Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “source term”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Three-Dimensional Mathematical Model of Oxygen Transport Behavior in Electroslag Remelting Process

A transient three-dimensional model has been proposed to investigate the oxygen transport behavior in electroslag remelting process. The electromagnetism, heat transfer, multiphase flow, and species transport were calculated simultaneously by finite volume method. The volume of fluid approach was adopted to trace the metal–slag–air three-phase flow. Based on the necessary thermodynamics of oxygen transport behavior, a kinetic model was established to predict the mass source terms in species transport equation. The kinetic correction factor was proposed to account for the effect of the oxide scale formed on the electrode on the FeO content in slag. Finally, the effect of applied current on the oxygen transfer was studied. The predicted result agrees well with the measured data when the kinetic correction factor is set to be 0.5. The temperature distribution that affects the thermodynamics differs at the interfaces. The oxygen in air is absorbed into slag due to the oxidation at the slag/air interface. The Fe{sub 2}O{sub 3} in slag and the oxide scale contribute to the increase of FeO content in slag, and the latter one plays the leading role. The oxygen transfer from slag to metal mainly occurs during the formation of the droplet at the slag/metal droplet interface. With the current increasing from 1200 to 1800 A, the oxygen content increases from 76.4 to 89.8 ppm, and then slightly declines to 89.2 ppm when the current increases to 2100 A.

36 MATERIALS SCIENCE↗

Well-Balanced Second-Order Convex Limiting Technique for Solving the Serre–Green–Naghdi Equations

In this article, we introduce a numerical method for approximating the dispersive Serre–Green–Naghdi equations with topography using continuous finite elements. The method is an extension of the hyperbolic relaxation technique introduced in Guermond et al. (J Comput Phys 450:110809, 2022). It is explicit, second-order accurate in space, third-order accurate in time, and is invariant-domain preserving. It is also well balanced and parameter free. Special attention is given to the convex limiting technique when physical source terms are added in the equations. The method is verified with academic benchmarks and validated by comparison with laboratory experimental data.

97 MATHEMATICS AND COMPUTING↗

Positivity-preserving high order well-balanced discontinuous Galerkin methods for the shallow water equations

Shallow water equations with a non-flat bottom topography have been widely used to model flows in rivers and coastal areas. An important difficulty arising in these simulations is the appearance of dry areas where no water is present, as standard numerical methods may fail in the presence of these areas. These equations also have still water steady state solutions in which the flux gradients are nonzero but exactly balanced by the source term. In this paper we propose a high order discontinuous Galerkin method which can maintain the still water steady state exactly, and at the same time can preserve the non-negativity of the water height without loss of mass conservation. A simple positivity-preserving limiter, valid under suitable CFL condition, will be introduced in one dimension and then extended to two dimensions with rectangular meshes. Numerical tests are performed to verify the positivity-preserving property, well-balanced property, high order accuracy, and good resolution for smooth and discontinuous solutions.

54 ENVIRONMENTAL SCIENCES↗

Benchmark problems in aerosol evolution: Comparison of some exact and DSMC results

Aerosols are generated in many normal or accident situations associated with the nuclear enterprise. For a good understanding and modeling of the nuclear source term, for example, good experimental data and computational programs relating to aerosol evolution are needed. In the past several years there has been an effort to explore use of the Direct Simulation Monte Carlo (DSMC) approach for such estimations to improve fidelity of computations to the actual physics and chemistry of the accidents. An integral part of these efforts has been verification and validation of the DSMC technique against other available results wherever possible. Herein this paper explores verification of DSMC against one existing and two new benchmark problems covering condensation, coagulation, deposition and two-component aerosols. The simulations compare well with the exact results, providing further confidence in the use of DSMC.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

SCALE depletion capabilities for molten salt reactors and other liquid-fueled systems

