SEARCH · Engineering Papers

Results for “turbulence methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Investigation of acoustic radiation from supersonic turbulent jets by double-pulse holographic interferometry

A new experimental method was used to optically investigate the acoustic field radiated from supersonic jets. The method utilizes a pulse ruby laser to obtain double exposure holograms of the sound field of a supersonic jet. The jet remains on during both exposures thus eliminating the no-flow exposure. The time separation between the pulses can be varied depending on the spectral component of the radiation to be observed. Optical records were obtained for supersonic jets with exit Mach number 1.0, 1.5 and 2.0. It was found that high frequency acoustic radiation mainly originates from the regions near the nozzle exit, whereas the low frequency noise is generated from regions further downstream. These findings are consistent with the acoustic data obtained by other investigators.

Ozkul, A.↗

NASA NTRS1989

Multidomain spectral solution of shock-turbulence interactions

The use of a fitted-shock multidomain spectral method for solving the time-dependent Euler equations of gasdynamics is described. The multidomain method allows short spatial scale features near the shock to be resolved throughout the calculation. Examples presented are of a shock-plane wave, shock-hot spot and shock-vortex street interaction.

Kopriva, David A.↗

NASA NTRS2001

Adaptive Numerical Dissipation Controls for High Order Methods

A numerical scheme for direct numerical simulation of shock-turbulence interactions of high speed compressible flows would ideally not be significantly more expensive than the standard fourth or sixth-order compact or non-compact central differencing scheme. It should be possible to resolve all scales down to scales of order of the Kolmogorov scales of turbulence accurately and efficiently, while at the same time being able to capture steep gradients occurring at much smaller scales efficiently. The goal of this lecture is to review the progress and new development of the low dissipative high order shock-capturing schemes proposed by Yee et al. Comparison on the efficiency and accuracy of this class of schemes with spectral and the fifth-order WENO (weighted essentially nonoscillatory) scheme will be presented. A new approach to dynamically sense the appropriate amount of numerical dissipation to be added at each grid point using non-orthogonal wavelets will be discussed.

Yee, Helen C.↗

NASA NTRS2016

An Application of CFD to Guide Forced Boundary-Layer Transition for Low-Speed Tests of a Hybrid Wing-Body Configuration

A hybrid transition trip-dot sizing and placement test technique was developed in support of recent experimental research on a hybrid wing-body configuration under study for the NASA Environmentally Responsible Aviation project. The approach combines traditional methods with Computational Fluid Dynamics. The application had three-dimensional boundary layers that were simulated with either fully turbulent or transitional flow models using established Reynolds-Averaged Navier-Stokes methods. Trip strip effectiveness was verified experimentally using infrared thermography during a low-speed wind tunnel test. Although the work was performed on one specific configuration, the process was based on fundamental flow physics and could be applicable to other configurations.

Luckring, James M.↗

NASA NTRS1977

Turbulent plane Couette flow using probability distribution functions

A numerical scheme employing a combination of the discrete ordinate method and finite differences is developed for solving the one-dimensional form of Lundgren's (1967) model equation for turbulent plane Couette flow. The approach used requires no a priori assumption about the form of the turbulent distribution function, and the numerical solution is obtained directly from the governing differential equations. Two different types of boundary conditions (zero-gradient and Chapman-Enskog) for the distribution function are evaluated by comparing the numerical results with experimental data. It is found that: (1) the present approach gives convergent and stable results over a wide range of Reynolds numbers; (2) Lundgren's equation yields results that compare well with experimental data for mean velocity and skin friction in the case of simple Couette flow; (3) the zero-gradient boundary condition leads to a logarithmic flow profile; and (4) the Chapman-Enskog boundary condition provides very good agreement with experimental data when applied within the near-wall region.

