Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “predictive control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Fuel performance evaluation of two high burnup PWR core designs during normal operation, control rod withdrawal, and control rod ejection scenarios

There is interest among utilities to extend the current, 18-month operating cycle to 24 months. Economically, this extension would require greater than 5 % enrichment and peak rod average discharge burnup levels above 62 GWd/MTU. A notable challenge of increasing enrichment is the resulting additional excess reactivity encountered during the early stages of fuel life. To accommodate, burnable absorbers beyond soluble boron are introduced into the fuel system. In high burnup fuels, the possibilities of cladding lift-off and fuel melting increase due, in part, to increased rod internal pressures and limited fuel thermal conductivity, respectively. This work collaboratively employs PARCS, RELAP5-3D, and BISON to compare the fuel performance of two high burnup fuel candidates with higher than 5 % enrichment. Here, the fuel performance parameters were compared to current NRC guidance. The results demonstrate an annular fuel design with homogenously blended gadolinium as a burnable absorber operates with greater safety margins during normal operation, allowing for additional operational flexibility. During normal operation, the core design utilizing Integral Fuel Burnable Absorber pins contained fuel pins which reached plenum pressures above 15.5 MPa by the end of the first fuel cycle and fuel pins experienced cladding hoop strains above 1 %. In the Gd core design, only two observed pins experienced plenum pressures above 15.5 MPa and no pins exceeded 1 % cladding hoop strain. During the control rod withdrawal scenario, plenum pressures for pins in both designs marginally exceeded system pressure, however neither experienced excessive hoop strain. The Gd core design experienced a maximum fuel temperature of 2418 K, which is significantly higher than the Integral Fuel Burnable Absorber design at 2157 K, but still within regulatory guidance. We predicted that the fuel in both could return to service after the CRW event. We also predicted that cladding would not fail during the Control Rod Ejection in either core design. Generally, the Integral Fuel Burnable Absorber core design performed with greater safety margin with regards to temperature during normal operation and the transient events. However, the Gd core design performed with greater safety margin regarding plenum pressure and hoop strain limits during normal operation and both transient events.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Semitauonic b-hadron decays: A lepton flavor universality laboratory

The study of lepton flavor universality violation (LFUV) in semitauonic b-hadron decays has become increasingly important in light of long-standing anomalies in their measured branching fractions, and the large datasets anticipated from the LHC experiments and Belle II. Here, in this review, a comprehensive survey of the experimental environments and methodologies for semitauonic LFUV measurements at the B factories and LHCb is undertaken, along with an overview of the theoretical foundations and predictions for a wide range of semileptonic decay observables. The future prospects of controlling systematic uncertainties down to the percent level, matching the precision of standard model (SM) predictions, are examined. Furthermore, new perspectives and caveats on combinations of the LFUV data are discussed and the world averages for the R(D(*)) ratios are revisited. Here it is demonstrated that different treatments for the correlations of uncertainties from D** excited states can vary the current 3σ tension with the SM within a 1σ range. Prior experimental overestimates of D**τν contributions may further exacerbate this. The precision of future measurements is also estimated; their power to exploit full differential information, and solutions to the inherent difficulties in self-consistent new physics interpretations of LFUV observables, are explored.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Plant responses to elevated CO 2 under competing hypotheses of nitrogen and phosphorus limitations

Abstract The future ecosystem carbon cycle has important implications for biosphere‐climate feedback. The magnitude of future plant growth and carbon accumulation depends on plant strategies for nutrient uptake under the stresses of nitrogen (N) versus phosphorus (P) limitations. Two archetypal theories have been widely acknowledged in the literature to represent N and P limitations on ecosystem processes: Liebig's Law of the Minimum (LLM) and the Multiple Element Limitation (MEL) approach. LLM states that the more limiting nutrient controls plant growth, and commonly leads to predictions of dramatically dampened ecosystem carbon accumulation over the 21st century. Conversely, the MEL approach recognizes that plants possess multiple pathways to coordinate N and P availability and invest resources to alleviate N or P limitation. We implemented these two contrasting approaches in the E3SM model, and compiled 98 in situ forest N or P fertilization experiments to evaluate how terrestrial ecosystems will respond to N and P limitations. We find that MEL better captured the observed plant responses to nutrient perturbations globally, compared with LLM. Furthermore, LLM and MEL diverged dramatically in responses to elevated CO 2 concentrations, leading to a two‐fold difference in CO 2 fertilization effects on Net Primary Productivity by the end of the 21st century. The larger CO 2 fertilization effects indicated by MEL mainly resulted from plant mediation on N and P resource supplies through N 2 fixation and phosphatase activities. This analysis provides quantitative evidence of how different N and P limitation strategies can diversely affect future carbon and nutrient dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Riverine dissolved organic matter transformations increase with watershed area, water residence time, and Damköhler numbers in nested watersheds

