Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “specifications standards”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

The Role of SmallSats in Scientific Exploration and Commercialization of Space

Over the past decade, SmallSats have been established as having great potential for science exploration and commercialization of space. The SmallSat revolution aims to decrease the cost of space development, making space exploration accessible to students, educators, and public citizens. These efforts have focused on miniaturization of instruments and space platforms, as well as reducing their cost, mass, and needed power. In addition to enabling scientific exploration, SmallSats provide affordable means for the public to purchase remote sensing and communication products on a global scale. SmallSat mission concepts are particularly powerful when they are deployed in distributed architecture or constellations. For example, the most promising observation techniques for global science measurements of the Earth system and space weather require multi-point distributed observations of the Earth system at a feasible cost. The high cost of access to space has long been a barrier, especially with the prohibitive cost of large satellites. Affordable SmallSat constellations can be game-changers, enabling scientific exploration as well as commercial global data products. In this paper, we highlight investments made by NASA to date (specifically a study in developing and prototyping a SmallSat platform with standard interfaces), along with several example mission concept scenarios in Earth and space science (astrophysics, heliophysics, and planetary) applications that can be achieved using this platform.

technology development↗

BPv6 and BPv7 Coexistence in Delay Tolerant Networking (DTN)

As DTN has progressed since its inception in 2002, the community stabilized around Bundle Protocol version 6 (BPv6). This protocol was standardized by the RFC 5050’s definition of BPv6 and was later standardized and refined for space operations by the CCSDS Bundle Protocol Specification. After the release of RFC 5050, a variety of implementations and missions used BPv6 and noted several improvements that could be made to the protocol. These improvements culminated in a push to release a new protocol version, BPv7. Unfortunately, the vast improvements and difference in encoding that separates BPv7 from BPv6 also makes the two versions inherently incompatible. Consequently, there is an issue implementing BPv7 in existing systems while continuing support for BPv6 implementations. In response to this issue, two solutions emerge: (1) Bundle-in-Bundle Encapsulation (BIBE), a capability that wraps a bundle in another bundle for shipping between intermediary nodes, and (2) version agnostic DTN implementations. These concepts have been proven out in the MSFC DTN implementation known as DTNME.

Joshua Deaton↗

Springer Handbook of Atmospheric Measurements: Chapter 39: Airborne Radar

Ground-based radar systems have been used to observe clouds and precipitation since the 1940s. While weather radars that use centimeter waves can observe precipitation several hundred kilometers away, radars that are dedicated to cloud observations use millimeter waves and have limited ranges of just a few tens of kilometers. Airborne radars have the advantages that they can perform measurements close to the region of interest and they provide radar information on regions that ground-based radars cannot access. There is no such thing as a standard airborne radar system; all systems are tailored for use on specific research aircraft, although some of them are designed to be modular so that they can be mounted on various aircraft. Airborne radar systems use frequencies ranging from those in the X band to those in the W band. Radars that use shorter wavelengths are preferred due to spatial restrictions on antenna size in aircraft, but C-band systems are also being considered for installation in large aircraft. Besides reflectivity (the backscatter signal), the radial motions of scattering particles can be measured and used to retrieve atmospheric motion. In addition, several airborne radars are able to measure dual-polarization backscatter signals that can be employed to identify different types of hydrometeors.

Martin Hagen↗

NASA Balloon Program Overview (2021-2023)

