SEARCH · Engineering Papers

Results for “model comparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

All sources NASA NTRS DOE OSTI

NASA NTRS2017

Atmospheric Modeling Using Accelerometer Data During Mars Atmosphere and Volatile Evolution (MAVEN) Flight Operations

The Mars Atmosphere and Volatile EvolutioN (MAVEN) spacecraft is a NASA orbiter designed to explore the Mars upper atmosphere, typically from 140 to 160 km altitude. In addition to the nominal science mission, MAVEN has performed several Deep Dip campaigns in which the orbit's closest point of approach, also called periapsis, was lowered to an altitude range of 115 to 135 km. MAVEN accelerometer data were used during mission operations to estimate atmospheric parameters such as density, scale height, along-track gradients, and wave structures. Density and scale height estimates were compared against those obtained from the Mars Global Reference Atmospheric Model and used to aid the MAVEN navigation team in planning maneuvers to raise and lower periapsis during Deep Dip operations. This paper describes the processes used to reconstruct atmosphere parameters from accelerometers data and presents the results of their comparison to model and navigation-derived values.

Tolson, Robert H.↗

NASA NTRS1989

An analysis of the effects of N2 absorption on the O(+) 834-A emission from rocket observations

Altitude profiles of the O(+) 834-A emission, obtained from rocket observations at moderate and high solar conditions, are compared with model calculations. The model showed that when viewing the atmosphere horizontally at altitudes below the F2 layer, the 834-A intensity was virtually independent of the O(+) density. The 834-A intensity was found to be highly sensitive to the N2 absorption cross section. Comparisons with model calculations suggest that absorption by N2 is a factor of 10 lower than the currently accepted values.

Cleary, D. D.↗

NASA NTRS2014

Satellite-Model-Ground-based Inter-Comparisons (WG-3)

AERO-SAT is an international consortium of experts on aerosol remote sensing from ground and space. This initiative was established in 2013 (1) to accelerate the exchange of ideas and concepts and (2) to elevate the capabilities of satellite sensorsretrieval (aerosol) products, which are needed to constrain aerosol processing in and assist in evaluations of global modeling. The main goal of the meeting is to substantiate and invigorate the five AEROSAT working groups. On each of those five topics dedicated working groups are building up and will report on their initial activities followed by further related presentations and ample time for discussions. Organizers of the meeting held September 27-28, 2014 would like to post the presentations to a website.

satellite remote sensing↗

NASA NTRS1983

Io escape and ionization of atmospheric gases

Exploratory model calculations for the Io atomic oxygen cloud have provided two-dimensional sky-plane intensities for the 6300 A, 1304 A and 880 A lines, where volume excitation and ionization rates are determined by impact collisions with Io plasma torus electrons. Comparison of model results with observations at 6300 A suggests an isotropic oxygen flux from Io of about 1.5x109 atoms 1 sq cm/sec. The effects of including a neutral sulfur cloud and also of including charge exchange reactions between plasma torus ions and neutral OI and SI were evaluated to be significant and were roughly estimated to increase the required oxygen flux to 1.2 x 10 to the 10th atoms/sq cm/sec. In addition, increases in the estimates for the ion loading, cloud mass loss, plasma mass loading and ion energy input rates were also made. Model calculations for an Io sulfur cloud, excluding charge exchange reactions but assuming an SI flux of 7.5 x 10 to the 8th atoms/sq cm/sec (i.e., half of the oxygen flux), were also performed and provided sky plane intensities for a number of visible and IR emission lines.

