Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “monolayers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

The work function of sub-monolayer cesium-covered gold: A photoelectronspectroscopy study

Using visible and X-ray photoelectron spectroscopy we measured the work function of a Au(111) surface at a well-defined sub-monolayer coverage of Cs. For a Cs coverage producing a photoemission maximum with a He-Ne laser, the work function is 1.61 {+-} 0.08 eV consistent with previous assumptions used to analyze vibrationally promoted electron emission. A discussion of possible Cs layer structures is also presented.

36 MATERIALS SCIENCE↗

Reversible work function changes induced by photoisomerization of asymmetric azobenzene dithiol self-assembled monolayers on gold

We measured reversible changes in the work function ({delta}{phi}{sub Au}) of gold substrates modified by asymmetric azobenzene dithiol self-assembled monolayers (SAMs) following photoisomerization and thermal recovery of the azo unit. The azobenzene derivative SAMs were photoisomerized to cis form by UV irradiation. {delta}{phi}{sub Au} was monitored in real time during thermal recovery to trans form by ultraviolet photoelectron spectroscopy using a synchrotron light source. Changing the substituted functional group in the p{sup '} position of the azobenzene from electron donating to electron withdrawing resulted in opposite responses of {delta}{phi}{sub Au} against photoisomerization. Hence, a direct correlation between {delta}{phi}{sub Au} and changes in molecular dipole moments was obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controllable modification of self-assembled monolayer surface by using N{sub 2} neutral beam process

A novel technique of low-energy N{sub 2} neutral beam (NB) (<10 eV) irradiation was investigated as a means of controlling the surface nitridation of self-assembled monolayers (SAMs). This low-energy process without UV photons was able to nitride the surfaces of terphenyl SAMs. Furthermore, by varying the on/off period for irradiation, a pulse-time modulated NB process could be used to control the atomic ratio of nitrogen in terphenyl molecules. Time-of-flight secondary ion mass spectra revealed that one H in the terphenyl group was substituted by a NH{sub 2} group because of irradiation by the N{sub 2} beam. The data suggested that the low-energy NB technique caused less damage to modified surfaces than the conventional plasma process did. Therefore, we believe that it is a potential damage-free process for modifying the surfaces of soft organic materials and films.

36 MATERIALS SCIENCE↗

Two-dimensional freezing criteria for crystallizing colloidal monolayers

Video microscopy was employed to explore crystallization of colloidal monolayers composed of diameter-tunable microgel spheres. Two-dimensional (2D) colloidal liquids were frozen homogenously into polycrystalline solids, and four 2D criteria for freezing were experimentally tested in thermal systems for the first time: the Hansen-Verlet freezing rule, the Loewen-Palberg-Simon dynamical freezing criterion, and two other rules based, respectively, on the split shoulder of the radial distribution function and on the distribution of the shape factor of Voronoi polygons. Importantly, these freezing criteria, usually applied in the context of single crystals, were demonstrated to apply to the formation of polycrystalline solids. At the freezing point, we also observed a peak in the fluctuations of the orientational order parameter and a percolation transition associated with caged particles. Speculation about these percolated clusters of caged particles casts light on solidification mechanisms and dynamic heterogeneity in freezing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fragmentation and reactivity in collisions of protonated diglycine with chemically modified perfluorinated alkylthiolate-self-assembled monolayer surfaces