The United States National Aeronautics and Space Administration's (NASA) Balloon Program offers low-cost access to a near-space environment. As the science community's needs continue to evolve, the NASA Balloon Program adjusts to support the scientific community, providing enhanced capabilities across a spectrum of balloon-related disciplines. The disciplines supported by the NASA Balloon Program include astrophysics, heliophysics, planetary science, earth science, technology development, and education. A broad overview of the NASA Balloon Program that touches on critical highlights, including launch locations, standard systems, and development efforts will be presented. In addition, the specific campaigns supported from 2021 through 2023 will be discussed. The period under review witnessed significant strides in balloon technology, payload instrumentation, and mission design, all aimed at enhancing the Program's scientific capabilities—the integration of cutting-edge technologies allowed for executing ambitious missions, and fostering collaboration with domestic and international partners. Specific information on commercial satellite communications with off-the-shelf hardware will be provided. The Program's strategic goals, emphasizing its commitment to advancing atmospheric and astrophysical research, are highlighted via the GUSTO mission. The Galactic/Extragalactic ULDB Spectroscopic Terahertz Observatory or GUSTO mission was the first NASA Explorer-class mission to utilize the balloon platform. The Program is vital in supporting educational and outreach activities, fostering the next generation of scientists and engineers. Collaborative efforts with educational institutions and outreach programs have expanded public engagement and inspired students to pursue careers in STEM fields. The Program's versatility and success in facilitating groundbreaking research underscore its continued significance in advancing our understanding of the Earth and the universe.

GUSTO↗

Evaluation of Automotive Grade Resistors for Space Flight

Over the past decade, electronic, electrical, and electromechanical (EEE) parts for space applications have undergone significant changes, largely driven by CubeSat and commercial space developers pushing the boundaries on the utilization of commercial parts in space. Global product shortages and shipping delays are still impacting space flight project deadlines. Many projects have turned to automotive grade resistors as an alternate to their MIL-SPEC counterparts to fulfill requirements. In addition, automotive grade resistors may offer designers a wider range of parts to consider. A recent NASA study recommended the use of high-volume manufactured commercial components for space applications provided these components show evidence of stringent fabrication controls and thorough reliability monitoring practices [1]. Automotive grade components have stringent qualification requirements per the Automotive Electronic Council (AEC). However, the end user usually does not have insight into the practices the manufacturer may use to reduce/eliminate infant mortality nor for compliance to all datasheet specifications. Screening, Life and Accelerated Life testing on a set of standard automotive-grade chip resistors is proposed to evaluate the reliability of these components. Requirements from both the AEC-Q (Automotive Electronic Council Qualification) and EEE-INST-002 (Instructions for EEE Parts Selection, Screening, Qualification, and Derating) for resistors is compared and discussed. The resistors have been tested by using a modified methodology from EEE-INST-002 to evaluate their reliability for space flight projects. The findings of this study indicate that the underlying degradation mechanisms at rated temperature and power are best represented by power law models with a fitted exponent between 0 and 1. A linear model is more conservative which compensates for potential model uncertainty given the wide range of design and materials used in automotive resistors, while still providing useful long-term resistance drift estimates. No electrical anomalies or failures were observed throughout the 1,000-hour Life Tests other than small in tolerance resistance drift aging. Degradation models were utilized to quantify and extrapolate the long-term resistance drift under operating conditions for the components. The models demonstrated that some automotive-grade resistors are likely to operate 10 years at nominal usage conditions while others might fail earlier.

Zainab Abdullahi↗

Evaluation of Automotive Grade Resistors for Space Flight

Over the past decade, electronic, electrical, and electromechanical (EEE) parts for space applications have undergone significant changes, largely driven by CubeSat and commercial space developers pushing the boundaries on the utilization of commercial parts in space. Global product shortages and shipping delays are still impacting space flight project deadlines. Many projects have turned to automotive grade resistors as an alternate to their MILSPEC counterparts to fulfill requirements. In addition, automotive grade resistors may offer designers a wider range of parts to consider. A recent NASA study recommended the use of high-volume manufactured commercial components for space applications provided these components show evidence of stringent fabrication controls and thorough reliability monitoring practices. Automotive grade components have stringent qualification requirements per the Automotive Electronic Council (AEC). However, the end user usually does not have insight into the practices the manufacturer may use to reduce/eliminate infant mortality nor for compliance to all datasheet specifications. Screening, Life and Accelerated Life testing on a set of standard automotive-grade chip resistors is proposed to evaluate the reliability of these components. Requirements from both the AEC-Q (Automotive Electronic Council Qualification) and EEE-INST-002 (Instructions for EEE Parts Selection, Screening, Qualification, and Derating) for resistors is compared and discussed. The resistors have been tested by using a modified methodology from EEEINST-002 to evaluate their reliability for space flight projects. The findings of this study indicate that the underlying degradation mechanisms at rated temperature and power are best represented by power law models with a fitted exponent between 0 and 1. A linear model is more conservative which compensates for potential model uncertainty given the wide range of design and materials used in automotive resistors, while still providing useful long-term resistance drift estimates. No electrical anomalies or failures were observed throughout the 1000-hour Life Tests other than small in tolerance resistance drift aging. Degradation models were utilized to quantify and extrapolate the long-term resistance drift under operating conditions for the components. The models demonstrated that some automotive-grade resistors are likely to operate 10 years at nominal usage conditions while others might fail earlier.