Smyth, W. H.↗

NASA NTRS1994

Multivariate space - time analysis of PRE-STORM precipitation

This paper presents the methodologies and results of the multivariate modeling and two-dimensional spectral and correlation analysis of PRE-STORM rainfall gauge data. Estimated parameters of the models for the specific spatial averages clearly indicate the eastward and southeastward wave propagation of rainfall fluctuations. A relationship between the coefficients of the diffusion equation and the parameters of the stochastic model of rainfall fluctuations is derived that leads directly to the exclusive use of rainfall data to estimate advection speed (about 12 m/s) as well as other coefficients of the diffusion equation of the corresponding fields. The statistical methodology developed here can be used for confirmation of physical models by comparison of the corresponding second-moment statistics of the observed and simulated data, for generating multiple samples of any size, for solving the inverse problem of the hydrodynamic equations, and for application in some other areas of meteorological and climatological data analysis and modeling.

Polyak, Ilya↗

NASA NTRS2019

Assessment of Aeroacoustic Simulations of the High-Lift Common Research Model

This paper presents further validation of PowerFLOWR aeroacoustic simulations of the High-Lift Common Research Model through comparisons with experimental data from a recently completed wind tunnel test. Preliminary time- averaged surface pressure and microphone array data from the experiment are in reasonably good agreement with the simulations, and the slat is shown to be a dominant noise source on this model. The simulations did not predict slat tones that were very prominent in the experiment, but they did capture the broadband component of slat noise in the low-frequency range up to 1 kHz at full scale. Future tests are planned to demonstrate slat noise reduction technology, and simulations are being used to guide this development.

Lockard, David P.↗

NASA NTRS1977

Prediction of pilot reserve attention capacity during air-to-air target tracking

Reserve attention capacity of a pilot was calculated using a pilot model that allocates exclusive model attention according to the ranking of task urgency functions whose variables are tracking error and error rate. The modeled task consisted of tracking a maneuvering target aircraft both vertically and horizontally, and when possible, performing a diverting side task which was simulated by the precise positioning of an electrical stylus and modeled as a task of constant urgency in the attention allocation algorithm. The urgency of the single loop vertical task is simply the magnitude of the vertical tracking error, while the multiloop horizontal task requires a nonlinear urgency measure of error and error rate terms. Comparison of model results with flight simulation data verified the computed model statistics of tracking error of both axes, lateral and longitudinal stick amplitude and rate, and side task episodes. Full data for the simulation tracking statistics as well as the explicit equations and structure of the urgency function multiaxis pilot model are presented.

Onstott, E. D.↗

NASA NTRS1982

Integrated and spectral energetics studies of the GLAS general circulation model

Integrated and spectral energetics of the Goddard Laboratory for Atmospheric Sciences (GLAS) general circulation model are compared with observations and examined when subdivided beyond hemispheric integrals. In the monthly mean zonal averages, qualitative improvements are found over previous versions of the model in eddy kinetic energy and barotropic conversions although vertical shear above the subtropical jet remains weak. This paper traces this problem to the erroneous growth of kinetic energy above strong jets, shows that this difficulty is common to all orographic general circulation models, and suggests that this problem has significant effects on upper-level long-wave predictability. In particular, it is considered whether hemispherically integrated kinetic energy or low-wavenumber spectral coefficients retain any skill as the predictability limit. In the time-dependent comparisons, the model shows significant skill in predicting the hemispherically integrated eddy kinetic energy out to two weeks for one of two cases.

Tenenbaum, J.↗

NASA NTRS2002

Anomalous Heat Budgets in the Interior Pacific Ocean on Seasonal- to -Timescales and Gyre Spacescales

