SEARCH · Engineering Papers

Results for “structured”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Centaur Standard Shroud (CSS) static ultimate load structural tests

A series of tests were conducted on the jettisonable metallic shroud used on the Titan/Centaur launch vehicle to verify its structural capabilities and to evaluate its structural interaction with the Centaur stage. A flight configured shroud and the interfacing Titan/Centaur structural assemblies were subjected to tests consisting of combinations of applied axial and shear loads to design ultimate values, including a set of tests on thermal conditions and two dynamic response tests to verify the analytical stiffness model. The strength capabilities were demonstrated at ultimate (125 percent of design limit) loads. It was also verified that the spring rate of the flight configured shroud-to-Centaur forward structural deflections of the specimen became nonlinear, as expected, above limit load values. This test series qualification program verified that the Titan/Centaur shroud and the Centaur and Titan interface components are qualified structurally at design ultimate loads.

Source record↗

NASA NTRS1975

LTA structures and materials technology

The state-of-the-art concerning structures and materials technology is reviewed. It is shown that many present materials developments resulting from balloon and aircraft research programs can be applied to new concepts in LTA vehicles. Both buoyant and semi-buoyant vehicles utilize similar approaches to solving structural problems and could involve pressurized non-rigid and unpressurized rigid structures. System designs common to both and vital to structural integrity include much of the past technology as well. Further research is needed in determination of structural loads, especially in future design concepts.

Mayer, N. J.↗

NASA NTRS1975

Arrow-wing supersonic cruise aircraft structural design concepts evaluation. Volume 3: Sections 12 through 14

The design of an economically viable supersonic cruise aircraft requires the lowest attainable structural-mass fraction commensurate with the selected near-term structural material technology. To achieve this goal of minimum structural-mass fraction, various combinations of promising wing and fuselage primary structure were analyzed for the load-temperature environment applicable to the arrow wing configuration. This analysis was conducted in accordance with the design criteria specified and included extensive use of computer-aided analytical methods to screen the candidate concepts and select the most promising concepts for the in-depth structural analysis.

Sakata, I. F.↗

NASA NTRS1976

The NASA structures and materials research program for supersonic cruise aircraft

The structures and materials part of the NASA Supersonic Cruise Aircraft Research (SCAR) program is reviewed. It is pointed out that in more than three years of work significant new technology has been generated. The aircraft configurations which are efficient aerodynamically have aeroelastic problems that must be alleviated by configuration changes, active controls, or additional structural mass. An approach involving the application of advanced composite materials has the highest potential for structural weight reduction. Attention is given to the structural concepts for an arrow-wing supersonic aircraft and the techniques used in the investigations. It is expected that continuing research in SCAR structures and materials should bring high payoffs in the late 1980s.

Cooper, P. A.↗

NASA NTRS1976

The interplanetary magnetic field structure

The seasonal bias in the sector structure of the interplanetary magnetic field has led to the suggestion that the field in each hemisphere of the solar cavity has the same polarity as the average magnetic field at the corresponding solar pole, and that the surface which separates the two polarity regions is only slightly warped. In this scheme the observed sector structure results from corotation of the warped surface past the earth with the angular velocity of the sun. This picture of the interplanetary field structure provides a simple explanation for the solar magnetic cycle periodicity of the diurnal variation of energetic cosmic rays. A discrepancy between the large latitudinal extent of the photospheric sector structure and the apparently small extent of the interplanetary sector structure places constraints on models of the origin of the solar wind. The discrepancy can be resolved if the solar wind originates high in the solar atmosphere where the geometry of the interplanetary field is simplified by magnetic stresses, or if coronal holes produce a large portion of the solar wind.

Levy, E. H.↗

NASA NTRS1976

Reliability analysis of structures under periodic proof tests in service

A reliability analysis of structures subjected to random service loads and periodic proof tests treats gust loads and maneuver loads as random processes. Crack initiation, crack propagation, and strength degradation are treated as the fatigue process. The time to fatigue crack initiation and ultimate strength are random variables. Residual strength decreases during crack propagation, so that failure rate increases with time. When a structure fails under periodic proof testing, a new structure is built and proof-tested. The probability of structural failure in service is derived from treatment of all the random variables, strength degradations, service loads, proof tests, and the renewal of failed structures. Some numerical examples are worked out.

Yang, J.-N.↗

NASA NTRS1975

NASA Office of Aeronautical and Space Technology Summer Workshop. Volume 6: Structures and dynamics panel

Structural requirements for future space missions were defined in relation to technology needs and payloads. Specific areas examined include: large area space structures (antennas, solar array structures, and platforms); a long, slender structure or boom used to support large objects from the shuttle or hold two bodies apart in space; and advanced composite structures for cost effective weight reductions. Other topics discussed include: minimum gage concepts, high temperature components, load and response determination and control, and reliability and life prediction.