Direct dynamics simulations are reported for quantum mechanical (QM)/molecular mechanical (MM) trajectories of N-protonated diglycine (gly{sub 2}-H{sup +}) colliding with chemically modified perfluorinated octanethiolate self-assembled monolayer (SAM) surfaces. The RM1 semiempirical theory is used for the QM component of the trajectories. RM1 activation and reaction energies were compared with those determined from higher-level ab initio theories. Two chemical modifications are considered in which a head group (-COCl or -CHO) is substituted on the terminal carbon of a single chain of the SAM. These surfaces are designated as the COCl-SAM and CHO-SAM, respectively. Fragmentation, peptide reaction with the SAM, and covalent linkage of the peptide or its fragments with the SAM surface are observed. Peptide fragmentation via concerted CH{sub 2}-CO bond breakage is the dominant pathway for both surfaces. HCl formation is the dominant species produced by reaction with the COCl-SAM, while for the CHO-SAM a concerted H-atom transfer from the CHO-SAM to the peptide combined with either a H-atom or radical transfer from the peptide to the surface to form singlet reaction products is the dominant pathway. A strong collision energy dependence is found for the probability of peptide fragmentation, its reactivity, and linkage with the SAM. Surface deposition, i.e., covalent linkage between the surface and the peptide, is compared to recent experimental observations of such bonding by Laskin and co-workers [Phys. Chem. Chem. Phys. 10, 1512 (2008)]. Qualitative differences in reactivity are seen between the COCl-SAM and CHO-SAM showing that chemical identity is important for surface reactivity. The probability of reactive surface deposition, which is most closely analogous to experimental observables, peaks at a value of around 20% for a collision energy of 50 eV.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystalline monolayer surface of liquid Au-Cu-Si-Ag-Pd: Metallic glass former

It is demonstrated by means of x-ray synchrotron reflectivity and diffraction that the surface of the liquid phase of the bulk metallic glass forming alloy Au 49 Cu 26.9 Si 16.3 Ag 5.5 Pd 2.3 consists of a two-dimensional crystalline monolayer phase for temperatures of up to about 50 K above the eutectic temperature. The present alloy as well as glass forming Au 82 Si 18 and Au-Si-Ge alloys containing small amounts of Ge are the only metallic liquids to exhibit surface freezing well above the melting temperature. This suggests that the phenomena of surface freezing in metallic liquids and glass forming ability are related and probably governed by similar physical properties.

36 MATERIALS SCIENCE↗

Electronic structures of an epitaxial graphene monolayer on SiC(0001) after metal intercalation (metal = Al, Ag, Au, Pt, and Pd): A first-principles study

The atomic structures and electronic properties of metal-intercalated (metal = Al, Ag, Au, Pt, and Pd) graphene monolayers on SiC(0001) were investigated using first-principles calculations. The unique Dirac cone of graphene near the K point reappeared as the graphite layer was intercalated by these metals at a coverage of 3/8 ML. Furthermore, our results show that metal intercalation leads to n-type doping of graphene. The bands contributed from graphene exhibit small splitting after intercalation, whereas the bands contributed from the intercalated metal layer have significant Rashba spin-orbit splittings in all cases except Al.

36 MATERIALS SCIENCE↗

Transmission of electron through monolayer graphene laser barrier

The present theoretical model deals with the transmission property of the Dirac fermions in the Floquet sidebands for the laser radiated graphene nanostructure. The laser assisted structure behaves as a tunneling barrier that leads to asymmetric transmission around the normal to the interface and is capable to confine the massless Dirac particles in a monolayer graphene strip. The absence of the Klein tunneling and the presence of a large number of controlling parameters would make the time dependent vector potential barrier superior over the electrostatic and magnetic barriers towards the opto-electronic device fabrication.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A surface enhanced Raman spectroscopy study of aminothiophenol and aminothiophenol-C{sub 60} self-assembled monolayers: Evolution of Raman modes with experimental parameters

P-aminothiophenol (PATP) is a well-known molecule for the preparation of self-assembled monolayers on gold via its thiol functional group. After adsorption, it has been demonstrated that this molecule is anchored to gold through its thiol group, and standing nearly upright at the surface with the amino functional group on top. This molecule has been extensively studied by surface enhanced Raman spectroscopy but its exact SERS spectrum remains unclear. Here, we demonstrate that it can be strongly affected by at least two experimental parameters: laser power and layer density. Those features are discussed in terms of a dimerization of the PATP molecules. The free amino group affords the adsorption of other molecules such as C{sub 60}. In this case, a complex multilayer system is formed and the question of its precise characterisation remains a key point. In this article, we demonstrate that surface enhanced Raman spectroscopy combined with x ray photoelectron spectroscopy can bring very important information about the organization of such a self-assembled multilayer on gold. In our study, the strong evolution of Raman modes after C{sub 60} adsorption suggests a change in the organization of aminothiophenol molecules during C{sub 60} adsorption. These changes, also observed when the aminothiophenol layer is annealed in toluene, do not prevent the adsorption of C{sub 60} molecules.