Zainab Abdullahi↗

A Revised International Standard for Gearboxes in Wind Turbine Systems

Gearbox and wind turbine design and application standards have contributed significantly to improvements in reliability over the past two decades. The International Electrotechnical Commission (IEC) 61400-4 standard of wind turbine gearbox design is currently being revised by a joint working group (JWG) of experts in IEC TC 88 (wind energy) and International Organization for Standardization (ISO) TC60 (gears) to further that effort. Experts from ISO TC4 (rolling bearings) and ISO TC28 (lubricants) have actively participated. This revision has implemented lessons learned from industry use of edition 1 since its publication in 2012. The main document, IEC 61400-4, was pared down to essential design requirements and application-specific recommendations along with a design verification framework. The JWG leveraged concurrent development of other standards, such as IEC 61400-8 on wind turbine structures, to replace edition 1 content. These are described along with how this works with the IEC Renewable Energy certification scheme for wind turbines (IECRE-WE). The JWG recognized the interest in maintaining informative parts of edition 1 including annexes on wind turbine architecture and loads, bearing and gear arrangements, bearing selection, lubrication system descriptions and lubricant performance recommendations. This information was retained in two technical reports: IEC/TR 61400-4-2 Lubrication and IEC/TR 61400-4-3 Explanatory Notes. Additionally, a technical specification, IEC/TS 61400-4-1, was drafted to provide a reliability calculation method for comparing different design options or conditions. Salient elements of these documents are described. All four documents were recently distributed for IEC/ISO review, ballot, and comment. Publication is expected in 2023.

gearbox↗

A Revised International Standard for Gearboxes in Wind Turbine Systems: Preprint

Gearbox and wind turbine design and application standards have contributed significantly to improvements in reliability over the past two decades. The International Electrotechnical Commission (IEC) 61400-4 standard of wind turbine gearbox design is currently being revised by a joint working group (JWG) of experts in IEC TC 88 (wind energy) and International Organization for Standardization (ISO) TC60 (gears) to further that effort. Experts from ISO TC4 (rolling bearings) and ISO TC28 (lubricants) have actively participated. This revision has implemented lessons learned from industry use of edition 1 since its publication in 2012. The main document, IEC 61400-4, was pared down to essential design requirements and application-specific recommendations along with a design verification framework. The JWG leveraged concurrent development of other standards, such as IEC 61400-8 on wind turbine structures, to replace edition 1 content. These are described along with how this works with the IEC Renewable Energy certification scheme for wind turbines (IECRE-WE). The JWG recognized the interest in maintaining informative parts of edition 1 including annexes on wind turbine architecture and loads, bearing and gear arrangements, bearing selection, lubrication system descriptions and lubricant performance recommendations. This information was retained in two technical reports: IEC/TR 61400-4-2 Lubrication and IEC/TR 61400-4-3 Explanatory Notes. Additionally, a technical specification, IEC/TS 61400-4-1, was drafted to provide a reliability calculation method for comparing different design options or conditions. Salient elements of these documents are described. All four documents were recently distributed for IEC/ISO review, ballot, and comment. Publication is expected in 2023.

