Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mill”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Immediate Deployment of Waste Energy Technologies at Multiple Sites

Verso Paper Corp. implemented a portfolio of 13 commercially available proven industrial technologies each exceeding 30% minimum threshold efficiency and at least 25% efficiency increase. These sub-projects are a direct result of a grant received from the Department of Energy (DOE) through its FOA 0000044 (Deployment of Combined Heat and Power (CHP) Systems, District Energy Systems, Waste Energy Recovery Systems, and Efficient Industrial Equipment), which was funded by the American Recovery Act. These were installed at 3 sites in 2 states and are helping to reduce Verso costs, making the facilities more competitive. This created approximately 100 construction jobs (FTE’s) and reduced impacted Verso facilities’ expense budgets. These sub-projects were deployed at Verso paper mills located in Jay, Maine, Bucksport, Maine, and Sartell, Minnesota. The paper mills are the economic engines of the rural communities in which these mills are located. Reinvestment in waste energy recovery capital improvements is providing a stimulus to help maintain domestic jobs and to competitively position the US pulp and paper industry with rising energy costs. Energy efficiency improvements are also providing a positive environmental impact by reducing greenhouse gas emissions, the quantity of wastewater treated and discharged, and fossil fuel demand. As a result of these projects, when fully operating, Verso realized a total of approximately 1.5 TBtu/Year reduction in overall energy consumption, which is 119% of the project objectives. Note that three paper machines have since been permanently curtailed. However even with these shutdowns, the company still met its energy objectives. Note also that the Sartell mill’s paper machine is down due to a recent fire which damaged the mill’s electrical infrastructure (the company has not decided on the mill’s future).

distributed energy, combined heat and power, CHP, ↗

System and method of forming nanostructured ferritic alloy

A system for mechanical milling and a method of mechanical milling are disclosed. The system includes a container, a feedstock, and milling media. The container encloses a processing volume. The feedstock and the milling media are disposed in the processing volume of the container. The feedstock includes metal or alloy powder and a ceramic compound. The feedstock is mechanically milled in the processing volume using metallic milling media that includes a surface portion that has a carbon content less than about 0.4 weight percent.

36 MATERIALS SCIENCE↗

Silicon-silicon oxide-carbon composites for lithium battery electrodes and methods for forming the composites

Composite silicon based materials are described that are effective active materials for lithium ion batteries. The composite materials comprise processed, e.g., high energy mechanically milled, silicon suboxide and graphitic carbon in which at least a portion of the graphitic carbon is exfoliated into graphene sheets. The composite materials have a relatively large surface area, a high specific capacity against lithium, and good cycling with lithium metal oxide cathode materials. The composite materials can be effectively formed with a two step high energy mechanical milling process. In the first milling process, silicon suboxide can be milled to form processed silicon suboxide, which may or may not exhibit crystalline silicon x-ray diffraction. In the second milling step, the processed silicon suboxide is milled with graphitic carbon. Composite materials with a high specific capacity and good cycling can be obtained in particular with balancing of the processing conditions.

Anguchamy, Yogesh Kumar↗

Methods for forming silicon-silicon oxide-carbon composites for lithium ion cell electrodes

Composite silicon based materials are described that are effective active materials for lithium ion batteries. The composite materials comprise processed, e.g., high energy mechanically milled, silicon suboxide and graphitic carbon in which at least a portion of the graphitic carbon is exfoliated into graphene sheets. The composite materials have a relatively large surface area, a high specific capacity against lithium, and good cycling with lithium metal oxide cathode materials. The composite materials can be effectively formed with a two-step high energy mechanical milling process. In the first milling process, silicon suboxide can be milled to form processed silicon suboxide, which may or may not exhibit crystalline silicon x-ray diffraction. In the second milling step, the processed silicon suboxide is milled with graphitic carbon. Composite materials with a high specific capacity and good cycling can be obtained in particular with balancing of the processing conditions.