Srinivasan, R.↗

NASA NTRS1988

Reynold stress closure in jet flows using wave models

Research program efforts have continued to concentrate on the development of the numerical methods that will form the computational part of the turbulence closure scheme. Studies have continued on the wave model for the two dimensional shear layer. This configuration is being used as a test case for the closure schemes. Several numerical schemes for the solution of the non-separable Rayleigh equation were developed. This solution is required for the closure scheme in more complex geometries. The most efficient method found is a Hybrid scheme that combines both pseudospectral and finite difference techniques. In addition, conformal transformation techniques were developed to transform the arbitrary geometry of the jet to a simple computational domain. The study of the shock structure in arbitrary geometry jets and multiple jets. These developments are described briefly.

Morris, P. J.↗

NASA NTRS1979

Aerodynamic heating on complex configurations

A relatively simple method was developed previously (DeJarnette and Hamilton, 1973; 1975) to calculate laminar transitional and turbulent heating rates on blunt bodies at angles of attack, taking into account entropy-swelling effects. The method has now been extended to include complex configurations and the use of input surface pressure data when available. Applications of the extended method to the HL-10 Lifting Body, a blunted tangent ogive, a blunted tangent-ogive cylinder, and the Viking Aeroshell are discussed.

Dejarnette, F. R.↗

NASA NTRS1997

Numerical Simulations Using the Immersed Boundary Technique

The immersed-boundary method can be used to simulate flows around complex geometries within a Cartesian grid. This method has been used quite extensively in low Reynolds-number flows, and is now being applied to turbulent flows more frequently. The technique will be discussed, and three applications of the method will be presented, with increasing complexity. to illustrate the potential and limitations of the method, and some of the directions for future work.

Piomelli, Ugo↗

NASA NTRS1973

Statistical turbulence theory and turbulence phenomenology

The application of deductive turbulence theory for validity determination of turbulence phenomenology at the level of second-order, single-point moments is considered. Particular emphasis is placed on the phenomenological formula relating the dissipation to the turbulence energy and the Rotta-type formula for the return to isotropy. Methods which deal directly with most or all the scales of motion explicitly are reviewed briefly. The statistical theory of turbulence is presented as an expansion about randomness. Two concepts are involved: (1) a modeling of the turbulence as nearly multipoint Gaussian, and (2) a simultaneous introduction of a generalized eddy viscosity operator.

Herring, J. R.↗

NASA NTRS1992

The semi-discrete Galerkin finite element modelling of compressible viscous flow past an airfoil

A method is developed to solve the two-dimensional, steady, compressible, turbulent boundary-layer equations and is coupled to an existing Euler solver for attached transonic airfoil analysis problems. The boundary-layer formulation utilizes the semi-discrete Galerkin (SDG) method to model the spatial variable normal to the surface with linear finite elements and the time-like variable with finite differences. A Dorodnitsyn transformed system of equations is used to bound the infinite spatial domain thereby permitting the use of a uniform finite element grid which provides high resolution near the wall and automatically follows boundary-layer growth. The second-order accurate Crank-Nicholson scheme is applied along with a linearization method to take advantage of the parabolic nature of the boundary-layer equations and generate a non-iterative marching routine. The SDG code can be applied to any smoothly-connected airfoil shape without modification and can be coupled to any inviscid flow solver. In this analysis, a direct viscous-inviscid interaction is accomplished between the Euler and boundary-layer codes, through the application of a transpiration velocity boundary condition. Results are presented for compressible turbulent flow past NACA 0012 and RAE 2822 airfoils at various freestream Mach numbers, Reynolds numbers, and angles of attack. All results show good agreement with experiment, and the coupled code proved to be a computationally-efficient and accurate airfoil analysis tool.

Meade, Andrew J., Jr.↗

NASA NTRS1976

A method of distortion pattern synthesis for high response data screening

An empirically derived method of estimating maximum levels of instantaneous inlet total pressure distortion from steady state measurements is presented. The estimation procedure uses steady state total pressure and root mean square turbulent pressure data measurements to synthesize instantaneous distortion patterns. The synthesis method is tailored to intensify distortion patterns in a manner consistent with the characteristics of the particular index to be used in evaluating inlet/engine compatability. The maximum expected value of distortion, a statistically determined function of the length of time of inlet operation, is used to constrain the amount of pattern intensification. Comparison with an independent set of data is presented for verification of the synthesis method.

