Results for “module generation” — Page 53

NASA NTRS2007

Inadvertent Earth Reentry Breakup Analysis for the New Horizons Mission

The New Horizons (NH) spacecraft was launched in January 2006 aboard an Atlas V launch vehicle, in a mission to explore Pluto, its moons, and other bodies in the Kuiper Belt. The NH spacecraft is powered by a Radioisotope Thermoelectric Generator (RTG) which encases multiple General Purpose Heat Source (GPHS) modules. Thus, a pre-launch vehicle breakup analysis for an inadvertent atmospheric reentry in the event of a launch failure was required to assess aerospace nuclear safety and for launch contingency planning. This paper addresses potential accidental Earth reentries analyzed at the Jet Propulsion Laboratory (JPL) which may arise during the ascent to parking orbit, resulting in a suborbital reentry, as well as a departure from parking orbit, resulting in an orbital reentry.

Ling, Lisa M.↗

NASA NTRS2003

Developing Fault Models for Space Mission Software

A viewgraph presentation on the development of fault models for space mission software is shown. The topics include: 1) Goal: Improve Understanding of Technology Fault Generation Process; 2) Required Measurement; 3) Measuring Structural Evolution; 4) Module Attributes; 5) Principal Components of Raw Metrics; 6) The Measurement Process; 7) View of Structural Evolution at the System and Module Level; 8) Identifying and Counting Faults; 9) Fault Enumeration; 10) Modeling Fault Content; 11) Modeling Results; 12) Current and Future Work; and 13) Discussion and Conclusions.

software measurements↗

NASA NTRS1993

Thin film ferroelectric electro-optic memory

An electrically programmable, optically readable data or memory cell is configured from a thin film of ferroelectric material, such as PZT, sandwiched between a transparent top electrode and a bottom electrode. The output photoresponse, which may be a photocurrent or photo-emf, is a function of the product of the remanent polarization from a previously applied polarization voltage and the incident light intensity. The cell is useful for analog and digital data storage as well as opto-electric computing. The optical read operation is non-destructive of the remanent polarization. The cell provides a method for computing the product of stored data and incident optical data by applying an electrical signal to store data by polarizing the thin film ferroelectric material, and then applying an intensity modulated optical signal incident onto the thin film material to generate a photoresponse therein related to the product of the electrical and optical signals.

Thakoor, Sarita↗

NASA NTRS2007

Terahertz lasers and amplifiers based on resonant optical phonon scattering to achieve population inversion

The present invention provides quantum cascade lasers and amplifier that operate in a frequency range of about 1 Terahertz to about 10 Terahertz. In one aspect, a quantum cascade laser of the invention includes a semiconductor heterostructure that provides a plurality of lasing modules connected in series. Each lasing module includes a plurality of quantum well structure that collectively generate at least an upper lasing state, a lower lasing state, and a relaxation state such that the upper and the lower lasing states are separated by an energy corresponding to an optical frequency in a range of about 1 to about 10 Terahertz. The lower lasing state is selectively depopulated via resonant LO-phonon scattering of electrons into the relaxation state.

Hu, Qing↗

NASA NTRS2009

Terahertz lasers and amplifiers based on resonant optical phonon scattering to achieve population inversion

The present invention provides quantum cascade lasers and amplifier that operate in a frequency range of about 1 Terahertz to about 10 Terahertz. In one aspect, a quantum cascade laser of the invention includes a semiconductor heterostructure that provides a plurality of lasing modules connected in series. Each lasing module includes a plurality of quantum well structure that collectively generate at least an upper lasing state, a lower lasing state, and a relaxation state such that the upper and the lower lasing states are separated by an energy corresponding to an optical frequency in a range of about 1 to about 10 Terahertz. The lower lasing state is selectively depopulated via resonant LO-phonon scattering of electrons into the relaxation state.

Hu, Qing↗

NASA NTRS2011

System and method for tuning adjusting the central frequency of a laser while maintaining frequency stabilization to an external reference

A method and system for stabilizing a laser to a frequency reference with an adjustable offset. The method locks a sideband signal generated by passing an incoming laser beam through the phase modulator to a frequency reference, and adjusts a carrier frequency relative to the locked sideband signal by changing a phase modulation frequency input to the phase modulator. The sideband signal can be a single sideband (SSB), dual sideband (DSB), or an electronic sideband (ESB) signal. Two separate electro-optic modulators can produce the DSB signal. The two electro-optic modulators can be a broadband modulator and a resonant modulator. With a DSB signal, the method can introduce two sinusoidal phase modulations at the phase modulator. With ESB signals, the method can further drive the optical phase modulator with an electrical signal with nominal frequency OMEGA(sub 1) that is phase modulated at a frequency OMEGA(sub 2)

