Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Critical Evaluation and Thermodynamic Optimization of the Li{sub 2}O-Al{sub 2}O{sub 3} and Li{sub 2}O-MgO-Al{sub 2}O{sub 3} Systems

The thermodynamic and phase diagram data of the Li{sub 2}O-Al{sub 2}O{sub 3} and Li{sub 2}O-MgO-Al{sub 2}O{sub 3} systems were critically evaluated and optimized to obtain a set of consistent Gibbs energy functions for all phases in the systems. The LiAl{sub 5}O{sub 8}-MgAl{sub 2}O{sub 4} spinel solid solution was modeled with the two-sublattice compound energy formalism by considering the cation distribution between the tetrahedral and octahedral sites and excess vacancy in octahedral sites. The liquid phase and monoxide solid solution were also described using the modified quasichemical model with pair approximation and the Bragg–Williams random mixing model, respectively. The thermodynamic models with optimized model parameters enable the reproduction of all reliable thermodynamic and phase diagram as well as spinel structural data in the system.

36 MATERIALS SCIENCE↗

The anion exchange properties of AFm (hydrocalumite-group) minerals defined from solubility experiments and crystallographic information

Solubility experiments with binary series of OH-, Cl-, SO{sub 4}- and CO{sub 3}-AFm were re-examined with a non-ideal, multicomponent solid solution model. The electrical double layer on the mineral's outer surface, which neutralizes about 5% of the anionic charge, can be included. The choice of the end-members in the solid solution and the reaction formulation can help to eliminate the ‘non-ideality’ for OH-SO{sub 4} and Cl-OH exchange. CO{sub 3}-Cl-OH exchange is not ideal in the solubility experiments, nor can it be, because the mineral volume is not a linear combination of the end-members. The solubilities of the end-members are related to the anion charge and inversely to the anion-layer thickness. OH is part of the anion-charge, even when a pure, other anion form is the target of the synthesis. Pure OH-AFm is unstable and converts into hydrogarnet and portlandite, depending on the precipitation rate of hydrogarnet.

36 MATERIALS SCIENCE↗

Structural, magnetic, and electrochemical properties of LiMn{sub 1−x}Ni{sub x}PO{sub 4}

Highlights: • LiMn{sub 1−x}Ni{sub x}PO{sub 4} nanomaterials were synthesised via a hydrothermal route up to x = 0.45. • Structure and elemental analyses show solid solution behaviour obeying Vegard's law. • Magnetic properties reflect the substitution of Mn{sup 2+} by Ni{sup 2+}. • Mn{sup 2+/3+} reduction potential rises with increasing nickel concentration. - Abstract: A solid solutions series of LiMn{sub 1−x}Ni{sub x}PO{sub 4} nanomaterials with 0 ≤ x ≤ 0.45 was produced by a low-temperature microwave-assisted hydrothermal process. The materials have been systematically studied regarding structure, morphology, magnetism, and electrochemical properties. The lattice parameters in the orthorhombic olivine structure obey Vegard's law and linearly depend on x. Similarly, the static magnetisation reflects the decrease of the transition metal paramagnetic moment upon substitution of Mn{sup 2+} by Ni{sup 2+}. At low temperatures, antiferromagnetic long range order appears for all Ni-concentrations. The potential of the Mn{sup 2+/3+} redox couple is found to linearly increase with x. This is explained by a larger electronegativity of Ni{sup 2+} as compared to Mn{sup 2+} and associated changes in the covalency of the Mn-O bond.

36 MATERIALS SCIENCE↗

Precipitation in a Cu–Cr–Zr–Mg alloy during aging

The precipitation processes in a Cu-0.69Cr-0.10Zr-0.02Mg alloy aged at 450 °C and 550 °C have been investigated by transmission electron microscopy and high resolution transmission electron microscopy. The precipitation sequence in this alloy aged at 450 °C is: supersaturated solid solution → Guinier–Preston zone (fcc Cr-rich phase) → ordered fcc Cr-rich phase → ordered bcc Cr-rich phase. The precipitation sequence in this alloy aged at 550 °C is: supersaturated solid solution → ordered fcc Cr-rich phase → ordered bcc Cr-rich phase. In the evolution of decomposition, the orientation relationship between the precipitates and the Cu matrix changes from cube-on-cube to Nishiyama–Wassermann orientation. The ordering of Cr-rich precipitates facilitates the formation of the bcc precipitates and promotes the development of Nishiyama–Wassermann orientation. - Highlights: • Two different precipitation sequences in the Cu–Cr–Zr–Mg alloy are proposed. • The changes in orientation relationship of the precipitates are presented. • The roles of ordering and coherent interface of the precipitates are discussed.