ENGINEERING,WIND ENERGY↗

The proposed coding standard at GSFC

As part of the continuing effort to introduce standardization of spacecraft and ground equipment in satellite systems, NASA's Goddard Space Flight Center and other NASA facilities have supported the development of a set of standards for the use of error control coding in telemetry subsystems. These standards are intended to ensure compatibility between spacecraft and ground encoding equipment, while allowing sufficient flexibility to meet all anticipated mission requirements. The standards which have been developed to date cover the application of block codes in error detection and error correction modes, as well as short and long constraint length convolutional codes decoded via the Viterbi and sequential decoding algorithms, respectively. Included are detailed specifications of the codes, and their implementation. Current effort is directed toward the development of standards covering channels with burst noise characteristics, channels with feedback, and code concatenation.

Morakis, J. C.↗

The operational performance of hydrogen masers in the Deep Space Network (the performance of laboratory reference frequency standards in an operational environment)

Spacecraft navigation to the outer planets (Jupiter and beyond) places very stringent demands upon the performance of frequency and time (F&T) reference standards. The Deep Space Network (DSN) makes use of hydrogen masers as an aid in meeting the routine F&T operational requirements within the 64 m antenna network. Results as of October 1980 indicate the hydrogen masers are performing within the required specifications. Two problem areas are discussed: insufficient control over the environment in which the reference standards reside; and frequency drift.

Ward, S. C.↗

Evaluation of Aerobic Standards for Lunar Surface Extravehicular Activities

Introduction: As NASA prepares to return to the Moon, astronauts will need to be physically primed to successfully execute Extravehicular Activities (EVA) on the Lunar surface. Compared to past Apollo missions, Artemis missions will include EVAs of increased physical demand, frequency, intensity, and duration, thus requiring adequate fitness to successfully and safely complete mission objectives. The physical demand associated with partial gravity (g) EVAs on the Moon is expected to be greater compared to microgravity EVAs based on initial workload estimation. Currently, aerobic fitness standards for partial g EVAs are not well supported by high-fidelity data and require further research for establishing standards to protect crew health and performance during Lunar surface missions. Therefore, the aim of this investigation is to characterize metabolic data from Lunar analog simulations and in-flight crew population aerobic capacity data to validate the current NASA 3001 standard for celestial partial g aerobic fitness (aerobic capacity (VO_2pk) ≥36.5ml/kg/min). Methods: In order to evaluate aerobic fitness requirements for Lunar EVAs, the following were performed: 1) preliminary analysis of long-duration (6 hr) EVA analog simulations in the Neutral Buoyancy Laboratory (NBL) and the Active Response Gravity Offload System (ARGOS) to evaluate expected metabolic rates for 1/6 g EVAs (NBL: n=1 female; ARGOS: n=1 male) and 2) assessment of the current NASA 3001 celestial surface EVA aerobic standard (aerobic capacity (VO_2pk) ≥36.5ml/kg/min) with data from an ISS astronaut population (n=30 male + 13 female) captured before and during space flight (flight day 15). Preliminary Results: Average fractional aerobic capacity during simulated EVAs were 33%±7% VO_2pk and 23.3±7% VO_2pk in the NBL and ARGOS, respectively. This was within a previously predicted 30–40% sustainable work rate. Average metabolic rates for some tasks performed in the NBL, such as traverse (40.4% VO_2pk) and ingress (47.1% VO_2pk) were higher than the predicted sustainable work range. In ARGOS, the tasks with the greatest metabolic rates were object relocation (34.2% VO_2pk) and incapacitated crew rescue (27.0% VO_2pk). Characterization of ISS crewmember aerobic capacity determined that the average preflight VO_2pk was 42.1±5.4 ml/kg/min for females and 37.5±5.4 ml/kg/min for males. At preflight, 21.5% of crewmembers were below the 36.5 ml/kg/min in-mission aerobic standard for celestial surface EVA as outlined in NASA-STD-3001. In-flight, both female and male crewmembers experienced reductions in VO_2pk (11.7% and 10.9%, respectively), such that, during the mission, 62% of crewmembers were below the standard aerobic capacity level for celestial surface EVAs. Conclusions: Our preliminary data suggest that while average metabolic rates for simulated Lunar EVA fall within the 30–40% sustainable work range, task specific metabolic rates exceed this range and may indicate that greater fitness is necessary for more strenuous tasks expected to be performed on the Lunar surface. Additionally, deconditioning due to space flight results in most crewmembers falling below the current celestial partial g EVA standard, which may increase risk to crew health and performance and completing mission objectives for surface missions. Further research is necessary in Artemis-specific analog environments to validate the current NASA-3001 aerobic standard for celestial EVAs. Additionally, work is ongoing to validate the current NASA-3001 strength standard for celestial EVAs.