Source record↗

NASA NTRS1976

Considerations for the application of finite element beam modeling to vibration analysis of flight vehicle structures

The manner of representing a flight vehicle structure as an assembly of beam, spring, and rigid-body components for vibration analysis is described. The development is couched in terms of a substructures methodology which is based on the finite-element stiffness method. The particular manner of employing beam, spring, and rigid-body components to model such items as wing structures, external stores, pylons supporting engines or external stores, and sprung masses associated with launch vehicle fuel slosh is described by means of several simple qualitative examples. A detailed numerical example consisting of a tilt-rotor VTOL aircraft is included to provide a unified illustration of the procedure for representing a structure as an equivalent system of beams, springs, and rigid bodies, the manner of forming the substructure mass and stiffness matrices, and the mechanics of writing the equations of constraint which enforce deflection compatibility at the junctions of the substructures. Since many structures, or selected components of structures, can be represented in this manner for vibration analysis, the modeling concepts described and their application in the numerical example shown should prove generally useful to the dynamicist.

Kvaternik, R. G.↗

NASA NTRS1976

On some structure-turbulence interaction problems

The interactions between a turbulent flow structure; responding to its excitation were studied. The turbulence was typical of those associated with a boundary layer, having a cross-spectral density indicative of convection and statistical decay. A number of structural models were considered. Among the one-dimensional models were an unsupported infinite beam and a periodically supported infinite beam. The fuselage construction of an aircraft was then considered. For the two-dimensional case a simple membrane was used to illustrate the type of formulation applicable to most two-dimensional structures. Both the one-dimensional and two-dimensional structures studied were backed by a cavity filled with an initially quiescent fluid to simulate the acoustic environment when the structure forms one side of a cabin of a sea vessel or aircraft.

Maekawa, S.↗

NASA NTRS1977

Development of fire-resistant wood structural panels

Structural panels made with Xylok 210 resin as the binder had a burn-through resistance at least equal to the structural panels made with Kerimid 500. Therefore, because of its comparative ease of handling, Xylok 210 was selected as the resin binder to provide the baseline panel for the study of a means of improving the flame-spread resistance of the structural panels. The final resin-filler system consisted of Xylok 210 binder with the addition of ammonium oxalate and ammonium phosphate to the strands of the surface layers, using 24% of each salt based upon the air-dry weight of the strands. This system resulted in a panel with a flame-spread code of about 60, a Class 2 classification. A standard phenolic based structural panel had a flame-spread greater than 200 for laboratory prepared panels. The burn-through tests indicated an average burn-through time of 588 seconds for the specimens made with the final system. This compares to an average burn-through time of 287 seconds for the standard phenolic base structural specimen. One full-size panel was made with the final system.

Vaughan, T. W.↗

NASA NTRS1976

Adsorption of oxygen on W/100/ - Adsorption kinetics and structure

The adsorption of oxygen on W(100) single-crystal surfaces is studied by Auger electron spectroscopy (AES), flash desorption, low-energy electron diffraction (LEED), and retarding-field work-function measurements. The AES results reveal stepwise changes in the sticking coefficients in the coverage range 0 to 1 and activated adsorption at higher coverages. Upon room-temperature adsorption, a series of complex LEED patterns is observed. In layers adsorbed at 1050 K and cooled to room temperature, the p(2 x 1) structure is the first ordered structure observed. This structure shows a reversible order-disorder transition between 700 and 1000 K and is characterized by a work function which is lower than that of the clean surface. Heating room-temperature adsorbates changes their structure irreversibly. At temperatures below 750 K, some new structures are observed.

Bauer, E.↗

NASA NTRS1977

A multilevel approach for minimum weight structural design including local and system buckling constraints

A rational multilevel approach for minimum weight structural design of truss and wing structures including local and system buckling constraints is presented. Overall proportioning of the structure is achieved at the system level subject to strength, displacement and system buckling constraints, while the detailed component designs are carried out separately at the component level satisfying local buckling constraints. Total structural weight is taken to be the objective function at the system level while employing the change in the equivalent system stiffness of the component as the component level objective function. Finite element analysis is used to predict static response while system buckling behavior is handled by incorporating a geometric stiffness matrix capability. Buckling load factors and the corresponding mode shapes are obtained by solving the eigenvalue problem associated with the assembled elastic stiffness and geometric stiffness matrices for the structural system. At the component level various local buckling failure modes are guarded against using semi-empirical formulas. Mathematical programming techniques are employed at both the system and component level.