36 MATERIALS SCIENCE↗

Effect of fluorocarbon self-assembled monolayer films on sidewall adhesion and friction of surface micromachines with impacting and sliding contact interfaces

A self-assembled monolayer film consisting of fluoro-octyltrichlorosilane (FOTS) was vapor-phase deposited on Si(100) substrates and polycrystalline silicon (polysilicon) surface micromachines. The hydrophobic behavior and structural composition of the FOTS film deposited on Si(100) were investigated by goniometry and X-ray photoelectron spectroscopy, respectively. The effects of contact pressure, relative humidity, temperature, and impact/sliding cycles on the adhesive and friction behavior of uncoated and FOTS-coated polysilicon micromachines (referred to as the Si and FOTS/Si micromachines, respectively) were investigated under controlled loading and environmental conditions. FOTS/Si micromachines demonstrated much lower and stable adhesion than Si micromachines due to the highly hydrophobic and conformal FOTS film. Contrary to Si micromachines, sidewall adhesion of FOTS/Si micromachines demonstrated a weak dependence on relative humidity, temperature, and impact cycles. In addition, FOTS/Si micromachines showed low and stable adhesion and low static friction for significantly more sliding cycles than Si micromachines. The adhesive and static friction characteristics of Si and FOTS/Si micromachines are interpreted in the context of physicochemical surface changes, resulting in the increase of the real area of contact and a hydrophobic-to-hydrophilic transition of the surface chemical characteristics caused by nanoscale surface smoothening and the removal of the organic residue (Si micromachines) or the FOTS film (FOTS/Si micromachines) during repetitive impact and oscillatory sliding of the sidewall surfaces.

36 MATERIALS SCIENCE↗

The pristine atomic structure of MoS{sub 2} monolayer protected from electron radiation damage by graphene

Materials can, in principle, be imaged at the level of individual atoms with aberration-corrected transmission electron microscopy. However, such resolution can be attained only with very high electron doses. Consequently, radiation damage is often the limiting factor when characterizing sensitive materials. Here, we demonstrate a simple and an effective method to increase the electron radiation tolerance of materials by using graphene as protective coating. This leads to an improvement of three orders of magnitude in the radiation tolerance of monolayer MoS{sub 2}. Further on, we construct samples in different heterostructure configurations to separate the contributions of different radiation damage mechanisms.

36 MATERIALS SCIENCE↗

Photocatalytic and antibacterial properties of Au-TiO{sub 2} nanocomposite on monolayer graphene: From experiment to theory

The formation of the Au-TiO{sub 2} nanocomposite on monolayer Graphene (GTA) by sequentially depositing titanium dioxide particles and gold nanoparticles on graphene sheet was synthesized and analyzed in our work. The structural, morphological, and physicochemical properties of samples were thoroughly investigated by UV-Vis spectrophotometer, Raman spectroscopy, Fourier transform infrared spectroscopy, atomic force microscopy, scanning electron microscope, and transmission electron microscope. Photocatalytic performance of GTA, graphene (GR), TiO{sub 2,} and TiO{sub 2} -graphene nanocomposite (GT) were comparatively studied for degradation of methyl orange, and it was found that GTA had highest performance among all samples. More importantly, antibacterial performance of this novel composite against Gram-positive bacteria, Gram-negative bacteria, and fungus was predominant compared to GR, TiO{sub 2}, and GT. And the result of biomolecules oxidation tests suggested that antimicrobial actions were contributed by oxidation stress on both membrane and antioxidant systems. Besides, the rate of two decisive processes during photocatalytic reaction, the rate of the charge transfer (k{sub CT}) and the rate of the electron-hole recombination (k{sub R}) have been studied by Perturbation theory, Radiation theory, and Schottky barrier theory. Calculation and derivation results show that GTA possesses superior charge separation and transfer rate, which gives an explanation for the excellent oxidation properties of GTA.

