SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We consider dynamics of scalar and vector fields on gravitational backgrounds of the Wess-Zumino-Witten models. For SO(4) and its cosets, we demonstrate full separation of variables for all fields and find a close analogy with a similar separation of vector equations in the backgrounds of the Myers-Perry black holes. For SO(5) and higher groups separation of variables is found only in some subsectors.
This research demonstrates two methods of quantifying isotope separation efficiency using an inductively coupled plasma mass spectrometer. One method measured the accumulated charge on a conductive collection substrate in real-time while the second method performed a chemical dissolution of the substrate with subsequent post-processing and analysis. Our previous results demonstrated and compared these methods with a multi-element standard of stable isotopes. This research applies these methods to quantifying radioactive isotopes utilizing measurements of the stable isotope at the same mass-to-charge ratio. The mass-separated radioactive isotope were fission products produced from thermal neutron irradiation of a highly enriched 235U foil. The two methods are explained and the results of this new separation methodology are compared to available cumulative fission yields.
Here, although methods for the chemical separation of samarium from a rock matrix are well established, chemical separation of samarium from non-natural isotopic impurities for the purpose of 146 Sm half-life measurement requires modifications to these procedures, as well as additional checks for effective separation. This work describes the chemical purification procedures associated with the 146 Sm source and the results from gamma spectroscopy. The purification procedure allowed for the quantitative determination of the number of 146Sm atoms using a modified isotope dilution technique. Alpha-decay counting of the sample will be applied in the future to determine the half-life of 146 Sm.
Scandium-47 ( 47 Sc) production via bremsstrahlung irradiation of natural vanadium targets offers significant advantages for producing high purity 47 Sc; this work evaluates several rapid dissolution and chemical separation techniques for recovering high purity 47 Sc from irradiated vanadium. Here, techniques developed are combined into a simple, gram-scale, semi-automated target processing system that enables 47 Sc recovery from irradiated vanadium targets with chemical yields as high as 93 ± 3% and 47 Sc/V separation factors of 6 ± 3 ·10 11 within 90 min total processing times. Future research into H 2 O 2 resistant separation techniques and their applicability for direct process coupling to chelation are recommended.
A procedure for the separation of technetium isotopes from bulk molybdenum was developed in nitric acid media. After irradiation of nat Mo foils, and dissolution in H 2 O 2 , the solution is acidified to 2 M HNO 3 , and anion exchange resin is used to separate technetium from molybdenum. The procedure is simple, requiring only basic laboratory equipment and, with a two-column separation, the technetium yield is high (~ 85%) with extremely high purity (< 0.1 ppm nat Mo). In conclusion, this is ideally suited for laboratory production of technetium tracer isotopes, particularly 95m Tc.
Steelmaking slag contains considerable amount of manganese (Mn) and phosphorus (P), and recycling them is an important issue. Since Mn is an alloy added to enhance the steel quality, while P is a harmful impurity in the steel product, they need to be separated for recycling. We have already found the possibility of separating Mn and P from steelmaking slag by selectively reducing P{sub 2}O{sub 5} and FeO while suppressing the reduction of MnO. As a fundamental study for the selective reduction of P from steelmaking slag, in this study, we vary the slag basicity, graphite mixing ratio, temperature, and crucible type to find the optimum condition. Artificial steelmaking slag with various compositions is synthesized and mixed with graphite powder in an Al{sub 2}O{sub 3} or a MgO crucible. The reduction is conducted at 1673 K, 1773 K, and 1873 K for 20 to 80 minutes. As a result, carbon saturated metal is formed from the slag, and the reduced metal and slag were separated easily. We find that a decrease in slag basicity suppressed the reduction rate of Mn while enhancing that of P. The activation energy for the reduction rate constant of P is found to be close to that of the diffusion of P in slag.
Steroids represent an interesting class of small biomolecules due to their use as biomarkers and their status as scheduled drugs. Although the analysis of steroids is complicated by the potential for many isomers, ion mobility spectrometry (IMS) has previously shown promise for the rapid separation of steroid isomers. This work is aimed at the further development of IMS separation for the analysis of steroids. Here, traveling wave ion mobility spectrometry (TWIMS) was applied to the study of group I metal adducted steroids and their corresponding multimers for five sets of isomers. Each set of isomers had a minimum of one dimeric metal ion adduct that exhibited a resolution greater than one (i.e., approaching baseline resolution). Additionally, ion-neutral collision cross sections (CCSs) were measured using polyalanine as a calibrant, which may provide an additional metric contributing to analyte identification. Where possible, measured CCSs were compared to previously reported values. When measuring CCSs of steroid isomers using polyalanine as the calibrant, nitrogen CCS values were within 1.0% error for monomeric sodiated adducts and slightly higher for the dimeric sodiated adducts. Overall, TWIMS was found to successfully separate steroids as dimeric adducts of group I metals. .