N.C. Strock↗

Standard Practices for Usage of Inductive Magnetic Field Probes with Application to Electric Propulsion Testing

Inductive magnetic field probes (also known as B-dot probes and sometimes as B-probes or magnetic probes) are often employed to perform field measurements in electric propulsion applications where there are time-varying fields. Magnetic field probes provide the means to measure these magnetic fields and can even be used to measure the plasma current density indirectly through the application of Ampere's law. Measurements of this type can yield either global information related to a thruster and its performance or detailed, local data related to the specific physical processes occurring in the plasma. Results of the development of a standard for B-dot probe measurements are presented, condensing the available literature on the subject into an accessible set of rules, guidelines, and techniques to standardize the performance and presentation of future measurements.

Polzin, Kurt A.↗

SpaceWire Driver Software for Special DSPs

A computer program provides a high-level C-language interface to electronics circuitry that controls a SpaceWire interface in a system based on a space qualified version of the ADSP-21020 digital signal processor (DSP). SpaceWire is a spacecraft-oriented standard for packet-switching data-communication networks that comprise nodes connected through bidirectional digital serial links that utilize low-voltage differential signaling (LVDS). The software is tailored to the SMCS-332 application-specific integrated circuit (ASIC) (also available as the TSS901E), which provides three highspeed (150 Mbps) serial point-to-point links compliant with the proposed Institute of Electrical and Electronics Engineers (IEEE) Standard 1355.2 and equivalent European Space Agency (ESA) Standard ECSS-E-50-12. In the specific application of this software, the SpaceWire ASIC was combined with the DSP processor, memory, and control logic in a Multi-Chip Module DSP (MCM-DSP). The software is a collection of low-level driver routines that provide a simple message-passing application programming interface (API) for software running on the DSP. Routines are provided for interrupt-driven access to the two styles of interface provided by the SMCS: (1) the "word at a time" conventional host interface (HOCI); and (2) a higher performance "dual port memory" style interface (COMI).

Clark, Douglas↗

Steps Toward Improved Integration, Search, and Analysis of Heterogeneous Data in the Astrobiology Habitable Environments Database

The Astrobiology Habitable Environments Database (AHED) is a new data system being developed as a long-term, open-access repository for astrobiology data. AHED is intended to store user-contributed results from NASA or externally-funded research in astrobiology, and to encourage sharing and synergy within the astrobiology community. However, the interdisciplinary nature of astrobiology presents some specific challenges to data management, integration, and analysis within AHED. In some disciplines (e.g., genomics), open databases thrive because the contributed products are fairly uniform and standardized (e.g., sequence data). In astrobiology, each investigation produces a unique set of data products; this makes it difficult to search across different datasets to find similar data, or to combine results from separate investigations. With AHED, we are taking steps to ensure there is adequate metadata - both at the dataset and record levels - to facilitate search, integration, and analysis. At the dataset level, we are developing a new metadata standard for describing astrobiology datasets, with detailed information about content, funding source, and scientific relevance, along with a set of topical keywords for characterizing datasets. At the record level, we are encouraging users to provide more structured content and finer-grained metadata. In many user-contributed science data repositories, few restrictions are placed on the uploaded data format, and minimal or no record-level metadata is required; thus users are unburdened when it comes to data preparation. The tradeoff is that deep integration and search across datasets is almost impossible without standardized structures and metadata. Although AHED users are free to upload minimally-described datasets, they will be encouraged to use database authoring tools (supplied by the underlying platform - Open Data Repository's Data Publisher) plus a set of customizable astrobiology-specific templates to help structure their data and provide standardized metadata. In reward for their extra effort, AHED will be able to deliver enhanced search, discovery, and analysis capabilities.