Livas, Jeffrey↗

NASA NTRSDate not supplied

Thermal Protection System Design of Aerocapture Systems for Uranus Orbiters

The National Academies Planetary Science and Astrobiology Decadal Survey recently identified Uranus and Neptune - called Ice Giants - as the priority destinations for science[1]. The survey assessed both a mission to Uranus through the Uranus Orbiter and Probe (UOP) concept, and Neptune through the Neptune-Triton Odyssey concept and determined that Uranus is the highest priority for a Flagship class mission. The UOP mission will deliver an in situ probe and conduct a multi-year orbital tour of the system to meet the science objectives. While the Uranus mission is currently viable with launch windows starting in 2031 using existing launch vehicles, the mission has a long cruise time to destination (between 12 and 15 years) and would require more than half of its weight in fuel propellant to achieve the change in velocity necessary for orbital insertion. Aerocapture is a method of orbital control that uses aerodynamic forces generated on a vehicle by the planet’s atmosphere to modulate a spacecraft’s trajectory, allowing mission designers to target the final orbital state. For the Uranus mission, using aerocapture for orbital insertion can decrease not only the cruise time to the destination by 2 - 3 years, but the propellant required to achieve orbital insertion (by more than 40%) which would, in turn, increase the available science payload and reduce the timeline for retrieving data vital to the mission’s science objectives[2]. Achieving orbital insertion via aerocapture requires novel algorithms for Guidance, Navigation and Control[3], and mass-efficient Thermal Protection Systems (TPS) performing in a new atmosphere. This paper will focus on the selection and tailoring of the Thermal Protection Systems for the forebody and aftbody heatshields of an aerocapture mission to Uranus. While preliminary results indicate that multiple systems in NASA’s repertoire are capable of performing in the predicted aerothermal environment there are unique aspects like the inert environment that affect ablation efficiency, and the heatload for aerocapture trajectories to the outer planets are among the highest of any mission to-date[4]. These two factors may impose operational requirements to heatshield separation in order to minimize thermal soak to the payload, and may demand TPS thickness and configurations that have not yet been demonstrated. This paper will discuss the updated maturity, manufacturing, and performance capabilities of candidate thermal protection systems, with specific areas of need highlighted to make thermal protection systems viable for use in the recommended Uranus Orbiter and Probe mission.

Uranus↗

NASA NTRSDate not supplied

Improvements to Thermal Protection System Design of Aerocapture Systems for Uranus Orbiters

The National Academies Planetary Science and Astrobiology Decadal Survey identified Uranus and Neptune - called Ice Giants - as the priority destinations for science. The survey assessed both a mission to Uranus through the Uranus Orbiter and Probe (UOP) concept, and Neptune through the Neptune-Triton Odyssey concept and determined that Uranus is the highest priority for a Flagship class mission. The UOP mission concept planned to deliver an in situ probe and conduct a multi-year orbital tour of the system to meet the science objectives. While the Uranus mission is currently viable with launch windows starting in 2031 using existing launch vehicles, the mission has a cruise phase of at least 12 years and would require more than half of its weight in fuel propellant to achieve the change in velocity necessary for orbital insertion. Aerocapture uses aerodynamic forces generated on a vehicle by the planet's atmosphere to modulate a spacecraft's trajectory, decreasing spacecraft velocity, and allowing mission designers to target the final orbital state. Aerocapture reduces the time-of-flight from Earth to Uranus over a fully propulsive solution, opening up more launch opportunities to arrive in the 2040's to the mission's science objectives. Aerocapture also allows a payload mass increase by mitigating the need for fuel to retropropulsively insert the payload into orbit, thereby increase the science that can be performed. For an aerocapture mission structure using a traditional aeroshell to deliver the UOP scientific payload to Uranus, Conformal Phenolic Impregnated Carbon Ablator (C-PICA) was determined to be the best-performing forebody thermal protection system (TPS) and other candidate aftbody TPS options were presented as feasible. This paper focuses on A) evaluating C-PICA as a forebody TPS using stressing entry conditions associated with a large range of potential Uranus flagship launch vehicles and interplanetary trajectories, B) widening the aftbody TPS candidates for new mass-efficient and cost-efficient solutions, and C) a summary list of actions remaining to provide a technically feasible and supply-robust set of TPS for an aerocapture vehicle to the Ice Giants is presented.

