Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Orbital and spin character of doped carriers in infinite-layer nickelates

The recent discovery of superconductivity in Nd1-xSrxNiO2 has drawn significant attention in the field. A key open question regards the evolution of the electronic structure with respect to hole doping. Here we exploit x-ray absorption spectroscopy (XAS) and resonant inelastic x-ray scattering (RIXS) to probe the doping-dependent electronic structure of Nd1-xSrxNiO2. Upon doping, a high-energy feature in Ni L3-edge XAS develops in addition to the main absorption peak, while XAS at the O K-, Nd M3- and Nd M5-edge exhibits a much weaker response. This implies that doped holes are mainly introduced into Ni 3d states. By comparing our data to atomic multiplet calculations including D4h crystal field, the doping-induced feature in Ni L3-edge XAS is consistent with a d8 spin-singlet state in which doped holes reside in the 3dx2-y2 orbitals. This is further supported by the softening of RIXS orbital excitations due to doping, corroborating with the Fermi level shift associated with increasing holes in the Ni 3dx2-y2 orbital.

2-dimensional systems↗
DOE OSTI2022

Elasticity of two-dimensional ferroelectrics across their paraelectric phase transformation

The mechanical behavior of two-dimensional (2D) materials across 2D phase changes is unknown, and the finite temperature (T) elasticity of paradigmatic SnSe monolayers—ferroelectric 2D materials turning paraelectric as their unit cell turns from a rectangle into a square—is described here in a progressive manner. To begin with, their zero–T total energy landscape gives way to (Boltzmann-like) averages from which the elastic behavior is determined. Furthermore, these estimates are complemented with results from the strain-fluctuation method, which employs the energy landscape or ab initio molecular dynamics data. All approaches capture the coalescence of elastic moduli < C 11 (T) > = < C 22 (T) > due to the structural transformation. The broad evolution and sudden changes of elastic parameters < C 11 (T) >, < C 22 (T) >, and < C 12 (T) > of these atomically thin phase-change membranes establishes a heretofore overlooked connection among 2D materials and soft matter.

2-dimensional systems↗
DOE OSTI2022

Dimensional crossover and symmetry transformation of charge density waves in VSe 2

Collective phenomena in solids can be sensitive to the dimensionality of the system; a case of special interest is VSe 2 , which shows a (√7×√3) charge density wave (CDW) in the single layer with threefold symmetry in the normal phase spontaneously broken, in contrast to the (4×4) in-plane CDW in the bulk. Angle-resolved photoemission spectroscopy (ARPES) from VSe 2 ranging from a single layer to the bulk reveals the evolution of the electronic structure including the Fermi surface contours and the CDW gap. At a thickness of two layers, the ARPES maps are already nearly bulklike, but the transition temperature T C for the (4×4) CDW is much higher than the bulk value of 110 K. These results can be understood as due to dimensional crossover of phonon instability driven by a competition of nesting vectors. Here, in this letter, we provide key insights into the CDW mechanisms and offer a perspective in the search and control of emergent phases in quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Long-range magnetic order induced surface state in GdBi and DyBi

The recent discovery of unconventional surface-state pairs, which give rise to Fermi arcs and spin textures, in antiferromagnetically ordered rare-earth monopnictides attracted the interest in these materials. Here, we use angle-resolved photoemission spectroscopy measurements in conjunction with density functional theory calculations to investigate the evolution of the electronic structure of GdBi and DyBi. We find that new surface states, including a Dirac cone, emerge in the antiferromagnetic (AFM) state. However, they are located along a direction in momentum space that is different than what was found in NdSb, NdBi, and CeBi. The observed changes in the electronic structure are consistent with the presence of AFM-II-A type order.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Identification of a new isomeric state in 76 Zn following the β decay of 76 Cu