36 MATERIALS SCIENCE↗

Reactive flash sintering of TiZrN and TiAlN ternary metal nitrides

Here, this study demonstrated the reactive flash sintering (RFS) for two powder mixtures: TiN-ZrN (both conducting) and AlN-TiN (TiN conducting but AlN insulating), targeting ternary metal nitrides (TMN) of Ti 0.5 Zr 0.5 N and Ti 0.5 Al 0.5 N, respectively. A constant volage and pressure (e.g., 8 V DC, ∼15 MPa) at room temperature triggered the flash (current density up to 27 A/mm 2 ) without pre-heating, and the entire RFS process finished in a few minutes. For TiZrN, the flash was instantaneous whereas for TiAlN, there was a long incubation before the flash followed by a quick and dramatic flash. Both conventional ex situ XRD and in situ synchrotron study had been carried out. They showed a uniform Ti 0.57 Zr 0.43 N solution formed in RFS and persisted upon cooling, while (Ti, Al) N solid solution formed at high temperature was not stable and likely went through a very quick phase separation in the cooling process. The final products from RFS had been characterized using SEM/EDS for microstructure. Both TiZrN and TiAlN were dense. Distribution of Ti, Zr, and N was uniform for TiZrN; for TiAlN, Ti and N distribution was uniform, while association of Al with oxygen was observed. TGA-DSC revealed the onset oxidation temperature for TiZrN was comparable to TiN and ZrN, while it was higher by ∼200 °C for TiAlN, likely due to the formation of Al 2 O 3 . In terms of mechanical properties such as hardness or fracture toughness, forming a single-phase solid solution (like TiZrN) does not offer obvious benefits. while large grain size from RFS seemed to be unfavorable. Future optimization of RFS condition and in-depth study by both experiments and simulation are needed to fully understand the composition-processing-structure-property relationships for such TMN from the reactive flash sintering process.

Flash Sintering↗

Change in the Magnetocapacity in the Paramagnetic Region in a Cation-Substituted Manganese Selenide

The capacity and the dielectric loss tangent of a Gd{sub x}Mn{sub 1–x}Se (x ≤ 0.2) solid solution have been measured in the frequency range 1–300 kHz without a magnetic field and in a magnetic field of 8 kOe in the temperature range 100–450 K, and the magnetic moment of the solid solution has been measured in a field of 8.6 kOe. The magnetocapacity effect and the change in the magnetocapacity sign have been observed in room temperature in the paramagnetic region. A correlation of the changes in the dielectric permittivity and the magnetic susceptibility with temperature has been revealed. The magnetocapacity is described using the model with orbital electron ordering and the Maxwell–Wagner model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase relationships and crystallography of annealed alloys in the Ce5Si4-Ce5Ge4 pseudobinary system

The phase relationships of annealed alloys in the Ce{sub 5}Si{sub 4-x}Ge{sub x} system were determined by X-ray powder diffraction (XRD). Two structurally distinct terminal phase regions were observed in this system: the Ce{sub 5}Si{sub 4}-based solid solution (0 {le} x < 2.85) crystallizing in the Zr{sub 5}Si{sub 4}-type tetragonal structure with space group P4{sub 1}2{sub 1}2, and the Ce{sub 5}Ge{sub 4}-based solid solution (3.35 < x {le} 4) crystallizing in the Sm{sub 5}Ge{sub 4}-type orthorhombic structure with space group Pnma. An intermediate phase, which has a narrow composition range with the monoclinic Gd{sub 5}Si{sub 2}Ge{sub 2}-type structure, space group P112{sub 1}/a, was found to exist at x = 2.95 {+-} 0.05. The Rietveld powder diffraction profile fitting technique was used to refine the crystal structures, lattice parameters, and the atomic positions. The phase relationships of the Ce{sub 5}Si{sub 4-x}Ge{sub x} pseudobinary system after heat treatment were established from these data.