Nuclear reactor systems that use fuel dissolved in a liquid have the potential for enhanced safety characteristics, improved fuel-cycle outcomes, and more efficient isotope-production configurations. In these reactor systems, the fueled liquid may simultaneously undergo irradiation, physical and chemical removal processes, and fueling. The modeling and simulation of this transmutation and decay with material additions and removals is an ongoing research area. An accurate simulation tool is critical to the reactor and fuel-cycle design, reactor deployment, and source-term characterization for these advanced reactor systems. The work described herein involved implementing, testing, and applying the capability to perform reactor physics simulations within the Oak Ridge National Laboratory-developed SCALE suite for nuclear systems analyses and design, leveraging much of its pedigree in quality-assurance and reactor-analysis capabilities. The functionalities to simulate irradiation with material feeds and removals had been added in ORIGEN, and the TRITON reactor physics sequence was extended to calculate the total removed material and track external nonirradiated mixtures to estimate separate processing or waste streams. Results from these capabilities align with analytical expectations obtained from ORIGEN for simplified test cases and with expectations for a molten salt reactor application. This implementation, available with the SCALE 6.3 release, provides for a more efficient and accurate material accountability methodology, allowing for the characterization, design, and analysis of the complete isotopic material inventory of advanced liquid-fueled systems for a variety of applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Graphite waste classification and disposal cost estimation for high temperature gas and salt reactors

As high-temperature reactor designs progress to demonstration, managing the radioactive wastes from these systems presents unique challenges. This work explores the irradiated graphite source term produced by three reactor designs: The Modular High Temperature Gas reactor (MHTGR), a pebble-bed High Temperature Gas Reactor (pb-HTGR), and a Fluoride-cooled High-temperature Reactor (FHR). We predicted a C-14 concentration of 4.3 Ci/m 3 for the MHTGR, 1.2 Ci/m 3 for the pebble bed HTGR, and 2.5 Ci/m 3 for the gFHR after 20 years of operation. The final C-14 concentration highly depended on the graphite nitrogen impurity, a major precursor for C-14. The C-14 concentration in all reactor types exceeded the 0.8 Ci/m3 threshold, resulting in a Class C waste classification. The costs associated with accepting the graphite after 20 years in a low-level waste disposal facility were projected to be 255 dollars per kWe for the MHTGR, 248 dollars per kWe for the pb-HTGR, and 56.8 dollars per kWe for the FHR.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Analogue stochastic gravity in strongly-interacting Bose–Einstein condensates

Collective modes propagating in a moving superfluid are known to satisfy wave equations in a curved space–time, with a metric determined by the underlying superflow. We use the Keldysh technique in a curved space–time to develop a quantum geometric theory of fluctuations in superfluid hydrodynamics. This theory relies on a “quantized” generalization of the two-fluid description of Landau and Khalatnikov, where the superfluid component is viewed as a quasi-classical field coupled to a normal component — the collective modes/phonons representing a quantum bath. This relates the problem in the hydrodynamic limit to the “quantum friction” problem of Caldeira–Leggett type. By integrating out the phonons, we derive stochastic Langevin equations describing a coupling between the superfluid component and phonons. These equations have the form of Euler equations with additional source terms expressed through a fluctuating stress–energy tensor of phonons. Conceptually, this result is similar to stochastic Einstein equations that arise in the theory of stochastic gravity. We formulate the fluctuation–dissipation theorem in this geometric language and discuss possible physical consequences of this theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Matter wave soliton solutions for driven Gross–Pitaevskii equation with distributed coefficients

Highlights: •Bright/dark matter wave soliton solutions are found for distributed coefficient driven GP equation. •Dynamics of solitons has been revealed for different type of experimentally realizable nonlinear interactions. •Effect of source term on the obtained soliton solutions has been shown. -- Abstract: We have obtained the matter wave soliton solution for the driven nonautonomous GP equation with quadratic–cubic nonlinearities. We have revealed their interesting dynamical features for the experimentally realizable form of nonlinear interactions. Additionally, we have described that by suitably choosing some system parameters, we can control their characteristics such as amplitude and width etc. We have found that our results/solutions are stable and can be applied for future applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solubility of U(VI) in chloride solutions. II. The stable oxides/hydroxides in alkaline KCl solutions: Thermodynamic description and relevance in cementitious systems