King, R. W.↗

NASA NTRS1998

Aeroheating Predictions for X-34 Using an Inviscid-Boundary Layer Method

Radiative equilibrium surface temperatures and surface heating rates from a combined inviscid-boundary layer method are presented for the X-34 Reusable Launch Vehicle for several points along the hypersonic descent portion of its trajectory. Inviscid, perfect-gas solutions are generated with the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA) and the Data-Parallel Lower-Upper Relaxation (DPLUR) code. Surface temperatures and heating rates are then computed using the Langley Approximate Three-Dimensional Convective Heating (LATCH) engineering code employing both laminar and turbulent flow models. The combined inviscid-boundary layer method provides accurate predictions of surface temperatures over most of the vehicle and requires much less computational effort than a Navier-Stokes code. This enables the generation of a more thorough aerothermal database which is necessary to design the thermal protection system and specify the vehicle's flight limits.

Riley, Christropher J.↗

NASA NTRS1998

Aeroheating Predictions for X-34 Using an Inviscid-Boundary Layer Method

Riley, Christopher J.↗

NASA NTRS1978

Turbulence models from the point of view of an industrial user

Since there appears to be little prospect of the development of methods for the solution of the full, time dependent Navier-Stokes equations in the near future, the need continues for turbulence models to approximate the Reynolds stress terms that appear in the time averaged Navier-Stokes equations. Even if methods were available for solving the full equations, this would not necessarily be the optimum choice in all cases. As the cost of numerical computations decreases, the trend toward the use of more complex methods is likely to continue, but there will always be a need for a range of methods, depending on the accuracy and detail required from the calculation.

Birch, S. F.↗

NASA NTRS1972

Inviscid surface streamlines and heat transfer on shuttle-type configurations.

A method is developed which calculates laminar, transitional, and turbulent heating rates on arbitrary blunt-nosed three-dimensional bodies at angle of attack in hypersonic flow. The geometry of the body may be specified analytically, or generated from a doubly cubic spline fit to coordinate points. Inviscid surface streamlines are calculated from Euler's equation using a prescribed pressure distribution. Laminar and turbulent heating rates are determined along a streamline by applying the axisymmetric analog to solutions of the axisymmetric boundary-layer equations. The location of the transition region may be specified optionally by geometric location, momentum thickness Reynolds number, or integrated unit Reynolds number along a streamline. Transitional heating rates are then calculated as a weighted average of the local laminar and turbulent values. Either ideal gas or equilibrium air properties may be used.

Dejarnette, F. R.↗

NASA NTRS1973

Report of conference evaluation committee

A general classification is made of a number of approaches used for the prediction of turbulent shear flows. The sensitivity of these prediction methods to parameter values and initial data are discussed in terms of variable density, pressure fluctuation, gradient diffusion, low Reynolds number, and influence of geometry.

Morkovin, M. V.↗

NASA NTRS1973

Modeling of turbulent transport in the surface layer

The turbulence equations as written by Donaldson using the method of invariant modeling have been applied to the following limiting cases of the surface or constant flux layer of the planetary boundary layer: (1) Neutrally stable; (2) stable (above influence of surface roughness); (3) nearly neutrally stable; and (4) very unstable (free convection). For the neutrally stable case, the equations are shown to admit as a solution the familiar logarithmic profile. By use of this result, boundary conditions suitable for the surface layer are defined and are simple to apply to rough surfaces.

Smith, G. L.↗

NASA NTRS1975

Crossflow in two-dimensional asymmetric nozzles

An experimental investigation of the crossflow effects in three contoured, two-dimensional asymmetric nozzles is described. The data were compared with theoretical predictions of nozzle flow by using an inviscid method of characteristics solution and two-dimensional turbulent boundary-layer calculations. The effect of crossflow as a function of the nozzle maximum expansion angle was studied by use of oil-flow techniques, static wall-pressure measurements, and impact-pressure surveys at the nozzle exit. Reynolds number effects on crossflow were investigated.

Sebacher, D. I.↗