Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “merging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Different to the core: The pre-supernova structures of massive single and binary-stripped stars

The majority of massive stars live in binary or multiple systems and will interact with a companion during their lifetimes, which helps to explain the observed diversity of core-collapse supernovae. Donor stars in binary systems can lose most of their hydrogen-rich envelopes through mass transfer. As a result, not only are the surface properties affected, but so is the core structure. However, most calculations of the core-collapse properties of massive stars rely on single-star models. We present a systematic study of the difference between the pre-supernova structures of single stars and stars of the same initial mass (11–21 M ⊙ ) that have been stripped due to stable post-main-sequence mass transfer at solar metallicity. We present the pre-supernova core composition with novel diagrams that give an intuitive representation of the isotope distribution. As shown in previous studies, at the edge of the carbon-oxygen core, the binary-stripped star models contain an extended gradient of carbon, oxygen, and neon. This layer remains until core collapse and is more extended in mass for higher initial stellar masses. It originates from the receding of the convective helium core during core helium burning in binary-stripped stars, which does not occur in single-star models. We find that this same evolutionary phase leads to systematic differences in the final density and nuclear energy generation profiles. Binary-stripped star models have systematically higher total masses of carbon at the moment of core collapse compared to single-star models, which likely results in systematically different supernova yields. In about half of our models, the silicon-burning and oxygen-rich layers merge after core silicon burning. We discuss the implications of our findings for the “explodability”, supernova observations, and nucleosynthesis of these stars. Our models are publicly available and can be readily used as input for detailed supernova simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

The eROSITA Final Equatorial-Depth Survey (eFEDS)

In 2019, the eROSITA telescope on board the Russian-German satellite Spectrum-Roentgen-Gamma (SRG) began to perform a deep all-sky X-ray survey with the aim of identifying ~100 000 clusters and groups over the course of four years. As part of its performance verification phase, a ~140 deg 2 survey, called eROSITA Final Equatorial-Depth Survey (eFEDS), was performed. With a depth typical of the all-sky survey after four years, it allows tests of tools and methods as well as improved predictions for the all-sky survey. As part of this effort, a catalog of 542 X-ray selected galaxy group and cluster candidates was compiled. Here, in this paper, we present the optical follow-up, with the aim of providing redshifts and cluster confirmation for the full sample. Furthermore, we aim to provide additional information on the dynamical state, richness, and optical center of the clusters. Finally, we aim to evaluate the impact of optical cluster confirmation on the purity and completeness of the X-ray selected sample. We used optical imaging data from the Hyper Suprime-Cam Subaru Strategic Program and from the Legacy Survey to identify optical counterparts to the X-ray detected cluster candidates. We make use of the multi-component matched filter cluster confirmation tool (MCMF), as well as of the optical cluster finder CAMIRA to derive cluster redshifts and richnesses. MCMF provided the probabilities with which an optical structure would be a chance superposition with the X-ray candidate. These probabilities were used to identify the best optical counterpart as well as to confirm an X-ray candidate as a cluster. The impact of this confirmation process on catalog purity and completeness was estimated using optical to X-ray scaling relations as well as simulations. The resulting catalog was furthermore matched with public group and cluster catalogs. Optical estimators of the cluster dynamical state were constructed based on density maps of the red-sequence galaxies at the cluster redshift. By providing redshift estimates for all 542 candidates, we construct an optically confirmed sample of 477 clusters and groups with a residual contamination of 6%. Of these, 470 (98.5%) are confirmed using MCMF, and 7 systems are added through cross-matching with spectroscopic group catalogs. Using observable-to-observable scaling and the applied confirmation threshold, we predict that 8 ± 2 real systems have been excluded with the MCMF cut required to build this low-contamination sample. This number agrees well with the 7 systems found through cross-matching that were not confirmed with MCMF. The predicted redshift and mass distribution of this catalog agree well with simulations. Thus, we expect that these 477 systems include >99% of all true clusters in the candidate list. Using an MCMF-independent method, we confirm that the catalog contamination of the confirmed subsample is 6 ± 3%. Application of the same method to the full candidate list yields 17 ± 3%, consistent with estimates coming from the fraction of confirmed systems of ~17% and with expectations from simulations of ~20%. We also present a sample of merging cluster candidates based on the derived estimators of the cluster dynamical state.