Anguchamy, Yogesh Kumar↗

Green synthesis of cellulose formate and its efficient conversion into 5-hydroxymethylfurfural

5-hydroxymethylfurfural (HMF) production from cellulose is a hot topic, while the rigidity of cellulose limits its efficient conversion into HMF. Cellulose formate has exhibited the great potential for HMF production but it’s synthesis via direct formylation of cellulose in formic acid is difficult. We reported a green synthetic route of cellulose formate and its efficient conversion into HMF. Ball milled cellulose formate (BCF) was synthesized via ball milling followed by formylation in formic acid at 80 °C for 0.5 h. The structure of BCF was thoroughly characterized and BCF was subsequently converted to HMF catalyzed by AlCl3 and HCl in dimethyl sulfoxide (DMSO)-H 2 O media. Results showed that ball milling of cellulose for 1–1.5 h efficiently deconstructed its crystallinity and degree of polymerization, boosting its further formylation and catalytic conversion. An overall 66.9% HMF yield from cellulose was achieved at 150 °C for 20 min using BCF derived from cellulose ball milled for 1.5 h as the substrate. BCF exhibits high reactivity toward HMF due to its excellent solubility and accessibility in DMSO-H 2 O media, and the release of formic acid in reaction further facilitates HMF production. BCF synthesized with different ball milling times shows different degrees of substitution of formyl groups, which could serve as an indicator and regulate the HMF production. The green synthesis of cellulose formate creates an efficient pathway for HMF production.

5-hydroxymethylfurfural↗

Mechanochemical synthesis of tungsten carbide nano particles by using WO{sub 3}/Zn/C powder mixture

Graphical abstract: Display Omitted Highlights: ► Nano particles of WC are synthesized by mechanochemical process. ► Zn was used to reduce WO{sub 3}. ► By removing ZnO from the milling products with an acid leaching, WC will be the final products. ► XRD results showed that the reduction reactions were completed after 36 h. ► TEM and SEM images showed that the morphology of produced powder is nearly spherical like. -- Abstract: In this research we introduce a new, facile, and economical system for fabrication of tungsten carbide (WC) nano particle powder. In this system WO{sub 3}, Zn, and C have been ball-milled for several hours, which led to the synthesis of tungsten carbide nano particles. The synthesized WC can successfully be separated from the ball-milled product by subjecting the product powder to diluted HCl for removing ZnO and obtaining WC. X-ray diffraction (XRD) analysis indicates that the reduction of WO{sub 3} will be completed gradually by increasing milling time up to 36 h. Scanning electron microscope (SEM), and transmission electron microscope (TEM) images show that after 36 h of milling the particle size of the fabricated powder is nano metric (about 20 nm). Results have shown that this system can surmount some main problems occurred in previous similar WC synthesizing systems. For example carbothermic reduction reactions, which lead to the synthesis of W{sub 2}C instead of WC, would not be activated because in this system reactions take place gradually.

36 MATERIALS SCIENCE↗

Restoring freshwater habitat mosaics to promote resilience of vulnerable salmon populations

Phenotypic diversity and abundance drive salmon resilience in the face of increasing environmental variability. But what happens when human activities fundamentally alter the habitat complexity that drives this diversity? And how can we restore habitats to recover both diversity and abundance to support salmon persistence in a warming climate? Here, we looked at the impact of a large watershed restoration effort on the abundance and climate resilience of the three remaining core natural spring-run Chinook Salmon populations in the California Central Valley (Butte, Mill, and Deer Creek). Butte Creek fish, which have floodplain access, had higher overall productivity and faster juvenile growth compared with Mill and Deer Creek populations, and the proportion of floodplain inundation was positively correlated with Butte Creek adult abundance two years later. While Butte Creek exhibited significant increases in abundance post-restoration (~2000%), it generally exhibited lower phenotypic diversity and only a marginal increase in population stability after restoration based on the coefficient of variation (CV). In particular, Butte Creek salmon tended to exhibit larger drops in escapement following dry years (e.g., return years 2010, 2017) compared with Mill and Deer Creek populations, presumably due to limited inundation of its downstream floodplain. The late-migrating juvenile strategy (i.e., yearling), which disproportionately supported Mill and Deer Creek populations during droughts, was uncommon among Butte Creek adults (averaging 60% of returns for Mill and Deer Creek vs. 0.3% for Butte Creek). Increased spring-run stock complex stability was found, post-restoration, when combining the three spring-run populations (i.e., lower aggregate CV). However, among-river pairwise correlations also suggested increased synchronization in population abundances post-restoration, potentially due to increasing frequency and severity of extreme climatic events (e.g., droughts and ocean warming). This study underscores the importance of restoring a connected mosaic of aquatic habitats across modified landscapes, such as cold water refugia and floodplains, to preserve multiple (across-population) life history pathways for increasing salmon stock complex stability and abundance. These landscape-scale process-based habitat restoration efforts are likely to be crucial for the successful long-term recovery of vulnerable species in a rapidly changing climate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure and Electrochemical Performance of CeMg{sub 12}/Ni/TiF{sub 3} Composites for Hydrogen Storage

