Engineering PapersSearch

SEARCH · Engineering Papers

Results for “quantum materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Growth of ultra-flat ultra-thin alkali antimonide photocathode films

Ultra-flat, ultra-thin alkali antimonide photocathodes with high crystallinity can exhibit high quantum efficiency and low mean transverse energy of outgoing electrons, which are essential requirements for a variety of applications for photocathode materials. Here, we investigate the growth of Cs 3 Sb on graphene-coated 4H–SiC (Gr/4H–SiC), 3C–SiC, and Si 3 N 4 substrates. Sb is deposited using pulsed laser deposition, while Cs is deposited thermally and simultaneously. We demonstrate, employing x-ray analysis and quantum efficiency measurements, that this growth method yields atomically smooth Cs 3 Sb photocathodes with a high quantum efficiency (>10%), even in the ultra-thin limit (<30 nm). For the Si 3 N 4 substrate, film growth is shown to be polycrystalline, while films grown on Gr/4H–SiC show a high degree of ordering with signs of epitaxy.

36 MATERIALS SCIENCE

Ultrafast and Highly Collimated Radially Polarized Photons at Room Temperature from a Colloidal Quantum Dot Coupled to a Hybrid Nanoantenna

To harness the potential of radially polarized photons for classical and quantum communication applications, we demonstrate an on-chip, room-temperature device, which generates highly directional radially polarized photons at very high rates. The photons are emitted from a giant CdSe/CdS colloidal quantum dot (gQD) accurately positioned at the tip of a metal nanocone centered inside a hybrid metal-dielectric bullseye antenna. We show that due to the large and selective Purcell enhancement specifically for the out-of-plane optical dipole of the gQD, the emitted photons can have a very high degree of radial polarization (>93%), based on a quantitative metric. Our study emphasizes the importance of accurate gQD positioning for optimal radial polarization purity through extensive experiments and simulations, which contribute to the fundamental understanding of radial polarization in nanostructured devices and pave the way for implementation of such systems in practical applications using structured quantum light.

36 MATERIALS SCIENCE

Selective enhancement of Coulomb interactions in planar Weyl fermions

We report on our study of the electron interaction effects in topological two-dimensional (2D) materials placed in a quantizing magnetic field. Taking our cue from a recent experimental report, we consider a particular case of bismuthene monolayer with a strong spin-orbit interaction which can be a Weyl semimetal when placed on a specially tuned substrate. Interestingly, we observe that in some Landau levels of this material, the interaction effects are enhanced compared to those for a conventional 2D system and graphene monolayer. Such an enhancement of electron-electron interactions in these materials is largely due to an anisotropy present in the materials. Additionally, the interaction effects can be tuned by changing the coupling to the substrate and the strongest inter-electron interactions are observed when the system is a Weyl semimetal. Furthermore, the observed enhancement of the interaction effects can therefore be an important signature of the 2D Weyl fermions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND

Visible photoluminescence of porous Si(1-x)Ge(x) obtained by stain etching

We have investigated visible photoluminescence (PL) from thin porous Si(1-x)Ge(x) alloy layers prepared by stain etching of molecular-beam-epitaxy-grown material. Seven samples with nominal Ge fraction x varying from 0.04 to 0.41 were studied at room temperature and 80 K. Samples of bulk stain etched Si and Ge were also investigated. The composition of the porous material was determined using X-ray photoemission spectroscopy and Rutherford backscattering techniques to be considerably more Ge-rich than the starting epitaxial layers. While the luminescence intensity drops significantly with the increasing Ge fraction, we observe no significant variation in the PL wavelength at room temperature. This is clearly in contradiction to the popular model based on quantum confinement in crystalline silicon which predicts that the PL energy should follow the bandgap variation of the starting material. However, our data are consistent with small active units containing only a few Si atoms that are responsible for the light emission. Such units are present in many compounds proposed in the literature as the cause of the visible PL in porous Si.

Ksendzov, A.