79 ASTRONOMY AND ASTROPHYSICS↗

Survey of Surveys: I. The largest compilation of radial velocities for the Galaxy

In the present-day panorama of large spectroscopic surveys, the amount, diversity, and complexity of the available data continuously increase. The overarching goal of studying the formation and evolution of our Galaxy is hampered by the heterogeneity of instruments, selection functions, analysis methods, and measured quantities. Here, we present a comprehensive catalogue, the Survey of Surveys (SoS), built by homogeneously merging the radial velocity (RV) determinations of the largest ground-based spectroscopic surveys to date, such as APOGEE, GALAH, Gaia-ESO, RAVE, and LAMOST, using Gaia as a reference. This pilot study serves to prove the concept and to test the methodology that we plan to apply in the future to the stellar parameters and abundance ratios as well. We have devised a multi-staged procedure that includes: (i) the cross match between Gaia and the spectroscopic surveys using the official Gaia cross-match algorithm, (ii) the normalisation of uncertainties using repeated measurements or the three-cornered hat method, (iii) the cross calibration of the RVs as a function of the main parameters on which depend (magnitude, effective temperature, surface gravity, metallicity, and signal-to-noise ratio) to remove trends and zero point offsets, and (iv) the comparison with external high-resolution samples, such as the Gaia RV standards and the Geneva-Copenhagen survey, to validate the homogenisation procedure and to calibrate the RV zero-point of the SoS catalogue. We provide the largest homogenised RV catalogue to date, containing almost 11 million stars, of which about half come exclusively from Gaia and half in combination with the ground-based surveys. We estimate the accuracy of the RV zero-point to be about 0.16–0.31 km s –1 and the RV precision to be in the range 0.05–1.50 km s –1 depending on the type of star and on its survey provenance. We validate the SoS RVs with open clusters from a high resolution homogeneous samples and provide the systemic velocity of 55 individual open clusters. Additionally, we provide median RVs for 532 clusters recently discovered by Gaia data. The SoS is publicly available and ready to be applied to various research projects, such as the study of star clusters, Galactic archaeology, stellar streams, or the characterisation of planet-hosting stars, to name a few. We also plan to include survey updates and more data sources in future versions of the SoS.

79 ASTRONOMY AND ASTROPHYSICS↗

Merger identification through photometric bands, colours, and their errors

Aims. We present the application of a fully connected neural network (NN) for galaxy merger identification using exclusively photometric information. Our purpose is not only to test the method’s efficiency, but also to understand what merger properties the NN can learn and what their physical interpretation is. Methods. We created a class-balanced training dataset of 5860 galaxies split into mergers and non-mergers. The galaxy observations came from SDSS DR6 and were visually identified in Galaxy Zoo. The 2930 mergers were selected from known SDSS mergers and the respective non-mergers were the closest match in both redshift and r magnitude. The NN architecture was built by testing a different number of layers with different sizes and variations of the dropout rate. We compared input spaces constructed using: the five SDSS filters: u, g, r, i, and z; combinations of bands, colours, and their errors; six magnitude types; and variations of input normalization. Results. We find that the fibre magnitude errors contribute the most to the training accuracy. Studying the parameters from which they are calculated, we show that the input space built from the sky error background in the five SDSS bands alone leads to 92.64 ± 0.15% training accuracy. We also find that the input normalization, that is to say, how the data are presented to the NN, has a significant effect on the training performance. Conclusions. We conclude that, from all the SDSS photometric information, the sky error background is the most sensitive to merging processes. This finding is supported by an analysis of its five-band feature space by means of data visualization. Moreover, studying the plane of the g and r sky error bands shows that a decision boundary line is enough to achieve an accuracy of 91.59%.

79 ASTRONOMY AND ASTROPHYSICS↗

The dynamical state of eROSITA clusters and its impact on the brightest cluster galaxy luminosity

The first Spectrum-Roentgen-Gamma (SRG) eROSITA public release contains 12 247 clusters and groups from its first 6 months of operation. We used the offset between the brightest cluster galaxy (BCG) and the X-ray peak ( D BCG − X ) to classify the cluster dynamical state of 3946 galaxy clusters and groups. We aim to investigate the evolution of the merger and relaxed cluster distributions with redshift and mass, and the distributions’ impact on the BCG. We used the X-ray peak from the eROSITA survey and the BCG position from the LS DR10 optical data, which includes the DECam eROSITA Survey optical data, to measure the D BCG − X offset. We modelled the distribution of D BCG − X , in units of R 500 , as the sum of two Rayleigh distributions representing the cluster’s relaxed and disturbed populations, and explored their evolution with redshift and mass. To explore the impact of the cluster’s dynamical state on the BCG luminosity, we separated the main sample according to the dynamical state. We defined clusters as relaxed if D BCG − X < 0.25R500, disturbed if D BCG − X > 0.5R500, and ‘diverse’ if 0.25R500 < D BCG − X < 0.5R500. We find no evolution of the merging fraction with redshift or mass. The width of the relaxed distribution increases with redshift, while the width of the two Rayleigh distributions decreases with mass. The analysis reveals that BCGs in relaxed clusters are brighter than BCGs in both the disturbed and diverse cluster populations. The most significant differences are found for high-mass clusters at higher redshifts. The results suggest that BCGs in low-mass clusters are less centrally bound than those in high-mass systems, irrespective of the dynamical state. Over time, BCGs in relaxed clusters progressively align with the potential centre. This alignment correlates with their luminosity growth relative to BCGs in dynamically disturbed clusters, underscoring the critical role of the cluster’s dynamical state in regulating BCG evolution.