Ball milling was used to prepare CeMg{sub 12}/Ni/TiF{sub 3} composite alloys in this study. Microstructures of experimental alloys were analyzed by scanning electron microcopy (SEM), x-ray diffraction (XRD), and high-resolution transmission electron microscopy (HRTEM) with electron diffraction (ED). The electrochemical and kinetic characteristics of the ball-milled composite alloys were further evaluated based on their galvanostatic charge–discharge measurement, high-rate dischargeability (HRD), hydrogen diffusion behavior, as well as electrochemical impedance spectrum (EIS). Results indicated that the ball-milled alloy with 3 wt.% TiF{sub 3} exhibited the best electrochemical discharge capacity, which was not only related to the formation of amorphous and/or nanocrystalline phase but to the formation of MgF{sub 2} because it can effectively reduce the thermodynamic stability of hydride. With increasing TiF{sub 3}, the cycle degradation rates of the milled alloys were ameliorated remarkably. This improvement was attributed to the formation of an amorphous phase (which possesses strong anticorrosive and antioxidation abilities) as well as the formation of MgF{sub 2} and TiNi secondary phases. The ball-milled alloy with 3 wt.% TiF{sub 3} additive exhibited the strongest electrochemical kinetic properties, related to the highest hydrogen diffusion rate in the alloy (which was associated with multiple defects and grain boundary of amorphous and/or nanocrystalline phases) and the electrochemical reaction on the surface of alloy (which was related to the lowest apparent activation energy).

36 MATERIALS SCIENCE↗

Novel processing route for design and manufacturing of metal toughened nanoceramics: Al–Al 2 O 3 nanocermets

Monolithic alumina is a highly brittle ceramic with a very low fracture toughness, making it an unreliable material for mechanical and structural applications. Ceramic-metal composites (cermets) are the subject of intensive interest to obtain materials which can address the intrinsic brittleness of ceramics without compromising their high strength and light weight. In the present investigation, aluminium-alumina (Al–Al 2 O 3 ) nanocermets were developed. The nanocermets possessed the toughness of Al phase and the strength of reinforced nano Al 2 O 3 particles. Here, the nanocermets green bodies were prepared such that upon sintering each adjacent Al 2 O 3 grain was conformally coated with a continuous Al film. Mechanical milling via a combination of cryo-milling and ball-milling was used to prepare Al–Al 2 O 3 nano-powder mixture. Spark plasma sintering was used to consolidate the green nanocermets. Results show that specimens prepared from 35 h milled powders exhibited superior mechanical properties as compared to other nanocermets, with an improvement in microhardness, elastic modulus, compressive strength, and flexural strength by 88%, 78%, 69% and 40% with respect to sintered pure Al. The indentation toughness of 35 h milled nanocermet showed an increment of 12.5% with respect to sintered pure Al 2 O 3 . Characterization techniques such as XRD, SEM, HR-TEM, X-ray tomography were employed to investigate the phase evolution and structural morphology, while FEM simulations were performed for understanding the crack propagation mechanisms in nanocermets.