Abstract Quantifying the relative influence of factors and processes controlling riverine ecosystem function is essential to predicting future conditions under global change. Dissolved organic matter (DOM) is a fundamental component of riverine ecosystems that fuels microbial food webs, influences nutrient and light availability, and represents a significant carbon flux globally. The heterogeneous nature of DOM molecular composition and its propensity for interaction (i.e., functional diversity) can characterize riverine ecosystem function across spatiotemporal scales. To investigate fundamental drivers of DOM diversity, we collected seasonal water samples from 42 nested locations within five watersheds spanning multiple watershed sizes (~ 5 to 30,000 km 2 ) across the United States. Patterns in DOM molecular richness, aromaticity, relative abundance of N-containing formulas, and putative biochemical transformations derived from high-resolution mass spectrometry were assessed across gradients of explanatory variables associated with watershed characteristics (e.g., watershed area, water residence time, land cover). We found that putative biochemical transformations were more strongly related to explanatory variables across watersheds than common bulk DOM parameters and that watershed area, surface water residence time and derived Damköhler numbers representing DOM reactivity timescales were strong predictors of DOM diversity. The data also indicate that catchment-specific land cover factors can significantly influence DOM diversity in diverging directions. Overall, the results highlight the importance of considering water residence time and land cover when interpreting longitudinal patterns in DOM chemistry and the continued challenge of identifying generalizable drivers that are transferable across watershed and regional scales for application in Earth system models. This work also introduces a Findable Accessible Interoperable Reusable (FAIR) dataset (> 300 samples) to the community for future syntheses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Operator learning for energy-efficient building ventilation control with computational fluid dynamics simulation of a real-world classroom

Energy-efficient ventilation control plays an important role in reducing building energy consumption while ensuring occupant health and comfort. While Computational Fluid Dynamics (CFD) simulations provide detailed and physically accurate representations of indoor airflow, their high computational cost limits their use in real-time building control. In this work, we present a neural operator learning framework that combines the physical accuracy of CFD with the computational efficiency of machine learning to enable building ventilation control with the high-fidelity fluid dynamics models. Our method jointly optimizes the airflow supply rates and vent angles to reduce energy use and adhere to air quality constraints. We train an ensemble of neural operator transformer models to learn the mapping from building control actions to airflow fields using high-resolution CFD data. This learned neural operator is then embedded in an optimization-based control framework for building ventilation control. Experimental results show that our approach achieves significant energy savings compared to maximum airflow rate control, rule-based control, as well as data-driven control methods using spatially averaged CO 2 prediction and deep learning–based reduced-order models, while consistently maintaining safe indoor air quality. These results highlight the practicality and scalability of our method in maintaining energy efficiency and indoor air quality in real-world buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Abiotic influences on continuous conifer forest structure across a subalpine watershed