astrobiology↗

Lightweight Damage Tolerant, High-Temperature Radiators for Nuclear Power and Propulsion

NASA is increasingly emphasizing exploration to bodies beyond near-Earth orbit. New propulsion systems and new spacecraft are being built for these missions. As the target bodies get further out from Earth, high energy density systems, e.g., nuclear fusion, for propulsion and power will be advantageous. The mass and size of these systems, including supporting systems such as the heat exchange system, including thermal radiators, will need to be as small as possible. Conventional heat exchange systems are a significant portion of the total thermal management mass and size. Nuclear electric propulsion (NEP) is a promising option for high-speed, in-space travel due to the high energy density of nuclear fission power sources and efficient electric thrusters. Heat from the reactor is converted to power for use in propulsion or for system power. The heat not used in the power conversion is then radiated to space as shown in figure 1. Advanced power conversion technologies will require high operating temperatures and would benefit from lightweight radiator materials. Radiator performance dictates power output for nuclear electric propulsion systems. Pitch-based carbon fiber materials have the potential to offer significant improvements in operating temperature, thermal conductivity, and mass. These properties combine to allow significant decreases in the total mass of the radiators and significant increases in the operating temperature of the fins. A Center-funded project at NASA Marshall Space Flight Center has shown that high thermal conductivity, woven carbon fiber fins with no matrix material, can be used to dissipate waste heat from NEP systems and because of high specific power (kW/kg), will require less mass and possibly less total area than standard metal and composite radiator fins for radiating the same amount of heat. This project uses an innovative approach to reduce the mass and size required for the thermal radiators to the point that in-space NEP and power is enabled. High thermal conductivity carbon fibers are lightweight, damage tolerant, and can be heated to high temperature. Areal densities in the NASA set target range of 2 to 4 kg/m2 (for enabling NEP) are achieved and with specific powers (kW/kg) a factor of about 7 greater than conventional metal fins and about 1.5 greater than carbon composite fins. Figure 2 shows one fin under test. All tests were done under vacuum conditions.

Craven, Paul D.↗

A universal method to compare parts from STEP files

Abstract Model Based Definition (MBD) captures the complete specification of a part in digital form and leverages (at least) the universal “Standard for the Exchange of Product” (STEP) file format. MBD has revolutionized manufacturing due to time and cost savings associated with containing all engineering data within a single digital source. This work presents a novel method to transform digital definitions in any given STEP file into a tensor-like structure that is unique for each part and can be used to regenerate the original STEP file completely. Resulting STEP tensors are amenable to part comparison based on various part specifications in a general and straightforward manner. Here, part similarity is evaluated among sets of parts according to specific geometry, material composition, and design intent. Importantly, specification similarity can be quantified using only the tensors’ structure. As such, this approach is not limited to families of geometric shapes, part types, or fabrication methods; nor does it require any prior knowledge about the parts being compared.

36 MATERIALS SCIENCE↗

Apollo 16 LM-11 descent propulsion system final flight evaluation

The performance of the LM-11 Descent Propulsion System during the Apollo 16 Mission was evaluated and found to be satisfactory. The average engine effective specific impulse was 0.1 second higher than predicted, but well within the predicted 1 sigma uncertainty of 0.2 seconds. The engine performance corrected to standard inlet conditions for the FTP portion of the burn at 50 seconds after ignition was as follows: thrust, 9839 lbf; specific impulse, 306.9 sec; and propellant mixture ratio, 1.592. These values are +0.34, +0.03 and +0.0 percent different, respectively, from the values reported from engine acceptance tests and were within specification limits. Several flight measurement discrepancies that existed during the flight are discussed.

Avvenire, A. T.↗