36 MATERIALS SCIENCE↗

Geochemical modeling of leaching of Ca, Mg, Al, and Pb from cementitious waste forms

Results from extraction tests on cement-waste samples were simulated with a thermodynamic equilibrium model using a consistent database, to which lead data were added. Subsequent diffusion tests were modeled by means of a 3D diffusive transport model combined with the geochemical model derived from the extraction tests. Modeling results of the leached major element concentrations for both uncarbonated and (partially) carbonated samples agreed well with the extraction test using the set of pure minerals and solid solutions present in the database. The observed decrease in Ca leaching with increasing carbonation level was qualitatively predicted. Simulations also revealed that Pb leaching is not controlled by dissolution/precipitation only. The addition of the calcite-cerrusite solid solution and adsorption reactions on amorphous Fe- and Al-oxides improved the predictions and are considered to control the Pb leaching during the extractions tests. The dynamic diffusive leaching tests were appropriately modeled for Na, K, Ca and Pb.

36 MATERIALS SCIENCE↗

Magnetic and structural properties of nanostructured Fe–20Al–2Cr powder mixtures

Nanostructured Fe–20Al–2Cr (wt.%) powders have been prepared using high energy planetary ball-mill. Changes in structural, morphological and magnetic properties of the powders during mechanical alloying (MA) and during subsequent annealing have been examined by X-ray diffraction, scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). The observed structural and microstructural changes have been related to several processes occurring during MA. After MA, the material becomes significantly disordered and refines to nanoscale grain sizes (~ 14 nm). The obtained bcc α-Fe(Al,Cr) solid solution shows a ferromagnetic behavior. Upon subsequent annealing at 400 °C, α-Fe{sub 2}O{sub 3} and spinel oxides are formed at the surface of particles, while structural defects disappeared as Fe(Al,Cr) solid solution becomes more ordered and grain growth occurs. The saturation magnetization (Ms) shows lower values after annealing, attributed to the formation of metal oxides with low magnetic moment. - Graphical abstract: Display Omitted - Highlights: • Nanostructured Fe–Al–Cr powders were prepared by MA. • Careful analysis of the XRD patterns by using the Rietveld refinement • The lattice distortion is evidenced by the increase of both the lattice parameter and the static Debye Waller parameter. • Annealing at 400 °C stabilizes the microstructure at the nanometer range and leads to the formation of Fe{sub 3}O{sub 4} and Fe{sub 2}O{sub 3} oxides. • Both the milled and annealed samples are ferromagnetic.

36 MATERIALS SCIENCE↗

Invar effect and noncollinear magnetism in FeCu alloys

The Invar effect has been observed in many Fe rich alloys, most famously Ni Invar. Generally the Invar behavior is associated with the strong coupling between the lattice and magnetic degrees of freedom, and therefore depends on the magnetic ordering in these alloys. Recent experimental works observed an Invar effect in fcc-FeCu solid solutions. In the present paper the magnetic states of fcc-FeCu solid solutions for various concentrations are investigated. The first principles calculations employ the locally self-consistent multiple scattering real space method for solving the local-density approximation Kohn–Sham equation to investigate the noncollinear ordering of magnetic moments. Here, the magnetic order for the low iron concentration is found to be noncollinear, spin glasslike, and the ferromagnetic order is not stable, whereas for the iron rich alloys for the ground state equilibrium lattice constants a magnetic order with parallel aligned Fe moments is stable. In this configuration the induced moments at the Cu sites order nontrivially on a cone with an opening of approximately 40° around the Fe moment direction.