Understanding the abiotic drivers of high-elevation forest physiognomy is essential for forecasting how mountain ecosystems will respond to emerging environmental pressures. Most prior studies of these relationships have relied on small samples of the full landscape, resulting in limited power to detect dominant covariates and their interactions. Here we report the first evaluation of abiotic influences on a complement of accurate, wall-to-wall estimates of conifer forest structure and composition at the watershed scale. In a subalpine conifer domain in the Colorado Rocky Mountains (USA), we developed a novel method for deriving stand structure metrics from waveform LiDAR data, which showed high fidelity with field inventory. We quantified the relationships between structural and compositional metrics and climate, topographic, edaphic, and geologic factors. Our results showed that peak snow water equivalent (SWE), snow disappearance rate, and elevation explained most of the variation in forest structure. The highest stand density, basal area, maximum canopy height, and quadratic mean diameter occurred in sites with SWE around one standard deviation below mean, but with long snow residence times. Stand density decreased linearly with elevation, while other metrics peaked between 3000 m and 3200 m. Substrate properties had weaker influence. Continuous mapping of through-canopy forest structure enabled our novel findings of the dominant role of snowpack in explaining structural and compositional variation, and of elevation thresholds. Our reproducible approach facilitates assessment of forest-topoclimate relationships in other conifer-dominated landscapes and improves understanding of the baseline patterns controlling forest structure, which is needed for predicting long-term ecological change.

forest ecology↗
DOE OSTI2020

Calcium-Uranyl-Carbonato Species Kinetically Limit U(VI) Reduction by Fe(II) and Lead to U(V)-Bearing Ferrihydrite

Reaction conditions and mechanisms promoting or inhibiting U reduction exert a central control on U solubility and, therefore, U transport and its associated risks. Here, we vary and track common aqueous uranium species to show that a kinetic restriction inhibits homogeneous reduction of the calcium-uranyl-carbonato species (CaUO$_2$(CO$_3$)$_3$$^{2–}$ and Ca$_2$UO$_2$(CO$_3$)$_3$) by Fe(II)$_{(aq)}$, while ferrihydrite surface-catalyzed reduction of all aqueous uranyl by Fe(II) proceeds. Using U L$_3$ high energy resolution fluorescence detection (HERFD) X-ray absorption near edge structure (XANES) spectroscopy, U L$_3$ extended X-ray absorption fine structure (EXAFS) spectroscopy, and transmission electron microscopy (TEM), we also show that U(V) is generated and incorporated into ferrihydrite formed from homogeneous U(VI) reduction by Fe(II)(aq). Through elucidation of the mechanisms that inhibit reduction of the calcium-uranyl-carbonato species and promote stabilization of U(V), we advance our understanding of the controls on U solubility and thus improve prediction of U transport in surface and subsurface systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Moist Energy Constraints on Surface Temperature Variance Under Climate Warming

Understanding the factors controlling surface temperature variance is crucial for predicting temperature extremes. Previous investigations have examined individual impacts of temperature advection and surface turbulent fluxes on temperature fluctuations. Here, we explore the constraints on temperature variance from the moist static energy (MSE) balance and introduce a new scaling relation that connects the generation of temperature variance through moist energy transport with its dissipation due to the net energetic forcing of the atmosphere. This theory is evaluated in an idealized aquaplanet model. We find that surface temperature variance is influenced by eddy (sensible) heat flux, MSE gradient, and the Clausius‐Clapeyron relation for evaporative cooling. Under global warming, the reduced temperature variance in the aquaplanet model is dominated by the weakening in eddy heat flux, but it is also affected by changes in evaporative cooling and MSE gradient, which may be more important in realistic, moisture‐limited regions over land.

Eddy heat flux↗
DOE OSTI2026

Cavity-altered superconductivity

Is it feasible to alter the ground-state properties of a material by engineering its electromagnetic environment? Inspired by theoretical predictions, experimental realizations of such cavity-controlled properties without optical excitation are beginning to emerge. Here we devised and implemented a new platform to realize cavity-altered materials. Single crystals of hyperbolic van der Waals (vdW) compounds provide a resonant electromagnetic environment with enhanced density of photonic states and prominent mode confinement. We interfaced hexagonal boron nitride (hBN) with the molecular superconductor κ-(BEDT-TTF) 2 Cu[N(CN) 2 ]Br (κ-ET). The frequencies of infrared hyperbolic modes (HMs) of hBN match the infrared-active carbon–carbon (C=C) stretching molecular resonance of κ-ET implicated in superconductivity. Nano-optical data supported by first-principles molecular Langevin dynamics simulations confirm the presence of resonant coupling between the hBN hyperbolic cavity modes and the C=C stretching mode in κ-ET. Meissner-effect measurements using magnetic force microscopy (MFM) demonstrate a strong suppression of superfluid density near the hBN/κ-ET interface. Non-resonant control heterostructures, including RuCl 3 /κ-ET and hBN/Bi 2 Sr 2 CaCu 2 O 8+x (BSCCO), do not show the pronounced superfluid suppression. These observations suggest that hBN/κ-ET realizes a cavity-altered superconducting ground state. Our work highlights the potential of dark cavities devoid of external photons for engineering electronic ground-state properties of complex quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Global stellarator coil optimization with quadratic constraints and objectives

