Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “suspensions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

California coastal processes study: Skylab

The author has identified the following significant results. In San Pablo Bay, the patterns of dredged sediment discharges were plotted over a three month period. It was found that lithogenous particles, kept in suspension by the fresh water from the Sacramento-San Joaquin, were transported downstream to the estuarine area at varying rates depending on the river discharge level. Skylab collected California coastal imagery at limited times and not at constant intervals. Resolution, however, helped compensate for lack of coverage. Increased spatial and spectral resolution provided details not possible utilizing Landsat imagery. The S-192 data was reformatted; band by band image density stretching was utilized to enhance sediment discharge patterns entrainment, boundaries, and eddys. The 26 January 1974 Skylab 4 imagery of San Francisco Bay was taken during an exceptionally high fresh water and suspended sediment discharge period. A three pronged surface sediment pattern was visible where the Sacramento-San Joaquin Rivers entered San Pablo Bay through Carquinez Strait.

Pirie, D. M.↗
NASA NTRS1974

Feasibility study of a digital rebalance loop for a dry tuned TDF gyro

A two degrees-of-freedom (TDF) rate integrating gyro in the strapdown mode is a candidate for attitude sensing in a spacecraft navigation system, since it provides an additional axis of information for a relatively small increase in hardware complexity. A type of gyro which has not been fully exploited is of the dry, tuned, TDF design, in which the spring constant of the suspension system is effectively cancelled by the dynamic antispring of a swiveling, rotating, gimbal. The use of this unconventional gyro in a digital rebalance loop was investigated.

Coffman, D. E.↗
NASA NTRS1975

Computer analysis of railcar vibrations

Computer models and techniques for calculating railcar vibrations are discussed along with criteria for vehicle ride optimization. The effect on vibration of car body structural dynamics, suspension system parameters, vehicle geometry, and wheel and rail excitation are presented. Ride quality vibration data collected on the state-of-the-art car and standard light rail vehicle is compared to computer predictions. The results show that computer analysis of the vehicle can be performed for relatively low cost in short periods of time. The analysis permits optimization of the design as it progresses and minimizes the possibility of excessive vibration on production vehicles.

Vlaminck, R. R.↗
NASA NTRS1975

Ecology and Thermal Inactivation of Microbes in and on Interplanetary Space Vehicle Components

Spores of Bacillus subtilis var. niger were heat treated in aqueous suspension at 90 C, and observed for morphological changes and loss of viability. The 5 logs reduction that occurred in broth at 90 min required 210 min in buffered water. Five characteristic changes observed after spores were exposed 120 min at 90 C in buffered water were: (1) 90% loss of spore viability, (2) 5% stainability, (3) 76% increase in spore size (as observed by scanning electron microscopy), (4) 21% of spore areas remaining refractile, and (5) an increase of 77% in packed cell volume (PCV). Stainability and PCV changes were recognized only after secondary exposure in broth. Extended heat exposure (3 h at 90 C) resulted in 99% loss of spore viability and 99% loss of stainability. After 4 hours of heat exposure, 90% of the cells disintegrated. These results suggest that early germinal changes occurr concurrently with the early changes in the heat susceptibility of dormant spores.

Reyes, A. L.↗
NASA NTRS1976

An Evaluation of Reaction Wheel Emitted Vibrations for Large Space Telescope

Emitted force and torque vibration were measured in three axes for three Sperry reaction wheels. Data were taken for both hard and soft mounts; tests were conducted at constant speeds and during runup-rundown over a 0 to 5000 rpm range. A FSC, 7 ft-lb-sec and HEAO, 30 ft-lb-sec ball bearing reaction wheel and a model magnetic bearing were tested. Data analysis was conducted to identify the principal resonances in the 10 to 120 Hz region. Although some particular phenomena remain unexplained, in general good agreement is attained between the analytical predictions and test data. Predictions were also made of the expected emitted vibrations for an LST sized ball bearing and magnetic bearing reaction wheel using engineering judgment and the test data obtained. Additional tests were also run on the 101H duplex bearing pairs used in the reaction wheel suspension to determine bearing stiffness characteristics in the pre-breakaway zero speed region.