galaxy clusters↗

JWST’s PEARLS: A z ≃ 6 quasar in a train-wreck galaxy merger system

We present JWST NIRSpec integral field spectroscopy observations of the z = 5.89 quasar NDWFS J1425+3254 from 0.6–5.3 μm, covering the rest-frame ultraviolet and optical at a spectral resolution of R ∼ 100. The quasar has a black hole mass of M BH = (1.4 +3.1 −1.0 ) × 10 9 M ⊙ and an Eddington ratio of L Bol /L Edd = 0.3 +0.6 −0.2 , as implied from the broad Balmer Hα and Hβ lines. The quasar host has significant ongoing obscured star formation, as well as a quasar-driven outflow with velocity 6050 +460 −630 km s −1 and ionised outflow rate of 1650 +130 −1230 M ⊙ yr −1 . This is possibly one of the most extreme outflows in the early Universe. The data also reveal that two companion galaxies are merging with the quasar host. The north-eastern companion galaxy is relatively old and very massive, with a luminosity-weighted stellar age of 65 +9 −4 Myr, stellar mass of (3.6 +0.6 −0.3 #x00D7; 10 11 M ⊙ , and star-formation rate (SFR) of ∼15–30 M ⊙ yr −1 . A bridge of gas connects this companion galaxy and the host, confirming their ongoing interaction. A second merger is occurring between the quasar host and a much younger companion galaxy to the south, with a stellar age of 6.7 ± 1.8 Myr, stellar mass of (1.9 ± 0.4)×10 10 M ⊙ , and SFR of ∼40–65 M ⊙ yr −1 . There is also another galaxy in the field, likely in the foreground at z = 1.135, which could be gravitationally lensing the quasar with a magnification of 1 < μ < 2 and, thus, < 0.75 mag. Overall, the system is a ‘train-wreck’ merger of three galaxies, with star formation and extreme quasar activity that were likely triggered by these ongoing interactions.

79 ASTRONOMY AND ASTROPHYSICS↗

Convective shells in the interior of Cepheid variable stars: Overshooting models based on hydrodynamic simulations

Context. Because Cepheid variable stars have long been used as a cosmic benchmark for scaling distances in our Galaxy and beyond, the accuracy of stellar evolution models for Cepheids have wide-reaching effects. However, our understanding of the dynamics in the interiors of these physically complex stars is limited. Aims. Our goal is to provide a detailed multi-dimensional picture of hydrodynamic convection and convective boundary mixing in the interior of Cepheids. Methods. Using the Modules for Experiments in Stellar Astrophysics (MESA), we studied the structure of intermediate-mass stars that cross the instability strip. Then, we performed two-dimensional hydrodynamic simulations of six stars with the fully compressible Multidimensional Stellar Implicit Code (MUSIC). Our simulations did not model the radial pulsations but focused on the interior structure of this family of stars. We developed and applied a new statistical analysis to examine convection and convective boundary mixing in the interior of these stellar simulations. Results. Based on a grid of MESA models, we demonstrated that a common structure for intermediate mass Cepheids includes an interior convective shell as well as a thin outer convective envelope. Using the extreme value theory approach to analyze our MUSIC simulation data, we found that overshooting above the convective shell fills the space between these convectively unstable layers. We developed a new statistical analysis that provides a clearer picture of how overshooting fills this layer; it also allowed us to formulate a detailed comparison between overshooting above and below the convective shell. Our analysis effectively decomposes the overshooting layer into two layers: a weak overshooting layer and a strong overshooting layer. Statistically, this is accomplished by decomposing the strongly non-Gaussian probability density function into a mixture of gamma distributions. Using our mixture model, we showed that the ratio of overshooting lengths above and below the convective shell depends directly on the radial extent of the convective shell as well as its depth in the star. We proposed a new form for the diffusion coefficient that addresses the need for overlapping overshooting layers between convective shells. We introduced the idea of a “super-mixing layer” where overshooting from both the convective shell and the convective envelope results in efficient mixing and could be viewed as merging the two adjacent convective zones.