Previous ion mobility (IM) studies have demonstrated that varying the drift gas composition can be used to enhance chemical selectivity and resolution, yet there are few drift gas studies aimed at achieving quantitatively reproducible mobility measurements. Here, we critically evaluate the conditions necessary to achieve reproducible collision cross section (CCS) measurements in pure drift gases (helium, nitrogen, argon, and carbon dioxide) using a commercial uniform field drift tube instrument. Optimal experimental parameters are assessed based on the convergence of CCS measurements to reproducible values which are compared with literature values. A suite of calibration standards with diverse masses, biological classes, and charge states are examined to assess chemical selectivity and resolution achievable in each drift gas. Results indicate nitrogen and argon perform similarly and are sufficient for most applications where high resolving power and high peak capacity are desired. Carbon dioxide exhibits more selectivity for resolving structurally heterogeneous compounds, which may be preferable in specific analyte pair separations. Helium demonstrated modest separation capabilities but has utility for comparison to theoretical values and previously published work. In drift gases other than nitrogen, pressure differentials up to 230 mTorr between the drift tube and upstream chamber were optimal for improving correlation to literature values, while in nitrogen, the recommended pressure differential of 150 mTorr was found appropriate. We present recommended experimental parameters as well as gas-specific CCS measurements for structurally homogeneous sets of analytes which are suitable for use by other laboratories as standards for purposes of instrument calibration and overall assessment of IM separation performance. .
Highlights: • A new method for constructing D-dimensional minimally superintegrable systems. • Superintegrable systems from block coordinate separation of variables. • Unified derivation of quadratic symmetry algebras via gauge transformations. - Abstract: We present a new method for constructing D-dimensional minimally superintegrable systems based on block coordinate separation of variables. We give two new families of superintegrable systems with N (N≤D) singular terms of the partitioned coordinates and involving arbitrary functions. These Hamiltonians generalize the singular oscillator and Coulomb systems. We derive their exact energy spectra via separation of variables. We also obtain the quadratic algebras satisfied by the integrals of motion of these models. We show how the quadratic symmetry algebras can be constructed by novel application of the gauge transformations from those of the non-partitioned cases. We demonstrate that these quadratic algebraic structures display a universal nature to the extent that their forms are independent of the functions in the singular potentials.
High variabilities of material attributes in lignocellulosic biomass present risks for biofuel and biochemical productions and must be mitigated via preprocessing. Since almost no mechanical device is originally designed for processing biomass, how to operate existing apparatuses with efficient performance has not been investigated extensively. This work presents a study on an integrated screening and air classification to separate cobs and stalks from husks and leaves in corn stover. Prototype machine learning models were developed to assess the feasibility of predicting the process outcome based on the measurable parameters. The models trained upon limited experimental data rendered decent predictive accuracy of yield and purity. The experimental data and modeling results collectively suggest decreasing throughput leads to a higher purity. To the contrary, if throughput increases, a lower purity is likely. A possible trade-off between yield and purity of the separated streams indicates the need for optimal combinations of feedstock size, moisture, and throughput to achieve optimized separations. The results of this study also suggest the need to further improve model predictability by developing more accurate formulations for physics governing the integrated unit operations. To accomplish this, additional experimental data needs to be generated for model training.
Insufficient charge separation and feeble CO 2 activation limit the CO 2 photoreduction efficiency. It is highly desirable to consciously construct organic–inorganic hybrid composites to simultaneously accelerate charge separation and provide favorable active sites. Herein, a defect-induced interfacial Bi-O bridge bond is constructed by grafting terminal O of cobalt porphyrin (Co-TCPP) with Bi 3 O4Br. Systematic investigations reveal that the Bi-O bridge bond as the charge migration bridge accelerates the extraction and transfer of electron from the external [Bi 3 O 4 ] layers to Co-TCPP, and the millisecond separation lifetime of electrons on Co-TCPP can be achieved. Co atoms as the active sites optimized the CO 2 adsorption and activation, thus promoting the formation of COOH*. As a result, the CO 2 photoreduction rate of 0.5% Co-TCPP/Bi 3 O4Br reaches 71.3 μmol g -1 h -1 in pure water, 2.53-fold of that on the pristine Bi 3 O4Br. This work provides atomistic insights and strategies for the construction of new organic–inorganic hybrid materials for artificial photosynthesis and CO 2 photoreduction.