36 MATERIALS SCIENCE↗

Formation of uranium nitride nanoparticles via mechanical alloying of uranium-molybdenum alloy fuels in gaseous nitrogen

Uranium-molybdenum (U-Mo) alloys show promise as a nuclear fuel system due to their high thermal conductivity and fuel loading capability. However, U-Mo systems are susceptible to irradiation induced swelling ultimately affecting the cladding via mechanical and chemical interactions. To address these shortcomings, this research investigated the formation of uranium mononitride (UN) nanoparticles within a 90 wt% U/10 wt% Mo (U-10Mo) matrix to act as a prospective defect sink for fission products at nanometric hetero-interfaces. To promote the formation of UN, U-10Mo powders were mechanically alloyed under a high purity nitrogen atmosphere. Variations of the milling process investigated included media size, duration of milling, and number of times the milling jar was re-aerated with nitrogen gas. Characterization of the fuel microstructure was completed using light element analysis, X-ray diffraction, scanning and transmission-electron microscopy, electron energy loss spectroscopy, and atom probe tomography. UN nanoparticles measuring 1–5 nm in radius were observed in the U-Mo matrix as early as 1 h into the mechanical alloying process. Milling time in excess of 10 h was found to lead to deleterious effects induced by the stainless-steel milling media.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mechanosynthesis, deposition and characterization of CZTS and CZTSe materials for solar cell applications

Mechanosynthesis of nanocrystalline powders of CZTS and CZTSe by ball milling technique and the physical properties of thermally evaporated CZTS and CZTSe thin films as a function of substrate temperature are investigated. Nanocrystalline Cu–Zn–Tin–Sulphide (CZTS) and Cu–Zn–Tin–Selenide (CZTSe) powders synthesized by ball milling at different milling time using the source materials of Cu, Zn, Sn, S (or) Se in the ratio 2:1:1:4 are investigated. The above synthesized powder was thermally evaporated on glass substrate kept at room temperature and 673 K under a vacuum of 10{sup −6} mbar to prepare quaternary compound semiconducting thin films in a single step process. The synthesized powder and deposited CZTS and CZTSe thin films belong to tetragonal crystal system. Raman spectra reveal that the synthesized nanocrystals are pure without any secondary phases. A gradual reduction in optical bandgap of films was observed with increasing substrate temperature due to increased crystallinity of the films. The changes in surface morphology of the films with respect to substrate temperature were studied by scanning electron microscopy and atomic force microscopy. Electrical studies indicate that the deposited films have p-type conductivity. - Highlights: • Nanocrystalline powders of CZTS and CZTSe are synthesized by ball milling technique. • The ball milled powder was thermally evaporated on glass at room temperature and 673 K. • Raman spectroscopy reveals that the synthesized nanocrystals are pure without any secondary phases. • SEM and AFM micrographs illustrate the granular type of growth and the roughness and particle sizes obtained at the substrate temperature of 673 K are higher than those obtained in the room temperature. • Hall coefficient obtained for the film confirms the p-type conductivity. • A gradual reduction in optical bandgap was observed with increasing substrate temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Directly obtained τ-phase MnAl, a high performance magnetic material for permanent magnets

The metastable tetragonal τ-phase has been directly obtained from casting Mn{sub 0.54}Al{sub 0.46} and (Mn{sub 0.55}Al{sub 0.45}){sub 100}C{sub 2} using the drop synthesis method. The as-casted samples were ball milled to decrease the particle size and relaxed at 500 °C for 1 h. The phase composition, crystallographic parameters, magnetic properties and microstructure were systematically studied. The results reveal that the τ-phase could be directly obtained from drop synthesis. The highest M{sub s} of 117 emu/g was achieved in the (Mn{sub 0.55}Al{sub 0.45}){sub 100}C{sub 2} where the τ-phase was stabilized by doping with carbon. Carbon doping increased the c/a ratio of the τ-phase as it occupies specific interstitial positions (½, ½, 0) in the structure. Furthermore, ball milling increases the coercivity (H{sub c}) at the expense of a decrease in magnetic saturation (M{sub s}). The increase in coercivity is explained by a decrease of grain size in conjunction with domain wall pinning due to defects introduced during the ball milling process. - Graphical abstract: The tetragonal τ-phase has been directly obtained from casting Mn{sub 0.54}Al{sub 0.46} and (Mn{sub 0.55}Al{sub 0.45}){sub 100}C{sub 2} using the drop synthesis method. The phase composition, crystallographic parameters, magnetic properties and microstructure were systematically studied. The highest M{sub s} of 117 emu/g was achieved for (Mn{sub 0.55}Al{sub 0.45}){sub 100}C{sub 2} ball milling increases the coercivity (H{sub c}) at the expense of a decrease in magnetic saturation (M{sub s}). - Highlights: • The ferromagnetic τ-phase has been directly obtained from casting. • The highest M{sub s} of 117 emu/g was achieved for (Mn{sub 0.55}Al{sub 0.45}){sub 100}C{sub 2}. • Ball milling increases the coercivity but decreases the magnetic saturation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of porous Ti–50Ta alloy by powder metallurgy