This study quantifies uncertainties in closing the seasonal cycle of diabatic heat storage over the Pacific Ocean from 20 degrees S to 60 degrees N through the synthesis of World Ocean Circulation Experiment (WOCE) products over 7 years from 1993-1999. We utilize WOCE reanalysis products from the following sources: diabatic heat storage (DHS) from the Scripps Institution of Oceanography (SIO); near-surface geostrophic and Ekman currents from the Earth and Space Research (ESR); and air-sea heat fluxes from Comprehensive Ocean-Atmosphere Data Set (COADS), National Centers for Environmental Prediction (NCEP), and European Center for Mid-Range Weather Forecasts (ECMWF). We interpolate these products onto a common grid, allowing the seasonal cycle of DHS to be modeled for comparison with that observed. Everywhere latent heat flux residuals dominate sensible heat flux residuals and shortwave heat flux residuals dominate longwave heat flux residuals, both comparable in magnitude to the residual horizontal heat advection. We find the root-mean-square (RMS) of the differences between observed and model residual DHS tendencies to be less than 15 W per square meters everywhere except in the Kuroshio extension. Comparable COADS and NCEP products perform better than ECMWF products in the extra-tropics, while the NCEP product performs best in the tropics. Radiative and turbulent air-sea heat flux residuals computed from ship-born measurements perform better than those computed from satellite cloud and wind measurements. Since the RMS differences derive largely from biases in measured wind speed and cloud fraction, least-squares minimization is used to correct the residual Ekman heat advection and air-sea heat flux. Minimization reduces RMS differences less than 5 W per square meters except in the Kuroshio extension, suggesting how winds, clouds, and exchange coefficients in the NCEP, ECMWF, and ESR products can be improved.

White, Warren↗

NASA NTRS1989

Modeling and observation of the radar polarization signature of forested areas

To understand radar measurements of forested areas, the authors have developed a model of L-band (25-cm) microwave scattering from a forest. The forest floor is modeled as a rough dielectric surface above which is a layer of nearly vertical dielectric cylinders representing tree trunks. Above this layer is a second layer consisting of randomly oriented cylinders which represent branches. The authors identify several scattering mechanisms and calculate the corresponding Stokes matrices, which combine to give the total Stokes matrix and resulting polarization signature. It is found that this simple model permits accurate prediction of the polarization of the scattered waves and that additional mechanisms, including the effects of leaves and twigs, are not required for the 25-cm observation of the forests studied. The authors present measurements of the polarization signature acquired over a forested area and show comparisons with model calculations.

Durden, Stephen L.↗

NASA NTRS1994

Evolution of solitary density waves in stellar winds of early-type stars: A simple explanation of discrete absorption component behavior

We model the evolution of a density shell propagating through the stellar wind of an early-type star, in order to investigate the effects of such shells on UV P Cygni line profiles. Unlike previous treatments, we solve the mass, momentum, and energy conservation equations, using an explicit time-differencing scheme, and present a parametric study of the density, velocity, and temperature response. Under the assumed conditions, relatively large spatial scale, large-amplitude density shells propagate as stable waves through the supersonic portion of the wind. Their dynamical behavior appears to mimic propagating 'solitary waves,' and they are found to accelerate at the same rate as the underlying steady state stellar wind (i.e., the shell rides the wind). These hydrodynamically stable structures quantitatively reproduce the anomalous 'discrete absorption component' (DAC) behavior observed in the winds of luminous early-type stars, as illustrated by comparisons of model predictions to an extensive International Ultraviolet Explorer (IUE) time series of spectra of zeta Puppis (O4f). From these comparisons, we find no conclusive evidence indicative of DACs accelerating at a significantly slower rate than the underlying stellar wind, contrary to earlier reports. In addition, these density shells are found to be consistent within the constraints set by the IR observations. We conclude that the concept of propagating density shells should be seriously reconsidered as a possible explanation of the DAC phenomenon in early-type stars.

Waldron, Wayne L.↗

NASA NTRS2002

Measurement and Computation of Supersonic Flow in a Lobed Diffuser-Mixer for Trapped Vortex Combustors