Background: The evolution of nuclear shell structure far from stability can be explored by identifying and measuring the properties of isomers. Neutron-rich nuclei between the Z = 28 and Z = 50 closed shells have been the subject of recent studies which have identified a number of 0.1 - 10 µs isomers and measured detailed spectroscopic properties. Purpose: The purpose of this analysis was to identify and measure the properties of short-lived isomeric states populated following β decay in Z ≈ 30, N ≈ 50 nuclei near the doubly magic nucleus 78 Ni. Methods: Here, radioactive ions produced by beam fragmentation at the National Superconducting Cyclotron Laboratory were implanted into a CeBr 3 scintillator coupled to a pixelated photomultiplier tube. Ancillary arrays of HPGe clover and LaBr 3 detectors were positioned around the implantation detector to measure β-delayed γ rays. Results: The previously observed 2634-keV level in 76 Zn, populated following the β decay of 76 Cu, was identified as isomeric with a half-life of 25.4(4) ns. A combination of timing and γ-ray spectroscopy was used to confirm this assignment. Shell-model calculations were performed and indicate that this state may be a high-spin negativeparity state formed by the occupation of the ν0g 9/2 orbital. Conclusions: A new isomeric state in 76 Zn has been identified and its half-life was measured. Ambiguity about the structure of this state could be resolved with further experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Flow-Driven Branching in a Frangible Porous Medium

Channel formation and branching is widely seen in physical systems where movement of fluid through a porous structure causes the spatiotemporal evolution of the medium. We provide a simple theoretical framework that embodies this feedback mechanism in a multiphase model for flow through a frangible porous medium with a dynamic permeability. Numerical simulations of the model show the emergence of branched networks whose topology is determined by the geometry of external flow forcing. Furthermore, this allows us to delineate the conditions under which splitting and/or coalescing branched network formation is favored, with potential implications for both understanding and controlling branching in soft frangible media.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Controlling phonon lifetimes via sublattice disordering in AgBiSe 2

Understanding and controlling microscopic heat transfer mechanisms in solids is critical to material design in numerous technological applications. Yet, the current understanding of thermal transport in semiconductors and insulators is limited by the difficulty in directly measuring individual phonon lifetimes and mean free paths, and studying their dependence on the microscopic state of the material. Here in this paper, we report our measurements of microscopic phonon scattering rates in AgBiSe 2 , which exhibits a controllable, reversible change directly linked to microstructure evolution near a reversible structural phase transition, that directly impacts the thermal conductivity. We demonstrate a steplike doubling of phonon scattering rates resultant from the cation disordering at the structural transition. To rationalize the neutron scattering data, we leverage a stepwise approach to account for alterations to the thermal conductivity that are imparted by distinct scattering mechanisms. These results highlight the potential of tunable microstructures housed in a stable crystal matrix to provide a practical route to tailor phonon scattering to optimize thermal transport properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Reverse segregation and self-organization in inclined chute flows of bidisperse granular mixtures

In the usual segregation scenario for stable inclined chute flows of bidisperse mixtures of fine and coarse spherical particles, coarse particles rise toward the free surface, forming a coarse-rich region atop the flowing pile. Beyond a threshold coarse-to-fine diameter ratio of approximately 4, conversely, the weight of the coarse particles exceeds the segregation driving forces, causing individual coarse particles to sink within the pile and producing a reversed segregation state. However, an understanding of the collective evolution of the pile structure is still lacking when the particle diameter ratio exceeds 4 and the coarse-particle mass fraction is appreciable. To explore this broadly bidisperse limit, we perform discrete element method simulations considering mean particle diameter ratios of up to 8 and coarse-particle mass fractions spanning 0.1 to 0.9. The steady-state flow profiles reveal several intriguing behaviors that depend on the diameter ratio and mass fraction. These include a previously identified transition from usual to reverse segregation and a newfound tendency to self-organize into alternating coarse- and fine-rich particle layers stacked along the shear gradient direction, with layer thickness dictated by the coarse-particle diameter. A fuller understanding of segregation at this scale could pave the way for enhanced mixing or demixing techniques at the commercial scale.

granular flow↗
DOE OSTI2024

Assembly, comparative analysis, and utilization of a single haplotype reference genome for soybean