36 MATERIALS SCIENCE↗

Synthesis and Photonic Sintering of Proton Conducting Lanthanide Nickelates

Lanthanide nickelate perovskites are known proton conductors at intermediate temperatures (350-600°C). They are attractive targets for proton conducting fuel cells and electrolyzers due to their operational temperature range and their stability in the presence of CO 2 . These materials have the formula LNiO 3 , with the lanthanide L = La, Ce, Pr, Nd, or Sm. Sintering is challenging due to phase transformations that occur at lower temperatures than those required for sintering. In this project, a series of lanthanide nickelate perovskites was synthesized via both a precursor solid solution method and the glycine nitrate process. Powders derived from the precursor solid solution method for LaNiO 3 and NdNiO 3 were sintered at Utility Global Inc. at various temperatures utilizing fast photonic sintering. LaNiO 3 was successfully sintered while maintaining the perovskite phase. NdNiO 3 underwent a phase transformation at all the conditions tested. The stability of the perovskite phase decreases moving right across the lanthanides in the periodic table, while the expected proton conductivity increases. These results will inform further investigations into lanthanide nickelate perovskites toward the goal of producing a free-standing, sintered, proton-conducting membrane.

36 MATERIALS SCIENCE↗

Control on the homogeneity and crystallinity of Zn0.5Cd0.5S nanocomposite by different reaction conditions with high photocatalytic activity for hydrogen production from water

Highlights: • The effects of the various reaction conditions are investigated. • Different photocatalytic activities attributed to the different homogeneity and crystallinity of the nanoparticles. • Combination of good crystallinityand homogeneityresulted in an excellent photocatalytic activity. - Abstract: Zn{sub 0.5}Cd{sub 0.5}S nanoparticles with phase homojunctions were prepared by a one-step hydrothermal method with thioacetamide as sulfur source. The effects of the various reaction conditions, such as initial concentrations of Zn and Cd ions, initial content of sulfur source in the reaction mixture, and the temperature rising rate, are investigated. The photocatalytic activities for H{sub 2} evolution from water in the presence of sacrificial reagents of these Zn{sub 0.5}Cd{sub 0.5}S nanoparticles were significantly affected by the reaction conditions. These differences on the photocatalytic activities can be attributed to the different homogeneity and crystallinity of the nanoparticles prepared at different reaction conditions. A faster reaction rate leads to the formation of Zn{sub 0.5}Cd{sub 0.5}S nanoparticles with bad crystallinity, but good homogeneity. On the contrary, a slow reaction rate results in a bad homogeneity, but better crystallinity. Combination of good crystallinity and homogeneity in a Zn{sub 0.5}Cd{sub 0.5}S nanocomposite resulted in an excellent photocatalytic activity. The highest rate of H{sub 2} evolution achieved for these phase-homojunctions materials under visible-light irradiation (λ ≥ 420 nm) reached 1252.7 μmol h{sup −1} with an apparent quantum efficiency of 21.46% at 420 nm. The H{sub 2} evolution rate did not reduce distinctively in a continuous 15 hour test for H{sub 2} evolution, indicating an excellent stability for this material. This work not only demonstrates a facile method to produce highly active phase-homojunctions containing Zn{sub 0.5}Cd{sub 0.5}S solid solutions for photocatalytic hydrogen production from the perspective of controlling various reaction conditions, but also provides new insights into understanding the importance of the homogeneity and crystallinity for enhancing photocatalytic activity and stability of Zn{sub 0.5}Cd{sub 0.5}S solid solutions. It is expected that the strategies of modifying the homogeneity and crystallinity by controlling various reaction conditions can be extracted and used when designing other efficient and robust photocatalysts in the future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructural, Magnetic, and Nanoindentation Studies of the Ball-Milled Ti80Ni20 Alloy

Nanostructured Ti{sub 80}Ni{sub 20} material was elaborated by mechanical alloying from pure Ti and Ni powders in a planetary ball-mill P7 under argon atmosphere at ambient temperature. Morphological, microstructural, magnetic, and nanoindentation properties were studied using scanning electron microscopy, X-ray diffraction, magnetic measurements, and nanoindentation test. The morphological observations show the predominance of the welding phenomenon during the milling process. The Rietveld refinement of the X-ray diffraction pattern reveals, after 4 h of milling, the formation of the disordered hcp-Ti (Ni) solid solution in addition to elemental hcp-Ti and fcc-Ni. On further milling (20 h), the interdiffusion between Ti and Ni atoms is evidenced by the formation of disordered hcp-Ti (Ni) and fcc-Ni (Ti) solid solutions. The saturation magnetization and coercivity values are about of 159.8 emu/g and 80.79 Oe, respectively, after 20 h of milling. M{sub r}/M{sub s} ratio indicates the existence of small magnetic particles which are typically single domains (M{sub r}/M{sub s} 0.1–0.5) and/or multidomain (M{sub r}/M{sub s} < 0.1). Nanohardness values of the sintered powders fluctuates between 1.53 and 5.98 GPa while those of the elastic modulus varies in the range 130.73 to 164.53 GPa.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