Orbital Inverse Faraday and Cotton-Mouton Effects in Hall Fluids

We report two light-induced orbital magnetization effects in quantum Hall (QH) fluids, stemming from their transverse response. The first is a purely transverse contribution to the inverse Faraday effect (IFE), where circularly polarized light induces a dc magnetization by stirring the charged fluid. This contribution dominates the IFE in the QH regime. The second is the orbital inverse Cotton-Mouton effect (ICME), in which linearly polarized light generates a dc magnetization. Since the applied field in the ICME does not break time-reversal symmetry, the induced magnetization directly probes the chiral orbital response of the fluid at the driving frequency. We estimate that the resulting magnetization lies in the range of 0.5–10 Bohr magnetons per charge carrier in materials such as graphene and transition-metal dichalcogenides (TMDs) in the QH regime. Finally, we show that the induced magnetization is accompanied by a local correction to the static particle density, enabling optical quantum printing of density profiles into the QH fluid.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND

Scanning probe spectroscopy of sulfur vacancies and MoS 2 monolayers in side-contacted van der Waals heterostructures

We investigate the interplay between vertical tunneling and lateral transport phenomena in electrically contacted van der Waals heterostructures made from monolayer MoS 2 , hBN, and graphene. We compare data taken by low-temperature scanning tunneling spectroscopy to results from room-temperature conductive atomic force spectroscopy on monolayer MoS 2 with sulfur vacancies and with varying hBN layers. We show that for thick hBN barrier layers, where tunneling currents into the conductive substrate are suppressed, a side-contact still enables addressing the defect states in the scanning tunneling microscopy via the lateral current flow. Few-layer hBN realizes an intermediate regime in which the competition between vertical tunneling and lateral transport needs to be considered. The latter is relevant for device structures with both a thin tunneling barrier and a side-contact to the semiconducting layers.

36 MATERIALS SCIENCE

Signatures of chiral superconductivity in rhombohedral graphene

Chiral superconductors are unconventional superconducting states that break time-reversal symmetry spontaneously and typically feature Cooper pairing at non-zero angular momentum. Such states may host Majorana fermions and provide an important platform for topological physics research and fault-tolerant quantum computing. Despite intensive search and prolonged studies of several candidate systems, chiral superconductivity has remained elusive so far. Here we report the discovery of robust unconventional superconductivity in rhombohedral tetralayer and pentalayer graphene without moiré superlattice effects. We observed two superconducting states in the gate-induced flat conduction bands with T c up to 300 mK and charge density n e down to 2.4 ×10 11 cm −2 in five devices. Spontaneous time-reversal-symmetry breaking (TRSB) owing to orbital motion of the electron is found and several observations indicate the chiral nature of these superconducting states, including: (1) in the superconducting state, R xx shows magnetic hysteresis in varying out-of-plane magnetic field B ⊥ —absent from all other superconductors; (2) the superconducting states are robust against in-plane magnetic field and are developed within a spin-polarized and valley-polarized quarter-metal (QM) phase; (3) the normal states show anomalous Hall signals at zero magnetic field and magnetic hysteresis. Here, we also observed a critical B ⊥ of 1.4 T, higher than any graphene superconductivity, which indicates a strong-coupling superconductivity close to the Bardeen–Cooper–Schrieffer (BCS)–Bose–Einstein condensate (BEC) crossover. Our observations establish a pure carbon material for the study of topological superconductivity, with the promise to explore Majorana modes and topological quantum computing.

36 MATERIALS SCIENCE

A quantum theoretical study of polyimides

One of the most important contributions of theoretical chemistry is the correct prediction of properties of materials before any costly experimental work begins. This is especially true in the field of electrically conducting polymers. Development of the Valence Effective Hamiltonian (VEH) technique for the calculation of the band structure of polymers was initiated. The necessary VEH potentials were developed for the sulfur and oxygen atoms within the particular molecular environments and the explanation explored for the success of this approximate method in predicting the optical properties of conducting polymers.

Burke, Luke A.

Emergent Inductance from Chiral Orbital Currents in a Bulk Ferrimagnet

Here, we report the discovery of a new form of inductance in the bulk ferrimagnet Mn 3 ⁢Si 2 ⁢Te 6 , which features strong spin-orbit coupling, large magnetic anisotropy, and pronounced magnetoelastic interactions. Below its Curie temperature (𝑇 𝐶 ≈ 78 K), Mn 3 ⁢Si 2 ⁢Te 6 hosts chiral orbital currents (COC) that circulate within the crystal lattice and give rise to collective electronic behavior [Control of chiral orbital currents in a colossal magnetoresistance material, Nature (London) 611, 467 (2022).]. By applying a magnetic field along the hard 𝑐 axis and driving the system with low-frequency currents, we uncover a giant inductive response up to millhenry scale, originating from first-order reconfigurations of COC domains. These domains act as coherent mesoscopic inductive elements that resist reversal upon current reduction, producing a large electromotive force and sharply increasing voltage. This emergent inductance defies classical models, occurs without superconductivity or engineered nanostructures, and opens a new frontier in orbital-based quantum functionality and device concepts.