The trapped vortex combustor (TVC) pioneered by Air Force Research Laboratories (AFRL) is under consideration as an alternative to conventional gas turbine combustors. The TVC has demonstrated excellent operational characteristics such as high combustion efficiency, low NO(x) emissions, effective flame stabilization, excellent high-altitude relight capability, and operation in the lean-burn or rich burn-quick quench-lean burn (RQL) modes of combustion. It also has excellent potential for lowering the engine combustor weight. This performance at low to moderate combustor mach numbers has stimulated interest in its ability to operate at higher combustion mach number, and for aerospace, this implies potentially higher flight mach numbers. To this end, a lobed diffuser-mixer that enhances the fuel-air mixing in the TVC combustor core was designed and evaluated, with special attention paid to the potential shock system entering the combustor core. For the present investigation, the lobed diffuser-mixer combustor rig is in a full annular configuration featuring sixfold symmetry among the lobes, symmetry within each lobe, and plain parallel, symmetric incident flow. During hardware cold-flow testing, significant discrepancies were found between computed and measured values for the pitot-probe-averaged static pressure profiles at the lobe exit plane. Computational fluid dynamics (CFD) simulations were initiated to determine whether the static pressure probe was causing high local flow-field disturbances in the supersonic flow exiting the diffuser-mixer and whether shock wave impingement on the pitot probe tip, pressure ports, or surface was the cause of the discrepancies. Simulations were performed with and without the pitot probe present in the modeling. A comparison of static pressure profiles without the probe showed that static pressure was off by nearly a factor of 2 over much of the radial profile, even when taking into account potential axial displacement of the probe by up to 0.25 in. (0.64 cm). Including the pitot probe in the CFD modeling and data interpretation lead to good agreement between measurement and prediction. Graphical inspection of the results showed that the shock waves impinging on the probe surface were highly nonuniform, with static pressure varying circumferentially among the pressure ports by over 10 percent in some cases. As part of the measurement methodology, such measurements should be routinely supplemented with CFD analyses that include the pitot probe as part of the flow-path geometry.

Brankovic, Andreja↗

NASA NTRS2019

The Peculiar Volatile Composition of CO-Dominated Comet C/2016 R2 (PanSTARRS)

Comet C/2016 R2 (PanSTARRS) has a peculiar volatile composition, with CO being the dominant volatile, as opposed to H2O, and one of the largest N2/CO ratios ever observed in a comet. Using observations obtained with the Spitzer Space Telescope, NASA’s Infrared Telescope Facility, the 3.5 m Astrophysical Research Consortium telescope at Apache Point Observatory, the Discovery Channel Telescope at Lowell Observatory, and the Arizona Radio Observatory 10 m Submillimeter Telescope, we quantified the abundances of 12 different species in the coma of R2 PanSTARRS: CO, CO2, H2O, CH4, C2H6, HCN, CH3OH, H2CO, OCS, C2H2, NH3, and N2. We confirm the high abundances of CO and N2 and heavy depletions of H2O, HCN, CH3OH, and H2CO compared to CO reported by previous studies. We provide the first measurements (or most sensitive measurements/constraints) on H2O, CO2, CH4, C2H6, OCS, C2H2, and NH3, all of which are depleted relative to CO by at least 1–2 orders of magnitude compared to values commonly observed in comets. The observed species also show strong enhancements relative to H2O, and, even when compared to other species like CH4 or CH3OH, most species show deviations from typical comets by at least a factor of 2–3. The only mixing ratios found to be close to typical are CH3OH/CO2 and CH3OH/CH4. The CO2/CO ratio is within a factor of 2 of those observed for C/1995 O1 (Hale- Bopp) and C/2006 W3 (Christensen) at a similar heliocentric distance, though it is at least an order of magnitude lower than many other comets observed with AKARI. While R2 PanSTARRS was located at a heliocentric distance of 2.8 au at the time of our observations in 2018 January/February, we argue, using sublimation models and comparison to other comets observed at similar heliocentric distance, that this alone cannot account for the peculiar observed composition of this comet and therefore must reflect its intrinsic composition. We discuss possible implications for this clear outlier in compositional studies of comets obtained to date and encourage future dynamical and chemical modeling in order to better understand what the composition of R2 PanSTARRS tells us about the early solar system.