C-PICA↗

NASA NTRSDate not supplied

Improvements to Thermal Protection System Design of Aerocapture Systems for Uranus Orbiters

The National Academies Planetary Science and Astrobiology Decadal Survey identified Uranus and Neptune - called Ice Giants - as the priority destinations for science. The survey assessed both a mission to Uranus through the Uranus Orbiter and Probe (UOP) concept, and Neptune through the Neptune-Triton Odyssey concept and determined that Uranus is the highest priority for a Flagship class mission. The UOP mission concept planned to deliver an in situ probe and conduct a multi-year orbital tour of the system to meet the science objectives. While the Uranus mission is currently viable with launch windows starting in 2031 using existing launch vehicles, the mission has a cruise phase of at least 12 years and would require more than half of its weight in fuel propellant to achieve the change in velocity necessary for orbital insertion. Aerocapture uses aerodynamic forces generated on a vehicle by the planet's atmosphere to modulate a spacecraft's trajectory, decreasing spacecraft velocity, and allowing mission designers to target the final orbital state. Aerocapture reduces the time-of-flight from Earth to Uranus over a fully propulsive solution, opening up more launch opportunities to arrive in the 2040's to the mission's science objectives. Aerocapture also allows a payload mass increase by mitigating the need for fuel to retropropulsively insert the payload into orbit, thereby increase the science that can be performed. For an aerocapture mission structure using a traditional aeroshell to deliver the UOP scientific payload to Uranus, Conformal Phenolic Impregnated Carbon Ablator (C-PICA) was determined to be the best-performing forebody thermal protection system (TPS) and other candidate aftbody TPS options were presented as feasible. This paper focuses on A) evaluating C-PICA as a forebody TPS using stressing entry conditions associated with a large range of potential Uranus flagship launch vehicles and interplanetary trajectories, B) widening the aftbody TPS candidates for new mass-efficient and cost-efficient solutions, and C) a summary list of actions remaining to provide a technically feasible and supply-robust set of TPS for an aerocapture vehicle to the Ice Giants is presented.

C-PICA↗

NASA NTRS1992

High efficiency low cost monolithic module for SARSAT distress beacons

The program objectives were to develop a highly efficient, low cost RF module for SARSAT beacons; achieve significantly lower battery current drain, amount of heat generated, and size of battery required; utilize MMIC technology to improve efficiency, reliability, packaging, and cost; and provide a technology database for GaAs based UHF RF circuit architectures. Presented in viewgraph form are functional block diagrams of the SARSAT distress beacon and beacon RF module as well as performance goals, schematic diagrams, predicted performances, and measured performances for the phase modulator and power amplifier.

Petersen, Wendell C.↗

NASA NTRS1980

Input/output interface module

Module detects level changes in any of its 16 inputs, transfers changes to its outputs, and generates interrupts when changes are detected. Up to four changes-in-state per line are stored for later retrieval by controlling computer. Using standard TTL logic, module fits 19-inch rack-mounted console.

Ozyazici, E. M.↗

DOE OSTI2023

Enabling scientific machine learning in MOOSE using Libtorch

A neural-network-based machine learning interface has been developed for the Multiphysics Object-Oriented Simulation Environment (MOOSE). The interface relies on Libtorch, the C++ front-end of PyTorch, and enables an online interaction between modern machine learning algorithms and all the existing simulation, modeling, and analysis processes available in MOOSE. New capabilities in MOOSE include the native generation and training of artificial neural networks together with options to load pretrained neural networks in TorchScript format. Furthermore, the MOOSE stochastic tools module (MOOSE-STM) has been enhanced with neural network-based surrogate and reduced-order model generation options for efficient stochastic analyses. Lastly, a reinforcement learning capability has been added to MOOSE-STM for the interactive control and optimization of complex multiphysics problems.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

Durable Module Materials (DuraMAT) Consortium (Final Technical Report)

The DuraMAT Consortium brings together DOE national lab and university research capabilities with the photovoltaic (PV) and supply-chain industries to accelerate a sustainable, just, and equitable transition to zero carbon electricity generation by 2035 through our five core objectives: development of a central data resource for PV modules, multi-scale and multi-physics modeling, disruptive acceleration science, forensic tools for fielded modules, and materials solutions for more durable, reliable, and resilient modules.

14 SOLAR ENERGY↗

NASA NTRS2000

Sensing device and method for measuring emission time delay during irradiation of targeted samples

An apparatus for measuring emission time delay during irradiation of targeted samples by utilizing digital signal processing to determine the emission phase shift caused by the sample is disclosed. The apparatus includes a source of electromagnetic radiation adapted to irradiate a target sample. A mechanism generates first and second digital input signals of known frequencies with a known phase relationship, and a device then converts the first and second digital input signals to analog sinusoidal signals. An element is provided to direct the first input signal to the electromagnetic radiation source to modulate the source by the frequency thereof to irradiate the target sample and generate a target sample emission. A device detects the target sample emission and produces a corresponding first output signal having a phase shift relative to the phase of the first input signal, the phase shift being caused by the irradiation time delay in the sample. A member produces a known phase shift in the second input signal to create a second output signal. A mechanism is then provided for converting each of the first and second analog output signals to digital signals. A mixer receives the first and second digital output signals and compares the signal phase relationship therebetween to produce a signal indicative of the change in phase relationship between the first and second output signals caused by the target sample emission. Finally, a feedback arrangement alters the phase of the second input signal based on the mixer signal to ultimately place the first and second output signals in quadrature. Mechanisms for enhancing this phase comparison and adjustment technique are also disclosed.