Here, to assess whether the trihexyl(tetradecyl)phosphonium chloride ([P 66614 + ][Cl - ]) ionic liquid (IL), employed as a gas chromatographic stationary phase, exhibits temperature-dependent phase transitions or structural heterogeneity, retention thermodynamics for probe molecules of varied chemical structure were investigated by gas chromatography (GC) over the temperature range of 25 to 64 °C using van’t Hoff analysis. All van’t Hoff plots for n-alkanes (C8–C12) and other probe analytes were linear, indicating the absence of detectable phase-transition behavior. The [P 66614 + ][Cl - ] IL was further compared with the [P 66614 + ] bis[(trifluoromethyl)sulfonyl]imide ([P 66614 + ][NTf 2 - ]) IL and commercial polysiloxane stationary phases in terms of temperature-dependent resolution behavior and chromatographic selectivity over the temperature range of 28–52 °C. The resolution factors of analytes in mixtures obtained using gas chromatography–mass spectrometry (GC–MS) and the summation of resolution values decreased smoothly with temperature on both IL stationary phases and on the dimethylphenylcyano-substituted polymeric stationary phase (OV-1701), whereas the poly(50% diphenyl/50% dimethyl siloxane) stationary phase (SPB-50) exhibited irregularities in its temperature-dependent summation of resolution profile, showing a distinct maximum in the temperature range of 34–40 °C. Selectivity values for the IL stationary phases were largely determined by the anion, with the [P 66614 + ][Cl - ] IL providing enhanced separation between polar and aromatic analytes, while the [P 66614 + ][NTf 2 - ] IL favored dispersive and π-π interactions that resulted in a reversal of elution order for some aliphatic–aromatic and alkyne-containing analyte pairs. Capillary columns prepared using different surface activation methods and coated with identical [P 66614 + ][Cl - ] IL stationary phase showed indistinguishable temperature-dependent trends in summation of resolution value and selectivity. An evaluation of analyte-specific selectivity provides insight into the characteristic separation behavior of the stationary phases and enables identification of analyte classes that are more efficiently separated on the [P 66614 + ]-based IL stationary phases compared to conventional stationary phase materials.
Liquid–liquid phase separation of intrinsically disordered proteins (IDPs) and other biomolecules is a highly complex but robust process used by living systems. Drawing inspiration from biology, phase separating proteins have been successfully utilized for promising applications in fields of materials design and drug delivery. These protein-based materials are advantageous due to the ability to finely tune their stimulus-responsive phase behavior and material properties, and the ability to encode biologically active motifs directly into the sequence. The number of possible protein sequences is virtually endless, which makes sequence-based design a rather daunting task, but also attractive due to the amount of control coming from exploration of this variable space. The use of computational methods in this field of research have come to the aid in several aspects, including interpreting experimental results, identifying important structural features and molecular mechanisms capable of explaining the phase behavior, and ultimately providing predictive frameworks for rational design of protein sequences. We provide an overview of computational studies focused on phase separating biomolecules and the tools that are available to researchers interested in this topic.
Hydrometallurgical recycling of spent lithium-ion batteries is among the most promising recovery approaches. The current hydrometallurgical method for battery recycling faces challenges such as complex separation and precipitation processes, and environmental concerns from the use of caustic inorganic acid and hazardous hydrogen peroxide. Our proposed modified method, namely polyol-metallurgy, uses citric acid in ethylene glycol as dual-function green solution to overcome these obstacles. This bifunctional solution leaches valuable metal ions from cathode materials (e.g., LiCoO 2 ), and then acts as chelating agents to selectively precipitate cobalt through an esterification reaction, without the need for additional precipitation agents. The leaching efficiency of cobalt and lithium reaches 99.55% and 97.65%, respectively, and more than 96% of cobalt could be directly self-precipitated and recovered. Further, the unique characteristics of the dual-function solution also avoids impurities from Al foils and PVDF/carbon black films, enabling the simple separation process. Therefore, the process can be completed in one-pot system with efficient leaching, separation and coprecipitation, making it more efficient and feasible for operation than existing alternatives.