McKay, Adam J.↗

NASA NTRS2010

Improving a Spectral Bin Microphysical Scheme Using TRMM Satellite Observations

Comparisons between cloud model simulations and observations are crucial in validating model performance and improving physical processes represented in the mod Tel.hese modeled physical processes are idealized representations and almost always have large rooms for improvements. In this study, we use data from two different sensors onboard TRMM (Tropical Rainfall Measurement Mission) satellite to improve the microphysical scheme in the Goddard Cumulus Ensemble (GCE) model. TRMM observed mature-stage squall lines during late spring, early summer in central US over a 9-year period are compiled and compared with a case simulation by GCE model. A unique aspect of the GCE model is that it has a state-of-the-art spectral bin microphysical scheme, which uses 33 different bins to represent particle size distribution of each of the seven hydrometeor species. A forward radiative transfer model calculates TRMM Precipitation Radar (PR) reflectivity and TRMM Microwave Imager (TMI) 85 GHz brightness temperatures from simulated particle size distributions. Comparisons between model outputs and observations reveal that the model overestimates sizes of snow/aggregates in the stratiform region of the squall line. After adjusting temperature-dependent collection coefficients among ice-phase particles, PR comparisons become good while TMI comparisons worsen. Further investigations show that the partitioning between graupel (a high-density form of aggregate), and snow (a low-density form of aggregate) needs to be adjusted in order to have good comparisons in both PR reflectivity and TMI brightness temperature. This study shows that long-term satellite observations, especially those with multiple sensors, can be very useful in constraining model microphysics. It is also the first study in validating and improving a sophisticated spectral bin microphysical scheme according to long-term satellite observations.

Li, Xiaowen↗

NASA NTRSDate not supplied

The Satellite Flythrough and Reconstruction Softwares at CCMC

The next-generation of model data visualization to be offered at the Community Coordinated Modeling Center (CCMC) will be based on Kamodo, an open source python package. To increase the usefulness of our services, we are also developing new capabilities based on this software, called the satellite flythrough and the reconstruction tools, to be offered both as packages for offline analysis and through an online interface (coming soon). The satellite flythrough software ‘flies’ a satellite trajectory, whether real or imaginary, through either model data hosted at CCMC or on a personal machine. This service greatly simplifies the complexity of users’ access to model data, abstracting away the time-consuming details of model data formats and interpolation. We demonstrate execution times of a few seconds to a few minutes for several example flythroughs of a trajectory stretching over a few days, depending on the parameters chosen. We also demonstrate a reconstruction tool built on top of the satellite flythrough software, for use with mission planning and model-data comparisons. This tool, based on reconstructions provided for the GDC Science and Technology Definition Team, converts multiple, simultaneous satellite flythroughs into two-dimensional reconstructions. The reconstruction tool provides a software capability for satellite constellations to determine how many satellites are needed and in what configuration to resolve the desired features in the model data. Both tools are currently available through GitHub for a selection of CCMC-hosted ITM models. Finally, we present initial results from work in progress and plans for future work, including an expansion of the reconstruction tool to provide 3D reconstruction capabilities and a line-of-sight calculation tool.

software, python↗

NASA NTRS1988

Constitutive modeling for isotropic materials

The third and fourth years of a 4-year research program, part of the NASA HOST Program, are described. The program goals were: (1) to develop and validate unified constitutive models for isotropic materials, and (2) to demonstrate their usefulness for structural analysis of hot section components of gas turbine engines. The unified models selected for development and evaluation were those of Bodner-Partom and of Walker. The unified approach for elastic-viscoplastic constitutive equations is a viable method for representing and predicting material response characteristics in the range where strain rate and temperature dependent inelastic deformations are experienced. This conclusion is reached by extensive comparison of model calculations against the experimental results of a test program of two high temperature Ni-base alloys, B1900+Hf and Mar-M247, over a wide temperature range for a variety of deformation and thermal histories including uniaxial, multiaxial, and thermomechanical loading paths. The applicability of the Bodner-Partom and the Walker models for structural applications has been demonstrated by implementing these models into the MARC finite element code and by performing a number of analyses including thermomechanical histories on components of hot sections of gas turbine engines and benchmark notch tensile specimens. The results of the 4-year program have been published in four annual reports. The results of the base program are summarized in this report. The tasks covered include: (1) development of material test procedures, (2) thermal history effects, and (3) verification of the constitutive model for an alternative material.