Danielson, J. D. Sheldon↗

NASA NTRS2006

Sensing device and method for measuring emission time delay during irradiation of targeted samples utilizing variable phase tracking

An apparatus for measuring emission time delay during irradiation of targeted samples by utilizing digital signal processing to determine the emission phase shift caused by the sample is disclosed. The apparatus includes a source of electromagnetic radiation adapted to irradiate a target sample. A mechanism generates first and second digital input signals of known frequencies with a known phase relationship, and a device then converts the first and second digital input signals to analog sinusoidal signals. An element is provided to direct the first input signal to the electromagnetic radiation source to modulate the source by the frequency thereof to irradiate the target sample and generate a target sample emission. A device detects the target sample emission and produces a corresponding first output signal having a phase shift relative to the phase of the first input signal, the phase shift being caused by the irradiation time delay in the sample. A member produces a known phase shift in the second input signal to create a second output signal. A mechanism is then provided for converting each of the first and second analog output signals to digital signals. A mixer receives the first and second digital output signals and compares the signal phase relationship therebetween to produce a signal indicative of the change in phase relationship between the first and second output signals caused by the target sample emission. Finally, a feedback arrangement alters the phase of the second input signal based on the mixer signal to ultimately place the first and second output signals in quadrature. Mechanisms for enhancing this phase comparison and adjustment technique are also disclosed.

Danielson, J. D. Sheldon↗

NASA NTRS2008

Airbag Landing Impact Performance Optimization for the Orion Crew Module

This report will discuss the use of advanced simulation techniques to optimize the performance of the proposed Orion Crew Module airbag landing system design. The Boeing Company and the National Aeronautic and Space Administration s Langley Research Center collaborated in the analysis of the proposed airbag landing system for the next generation space shuttle replacement, the Orion spacecraft. Using LS-DYNA to simulate the Crew Module landing impacts, two main objectives were established and achieved: the investigation of potential methods of optimizing the airbag performance in order to reduce rebound on the anti-bottoming bags, lower overall landing loads, and increase overall Crew Module stability; and the determination of the Crew Module stability and load boundaries using the optimized airbag design, based on the potential Crew Module landing pitch angles and ground slopes in both the center of gravity forward and aft configurations. This paper describes the optimization and stability and load boundary studies and presents a summary of the results obtained and key lessons learned from this analysis.

Lee, Timothy J.↗

NASA NTRSDate not supplied

Waveform Modulation of Locked PIC Lasers for Microwave Photonic Radars

In a conventional radar or radiometer system, microwave or millimeter-wave signals are generated, distributed, and processed using electronic components that have considerable size, weight, and power (SWaP) and are typically limited in bandwidth and immunity to electromagnetic interference. Radar waveform modulation was achieved via phase and amplitude modulation of one of the two mixed laser signals enabling the use of highly developed photonic modulation technology.

Victor Torres↗

NASA NTRS2005

An Overview and Status of NASA's Radioisotope Power Conversion Technology NRA

NASA's Advanced Radioisotope Power Systems (RPS) development program is developing next generation radioisotope power conversion technologies that will enable future missions that have requirements that can not be met by either photovoltaic systems or by current Radioisotope Power System (RPS) technology. The Advanced Power Conversion Research and Technology project of the Advanced RPS development program is funding research and technology activities through the NASA Research Announcement (NRA) 02- OSS-01, "Research Opportunities in Space Science 2002" entitled "Radioisotope Power Conversion Technology" (RPCT), 13 August 2002. The objective of the RPCT NRA is to advance the development of radioisotope power conversion technologies to provide significant improvements over the state-of-practice General Purpose Heat Source/Radioisotope Thermoelectric Generator by providing significantly higher efficiency to reduce the number of radioisotope fuel modules, and increase specific power (watts/kilogram). Other Advanced RPS goals include safety, long-life, reliability, scalability, multi-mission capability, resistance to radiation, and minimal interference with the scientific payload. These advances would enable a factor of 2 to 4 decrease in the amount of fuel required to generate electrical power. The RPCT NRA selected advanced RPS power conversion technology research and development proposals in the following three areas: innovative RPS power conversion research, RPS power conversion technology development in a nominal 100We scale; and, milliwatt/multi-watt RPS (mWRPS) power conversion research. Ten RPCT NRA contracts were awarded in 2003 in the areas of Brayton, Stirling, thermoelectric (TE), and thermophotovoltaic (TPV) power conversion technologies. This paper will provide an overview of the RPCT NRA, and a brief summary of accomplishments over the first 18 months but focusing on advancements made over the last 6 months.

Anderson, David J.↗