Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “supply chains”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Feasibility of Ocean-Based Renewable Energy in the Gulf of Mexico

This paper summarizes a comprehensive feasibility assessment of six offshore renewable energy sources in the Gulf of Mexico (GOM) to potentially provide utility-scale electricity from the Outer Continental Shelf (federal waters) and state waters to land-based grids. Overall, the primary objective is to inform future energy planning. The authors evaluated offshore wind, wave energy, tidal energy, ocean-based solar photovoltaics (PV), ocean current, and ocean thermal energy conversion. Of these energy resources, offshore wind was the most viable option and was the focus of the second part of the study. The technical challenges of developing offshore wind in the GOM are discussed including hurricane design for turbines and substructures, as well as turbine solutions to overcome lower wind regimes. In addition, advantages to offshore wind development in the GOM are described including proximity to oil and gas supply chains. Economic analysis using established cost models at the National Renewable Energy Laboratory identified hypothetical project locations where net value of offshore wind was the highest, and the levelized cost of energy (LCOE) was calculated for three sites: Port Isabel, Port Arthur, and Pensacola. Offshore wind LCOE in the GOM was found to be higher than those in sites along the north and mid-Atlantic coasts, but decreasing cost trajectories indicate the possibility of economic viability for locations in Texas and west Louisiana after 2030. The extrapolated 2030 LCOE values range from 73 dollars per MWh (Site 1, Port Isabel) and 79 dollars per MWh (Site 3, Port Arthur) to 91 dollars per MWh (Site 5, Pensacola).

16 TIDAL AND WAVE POWER↗
DOE OSTI2023

Assessing the technical aspects of ocean-alkalinity-enhancement approaches

Ocean alkalinity enhancement (OAE) is an emerging strategy that aims to mitigate climate change by increasing the alkalinity of seawater. This approach involves increasing the alkalinity of the ocean to enhance its capacity to absorb and store carbon dioxide (CO 2 ) from the atmosphere. This chapter presents an overview of the technical aspects associated with the full range of OAE methods being pursued and discusses implications for undertaking research on these approaches. Various methods have been developed to implement OAE, including the direct injection of alkaline liquid into the surface ocean; dispersal of alkaline particles from ships, platforms, or pipes; the addition of minerals to coastal environments; and the electrochemical removal of acid from seawater. Each method has its advantages and challenges, such as scalability, cost effectiveness, and potential environmental impacts. The choice of technique may depend on factors such as regional oceanographic conditions, alkalinity source availability, and engineering feasibility. This chapter considers electrochemical methods, the accelerated weathering of limestone, ocean liming, the creation of hydrated carbonates, and the addition of minerals to coastal environments. In each case, the technical aspects of the technologies are considered, and implications for best-practice research are drawn. The environmental and social impacts of OAE will likely depend on the specific technology and the local context in which it is deployed. Therefore, it is essential that the technical feasibility of OAE is undertaken in parallel with, and informed by, wider impact assessments. While OAE shows promise as a potential climate change mitigation strategy, it is essential to acknowledge its limitations and uncertainties. Further research and development are needed to understand the long-term effects, optimize techniques, and address potential unintended consequences. OAE should be viewed as complementary to extensive emission reductions, and its feasibility may be improved if it is operated using energy and supply chains with minimal CO 2 emissions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Assignment of Freight Traffic in a Large-scale Intermodal Network under Uncertainty

This paper presents a methodology for freight traffic assignment in a large-scale road-rail intermodal network under uncertainty. Network uncertainties caused by natural disasters have dramatically increased in recent years. Several of these disasters (e.g., Hurricane Sandy, Mississippi River Flooding, and Hurricane Harvey) severely disrupted the U.S. freight transportation network, and consequently, the supply chain. To account for these network uncertainties, a stochastic freight traffic assignment model is formulated. An algorithmic framework, involving the sample average approximation and gradient projection algorithm, is proposed to solve this challenging problem. The developed methodology is tested on the U.S. intermodal network with freight flow data from the Freight Analysis Framework. The experiments consider three types of natural disasters that have different risks and impacts on transportation networks: earthquakes, hurricanes, and floods. It is found that for all disaster scenarios, freight ton-miles are higher compared to the base case without uncertainty. The increase in freight ton-miles is the highest under the flooding scenario; this is because there are more states in the flood-risk areas, and they are scattered throughout the U.S.

