the computations. An interactive graphical interface in the ChimeraX molecular-graphics program provides a convenient way to set up and evaluate docking calculations, particularly in defining the part of the map into which the components should be placed.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Analysis of the Value Proposition of High-Efficiency, Multijunction Solar Modules for Residential Rooftop Installations

Utilizing detailed bottom-up models, we analyze the potential markets for high-efficiency photovoltaic modules in the United States. We first estimate the fraction of area-constrained residential rooftops that could benefit from increasing the availability of high-efficiency systems. We then model the impact of efficiency on installed system costs in these area-constrained scenarios. Finally, we explore the value proposition of high-efficiency, fixed-tilt micro-concentrator photovoltaic modules in a series of case studies of residential customers, modeling the levelized cost of energy, payback period, and annual bill savings. We find that efficiency can provide significant savings in installed system cost and improve value to the solar system owner. The improvement in value depends on location and the size of the rooftop, as well as the ability of a given technology to collect diffuse light and achieve low module costs.

14 SOLAR ENERGY↗
DOE OSTI2024

Tropical root traits in response to global changes from 1984 to 2023

This dataset is a compilation of tropical root traits data in response to different global changes in tropical sites, considering 23.50N and S as latitudinal boundaries. The global changes considered are warming, drought, flooding, cyclones, nitrogen addition, CO2 fertilization, and fire. This dataset contains 266 root trait observations from 93 studies across 24 tropical countries. The full citation from where the data was taken from is provided in the dataset, as well as the global change, the ecosystem type, location, coordinates, the root traits measured, and the direction of their response after the global change. Additional information such as the duration of the experiment, the intensity of the global change, the soil layers from where the roots were collected, the root orders, and the type of experiment are also shown. We obtained this dataset by performing a systematic literature review on Web of Science using standardized keywords in English, Spanish, and Portuguese (Yaffar, Lugli et al. in press).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Macquarie Island Cloud and Radiation Experiment (MICRE) Field Campaign Report

The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility, the Australian Antarctic Division (AAD), and the Australian Bureau of Meteorology (BOM) collaborated in deploying a variety of ground instrumentation to Macquarie Island between March 2016 and March 2018. Macquarie Island is located at 54.5° S, 158.9° E and is well situated for studying clouds over the Southern Ocean. The primary objective of the March 2016 to March 2018 deployment, hereafter the Macquarie Island Cloud and Radiation Experiment (MICRE), was to collect observations of surface radiation, cloud, precipitation, and aerosol properties. This report describes the instruments deployed and data sets collected, along with a summary of key data quality issues and information on some value-added products that are being developed to assist scientists in using the data.

54 ENVIRONMENTAL SCIENCES↗