Most present stellarator designs are produced by costly two-stage optimization: the first for an optimized equilibrium, and the second for a coil design reproducing its magnetic configuration. Few proxies for coil complexity and forces exist at the equilibrium stage. Rapid initial state finding for both stages is a topic of active research. Most present convex coil optimization codes use the least square winding surface method by Merkel (NESCOIL), with recent improvements in conditioning, regularization, sparsity, and physics objectives. While elegant, the method is limited to modeling the norms of linear functions in coil current. We present QUADCOIL, a global coil optimization method that targets combinations of linear and quadratic functions of the current. It can directly constrain and/or minimize a wide range of physics objectives unavailable in NESCOIL and REGCOIL, including the Lorentz force, magnetic energy, curvature, field-current alignment, and the maximum density of a dipole array. QUADCOIL requires no initial guess and runs nearly $10$ 2 x faster than filament optimization. Integrating it in the equilibrium optimization stage can potentially exclude equilibria with difficult-to-design coils, without significantly increasing the computation time per iteration. QUADCOIL finds the exact, global minimum in a large parameter space when possible, and otherwise finds a well-performing approximate global minimum. It supports most regularization techniques developed for NESCOIL and REGCOIL. We demonstrate QUADCOIL’s effectiveness in coil topology control, minimizing non-convex penalties, and predicting filament coil complexity with three numerical examples.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Can socio-economic indicators of vulnerability help predict spatial variations in the duration and severity of power outages due to tropical cyclones?

Abstract Tropical cyclones are the leading cause of major power outages in the U.S., and their effects can be devastating for communities. However, few studies have holistically examined the degree to which socio-economic variables can explain spatial variations in disruptions and reveal potential inequities thereof. Here, we apply machine learning techniques to analyze 20 tropical cyclones and predict county-level outage duration and percentage of customers losing power using a comprehensive set of weather, environmental, and socio-economic factors. Our models are able to accurately predict these outage response variables, but after controlling for the effects of weather conditions and environmental factors in the models, we find the effects of socio-economic variables to be largely immaterial. However, county-level data could be overlooking effects of socio-economic disparities taking place at more granular spatial scales, and we must remain aware of the fact that when faced with similar outage events, socio-economically vulnerable communities will still find it more difficult to cope with disruptions compared to less vulnerable ones.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Thermal stress in degraded forests in the Brazilian Amazon Arc of Deforestation

Understanding thermal stress in tropical forests has taken on new urgency in light of accelerating climate change and expansion of deforestation and forest degradation. Degraded tropical forests in particular may be approaching critical temperature thresholds even more rapidly than intact forests, with implications for tree survival and ecosystem recovery. We investigate thermal stress in degraded tropical forests within the Brazilian Amazon Arc of Deforestation. Using land surface temperature data from the ECOsystem Spaceborne Thermal Radiometer Experiment on the international Space Station (ECOSTRESS), we compared canopy temperatures of intact, selectively logged, and burned forests in Feliz Natal, Mato Grosso, Brazil. Upper canopy temperatures in previously burned forests were 4.1% higher (mean = 36.5 °C) and 50.9% more variable compared to intact and logged forests, which showed remarkably similar temperature distributions (means of 34.9 °C and 35.1 °C, respectively). Modeled leaf temperature distributions based on canopy temperature measurements from one of the warmest days in a 2 year dry season record indicated that 87% of leaves in the warmest burned forest patches exceeded the temperature threshold where respiration surpasses photosynthesis, compared to approximately 72%–74% in intact and logged forests, respectively, in the same time period. After controlling for environmental factors, burned forests were predicted to be 2.6 °C warmer on average [1.39 °C–3.96 °C, 95% credible interval] than intact forests across a 5–40 m canopy height range. Burned forests showed modest thermal recovery over time, with temperatures decreasing by approximately 1.2 °C over a 30 year recovery period. In contrast, logged forests showed minimal thermal differences from intact forests (−0.353 on average, [−1.125–0.274, 95% credible interval]) and negligible change (0.15 °C) over the same timeframe. While the absolute probabilities of exceeding damaging thermal thresholds remain low across all forest types under current climate conditions, the probability of leaves exceeding temperatures that cause permanent leaf damage was ten times higher in burned forests, with implications for the future of burned forest regeneration in water-limited regions of the Amazon basin. In particular, the combination of higher mean temperatures, greater temperature variability, and more frequent exposure to damaging thermal thresholds implies that burned tropical forests will experience substantially higher mortality rates and slower biomass recovery compared to intact and selectively logged forests, especially in water-limited regions where trees cannot rely on evaporative cooling to moderate canopy temperatures.