42 ENGINEERING↗
DOE OSTI2026

Environmental Trade-Offs for a Process Utilizing Aerobic Respiration for Biological Conversion of Cellulosic Biomass-Derived Sugars to Hydrocarbons (Renewable Diesel Blendstock): Cooperative Research and Development Final Report, CRADA Number CRD-18-00765, Project 1

Phase II work is meant to develop an advanced understanding of how production of a renewable diesel blendstock from lignocellulosic biomass feedstocks via aerobic respiration at different production scales affects emissions of criteria pollutants and greenhouse gases (GHGs), local and regional air quality. The results could inform decisions by stakeholders (e.g., industry, community, air quality planners, investors) regarding relationships and tradeoffs between multiple environmental impacts and the challenges and opportunities for the design and deployment of a sustainable biofuel supply chain.

09 BIOMASS FUELS↗
DOE OSTI2020

Exploring the Next Generation of Low-Carbon Technologies for Deployment on Contaminated Lands

Low-carbon energy technologies and industries can reduce or avoid pollution, create economic development benefits (e.g. job creation), enhance local tax revenues, and support supply chain businesses. Many communities have vacant or underutilized and contaminated land that presents an opportunity cost for the economy and a blight on neighborhoods. This paper identifies a research agenda and funding proposal to support the next generation of low carbon technologies to deploy on contaminated lands.

brownfield sites↗
DOE OSTI2020

International Symposium on Transport Security of Nuclear and other Radioactive Material; Tokyo, Japan, November 2019

As an outcome of the Fourth Nuclear Security Summit of 2016, held in Washington D.C., the Governments of Australia, Canada, Czech Republic, Finland, France, Hungary, Italy, Japan, Kazakhstan, Morocco, Spain, the Republic of Korea, Thailand, the United Kingdom, and the United States reaffirmed, through INFCIRC/909, their will to further improve the overall security in the transport of nuclear and other radioactive materials. With this goal in mind, each expressed their commitment to further exchange national practices with other countries through the IAEA and the Global Initiative to Combat Nuclear Terrorism (GICNT). They also committed to actively support the IAEA as the central organization for coordinating activities and developing guidance documents and to support the GICNT and the Global Partnership Against the Spread of Weapons and Materials of Mass Destruction in developing and implementing its nuclear transport security activities. Both of these organizations address the commitments regarding nuclear transport security as outcomes of the Nuclear Security Summit 2016. In an effort to continue the momentum from the Nuclear Security Summit, the Government of Japan, in cooperation with the Integrated Support Center for Nuclear Nonproliferation and Nuclear Security of Japan Atomic Energy Agency (ISCN/JAEA), hosted the International Transport Security Symposium in November 2019. With over fifty countries invited to attend, the event exchanged and promoted good practices in several topical area sessions related to the security of nuclear and other radioactive material in transport. Topical sessions included Laws and Regulatory Framework, Physical Protection Systems, Response Actions, and Insider/Information Security. The Symposium built support for transport security and encouraged IAEA Member States to actively work regionally and internationally with the IAEA’s transport security programme through the practical implementation and incorporation of IAEA Nuclear Security Series recommendations and guidance into their national frameworks for transport security. From these sessions, to the host detailed a recommended path forward for future engagements in the security of nuclear and radioactive material in transport. The paper will discuss the Symposium’s outcomes and highlight the forward momentum made by both signatories and non-signatories for the strengthening of all the critical elements of a State’s transport security regime, including physical protection systems, insider threats to the nuclear and radioactive material supply chains, planning and capabilities for law enforcement response to malicious transport security events, and employment of technology to address critical vulnerabilities to the transport of nuclear and other radioactive materials.

Holt, Katherine↗
DOE OSTI2020

Anatomical Fraction segmentation in the biomass bales

The U.S. Department of Energy Bioenergy Technologies Office (BETO) is committed to the development of sustainable, nationwide, commercial biofuel production to displace petroleum-derived fuels, increase domestic energy production, and encourage the creation of a domestic bioenergy and bioproducts industry. Operating a commercial-scale bioenergy operation requires significant technological advancements for determining biomass feedstock quality during the preprocessing stage. Usage of non-food feedstocks- e.g., corn-stover, pine residue, and forest residue - at the biorefineries reduces strain on the food supply chain. But the non-food feedstock heterogeneity- physical size, shape, and chemical composition-poses a significant challenge during milling, conveyance, feeding, and biofuel conversion processes. 3D X-Ray imaging (CT) is capable of distinguishing material features by detecting density and compositional differences. But the inherent complexity introduced during harvesting and bailing makes the reconstruction and interpretation of baled biomass materials from x-ray data time consuming, laborious, and expensive. Feedstocks are low-density materials that produce small contrast differences in the x-ray images. This paper focuses on using the shape and texture properties, using 3D image processing techniques like 3D skeletonization, directional statistics to characterize and extract volumetric content of the different tissue samples in the biomass bales.