Highlights: • The proposed preview milling with the next sintering enables the homogeneous porous Ti50Ta (wt).% alloy to be obtained • The α and β nanocrystalline phases were prepared by ball milling. • For the longest sintering time there is complete diffusion of preview milled initial powders • The press and sinter route is proved to be a promising alternative for melted Ti-based biomaterials. - Abstract: The aim of the present study was to assess the possibility of producing porous Ti50Ta (wt%) alloys using powder metallurgy by characterizing the material properties. The influence of the sintering time on the microstructure, mechanical properties, and corrosion behaviour of the produced alloy was investigated. The samples were examined using scanning electron microscopy (SEM), transmission electron microscopy (TEM), optic microscopy, X-ray diffraction (XRD) and nanoindentation methods. The XRD results confirmed that nanocrystalline α and β phases were formed during high-energy ball milling. A longer sintering time of 72 h allowed complete interdiffusion of the elements in the pre-milled initial powders. The sintering time significantly influenced the microstructure and porosity. Additionally, the corrosion resistance of the Ti-Ta samples in Ringer's solution was characterized and differences were observed between the samples sintered at different temperatures. The open-circuit potential (E{sub OCP}) and the corrosion potential (E{sub CORR}) of all samples were similar. The sintered Ti50Ta (wt%) alloy showed better corrosion resistance than equivalent Ti or Ta reference samples. We concluded that these alloys had suitable properties for medical implant applications in the future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermal effect on magnetic parameters of high-coercivity cobalt ferrite

We prepared very high-coercivity cobalt ferrite nanoparticles synthesized by a combustion method and using short-time high-energy mechanical milling to increase strain and the structural defects density. The coercivity (H{sub C}) of the milled sample reached 3.75 kOe—a value almost five times higher than that obtained for the non-milled material (0.76 kOe). To investigate the effect of the temperature on the magnetic behavior of the milled sample, we performed a thermal treatment on the milled sample at 300, 400, and 600 °C for 30 and 180 min. We analyzed the changes in the magnetic behavior of the nanoparticles due to the thermal treatment using the hysteresis curves, Williamson-Hall analysis, and transmission electron microscopy. The thermal treatment at 600 °C causes decreases in the microstructural strain and density of structural defects resulting in a significant decrease in H{sub C}. Furthermore, this thermal treatment increases the size of the nanoparticles and, as a consequence, there is a substantial increase in the saturation magnetization (M{sub S}). The H{sub C} of the samples treated at 600 °C for 30 and 180 min were 2.24 and 1.93 kOe, respectively, and the M{sub S} of these same samples increased from 57 emu/g to 66 and 70 emu/g, respectively. The H{sub C} and the M{sub S} are less affected by the thermal treatment at 300 and 400 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigation of room temperature ferromagnetic nanoparticles of Gd 5 Si 4

Gd 5 (Si x Ge 1-x ) 4 compounds undergo first-order phase transitions close to room temperature when x ~ = 0.5, which are accompanied by extreme changes of properties. We report the fabrication of the nanoparticles of one of the parent compounds-Gd 5 Si 4 -using high-energy ball milling. Crystal structure, microstructure, and magnetic properties have been investigated. Particles agglomerate at long milling times, and the particles that are milled >20 min lose crystallinity and no longer undergo magnetic phase transition close to 340 K, which is present in a bulk material. The samples milled for >20 min exhibit a slightly increased coercivity. As a result, magnetization at a high temperature of 275K decreases with the increase in the milling time.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Impact of Trucking Network Flow on Preferred Biorefinery Locations in the Southern United States