Highlights: • Bi{sub 2}WO{sub 6} nanosheets were grown on ZnFe{sub 2}O{sub 4} nanofibers by a hydrothermal method. • The Bi{sub 2}WO{sub 6}/ZnFe{sub 2}O{sub 4} heterostructures nanofibers showed high photodegredation of RhB under visible-light. • The Bi{sub 2}WO{sub 6}/ZnFe{sub 2}O{sub 4} heterostructures nanofibers possessed magnetically separable property. - Abstract: Bi{sub 2}WO{sub 6} nanosheets were uniformly grown on electrospun ZnFe{sub 2}O{sub 4} nanofibers via a solvothermal technique. The loading amounts of Bi{sub 2}WO{sub 6} in the Bi{sub 2}WO{sub 6}/ZnFe{sub 2}O{sub 4} heterostructures nanofibers could be controlled by adjusting the precursor concentration in solvothermal process. Under visible-light irradiation, the degradation rate constant (rhodamine B) of the Bi{sub 2}WO{sub 6}/ZnFe{sub 2}O{sub 4} heterostructures was 11.6 times than that of pure ZnFe{sub 2}O{sub 4} nanofibers and 5.8 times than that of pure Bi{sub 2}WO{sub 6} nanosheets, mainly owing to the effective separation of the photogenerated electron-hole pairs in the Bi{sub 2}WO{sub 6}/ZnFe{sub 2}O{sub 4} heterostructures. Notably, the Bi{sub 2}WO{sub 6}/ZnFe{sub 2}O{sub 4} heterostructures nanofibers could be easily separated from the solution under an external magnetic field by employing the ferromagnetic behaviors of ZnFe{sub 2}O{sub 4}. After several cycles, the photocatalytic activity of the Bi{sub 2}WO{sub 6}/ZnFe{sub 2}O{sub 4} heterostructures nanofibers did not decrease significantly suggesting that the Bi{sub 2}WO{sub 6}/ZnFe{sub 2}O{sub 4} heterostructures possess stable characteristics. This kind of Bi{sub 2}WO{sub 6}/ZnFe{sub 2}O{sub 4} heterostructures nanofibers with high visible-light photocatalytic activity, excellent stability and excellent recyclability could be significance in environmental application.
Halide ion phase separation is a barrier to the application of mixed-halide perovskites, whereby the presence of large populations of photo-generated or injected carriers causes undesirable changes in the local band gap. Here, we investigate the mechanism of phase separation in CsPbI x Br 3-x perovskite single crystals driven by light. The phase separation process and its dynamics are visualized at the nanometer scale at cryogenic temperatures using in-situ scanning transmission electron microscopy and cathodoluminescence. Combined with phase field modeling that accounts for the coupling between electronic and chemical driving forces, our observations point to a spinodal decomposition mechanism in which both the amplitude of composition fluctuation and the characteristic length scale grow non-linearly with time. Our findings provide microscopic insights that can assist in further engineering mixed-halide perovskites either for stability or for intentional programming of the local halide ion composition, opening pathways to a wide range of applications.
The separation of CO 2 from N 2 using polymeric membranes has proven a particularly challenging task. One promising class of polymers for this application is alkoxysilyl-substituted vinyl-added polynorbornenes (VAPNBs), which are high T g materials that often exhibit notable CO 2 /N 2 separation performance. This performance is believed to arise from their anomalous behavior in which they display high levels of solubility selectivity, a trait more commonly encountered in rubbery polymers than high T g glassy materials. While this trait has been documented in literature, no systematic investigations have been reported that probe the relationship between alkoxysilyl-substituted VAPNB structure and their resultant gas separation behavior. Here, we describe the synthesis and evaluation of three sets of alkoxysilyl-substituted VAPNBs that are designed to probe distinct facets of their structure-transport relationship. This includes investigations into the effect that alkoxysilyl branching, chain length, and carbon linker length have on CO 2 /N 2 permeability, solubility, and diffusivity.
Greenhouse effect, largely caused by CO 2 emission, has become a major concern for global climate change. Post-combustion CO 2 capture is one of the critical strategies to mitigate this issue. Membrane technology for carbon capture has drawn significant attention because of the cost and energy efficiency and scalability. Many membranes for CO 2 capture are limited by the trade-off between CO 2 permeability and CO 2 /N 2 selectivity and the long-term stability under practical operating conditions. Facilitated transport membranes with efficient CO 2 carriers have demonstrated potential to surpass the permeability-selectivity trade-off, but these carriers are often lost under operational conditions. In this work, we designed and fabricated a polystyrene sulfonate (PSS) stabilized polyethylenimine (PEI) membrane by a facile and scalable spray-coating method. The deposited defect-free selective layer, in which the amine carriers in PEI can be stabilized electrostatically by PSS, exhibited superior CO 2 separation performance with good long-term stability under practical operating conditions. The separation performance was optimized by spray-coating cycles, CNT network loading, and PSS loading. Our membrane showed CO 2 permeance ranging from 820 to 1,770 GPU and CO 2 /N 2 selectivity varying from 395 to 460 under vacuum operation mode in the temperature range between 80 and 90 °C. Furthermore, the membrane was successfully scaled up to 200 cm 2 with good uniformity. These results might suggest a novel membrane structure and a scalable approach for fabrication of highly efficient CO 2 separation membranes.