09 BIOMASS FUELS↗
DOE OSTI2021

Data, Modeling, & Analysis

The project goal includes developing model pathways to improve sustainability of feedstock supply chains to reduce access costs and the environmental footprint. The project aims to harness synergies of production and collection practices and current systems to improve economic and environmental outcomes.

09 BIOMASS FUELS↗
DOE OSTI2021

BETO 2021 Peer Review - Strategic Analysis Support WBS 4.1.1.30

Strategic Analysis Support. The objective of the NREL strategic support project is to provide sound, unbiased, and consistent analyses to inform the strategic direction of the DOE BETO office. This project addresses key technological questions, provides critical data needed to inform strategy, and highlights barriers, gaps and data needs in support of the DOE BETO's mission to improve the affordability of bio-based fuels and products. This task employs various quantitative (techno-economic analysis, TEA) and qualitative (gap analysis) approaches to allow for direct comparisons of biomass conversion technologies across a wide slate of processing platforms and products. Furthermore, this project develops and utilizes novel analyses beyond traditional biorefinery focused TEA/LCAs to identify both technical (e.g., in sustainable design) and non-technical (e.g., in value proposition) barriers, as well as to outline mitigation strategies and R&D needs for emerging technologies. Additionally, the project is tasked with evaluating drivers that support the growing bio-economy, which is achieved by the development and public release of tools to advance the understanding and facilitate comparisons of socio-economic impacts along the supply chain. Critical to the success of this project is the development of defensible methodologies, analyses, and tools that are publicly available to support stakeholders and bioeconomy growth. To develop such high-quality analyses, the biggest challenge to this project, as with most analysis focused projects, is the availability and reliability of the underlying data. Therefore, the project team works extensively with key stakeholders (e.g., policy makers, bioenergy technology developers, and investors) in developing and reviewing the results of these analyses to overcome this challenge. Any remaining uncertainties associated with the analysis efforts are clearly defined and quantified.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Cadmium Telluride Photovoltaics Accelerator Consortium Solicitation: Request for Proposals Information

Cadmium telluride photovoltaics (CdTe PV) is a leading PV technology built on U.S. innovations that currently holds significant market share within domestic utility scale PV systems. In order to keep pace with a highly competitive and innovative global PV module market, CdTe manufacturing needs readily adaptable advances at the cell and module levels that simultaneously enable higher conversion efficiencies and manufacturing cost reductions without risking long-term module durability. In pursuit of this goal, the Department of Energy (DOE) Solar Energy Technologies Office (SETO) has asked the National Renewable Energy Laboratory (NREL) to launch and support a Consortium to accelerate domestic CdTe technology development through a competitive solicitation process. NREL will competitively select a CdTe Consortium with the goals of enhancing U.S. competitiveness and expanding domestic CdTe PV material and module production through 2030. NREL will provide coordination and oversight through development of technical scopes, review of technical proposals, subcontract support, and review of deliverables along with research support to the Consortium. The new Consortium is expected to include major U.S. companies and universities that possess strong technology development, transfer, and validation capabilities. The research and analysis output of the CdTe Consortium will inform purchasing, design, deployment, and operations decisions of companies in the domestic CdTe PV supply chain, leading to increased material and module production in the U.S.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2021