Brazilian Amazon Arc of Deforestation↗
DOE OSTI2024

Genetic underpinnings of arthropod community distributions in Populus trichocarpa

Community genetics seeks to understand the mechanisms by which natural genetic variation in heritable host phenotypes can encompass assemblages of organisms such as bacteria, fungi, and many animals including arthropods. Prior studies that focused on plant genotypes have been unable to identify genes controlling community composition, a necessary step to predict ecosystem structure and function as underlying genes shift within plant populations. Here, we surveyed arthropods within an association population of Populus trichocarpa in three common gardens to discover plant genes that contributed to arthropod community composition. We analyzed our surveys with traditional single-trait genome-wide association analysis (GWAS), multitrait GWAS, and functional networks built from a diverse set of plant phenotypes. Plant genotype was influential in structuring arthropod community composition among several garden sites. Candidate genes important for higher level organization of arthropod communities had broadly applicable functions, such as terpenoid biosynthesis and production of dsRNA binding proteins and protein kinases, which may be capable of targeting multiple arthropod species. We have demonstrated the ability to detect, in an uncontrolled environment, individual genes that are associated with the community assemblage of arthropods on a host plant, further enhancing our understanding of genetic mechanisms that impact ecosystem structure.

Community genetics↗
DOE OSTI2023

Microscopic activated dynamics theory of the shear rheology and stress overshoot in ultradense glass-forming fluids and colloidal suspensions

We formulate a particle and force level, activated dynamics-based statistical mechanical theory for the continuous startup nonlinear shear rheology of ultradense glass-forming hard sphere fluids and colloidal suspensions in the context of the elastically collective nonlinear Langevin equation approach and a generalized Maxwell model constitutive equation. Activated structural relaxation is described as a coupled local-nonlocal event involving caging and longer range collective elasticity which controls the characteristic stress relaxation time. Theoretical predictions for the deformation-induced enhancement of mobility, the onset of relaxation acceleration at remarkably low values of stress, strain, or shear rate, apparent power law thinning of the steady-state structural relaxation time and viscosity, a nonvanishing activation barrier in the shear thinning regime, an apparent Herschel–Buckley form of the shear rate dependence of the steady-state shear stress, exponential growth of different measures of a yield or flow stress with packing fraction, and reduced fragility and dynamic heterogeneity under deformation were previously shown to be in good agreement with experiments. The central new question we address here is the defining feature of the transient response—the stress overshoot. In contrast to the steady-state flow regime, understanding the transient response requires an explicit treatment of the coupled nonequilibrium evolution of structure, elastic modulus, and stress relaxation time. We formulate a new quantitative model for this aspect in a physically motivated and computationally tractable manner. Theoretical predictions for the stress overshoot are shown to be in good agreement with experimental observations in the metastable ultradense regime of hard sphere colloidal suspensions as a function of shear rate and packing fraction, and accounting for deformation-assisted activated motion appears to be crucial for both the transient and steady-state responses.