complex materials

A New Theoretical Framework for Designing Ion Transport Pathways

The rapid transport of specific ions through matter is critical to energy storage, membrane separations, and health. However, commercial materials resist ion transport, lack specificity, or both, making ion transport costly and ineffective. Inspiration for new material designs can be taken from biology, where membrane transport proteins exert exquisite control over the specificity and rate of ion transport. The challenge in understanding and designing transport pathways is that ions often exchange their hydrating waters for direct contacts with atoms in the transport pathway. Despite intense study over decades, no theory exists to explain local ion binding and transport mechanisms and experiments cannot differentiate reliably between ions and water in binding sites. Here, we developed a new approach, based on quantum methods and extension of the quasi-chemical free energy theory, to understand and design pathways through materials for rapid transport of specific ions. Understanding ion transport mechanisms will significantly advance our nation’s ability to develop cost-effective materials for energy sustainability and therapeutics for health.

36 MATERIALS SCIENCE

Near Room Temperature Solvothermal Growth of Ferroelectric CsPbBr 3 Nanoplatelets with Ultralow Dark Current

CsPbBr 3 exhibits outstanding optoelectronic properties and thermal stability, making it a coveted material for detectors, light-emitting diodes, and solar cells. Despite observations of ferroelectricity in CsPbBr 3 quantum dots, synthesizing bulk ferroelectric CsPbBr 3 crystals has remained elusive, hindering its potential in next-generation optoelectronic devices like optical switches and ferroelectric photovoltaics. Here, a breakthrough is reported: a novel solvothermal technique enabling the growth of ferroelectric CsPbBr 3 nanoplatelets with lateral dimensions in the tens of micrometers. This represents a significant step toward achieving large-area ferroelectric CsPbBr 3 crystals. Unlike traditional methods, this approach allows for growth and crystallization of CsPbBr 3 in alcohol solutions by enhancing precursor solubility. Further this study confirms the ferroelectric nature of these nanoplatelets using second harmonic generation, electrical characterizations, and piezoresponse force microscopy. This work paves the way for utilizing ferroelectric CsPbBr 3 in novel optoelectronic devices, significantly expanding the potential of this material and opening doors for further exploration in this exciting field.

25 ENERGY STORAGE

INSPIRED: Inelastic neutron scattering prediction for instantaneous results and experimental design

Inelastic neutron scattering (INS) has unique advantages in probing how atoms vibrate and how the vibrations propagate and interact. Such dynamic information is crucial in understanding various material properties, from heat capacity, thermal conductivity, phase transitions, and chemical reactions to more exotic quantum behavior. The analysis and interpretation of the INS spectra often start from a model structure of the sample, followed by a series of calculations to obtain the simulated spectra to compare with experiments. The conventional way to perform such calculations usually requires significant time, computing resources, and specialized expertise. Here, we present a new program named INSPIRED (Inelastic Neutron Scattering Prediction for Instantaneous Results and Experimental Design), which enables users to perform rapid INS simulations in several different ways on their personal computers in just a few clicks, with the crystal structure as the only input file. Specifically, the users can choose a pre-trained symmetry-aware neural network (coupled with an autoencoder) to predict the phonon density of states (DOS), 1D S(E) and 2D S(|Q|,E) spectra for any given structure. One can also choose an existing density functional theory (DFT) calculation from a database (containing over 12,000 crystals), and quickly obtain the simulated INS spectra for single crystals and powders. It is also possible to use pre-trained universal machine learning force fields to relax a given crystal structure, calculate the phonon dispersion and DOS, and, subsequently, the INS spectra. All these functions are implemented with a PyQt graphic user interface. Finally, we expect these new tools will benefit broad user communities and significantly improve the efficiency of experiment design, execution, and data analysis for INS.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS

Cavity electrodynamics of van der Waals heterostructures

Van der Waals heterostructures host many-body quantum phenomena that are tunable in situ using electrostatic gates. Their constituent two-dimensional materials and gates can naturally form plasmonic self-cavities, confining light in standing waves of current density due to finite-size effects. The plasmonic resonances of typical graphite gates fall in the gigahertz to terahertz range, corresponding to the same microelectronvolt to millielectronvolt energy scale as the phenomena in van der Waals heterostructures that they electrically control. This raises the possibility that the built-in cavity modes of graphite gates are relevant for shaping the low-energy physics of these heterostructures. However, probing these cavity-coupled electrodynamics is challenging as devices are notably smaller than the diffraction limit at the relevant wavelengths. Here we report on the intrinsic cavity conductivity of gate-tunable graphene heterostructures. As the carrier density is tuned, we observe coupling and spectral weight transfer between graphene and graphite plasmonic cavity modes in the ultrastrong coupling regime. We present an analytical model to describe the results and provide general principles for cavity design. Our findings show that intrinsic cavity effects are important for understanding the low-energy electrodynamics of van der Waals heterostructures and open a pathway for useful functionality through cavity control.