Advanced Fuels Campaign Execution Plan

The Advanced Fuels Campaign (AFC) Execution Plan outlines the strategy, mission, scope, near-term and long-term goals, structure, and organization associated with nuclear fuels and materials research, development, and demonstration activities within the Department of Energy’s (DOE) Nuclear Fuel Cycle and Supply Chain (NFCSC) program. NFCSC has been given responsibility to identify and mature advanced fuel technologies for the DOE using a science-based approach, focused on developing a fundamental understanding of nuclear fuels and materials to drive development of integrated nuclear fuel and materials technology. This science-based approach combines theory, experiments, and multiscale modeling and simulation to achieve a predictive understanding of relevant behaviors ranging from fuel fabrication processes (and their resulting fuel microstructures) through fuel/cladding performance under irradiation (in contrast to more empirical, observation-based approaches frequently used in fuel performance modeling and fuel qualification). The traditional scope of AFC includes the evaluation and development of multiple fuel forms to support two fuel cycle options: once-through and full recycle. The word “fuel” is used generically to include conventional fuels, transmutation targets, and any associated cladding or duct materials. The once-through fuel cycle addresses advanced light water reactor fuels with enhanced performance, extended burnup, and reduced waste generation. In fiscal year (FY) 2012, AFC’s scope expanded to include research, development, and demonstration (RD&D) for light water reactor (LWR) fuels with enhanced accident tolerance. Fuel fabrication activities include the development of innovative methods to enhance process efficiencies, reduce waste, and improve control over as-fabricated fuel microstructural properties to achieve desired in-reactor performance. Using modern modeling and simulation approaches, the objective is to predict fresh fuel properties given the feedstock characteristics and fabrication process parameters. The performance-related activities include small-scale, in-reactor, and out-of-reactor phenomenological testing (distinct from, but synergistic with, integral prototypic testing) and extensive, quantitative characterization (focusing on characterization of fuel and cladding materials at the scale of microstructure) both before and after testing. Larger-scale, prototypic experiments are conducted in concert with phenomenological testing to drive a Fuel Development and Qualification program, incorporating a fundamental understanding of fuel behavior performance characteristics. Then, using the tools developed under the productive science-based approach, fuels will be optimized to meet specific performance requirements, thereby minimizing the need to repeatedly perform large-scale, integral experiments over a wide parametric range as a means of experimental exploration. Two significant initiatives are underway within AFC. First, a gap analysis completed in early FY 2019 identified critical irradiation testing needs that are lacking within the national light water reactor (LWR) fuels testbed since the shutdown of the Halden Reactor in 2018. The identified gaps are for instrumented, prototypic testing of LWR fuels, especially under boiling water reactor conditions, ramp conditions, and conditions leading to fuel failure; these needs exist for supporting current LWR fuels and their possible extension to higher burnups, but are especially urgent relative to near-term development and qualification of accident-tolerant fuels. Recommendations that resulted from the Halden Gap Analysis focused on enhancements at Advanced Test Reactor (ATR) and Transient Reactor Test Facility (TREAT) to fill gaps in testing capabilities relative to these needs. Second, a concerted effort to develop and demonstrate a systematic approach to accelerating the development, testing, and qualification of new fuel systems has been initiated. This is highlighted by a test strategy that combines the considerable advances in multiscale, mechanistic fuel modeling of recent years with a MiniFuel separate effects test program in the High Flux Isotope Reactor (HFIR) and a Fission Accelerated Steady-state Testing (FAST) semi-integral accelerated test program in ATR. This approach is being tested/demonstrated using the metallic fuel system, but if successful it is expected to be extensible to multiple fuel types and diverse applications. This document includes an overview of the NFCSC program, a definition of science-based development of nuclear fuels, near-term goals for Advanced LWR fuels (ALFs), and longer-term goals for Advanced Reactor Fuels (ARFs) RD&D. This includes the activities that will be conducted to achieve success toward the grand challenge, as well as the goals and milestones to be achieved over the next few decades of research and development. Long-term goals are based on the DOE Office of Nuclear Energ

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

A hub and spoke approach to optimizing energy wheeling of renewable resources

The deployment of zero carbon renewable energy sources needs to increase significantly to support the goal of net zero greenhouse gas emissions by 2050. At the same time energy end use needs to decarbonize. This will change both energy supply and energy demand patterns, requiring the energy delivery infrastructure (grid-based transmission circuits) to become increasingly flexible to maintain security of supply everywhere and always. The integration of zero carbon renewable energy requires cross-border and cross energy system coupling and a fit-for-purpose design. Nowadays, energy systems are planned, designed and operated in silos with a strong national focus. However, large-scale offshore wind production needs to be transported to deep inland locations, across country borders. The increased peak generation capacity of renewable energy sources will, at times, significantly exceed demand (Matthew Langholtz, 2020). The traditional solution of continuously reinforcing and extending the electricity grid is not sustainable from a cost and societal perspective. This paper will, however, propose a deterministic approach on how networked (interconnected grid) Points of receipt (POR) to Points of Delivery (POD) can be optimized for wheeling renewable energy resources while minimizing energy cost with a hub and spoke approach. The statistical approach will be done via using existing daily energy market clearing prices, available transmission capacity and firm daily transmission prices in open access energy markets. Renewable energy targets, including specific offshore wind targets, need to be in line with the ramp-up as implied by the Paris Agreement. These targets are required to provide industry with a secure market outlook that allows them to build up supply chains accordingly. Optimizing wheeled energy paths from carbon neutral resources such as renewables make them not only cost competitive on the unit commitment stack, but also more accessible on the dispatch stack to other carbon heavy forms of generation such as coal and natural gas turbines (Matthew Langholtz, 2020). This correlates to maximizing renewable resource inertia (wind, solar, biomass) within an interconnected grid without having to consider additional expansion of resources via land purchases and de-forestation.