Mechanics↗
DOE OSTI2022

Magmatic water content controls the pre-eruptive depth of arc magmas

We report that vanguard efforts in forecasting volcanic eruptions are turning to physics-based models, which require quantitative estimates of magma conditions during pre-eruptive storage. Below active arc volcanoes, observed magma storage depths vary widely (~0 to 20 kilometers) and are commonly assumed to represent levels of neutral buoyancy. Here we show that geophysically observed magma depths (6 ± 3 kilometers) are greater than depths of neutral buoyancy, ruling out this commonly assumed control. Observed depths are instead consistent with predicted depths of water degassing. Intrinsically wetter magmas degas water and crystallize deeper than dry magmas, resulting in viscosity increases that lead to deeper stalling of ascending magma. The water–depth relationship provides a critical constraint for forecasting models by connecting depth of eruption initiation to its volatile fuel.

58 GEOSCIENCES↗
DOE OSTI2025

Fluid Mechanics Challenges in Direct-Ink-Writing Additive Manufacturing

Direct-ink writing (DIW) has rapidly become a versatile 3D fabrication method due to its ability to deposit a wide range of complex fluids into customizable 3D geometries. This review highlights key fundamental fluid mechanics and soft matter challenges across the different stages of the DIW printing process. The rheology of fluids and suspensions governs the flow behavior through narrow nozzles, posing questions about extrudability, confined flow dynamics, and clogging mechanisms. Downstream, the formation and deposition of extruded filaments involve extensional flows and potential instabilities, while postdeposition dynamics introduces complexities related to yield stress and structural stability. These stages are inherently interdependent, as optimizing material composition without considering filament stability risks compromising the final structure. As DIW applications expand through advanced ink formulations, developing fundamental fluid mechanics frameworks is essential to replace trial-and-error approaches with predictive design methodologies to enable more precise control and improved reliability of the printing process.

3D printing↗
DOE OSTI2025

Synapse v1.0

Synapse (SYNergistic software platform for AI, Physics Simulations, and Experiments) is a software package meant to deploy real-time guidance from simulations during experimental campaigns, The software package contains functionalities to collect data from simulations (e.g. running at NERSC) and experiments (e.g. from the BELLA facility at LBNL) into a database, train ML surrogate models from this data, and display the predictions of the surrogate model in the control room of an experimental facility, so as to guide on-going experimental campaign. This software was developed as part of an on-going LDRD.

Lehe, Remi [Lawrence Berkeley National Laboratory ↗
DOE OSTI2020

Linking crop traits to transcriptome differences in a progeny population of tetraploid potato

Background: Potato is the third most consumed crop in the world. Breeding for traits such as yield, product quality and pathogen resistance are main priorities. Identifying molecular signatures of these and other important traits is important in future breeding efforts. In this study, a progeny population from a cross between a breeding line, SW93–1015, and a cultivar, Désirée, was studied by trait analysis and RNA-seq in order to develop understanding of segregating traits at the molecular level and identify transcripts with expressional correlation to these traits. Transcript markers with predictive value for field performance applicable under controlled environments would be of great value for plant breeding.Results: A total of 34 progeny lines from SW93–1015 and Désirée were phenotyped for 17 different traits in a field in Nordic climate conditions and controlled climate settings. A master transcriptome was constructed with all 34 progeny lines and the parents through a de novo assembly of RNA-seq reads. Gene expression data obtained in a controlled environment from the 34 lines was correlated to traits by different similarity indices, including Pearson and Spearman, as well as DUO, which calculates the co-occurrence between high and low values for gene expression and trait. Our study linked transcripts to traits such as yield, growth rate, high laying tubers, late and tuber blight, tuber greening and early flowering. We found several transcripts associated to late blight resistance and transcripts encoding receptors were associated to Dickeya solani susceptibility. Transcript levels of a UBX-domain protein was negatively associated to yield and a GLABRA2 expression modulator was negatively associated to growth rate.Conclusion: In our study, we identify 100’s of transcripts, putatively linked based on expression with 17 traits of potato, representing both well-known and novel associations. This approach can be used to link the transcriptome to traits. We explore the possibility of associating the level of transcript expression from controlled, optimal environments to traits in a progeny population with different methods introducing the application of DUO for the first time on transcriptome data. We verify the expression pattern for five of the putative transcript markers in another progeny population.

59 BASIC BIOLOGICAL SCIENCES↗