The impact of the trucking transportation network flow was modeled for the southern United States. The study addresses a gap in existing research by applying a Bayesian logistic regression and Geographic Information System (GIS) geospatial analysis to predict biorefinery site locations. A one-way trucking cost assuming a 128.8 km (80-mile) haul distance was estimated by the Biomass Site Assessment model. The “median family income,” “timberland annual growth-to-removal ratio,” and “transportation delays” were significant in determining mill location. Transportation delays that directly impacted the costs of trucking are presented. Here, a logistic model with Bayesian inference was used to identify preferred site locations, and locations not preferential for a mill location. The model predicted that higher probability locations for smaller biomass mills (feedstock capacity, the size of sawmills) were in southern Alabama, southern Georgia, southeast Mississippi, southern Virginia, western Louisiana, western Arkansas, and eastern Texas. The higher probability locations for large capacity mills (feedstock capacity, the size for pulp and paper mills) were in southeastern Alabama, southern Georgia, central North Carolina, and the Mississippi Delta regions.

09 BIOMASS FUELS↗

Improved Method for the Production of Tetrahydrofuran From Biomass

Statement of the Problem: Tetrahydrofuran (THF) is a large volume, commodity chemical used as a basic building block for polyurethane stretch fibers (Spandex), other elastomers, solvents for PVC cements, pharmaceuticals, and coatings. Current THF production requires petroleum-based raw materials and significant energy inputs, representing inefficient use of petroleum resources and placing the U.S. at a manufacturing disadvantage compared to chemical manufacturers in other world areas. Pulp and paper manufacture is one of the largest industries in the U.S., representing about 6% of the manufacturing sector of the U.S. GDP. In recent decades, the pulp and paper industry has struggled with a declining market, poor profitability, and competition from other world areas, leading to the shutdown of many U.S. pulp and paper mills, and loss of U.S. employment. The production of chemicals, such as THF from pulp and paper waste hydrolysate, can provide new technologies and products from pulp and paper manufacture which can enhance industry profitability. The iCARD technology will produce and sell THF from selected pulp and paper byproduct hydrolysates without deleterious effect on ongoing pulp production of the mill. Overall Objective: The overall goal of this Small Business Innovation Research Phase II Project was to complete the research, development, and design tasks required to commercialize an innovative technology using catalytic reactive distillation to achieve process intensification for the manufacture of “green” THF from pulp mill waste hydrolysate. The new technology will benefit the U.S. pulp and paper industry by providing new technologies and products from pulp and paper manufacture, which can enhance industry profitability, and increase industry employment. Development of commercially competitive biomass based technologies will reduce consumption of scarce hydrocarbon resources, and improve long term U.S. competitiveness in global markets. Conclusions: The novel catalytic reactive distillation technology successfully demonstrated the technical and economic feasibility of the manufacture of THF production from dilute aqueous biomass solutions. New catalyst compositions were developed with catalytic activity for conversion of furfural to THF which exceed the activity of conventional catalysts by 2 to 3 orders of magnitude. The feasibility of achieving selectivity to the desired THF product approaching 100% was demonstrated. The novel catalysts also demonstrated catalyst stability far superior to conventional furfural decarbonylation catalysts. The novel technology also demonstrated the ability to produce other valuable commercial products such as tetrahydrofurfuryl alcohol, 1,5-pentanediol, 2-methyl furan, and 2-tetrahydromethylfuran as co-products with THF. Based on the use of waste pulp mill hydrolysate as the biomass raw material source, the new technology will produce THF for a total manufacturing cost less than the raw material cost for the hydrocarbon-based feed stocks for conventional THF production. Commercial Applications: Selective catalytic reactive distillation of pulp mill waste hydrolysate will allow commercial production of “green” THF from biomass feedstocks for the production of “green” elastomer fibers, and industrial solvents. The new technology will benefit the U.S. pulp and paper industry by providing new technologies and products from pulp and paper manufacture, which can enhance industry profitability, and increase industry employment. Development of commercially competitive biomass based technologies will reduce consumption of scarce hydrocarbon resources, and improve long term U.S. competitiveness in global markets.

09 BIOMASS FUELS↗