Mukherjee, Srijib↗
DOE OSTI2021

Bioeconomy Scenario Analysis

The Bioeconomy Scenario Analysis project has shed light on system interactions within the biomass-to-biofuel supply chain for the past 15 years. This presentation highlights recent analyses on investment and policy scenarios for sustainable aviation fuel, the economic and policy considerations for the historical buildout of the starch ethanol industry, and the potential impact of U.S. Department of Energy investment in bioenergy R&D.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Exploring PV Circularity by Modeling Socio-Technical Dynamics of Modules' End-of-Life Management: Preprint

The circular economy (CE) tackles environmental and resource scarcity issues by maximizing value retention in the economy. The concept implies design strategies such as reducing the use of materials or improving products’ durability and end-of-life (EOL) strategies such as reusing products and components and recycling materials. With an estimated 80 million tons of global cumulative EOL photovoltaic (PV) modules, applying CE principles to the PV industry could alleviate resource scarcity issues while also providing economic benefits. However, transitioning to a CE may imply changes in organizations and consumer behaviors. In this context, assessment of CE strategies may require accounting for behavioral change, a requirement that methods from complex system science such as agent-based modeling meet. Thus, this paper uses an agent-based modeling (ABM) approach to study circularity in the photovoltaics supply chain. Four types of agents are represented in the ABM: PV owners, installers, recyclers, and manufacturers. Moreover, five possible EOL options – including three CE strategies – are modeled. Departing from traditional techno-economic analysis, the model includes techno-economic factors as well as social factors to model EOL management decisions. Results show that each dollar decrease in the recycling fees improves the recycling rate by roughly 1.1%. However, excluding social factors underestimates the effect that lower recycling prices have on material circularity.

28 EE - Advanced Manufacturing Office (EE-5A)↗
DOE OSTI2021

High Temperature Alloys Session 1

Section III Division 5 overview Code materials VHTR materials 617 and 800H Qualification of additional materials Corrosion effects Operating plant experience Additive/advanced manufacturing Control rod sleeves Pressure Vessel Steels Allowed materials Elevated temperature limits and properties Supply chain Welding Radiation damage

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Cylinder Occupancy and Measurement Suite

This software automatically records data from the Unattended Cylinder Verification Station, determines the state of the instrument, captures images of uranium hexafluoride shipment cylinders, and determines their weight. The code has been developed primarily for the International Atomic Energy Agency, but this type of instrument could be of interest to any facility operator in the uranium supply chain that handles uranium hexafluoride shipment cylinders (e.g. the 30B and 48Y cylinder). Operators may be interested in having this instrument confirm shipper declared measurement values upon receipt of a cylinder. They may also use it to aid in process monitoring if the quantity of material in the cylinder changes due to a processing activity.

Stewart, Scott L↗
DOE OSTI2022

Self Configuring Digital Twin for Optimizing E-Waste Recycling

Electronic waste recycling industry needs a decision support tool for optimizing their processes to become cost competitive. We developed a software called CMAT, Comprehensive Manufacturing Assessment Tool. The aim of CMAT is to provide the e-waste recycling companies with a fully customizable decision support framework that analyzes the optimal supply chain configurations. The software optimizes the logistics operations, helps to identify the best recycling process configuration, and generates valuable insights regarding the economic performance of different categories of e-waste. The ultimate purpose of the tool is to assist the users developing a digital twin of their processes and to provide insights on questions pertinent to the e-waste recycling industry including how to increase efficiency and reduce costs, energy consumption, and greenhouse gas emissions.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Utilizing Coal as a Source for REE/CMs

The Department of Energy’s program to produce Rare Earth Elements (REE) and Critical Minerals (CM) from coal and related materials was created to alleviate concerns over U.S. dependence on foreign supplies and to provide domestic industry a secure supply of the materials they need to participate in evolving markets. The lack of a mature domestic REE supply chains, however, present a major obstacle to achieving this goal. Engineers in the National Energy Technology Laboratory (NETL)’s Research and Innovation Center (RIC) have conducted numerous market and techno-economic analyses on domestic REE needs and pathways, as well as extensive interviews with industry leaders, all with the goal of investigating the opportunities for coal-derived REE and CM products. This talk will highlight some of the major challenges and key takeaways from this work (Presented at the ACS 26th Annual Green Chemistry & Engineering Conference).

Summers, William↗