In this study, the solubility of U(VI) is investigated from undersaturation conditions in 0.1, 0.51, 1.03, 3.31 and 4.58 m KCl–KOH solutions at pHm = 7.5–14.6 (with pH m = –log [H + ] in molal units). All experiments were performed under Ar atmosphere at T = (22 ± 2)°C. XRD, quantitative chemical analysis, SEM–EDS and TG–DTA confirm that K 2 U 2 O 7 ·1.5H 2 O(cr) is the solid phase controlling the solubility in all evaluated systems at pH m ≥ 9.5. Below this pH m and with decreasing KCl concentration, the formation of sub-stoichiometric phases with K:U < 1 is indicated by XRD and solubility data. The concentration of uranium in equilibrium with K 2 U 2 O 7 ·1.5H 2 O(cr) shows a pH-independent behaviour up to pH m ≈ 11 regardless of ionic strength, whereas an increase of the solubility with a well–defined slope of +1 (log [U] vs. pH m ) is observed at pH m ≥11. These results are consistent with the predominance of UO 2 (OH) 3 – and UO 2 (OH) 4 2- species as previously reported in the literature. The combination of solubility data obtained in the present study with K 2 U 2 O 7 ·1.5H 2 O(cr) and the U(VI) hydrolysis scheme reported in Altmaier et al. (2017) yields a solubility product of log *K° s ,0{0.5K 2 U 2 O 7 ·1.5H 2 O(cr)} = (12.0 ± 0.2). SIT ion interaction coefficients for UO 2 (OH) 3 – and UO 2 (OH) 4 2- with K + are derived based on the newly generated experimental data in dilute to concentrated KCl systems and analogy with NaCl systems. This work extends the thermodynamic database available for U(VI) and allows more accurate source term calculations in the context of nuclear waste disposal under boundary conditions where significant K concentrations may be present and redox conditions lie in the stability field of U(VI). Finally, the K 2 U 2 O 7 ·1.5H 2 O(cr) solid phase can be considered to control the solubility of U(VI) in the degradation phase I of cement and cementitious materials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Impact of post-rainfall evaporation from porous roof tiles on building cooling load in subtropical China

Rainfall occurs frequently in subtropical regions of China, with the subsequent water evaporation from building roofs impacting the thermal performance and the energy consumption of buildings. In this paper, we proposed a novel simulation method using actual meteorological data to evaluate this impact. New features were developed in EnergyPlus to enable the simulation: (1) an evaporation latent heat flux source term was added to the heat balance equation of the external surface and (2) algorithms for the evaporative cooling module (ECM) were developed and implemented into EnergyPlus. The ECM experimental results showed good agreement with the simulated results. The ECM was used to assess the impact of evaporation from porous roof tiles on the cooling load of a one-floor building in subtropical China. The results show that the evaporation process decreased the maximal values of the external and internal roof surface temperatures by up to 6.4 °C and 3.2 °C, respectively, while the lower internal surface temperature decreased the room accumulated cooling load by up to 14.8% during the hot summer period. Lastly, the enhanced EnergyPlus capability can be used to evaluate the evaporative cooling performance of roofs with water-storage mediums, as well as to quantify their impact on building cooling loads.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Binding mechanisms of radionuclides to cement

Radionuclide solubility is one of the factors that can determine the 'source term' for potential migration to the far field. Hence, the mechanisms of immobilisation of radionuclides in cements need close study in order to quantify the nature of the binding. The nature of the binding forces in a cement matrix is very species sensitive, so it is difficult to produce a general description. This review summarises the main sorption mechanisms and then details immobilisation mechanisms for many elements.

36 MATERIALS SCIENCE↗

A simplified CFD approach for modeling mass transport in catalytic open-cell foams

A simplified macroscopic CFD approach is presented to model mass transport including chemical reactions in washcoated open-cell foams. The foam is treated as a porous medium. Species conversion during chemical reactions is modeled using appropriate source terms based on reaction rate expressions and modified to account for the mass transport resistances occurring at the fluid-washcoat interfaces and within the washcoat layers. As example, the catalytic CO oxidation over platinum is studied. The simulation results show good agreement with experimental data from literature. A parametric study on washcoat parameters, such as thickness, tortuosity, porosity, and size, is carried out. Increasing the washcoat thickness from 5 to 100 µm or decreasing the tortuosity to porosity ratio from 5 to 20 decreases the CO conversion by 10 %. The proposed model is found to be reliable and has the advantage of lower computational cost, making it a suitable tool for foam-based catalytic reactor design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and modeling studies of PR and ND oxalate solubility to high ionic strengths: Insight into actinide(III) oxalates