Chan, K. S.↗

NASA NTRS2000

Sea Ice Motion from Wavelet Analysis of Satellite Data

Wavelet analysis of NASA scatterometer (NSCAT) backscatter and Defense Meteorological Satellite Program (DMSP) Special Sensor Microwave/Imager (SSM/I) radiance data can be used to obtain daily sea ice drift information for the Arctic region. This technique provides improved spatial coverage over the existing array of Arctic Ocean buoys and better temporal resolution over techniques utilizing data from satellite synthetic aperture radars. Comparisons with ice motion derived from ocean buoys give good quantitative agreement. Both comparison results from NSCAT and SSM/I are compatible, and the results from NSCAT can definitely complement that from SSM/I when there are cloud or surface effects. Then three sea-ice drift daily results from NSCAT, SSM/I, and buoy data can be merged as a composite map by some data fusion techniques. The ice flow streamlines are highly correlated with surface air pressure contours. Examples of derived ice-drift maps in December 1996 illustrate large-scale circulation reversals over a period of four days. A method for deriving divergence and shear at the large-scale has been developed and comparison between buoys and satellite results shows a good agreement. These calibrated/validated results indicate that NSCAT, SSM/I merged daily ice motion are suitably accurate to identify and closely locate sea ice processes, and to improve our current knowledge of sea ice drift and related processes through the data assimilation of ocean-ice numerical model. For demonstration purpose, the ice velocities derived from satellite data are compared with the ice velocities derived from a coupled ice-ocean interaction model. The comparison reveals that the general circulation patterns of the two are quite similar but the ice velocity differences between the two are quite significant. In order to quantify the wind effects on ice motion, empirical orthogonal functions (EOF) are used in the principal component analysis for both ice motion and pressure field. Some preliminary results of sea-ice motion from QuikScat will also be presented.

Liu, Antony K.↗

NASA NTRS2001

Quantitative molecular characterization of bovine vitreous and lens with non-invasive dynamic light scattering

The non-invasive technique of dynamic light scattering (DLS) was used to quantitatively characterize vitreous and lens structure on a molecular level by measuring the sizes of the predominant particles and mapping the three-dimensional topographic distribution of these structural macromolecules in three spatial dimensions. The results of DLS measurements in five fresh adult bovine eyes were compared to DLS measurements in model solutions of hyaluronan (HA) and collagen (Coll). In the bovine eyes DLS measurements were obtained from excised samples of gel and liquid vitreous and compared to the model solutions. Measurements in whole vitreous were obtained at multiple points posterior to the lens to generate a three-dimensional 'map' of molecular structure. The macromolecule distribution in bovine lens was similarly characterized.In each bovine vitreous (Bo Vit) specimen, DLS predominantly detected two distinct particles, which differed in diffusion properties and hence size. Comparisons with model vitreous solutions demonstrated that these most likely corresponded to the Coll and HA components of vitreous. Three-dimensional mapping of Bo Vit found heterogeneity throughout the vitreous body, with different particle size distributions for Coll and HA at different loci. In contrast, the three-dimensional distribution of lens macromolecules was more homogeneous. Thus, the non-invasive DLS technique can quantitate the average sizes of vitreous and lens macromolecules and map their three-dimensional distribution. This method to assess quantitatively the macromolecular structure of vitreous and lens should be useful for clinical as well as experimental applications in health and disease. Copyright 2001 Academic Press.

Models, Molecular↗