Electronic properties and materials

Temperature-based reactive flow model for triaminotrinitrobenzene (TATB) plastic bonded explosives

A new reactive flow model is presented for triaminotrinitrobenzene (TATB)-based plastic bonded explosives, applicable to shock initiation and steady detonation problems of differing initial temperature. Temperature disequilibrium is assumed between unreacted explosive, material in the vicinity of compressed defects (called hot spots), and reaction products. The model incorporates temperature-dependent decomposition reaction rates. Particularly, Arrhenius model parameters were derived from quantum-based molecular dynamics simulations of TATB decomposition. Further, a model of detonation carbon aggregation is incorporated, describing the slow release of energy inherent to detonation in TATB-based materials. Model parameters were calibrated against gas gun shock initiation experiments and steady detonation rate stick tests. The predictive ability of the model in the shock initiation regime is tested against recent thin pulse experiments. The model is found to perform equally well in predicting the size-effect curve of ambient, cold, and hot rate sticks. The present work demonstrates the viability of incorporating results from subscale simulations into a continuum-scale reactive flow model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH

Principles of two-dimensional terahertz spectroscopy of collective excitations: The case of Josephson plasmons in layered superconductors

Two-dimensional terahertz spectroscopy (2DTS), a terahertz analog of nuclear magnetic resonance, is a new technique poised to address many open questions in complex condensed matter systems. The conventional theoretical framework used ubiquitously for interpreting multidimensional spectra of discrete quantum level systems is, however, insufficient for the continua of collective excitations in strongly correlated materials. Here, in this work, we develop a theory for 2DTS of a model collective excitation, the Josephson plasma resonance in layered superconductors. Starting from a mean-field approach at temperatures well below the superconducting phase transition, we obtain expressions for the multidimensional nonlinear responses that are amenable to intuition derived from the conventional single-mode scenario. We then consider temperatures near the superconducting critical temperature T c , where dynamics beyond mean-field become important and conventional intuition fails. As fluctuations proliferate near T c , the dominant contribution to nonlinear response comes from an optical parametric drive of counterpropagating Josephson plasmons, which gives rise to 2D spectra that are qualitatively different from the mean-field predictions. As such, and in contrast to one-dimensional spectroscopy techniques, such as third harmonic generation, 2DTS can be used to directly probe thermally excited finite-momentum plasmons and their interactions. Our theory can readily be tested in cuprates, and we discuss implications beyond the present context of Josephson plasmons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND

Blocked impurity band hybrid infrared focal plane arrays for astronomy

High-performance infrared hybrid focal plane arrays using 10- x 50-element Si:As blocked-impurity-band (BIB) detectors (cutoff wavelength = 28 microns) and matching switched MOSFET multiplexers have been developed and characterized for space astronomy. Use of impurity-band-conduction technology provides detectors which are nuclear-radiation-hard and free of the many anomalies associated with conventional silicon photoconductive detectors. Emphasis in the present work is on recent advances in detector material quality which have led to significantly improved detector and hybrid characteristics. Results demonstrating increased quantum efficiency (particularly at short-wavelength infrared), obtained by varying the BIB detector properties (infrared active layer thickness and arsenic doping profile), are summarized. Measured read noise and dark current for different temperatures are reported. The hybrid array performance achieved demonstrates that BIB detectors are well suited for use in astronomical instrumentation.

Reynolds, D. B.

Effect of InAlAs window layer on the efficiency of indium phosphide solar cells

Indium phosphide (InP) solar cell efficiencies are limited by surface recombination. The effect of a wide-bandgap lattice-matched indium aluminum arsenide (In0.52Al0.48As) window layer on the performance of InP solar cells was investigated using a numerical code PC-1D. The p(+)n InP solar cell performance improves significantly with the use of a window layer. No improvement is seen for n(+)p InP cells. Cell results are explained by the band diagram of the heterostructure and the conduction-band energy discontinuity. The calculated I-V and internal quantum efficiency results clearly demonstrate that In0.52Al0.48As is a promising candidate as a window layer material for p(+)n InP solar cells.

Jain, R. K.