Cultivar Williams 82 has served as the reference genome for the soybean research community since 2008, but is known to have areas of genomic heterogeneity among different sub-lines. This work provides an updated assembly (version Wm82.a6) derived from a specific sub-line known as Wm82-ISU-01 (seeds available under USDA accession PI 704477). The genome was assembled using Pacific BioSciences HiFi reads and integrated into chromosomes using HiC. The 20 soybean chromosomes assembled into a genome of 1.01Gb, consisting of 36 contigs. The genome annotation identified 48 387 gene models, named in accordance with previous assembly versions Wm82.a2 and Wm82.a4. Comparisons of Wm82.a6 with other near-gapless assemblies of Williams 82 reveal large regions of genomic heterogeneity, including regions of differential introgression from the cultivar Kingwa within approximately 30 Mb and 25 Mb segments on chromosomes 03 and 07, respectively. Additionally, our analysis revealed a previously unknown large (> 20 Mb) heterogeneous region in the pericentromeric region of chromosome 12, where Wm82.a6 matches the ‘Williams’ haplotype while the other two near-gapless assemblies do not match the haplotype of either parent of Williams 82. In addition to the Wm82.a6 assembly, we also assembled the genome of ‘Fiskeby III,’ a rich resource for abiotic stress resistance genes. A genome comparison of Wm82.a6 with Fiskeby III revealed the nucleotide and structural polymorphisms between the two genomes within a QTL region for iron deficiency chlorosis resistance. The Wm82.a6 and Fiskeby III genomes described here will enhance comparative and functional genomics capacities and applications in the soybean community.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

MSASGCN : Multi-Head Self-Attention Spatiotemporal Graph Convolutional Network for Traffic Flow Forecasting

Traffic flow forecasting is an essential task of an intelligent transportation system (ITS), closely related to intelligent transportation management and resource scheduling. Dynamic spatial-temporal dependencies in traffic data make traffic flow forecasting to be a challenging task. Most existing research cannot model dynamic spatial and temporal correlations to achieve well-forecasting performance. The multi-head self-attention mechanism is a valuable method to capture dynamic spatial-temporal correlations, and combining it with graph convolutional networks is a promising solution. Therefore, we propose a multi-head self-attention spatiotemporal graph convolutional network (MSASGCN) model. It can effectively capture local correlations and potential global correlations of spatial structures, can handle dynamic evolution of the road network, and, in the time dimension, can effectively capture dynamic temporal correlations. Experiments on two real datasets verify the stability of our proposed model, obtaining a better prediction performance than the baseline algorithms. The correlation metrics get significantly reduced compared with traditional time series prediction methods and deep learning methods without using graph neural networks, according to MAE and RMSE results. Compared with advanced traffic flow forecasting methods, our model also has a performance improvement and a more stable prediction performance. We also discuss some problems and challenges in traffic forecasting.

Cao, Yang↗
DOE OSTI2024

Dynamic Graph Sequence Data from Simulated Neutron Reflectometry Measurements

This dataset comprises dynamic graph sequences derived from simulated in-situ neutron reflectometry measurements, capturing the gradual evolution of a layer structure over time. Each graph sequence represents a synthetic sample, with node features detailing the scattering vector and corresponding reflectivity measurements, while adjacency matrices have corresponding reference material parameters attached as metadata. The dataset spans multiple sets, each with a different number of sequences, offering a comprehensive basis for training models that handle dynamic input sequences with embedded physics. This dataset is particularly suited for tackling inverse problems with hidden physical states that evolve over time, challenges that are typically difficult to address using conventional iterative fitting methods.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Multiscale modeling of shear banding in metallic glasses (Final report)

Metallic glasses (MGs) possess remarkably high strength but suffer from minimal tensile ductility due to the formation of catastrophic shear bands. The goal of this research project is to develop an understanding of the microstructures and deformation mechanisms that control shear banding in MGs, which will enable the development of MGs with enhanced plasticity. Two scientific objectives have been pursued. (1) Understand the underlying mechanisms of shear banding phenomena in presence of nanoscale heterogeneities in MGs. (2) Understand the evolution of MG heterogenous structure upon thermomechanical stimuli for plasticity enhancement through controlling and distributing multiple shear bands.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Table-Top High Photon Energy Sources for Chemical Dynamics Investigations

Time-resolved spectroscopies using high-energy photons in the vacuum ultraviolet (VUV) to the X-ray region of the electromagnetic spectrum, have proven to be powerful probes of chemical dynamics. These high-energy photons can access valence and core orbitals of molecules and materials, providing key information on molecular and electronic structure and their time evolution. This report details the development of table-top sources of extreme ultraviolet (XUV) and VUV pulses at Sandia National Laboratories for use in studies of gas phase chemical dynamics. Femtosecond duration XUV pulses are produced using laser-driven high harmonic generation and their detected range span ~40-140 eV photon energies. These pulses are used in conjunction with ultraviolet pulses in a pump-probe scheme to study excited state dynamics of gas phase molecules. VUV pulses at 7.75 eV are generated using a four-wave-mixing scheme driven by 800 nm and 266 nm pulses in an argon-filled hollow-core fiber.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