AB INITIO STUDY OF ADVANCED METALLIC NUCLEAR FUELS FOR FAST BREEDER REACTORS

Density-functional formalism is applied to study the ground state properties of {gamma}-U-Zr and {gamma}-U-Mo solid solutions. Calculated heats of formation are compared with CALPHAD assessments. We discuss how the heat of formation in both alloys correlates with the charge transfer between the alloy components. The decomposition curves for {gamma}-based U-Zr and U-Mo solid solutions are derived from Ising-type Monte Carlo simulations. We explore the idea of stabilization of the {delta}-UZr{sub 2} compound against the {alpha}-Zr (hcp) structure due to increase of Zr d-band occupancy by the addition of U to Zr. We discuss how the specific behavior of the electronic density of states in the vicinity of the Fermi level promotes the stabilization of the U{sub 2}Mo compound. The mechanism of possible Am redistribution in the U-Zr and U-Mo fuels is also discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Structural, chemical and optical evaluation of Cu-doped ZnO nanoparticles synthesized by an aqueous solution method

Highlights: • Cu-doped ZnO nanoparticles obtained by chemical synthesis. • Substitutional or interstitial Cu into ZnO lead specific structural, chemical, and optical changes. • Incorporation efficiency of Cu atoms in ZnO as a function of the Cu concentration in the precursor dissolution. - Abstract: In this work a study of ZnO and Cu-doped ZnO nanoparticles obtained by chemical synthesis in aqueous media was carried out. Structural analysis gave the dominant presence of wurtzite ZnO phase forming a solid solution Zn{sub 1−x}Cu{sub x}O. For high Cu doping CuO phase is also present. For low Cu concentration the lattice shrinks due to Cu atoms substitute Zn atoms. For high Cu concentration the lattice enlarges due to predominance of interstitial Cu. From elemental analysis we determined and analyzed the incorporation efficiency of Cu atoms in Zn{sub 1−x}Cu{sub x}O as a function of the Cu concentration in the precursor dissolution. Combining structural and chemical results we described the Cu/Zn precursor concentrations r{sub w} in which the solid solution of Cu in ZnO is predominant. In the region located at r{sub w} ≈ 0.2–0.3 it is no longer valid. For Cu/Zn precursor concentration r{sub w} > 0.3 interstitial Cu dominates, and some amount of copper oxide appears. As the Cu concentration increases, the effective size of nanoparticles decreases. Photoluminescence (PL) measurements of the Cu-doped ZnO nanoparticles were carried out and analyzed.

36 MATERIALS SCIENCE↗

Phase Formation and Electronic Structure Peculiarities in the Al{sub 1–} {sub x}Si{sub x} Film Composites under the Conditions of Magnetron and Ion-Beam Sputtering

The peculiarities of the phase composition and electronic structure of aluminum–silicon composite films near the Al{sub 0.75}Si{sub 0.25} composition obtained by the magnetron and ion-beam sputtering methods on a Si(100) silicon substrate are studied using the X-ray diffraction techniques and ultrasoft X-ray emission spectroscopy. In addition to silicon nanocrystals of about 25 nm in size, an ordered solid solution corresponding to the previously unknown Al{sub 3}Si phase is formed in magnetron sputtering on a polycrystalline Al matrix. Films obtained by ion-beam sputtering of the composite target are found to be monophasic and contained only one phase of an ordered solid solution of aluminum silicide Al{sub 3}Si of the Pm3m cubic system with the primitive cell parameter a = 4.085 Å. However, subsequent pulsed photon annealing of the composite with different radiation doses from 145 to 216 J/cm{sup 2} gives rise to the partial decomposition of the Al{sub 3}Si phase with the formation of free metallic aluminum and silicon nanocrystals with sizes in the range from 50 to 100 nm, depending on the pulsed photon radiation dose.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