Actinide oxalates are chemical compounds important to nuclear industry, ranging from actinide separation in waste reprocessing, to production of specialty actinides, and to disposal of high level nuclear waste (HLW) and spent nuclear fuel (SNF). In this study, the solubility constants for Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O by performing solubility experiments in HNO 3 and mixtures of HNO 3 and H 2 C 2 O 4 at 23.0 ± 0.2 °C have been determined. The targeted starting materials, Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O, were successfully synthesized at room temperature using PrCl 3 , NdCl 3 and oxalic acid as the source metrials. Then, we utilized the targeted solubility-controlling phases to conduct solubility measurements. There was no phase change over the entire periods of experiments, demonstrating that Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O were the solubility-controlling phases in our respective experiments. Based on our experimental data, we have developed a thermodynamic model for Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O in the mixtures of HNO 3 and H 2 C 2 O 4 to high ionic strengths. The model for Pr 2 (C 2 O 4 ) 3 •10H 2 O reproduces well the reported experimental data for Pu 2 (C 2 O 4 ) 3 •10H 2 O, which are not utilized for the model development, demonstrating that Pr(III) is an excellent analog for Pu(III). Similarly, the model for Nd 2 (C 2 O 4 ) 3 •10H 2 O reproduces the solubility of Am 2 (C 2 O 4 ) 3 •10H 2 O and Cm 2 (C 2 O 4 ) 3 •10H 2 O. The Pitzer model was used for the calculation of activity coefficients. Based on the published, well established model for dissociation constants for oxalic acid and stability constants for actinide-oxalate complexes [i.e., AmC 2 O 4 + , and Am(C 2 O 4 ) 2 - ] to high ionic strengths, we have obtained the solubility constants (log 10 K 0 ) for the following reactions at 25 °C, Pr 2 (C 2 O 4 ) 3 •10H 2 O ⇌ 2Pr 3+ + 3C 2 O 4 2- + 10H 2 O(l). Nd 2 (C 2 O 4 ) 3 •10H 2 O ⇌ 2Nd 3+ + 3C 2 O 4 2- + 10H 2 O(l). to be -30.82 ± 0.30 (2σ), and - 31.14 ± 0.35 (2σ), respectively. These values for can be directly applied to Pu 2 (C 2 O 4 ) 3 •10H 2 O, Am 2 (C 2 O 4 ) 3 •10H 2 O and Cm 2 (C 2 O 4 ) 3 •10H 2 O. The model established for actinide oxalates by this study provides the needed knowledge with regard to solubilities of actinide/REE oxalates at various ionic strengths, and is expected to find applications in many fields, including the geological disposal of nuclear waste and the mobility of REE under the surface conditions, as Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O can be regarded as the pure Pr and Nd end-members of deveroite, a recently discovered natural REE oxalate with the following stoichiometry, (Ce 1.01 Nd 0.33 La 0.32 Pr 0.11 Y 0.11 Sm 0.01 Pb 0.04 U 0.03 Th 0.01 Ca 0.04 ) 2.01 (C 2 O 4 ) 2.99 •9.99H 2 O. Regarding its importance in the geological disposal of nuclear waste, Am 2 (C 2 O 4 ) 3 •10H 2 O/Pu 2 (C 2 O 4 ) 3 •10H 2 O/Cm 2 (C 2 O 4 ) 3 •10H 2 O can be the source-term phase for actinides, as demonstrated by the instance in the disposal in clay/shale formations. This is exemplified by the stability of Am 2 (C 2 O 4 ) 3 •10H 2 O in comparison with Am(OH) 3 (am), Am(OH) 3 (s) and AmCO 3 (OH)(s) under the relevant geological repository conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of experiments and data analysis challenges in calibration for forensics applications

Forensic science aims to infer characteristics of source terms using measured observables. Our focus is on statistical design of experiments and data analysis challenges arising in nuclear forensics. More specifically, we focus on inferring aspects of experimental conditions (of a process to produce product Pu oxide powder), such as temperature, nitric acid concentration, and Pu concentration, using measured features of the product Pu oxide powder. The measured features, Y, include trace chemical concentrations and particle morphology such as particle size and shape of the produced Pu oxide power particles. Making inferences about the nature of inputs X that were used to create nuclear materials having particular characteristics, Y, is an inverse problem. Therefore, statistical analysis can be used to identify the best set (or sets) of Xs for a new set of observed responses Y. One can fit a model (or models) such as Υ = f(Χ) + error , for each of the responses, based on a calibration experiment and then “invert” to solve for the best set of Xs for a new set of Ys. This perspectives paper uses archived experimental data to consider aspects of data collection and experiment design for the calibration data to maximize the quality of the predicted Ys in the forward models; that is, we assume that well-estimated forward models are effective in the inverse problem. In addition, we consider how to identify a best solution for the inferred X, and evaluate the quality of the result and its robustness to a variety of initial assumptions, and different correlation structures between the responses. In addition, we also briefly review recent advances in metrology issues related to characterizing particle morphology measurements used in the response vector, Y.