Source record↗
NASA NTRS1976

Linear and nonlinear analysis of orbital telescope/space shuttle dynamics and control

Work completed on the design and study of an annular suspension and pointing (ASP) system for the space shuttle was presented. This system makes use of a magnetically suspended vernier pointing assembly. The following objectives were pursued in this study: (1) development of a detailed mathematical model of the Space Shuttle/ASP system, (2) design of control laws in order to obtain the desired pointing performance, and (3) prediction of the statistical pointing accuracies in the presence of stochastic disturbances such as crew-motion, and sensor and actuator noise. The first two of these objectives are documented in this report.

Roberts, A. S., Jr.↗
NASA NTRS1976

Mechanical capacitor

A new energy storage system (the mechanical capacitor), using a spokeless magnetically levitated composite ring rotor, is described and design formulas for sizing the components are presented. This new system is configured around a permanent magnet (flux biased) suspension which has active servo control in the radial direction and passive control in the axial direction. The storage ring is used as a moving rotor and electronic commutation of the stationary armature coils is proposed. There is no mechanical contact with the rotating spokeless ring; therefore, long life and near zero rundown losses are projected. A 7-kW h system is sized to demonstrate feasibility. A literature review of flywheel energy storage systems is also presented and general formulas are developed for comparing rotor geometries.

Kirk, J. A.↗
NASA NTRS1975

California nearshore surface currents

During the oceanic period from July to November, the southward flowing California current dominates the nearshore current patterns. Commencing about the middle of November and extending to mid-February, the Davidson current, a northward moving countercurrent, is the dominant inshore transporter of water and suspensates. The phenomenon of upwelling is prevalent during the period from the middle of February to the end of July. Thus, every year along the coast of California, there are three successive current seasons: the oceanic, the Davidson, and the upwelling. This paper is a discussion of the nature of these nearshore currents. In addition, the capabilities of various remote sensing platforms and systems for providing methods of monitoring the coastal processes associated with the current seasons of California are demonstrated herein.

Pirie, D. M.↗
NASA NTRS1976

Radiative behavior of a gas layer seeded with soot

Gaseous film or transpiration cooling may be used to reduce the heat flux reaching the wall of a container or other structures. Such a protective film, however, is usually not effective for reducing radiative heat transfer as most gases are transparent in the temperature range for which solid walls can exist. Therefore, heat transfer was examined for a gaseous layer seeded with radiation-absorbing carbon particles (soot) and flowing along a surface. The layer was subjected to an external high temperature source of blackbody radiation. The radiative behavior was found to depend on a parameter containing particle concentration, layer thickness and source temperature. Only a very small particle volume concentration, in the range of .0001, was required to obtain high absorption in a 1-cm-thick layer for typical conditions. The results provide the distance along the surface for which the heat transfer to the wall remains within an acceptable limit and the particles remain below a temperature at which they will melt or vaporize. The wall protection by the layer lasts only until the particles vaporize or the layer becomes so hot that it reradiates substantially to the wall. Depending on the layer mass velocity the protection may be effective for a distance along the wall of only a few layer thickness. Hence, to protect greater wall lengths, it will be necessary to introduce the suspension through multiple slots or holes along the wall.

Siegel, R.↗
NASA NTRS1975

Fluid transport on earth and aeolian transport on Mars

Experimental data on cohesion-free particle transport in fluid beds are applied, via a universal scaling relation, to atmospheric transport of fine grains on Mars. It may be that cohesion due to impact vitrification, vacuum sintering, and adsorbed thin films of water are absent on Mars - in which case the curve of threshold velocity versus grain size may show no turnup to small particle size, and one micron diameter grains may be injected directly by saltation into the Martian atmosphere more readily than 100 micron diameter grains. Curves for threshold and terminal velocities are presented for the full range of Martian pressures and temperatures. Suspension of fine grains is significantly easier at low temperatures and high pressures; late afternoon brightenings of many areas of Mars, and the generation of dust storms in such deep basins as Hellas, may be due to this effect.

Sagan, C.↗
NASA NTRS1975

Drag coefficient of 20-degree conical ribbon parachute

An empirical formula for the steady-state drag coefficient of a 20-degree conical ribbon parachute is developed. The derived expression takes into account the effect of suspension line length and geometric porosity within the limits of practical design. Also included are factors which provide drag reduction due to skirt reefing and the wake behind a primary body. The calculated values are in agreement with the available experimental results.