3D printed Ni-Mn-Fe Bi-Functional Catalyst for Metal Air Batteries

Oxygen evolution catalyst with porous structures on the submillimeter and millimeter ranges have been shown to have high catalytic activity. Often, a limiting factor in the performance of a catalyst can be its specific surface area as this can limit the availability of active sites which encourage the desired reaction. As such, the inclusion of a hierarchical structure that include both meso-scale and nano-scale porosity can offer a means to greatly increase the performance of electrochemical catalysts. We have developed a method for manufacturing samples with such a hierarchical structure by combining techniques of direct ink writing (DIW), thermal sintering and free corrosion based dealloying. This allows us to prepare three-dimensionally structured samples with open-cell porosity at the macro-, micro- and nano-scales. Each level of porosity offers a different advantage to the overall functionality and applicability of this technology.

25 ENERGY STORAGE↗
DOE OSTI2022

Scattering Amplitudes and QFT Insight (Final Scientific Report)

The calculation of scattering amplitudes provides an invariant window into the physical dynamic content of relativistic quantum field theory. Yet with traditional methods, for empirically relevant theories, these calculations scale with a factorial complexity in external particles and precision. If we aspire to collapse the theoretical uncertainty obscuring new physics hidden at all scales from the microscopic probed at high energy colliders to the largest effective field theory in the universe governing the evolution of large scale structure, this complexity challenge necessitates new ideas and methods in calculation. Novel approaches like the color-kinematics duality and the associated double-copy construction have drastically simplified the situation, relating both gauge and gravity theory predictions to a much smaller kernel of invariant kinematic data. This project supporting research by the PI's Amplitudes and Insights group at Northwestern University looked to push insight deep into both the IR and the UV by establishing how novel structures must constrain the predictions of counterterms in both gauge and gravity theories, setting the groundwork to exploring the high energy behavior of particular gravity theories via constituent gauge-theory calculations, and confronting fundamental challenges at the interface between QFT amplitudes analysis and next generation gravitational wave science as well as well as inflationary and large scale structure cosmology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Making a Deal with the Devilfish: Biometric-Informed Screening Technology CRADA - 514 (Final Report)

This report documents an investigation into the performance of a novel fish-protection screen intended to prevent small aquatic and marine organisms from entering water intakes in free-flowing water bodies. The proposed prototype screen resembles conventional, slotted fish-protection screens with parallel wires or bars; however, the prototype bars are shaped to mimic the filter elements in the mouths of filter-feeding fishes such as the devil ray (Mobula tarapacana). Millions of years of evolution have perfected these structures to provide energetically efficient and clog-resistant filtering of zooplankton from seawater. The intent of the prototype is to exploit these mechanisms for the protection of similarly sized, or larger, organisms in settings where the freely flowing current is approximately parallel with the screen face (i.e., sweeping flow) and perpendicular to the screen bars.

42 ENGINEERING↗
DOE OSTI2022

Inorganometallic Catalyst Design Center (ICDC) EFRC Accomplishments

The ICDC focused largely on heterogeneous catalysis of oxidative chemical transformations, especially those that came to prominence as natural gas (wet shale gas) supplanted crude oil as the primary feedstock in North America for carbon-based manufacturing of commodity chemicals. Driven by fracking-enabled access to enormous stores of shale-trapped wet gas, the feedstock change from oil to gas enabled a shift away from high-temperature catalytic breakdown of large hydrocarbons to catalytic build-up of C4, C3, C2, and C1 into desired intermediates, but now at much more modest temperatures. In turn, the much lower thermal force accompanying these kinds of reactions facilitates catalyst stabilization and characterization, including operando characterization, while slowing on-stream catalyst evolution (i.e., preserving catalyst structure), accommodating catalyst complexity, and enabling creation of uniform arrays of heterogeneous catalysts with single-atom or near-single-atom precision—at least for model systems. Together these features have proven to be a boon to hypothesis-driven catalysis science and to experimentally testable computation-based design advances and mechanism explication. The ICDC has greatly facilitated the integration of catalyst synthesis, advanced characterization, performance assessment, and computational elucidation—with advances in each of these realms spurring achievements in catalysis science and complementary realms.

03 NATURAL GAS↗