36 MATERIALS SCIENCE↗

Solution verification, goal-oriented adaptive methods for stochastic advection–diffusion problems

A goal-oriented analysis of linear, stochastic advection–diffusion models is presented which provides both a method for solution verification as well as a basis for improving results through adaptation of both the mesh and the way random variables are approximated. A class of model problems with random coefficients and source terms is cast in a variational setting. Specific quantities of interest are specified which are also random variables. A stochastic adjoint problem associated with the quantities of interest is formulated and a posteriori error estimates are derived. These are used to guide an adaptive algorithm which adjusts the sparse probabilistic grid so as to control the approximation error. Numerical examples are given to demonstrate the methodology for a specific model problem.

97 MATHEMATICS AND COMPUTING↗

Gaussian process regression constrained by boundary value problems

We develop a framework for Gaussian processes regression constrained by boundary value problems. The framework may be applied to infer the solution of a well-posed boundary value problem with a known second-order differential operator and boundary conditions, but for which only scattered observations of the source term are available. Scattered observations of the solution may also be used in the regression. The framework combines co-kriging with the linear transformation of a Gaussian process together with the use of kernels given by spectral expansions in eigenfunctions of the boundary value problem. Furthermore, it benefits from a reduced-rank property of covariance matrices. We demonstrate that the resulting framework yields more accurate and stable solution inference as compared to physics-informed Gaussian process regression without boundary condition constraints.

42 ENGINEERING↗

Reverse combustion: Kinetically controlled and mass transfer controlled conversion front structures

Under most conditions for reverse fixed bed combustion, transport effects of heat and gaseous species to and within fuel bed particles are important phenomena that limit the conversion rate. At present there is only one model that (1) claims to take transport limitations into account and (2) for which analytical solutions are given. Here, we present a numerical study of reverse combustion analysis on the basis of this model to show the effect of transport limitations on the reaction front structure and the consequences of these effects for the applicability and accuracy of the analytical solution procedure. A parameter set for coal combustion was used to perform the study. Results of numerical simulations indicate that the model solutions contain two limiting cases: kinetically controlled and mass-transfer-controlled conversion front structures. The kinetically controlled solutions consist of a preheat zone at the upstream side of the front and a thin reaction zone at the downstream side. The mass-transfer-controlled solutions consist of a wide reaction zone with a maximum source term situated at the upstream part of the front. The analytical solution to the model equations is shown to give correct predictions in the kinetically controlled case only. In the presence of mass transfer, the solution predicts the trend of decreasing front velocity with increasing transport limitations correctly but does not show the correct functional dependence on the parameter describing transport limitations. In addition, the predictions become highly inaccurate. This is related to the fact that the effect of transport limitations is not accounted for in the analytical solution method. Therefore, numerical methods should be used to obtain generally valid solutions. (author)

01 COAL, LIGNITE, AND PEAT↗

The effects of strain rate and curvature on surface density function transport in turbulent premixed methane-air and hydrogen-air flames: A comparative study

The effects of tangential strain rate and curvature on the surface density function (SDF) and on source terms within the SDF transport equation are studied for lean methane-air and hydrogen-air flames using two-dimensional direct numerical simulations with detailed chemistry. A positive correlation is observed between the SDF and the tangential strain rate, and this is explained in terms of the interaction between the local tangential strain rate and the dilatation rate due to heat release. Curvature is also seen to affect the SDF through the curvature response of both tangential strain rate and dilatation rate on a given flame isosurface. Strain rate and curvature are found to have an appreciable effect on several terms of the SDF transport equation. The SDF straining term in both methane and hydrogen flames is correlated positively with tangential strain rate, as expected, and is also correlated negatively with curvature. For methane flames, the SDF propagation term is found to correlate negatively with flame curvature toward the reactant side of the flame and positively toward the product side. By contrast, for hydrogen flames the SDF propagation term is negatively correlated with curvature throughout the flame brush. The variation of the SDF curvature term with local flame curvature for both methane and hydrogen flames is found to be nonlinear due to the additional stretch induced by the tangential diffusion component of the displacement speed. Physical explanations are provided for all of these effects, and the modeling implications are considered in detail. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