60 APPLIED LIFE SCIENCES↗

Mechanical, electronic, and transport properties of functionalized graphene monolayers from ab initio studies

We present exemplary results of extensive studies of mechanical, electronic and transport properties of covalent functionalization of graphene monolayers (GML). We report new results of ab initio studies for covalent functionalization of GML with −NH{sub 2} groups up to 12.5 % concentration. Our studies are performed in the framework of the density functional theory (DFT) and non-equilibrium Green’s function (NEGF). We discuss the stability (adsorption energy), elastic moduli, electronic structure, band gaps, and effective electron masses as a function of the density of the adsorbed molecules. We also show the conductance and current – voltage I(V) characteristics for these systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamics of photoexcited carriers in monolayer epitaxial graphene probed by photoluminescence in the near-infrared region

We investigate the dynamics of photoexcited carriers in a single monolayer graphene at room temperature in air by femtosecond time-resolved luminescence measurements. The luminescence kinetics observed in the near-infrared region from 0.7 to 0.9 eV are analyzed based on the two-temperature model describing the cooling of thermalized carriers due to the carrier-optical-phonon coupling. The observed luminescence kinetics are well reproduced by the model, though the calculated electron temperature increases only to ∼420 K at the maximum, which is much lower than the optical phonon energies. This indicates the predominance of optical phonons over acoustic phonons in the carrier-phonon interaction even at a temperature of ∼400 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Note: An ion source for alkali metal implantation beneath graphene and hexagonal boron nitride monolayers on transition metals

The construction of an alkali-metal ion source is presented. It allows the acceleration of rubidium ions to an energy that enables the penetration through monolayers of graphene and hexagonal boron nitride. Rb atoms are sublimated from an alkali-metal dispenser. The ionization is obtained by surface ionization and desorption from a hot high work function surface. The ion current is easily controlled by the temperature of ionizer. Scanning Tunneling Microscopy measurements confirm ion implantation.

36 MATERIALS SCIENCE↗

Strain induced modification in phonon dispersion curves of monolayer boron pnictides

In the frame work of density functional theory, the biaxial strain induced phonon dispersion curves of monolayer boron pnictides (BX, X = N, P, As, and Sb) have been investigated. The electron-ion interactions have been modelled using ultrasoft pseudopotentials while exchange-correlation energies have been approximated by the method of local density approximation in the parameterization of Perdew-Zunger. The longitudinal and transverse acoustic phonon modes of boron pnictide sheets show linear dependency on wave vector k{sup →} while out of plane mode varies as k{sup 2}. The in-plane longitudinal and out of plane transverse optical modes in boron nitride displaying significant dispersion similar to graphene. We have analyzed the biaxial strain dependent behaviour of out of plane acoustic phonon mode which is linked to ripple for four BX sheets using a model equation with shell elasticity theory. The strain induces the hardening of this mode with tendency to become more linear with increase in strain percentage. The strain induced hardening of out of plane acoustic phonon mode indicates the absence of rippling in these compounds. Our band structure calculations for both unstrained and strained 2D h-BX are consistent with previous calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unexpected behaviour of one Pb monolayer deposited on aluminum oxide thin film grown on Ag(111)

Using scanning tunneling microscopy (STM), Auger electron spectroscopy, and low energy electron diffraction, we have observed a surprising complete dissolution at room temperature of one lead monolayer deposited by evaporation on an aluminum oxide thin film (∼0.8 nm thick) previously grown on Ag (111). We have observed the quasi-instantaneous diffusion of the lead deposit through the oxide layer to the silver/oxide interface. After the diffusion process, lead atoms form a Moiré superstructure, which is characterized by STM through the oxide layer. This unexpected behavior puts in light the very weak interaction between the aluminum oxide and the silver substrate.

36 MATERIALS SCIENCE↗

Contact-induced spin polarization of monolayer hexagonal boron nitride on Ni(111)

Hexagonal boron nitride (h-BN) is a promising barrier material for graphene spintronics. In this Letter, spin-polarized metastable de-excitation spectroscopy (SPMDS) is employed to study the spin-dependent electronic structure of monolayer h-BN/Ni(111). The extreme surface sensitivity of SPMDS enables us to elucidate a partial filling of the in-gap states of h-BN without any superposition of Ni 3d signals. The in-gap states are shown to have a considerable spin polarization parallel to the majority spin of Ni. The positive spin polarization is attributed to the π-d hybridization and the effective spin transfer to the nitrogen atoms at the h-BN/Ni(111) interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