Utreja, L. R.↗
NASA NTRS1975

Track-train dynamics

The purpose of this paper is to outline one of the serious dynamic problems involving railroad cars and to propose an orderly approach to the definition of a dynamic model through analysis and testing that can be used to investigate various fixes. The problem in question is the hunting phenomenon involving lateral instability of the car suspension (trucks). This phenomenon has been recognized as a major contributing factor in a significant number of derailments causing millions of dollars in losses. This paper expounds on the mechanics and characteristics of hunting. The planned solution is outlined as a building block approach directed at formulating a test verified dynamic model of an open hopper freight car-truck assembly. Results obtained to date are presented together with conclusions related to the program.

Abbott, P. W.↗
NASA NTRS1976

Streaming potential measurements of biosurfaces

A technique based on the measurement of streaming potentials has been developed to evaluate the electrokinetic region of the cell periphery. This approach is feasible for cell lines propagated in in-vitro cell cultures in monolayer form. The advantage of this system is that cells may be evaluated in the living state atttached to a substrate; it is not necessary to subject the cells to enzymatic, chemical, or mechanical trauma required to obtain monodisperse suspensions which are then normally evaluated by microelectrophoresis. In this manner, it should be possible to study the influence of substrate and environmental factors on the charge density and potential at the cell periphery. The apparatus and procedure are described as well as some results concerning the electrokinetic potential of borosilicate capillaries as a function of ionic strength, pH, and temperature. The effect that turbulence and entrance flow conditions have on accurate streaming-potential measurements is discussed. The electrokinetic potential of BALB/c 3T12 fibroblasts has been quantified as a function of pH, ionic strength, glutaraldehyde fixation, and Giemsa staining.

Van Wagenen, R. A.↗
NASA NTRS1978

Technology of welding aluminum alloys-IV

Skate-weld carriage and track assembly were developed for controlled fusion welding on compound-curvature surfaces. Unlike fixed-position carriage used for vertical, horizontal, and circumferential welding, carriage has suspension system that permits angular positioning of weld head on carriage. It also has carriage-and-drive track mechanism capable of traveling over compound curvatures. Carriage is designed with universal mounting platform so that slim tools, weld heads, or X-ray units can be interchanged without need for realinement.

Ginez, R.↗
NASA NTRS1975

Prediction of the drag coefficient of a 20-degree conical ribbon parachute

An empirical formula for the steady state drag coefficient of a 20 degree conical ribbon parachute is developed. The derived expression takes into account the effect of suspension line length and geometric porosity within the limits of practical design. Also included are factors which provide drag reduction due to skirt reefing and the wake behind a primary body. The calculated values are in agreement with the available experimental results.

Utreja, L. R.↗
NASA NTRS1976

Design features and operational characteristics of the Langley 0.3-meter transonic cryogenic tunnel

Experience with the Langley 0.3 meter transonic cryogenic tunnel, which is fan driven, indicated that such a tunnel presents no unusual design difficulties and is simple to operate. Purging, cooldown, and warmup times were acceptable and were predicted with good accuracy. Cooling with liquid nitrogen was practical over a wide range of operating conditions at power levels required for transonic testing, and good temperature distributions were obtained by using a simple liquid nitrogen injection system. To take full advantage of the unique Reynolds number capabilities of the 0.3 meter transonic tunnel, it was designed to accommodate test sections other than the original, octagonal, three dimensional test section. A 20- by 60-cm two dimensional test section was recently installed and is being calibrated. A two dimensional test section with self-streamlining walls and a test section incorporating a magnetic suspension and balance system are being considered.

Kilgore, R. A.↗
NASA NTRS1976

Manufacturing unique glasses in space

An air suspension melting technique is described for making glasses from substances which to date have been observed only in the crystalline condition. A laminar flow vertical wind tunnel was constructed for suspending oxide melts that were melted using the energy from a carbon dioxide laser beam. By this method it is possible to melt many high-melting-point materials without interaction between the melt and crucible material. In addition, space melting permits cooling to suppress crystal growth. If a sufficient amount of under cooling is accompanied by a sufficient increase in viscosity, crystallization will be avoided entirely and glass will result.

Happe, R. P.↗
NASA NTRS1975

Floated pallet definition study. Volume 4: Summary volume

The conceptual design of a suspension system for the Floated Pallet and a retention system to support the pallet during launch, maneuvering and descent are described. In addition, a control moment gyroscope support equipment configuration study including installation and an experiment mount and erection study was performed. The impact of these separate hardware studies on the existing pallet configuration was assessed and a modified pallet common module defined.

Source record↗