Schmit, L. A., Jr.↗

NASA NTRS1976

A new role for structures technology in aircraft configuration development

It is pointed out that decisions made during configuration development determine nearly 60% of the total program cost. The key to the new Structures Technology role considered is the development of integrated computer systems for structural design and analysis. Such systems make it possible to include structural sizing within the scope of preliminary configuration development. Analysis models are discussed, taking into account approaches used to determine the structural weight of an aircraft in the preliminary design stage, a finite element representation for a supersonic arrow wing transport, and the aerodynamic model. Attention is given to automated design considerations and a study which was conducted to reduce the aerodynamic drag of a supersonic transport by blending the structure of the wing and fuselage.

Nisbet, J. W.↗

NASA NTRS1976

An automated procedure for preliminary design of primary structure for transport Aircraft

A multistation structural synthesis procedure, designed to perform structural sizing and detail design of boxbeam structure, is presented. The design procedure combines the use of an iterative sizing technique for distributing material to structural elements with a nonlinear programming technique to finding efficient structural element designs of a given weight. Constraints based on fatigue and fracture criteria and static strength criteria under multiple loading conditions are considered, as well as constraints on the upper and lower bounds of the actual design variables. Emphasis is placed on the overall design procedure and the technique used to include the fatigue and fracture criteria.

Kruse, G. S.↗

NASA NTRS1976

Lightweight Space Tug body structure

Lightweight honeycomb sandwich construction using a wide variety of metal and fibrous composite faceskins was used in the design of a typical Space Tug skirt structure. Relatively low magnitude combined loading of axial compression and torsion resulted in designs using ultrathin faceskins, lightweight honeycomb cores, and thin faceskin/core adhesive bond layers. Two of the designs with metal faceskins (aluminum and titanium) and four with fibrous composite faceskins (using combinations of fiberglass, boron, and graphite) were evaluated through the fabrication and structural test of a series of small development panels. The two most promising concepts with aluminum and graphite/epoxy faceskins, were further evaluated through the fabrication and structural test of larger compression and shear panels. All panels tested exceeded design ultimate load levels, thereby, verifying the structural integrity of the selected designs. Projected skirt structural weights for the graphite/epoxy and aluminum concepts fall within original weight guidelines established for the Space Tug vehicle.

Lager, J. R.↗

NASA NTRS1977

Numerical analysis of free vibrations of damped rotating structures

This paper is concerned with the efficient numerical solution of damped and undamped free vibration problems of rotating structures. While structural discretization is achieved by the finite element method, the associated eigenproblem solution is effected by a combined Sturm sequence and inverse iteration technique that enables the computation of a few required roots only without having to compute any other. For structures of complex configurations, a modal synthesis technique is also presented, which is based on appropriate combinations of eigenproblem solution of various structural components. Such numerical procedures are general in nature, which fully exploit matrix sparsity inherent in finite element discretizations, and prove to be most efficient for the vibration analysis of any damped rotating structure, such as rotating machineries, helicopter and turbine blades, spinning space stations, among others.

Gupta, K. K.↗

NASA NTRS1977

Do changes in coronal emission structure imply magnetic reconnection

Several physical processes that can affect the emission from structures in the corona are investigated on the basis of images of coronal X-ray and XUV emission structures. Changes in emission accompanied by little or no change in large-scale magnetic structure are examined, and three theoretically distinct processes by which magnetic structure can change are discussed: reconfiguration of potential (current-free) fields, reconfiguration of frozen-in fields, and reconfiguration by magnetic-field-line reconnection. The possibility is considered of determining by observation whether a change in emission results from a magnetic change and, if so, what kind of magnetic change has occurred. It is concluded that changes in coronal emission structure do not necessarily imply magnetic reconnection.

Nolte, J. T.↗

NASA NTRS1978

Cost-effective use of minicomputers to solve structural problems

Minicomputers are receiving increased use throughout the aerospace industry. Until recently, their use focused primarily on process control and numerically controlled tooling applications, while their exposure to and the opportunity for structural calculations has been limited. With the increased availability of this computer hardware, the question arises as to the feasibility and practicality of carrying out comprehensive structural analysis on a minicomputer. This paper presents results on the potential for using minicomputers for structural analysis by (1) selecting a comprehensive, finite-element structural analysis system in use on large mainframe computers; (2) implementing the system on a minicomputer; and (3) comparing the performance of the minicomputers with that of a large mainframe computer for the solution to a wide range of finite element structural analysis problems.

Storaasli, O. O.↗