79 ASTRONOMY AND ASTROPHYSICS↗

Streaming Readout of the CLAS12 Forward Tagger Using TriDAS and JANA2

An effort is underway to develop streaming readout data acquisition system for the CLAS12 detector in Jefferson Lab’s experimental Hall-B. Successful beam tests were performed in the spring and summer of 2020 using a 10GeV electron beam from Jefferson Lab’s CEBAF accelerator. The prototype system combined elements of the TriDAS and CODA data acquisition systems with the JANA2 analysis/reconstruction framework. This successfully merged components that included an FPGA stream source, a distributed hit processing system, and software plugins that allowed offline analysis written in C++ to be used for online event filtering. Details of the system design and performance are presented.

Ameli, Fabrizio↗

Neutron Star Mergers and the Quark Matter Equation of State

As neutron stars merge they can approach very high nuclear density. Here, we summarized recent results for the evolution and gravitational wave emission from binary-neutron star mergers using a a variety of nuclear equations of state with and without a crossover transition to quark matter. We discuss how the late time gravitational wave emission from binary neutron star mergers may possibly reveal the existence of a crossover transition to quark matter.

Mathews, Grant J.↗

ROOT’s RNTuple I/O Subsystem: The Path to Production

The RNTuple I/O subsystem is ROOT’s future event data file format and access API. It is driven by the expected data volume increase at upcoming HEP experiments, e.g. at the HL-LHC, and recent opportunities in the storage hardware and software landscape such as NVMe drives and distributed object stores. RNTuple is a redesign of the TTree binary format and API and has shown to deliver substantially faster data throughput and better data compression both compared to TTree and to industry standard formats. In order to let HENP computing workflows benefit from RNTuple’s superior performance, however, the I/O stack needs to connect efficiently to the rest of the ecosystem, from grid storage to (distributed) analysis frameworks to (multithreaded) experiment frameworks for reconstruction and ntuple derivation. With the RNTuple binary format soon arriving at its first production release, we present RNTuple’s feature set, integration efforts, and its performance impact on the time-to-solution. We show the latest performance figures of RDataFrame analysis code of realistic complexity, comparing RNTuple and TTree as data sources. We discuss RNTuple’s approach to functionality critical to the HENP I/O (such as multithreaded writes, fast data merging, schema evolution) and we provide an outlook on the road to its use in production.

Blomer, Jakob↗

Thoroughly testing and integrating hundreds of Pull Requests per month: ROOT’s new Cost-efficient and Feature Rich GitHub-based CI

ROOT is an open source framework, freely available on GitHub, at the heart of data acquisition, processing and analysis of HE(N)P experiments, and beyond. It is developed collaboratively: contributions are not authored only by ROOT team members, but also by the user community at large: developers and scientists from universities, labs as well as the private sector. More than 1500 GitHub Pull Requests are merged on average per year. It is in this context that code integration acquires a primary role. The review of code contributions isn’t enough: not only they need to be thoroughly reviewed, they also need to be thoroughly tested through a powerful CI infrastructure on several different platforms to comply with the high code quality standards of the project. Since the end of 2023, ROOT moved its continuous integration system from Jenkins to GitHub Actions. In this contribution, we characterise the transition to the GitHub CI, focussing on our strategy, its implementation and the lessons learned, as well as the advantages the new system offers with respect to the previous one. Particular emphasis will be given to the evaluation of the cost-benefit ratio for Jenkins and GitHub Actions for the ROOT project. We also describe how we manage to run in less than one hour thousands of unit, integration, functional and end-to-end tests on different flavours of Windows, four versions of macOS, as well as about ten of the most used Linux distributions, taking advantage of the CERN computing infrastructure.

Piparo, Danilo [CERN]↗

Reconstruction framework advancements to support streaming for the ePIC detector at the EIC

The ePIC collaboration adopted the JANA2 framework to manage its reconstruction algorithms. This framework has since evolved substantially in response to ePIC’s needs. There have been three main design drivers: integrating cleanly with the Podio-based data models and other layers of the key4hep stack, enabling external configuration of existing components, and supporting timeframe splitting for streaming readout. The result is a unified component model featuring a new declarative interface for specifying inputs, outputs, parameters, services, and resources. This interface enables the user to instantiate, configure, and wire components via an external file. One critical new addition to the component model is a hierarchical decomposition of data boundaries into levels such as Run, Timeframe, PhysicsEvent, and Subevent. Two new component abstractions, Folder and Unfolder, are introduced in order to traverse this hierarchy, e.g. by splitting or merging. The pre-existing components can now operate at different event levels, and JANA2 will automatically construct the corresponding parallel processing topology. This means that a user may write an algorithm once, and configure it at runtime to operate on timeframes or on physics events. Overall, these changes mean that the user requires less knowledge about the framework internals, obtains greater flexibility with configuration, and gains the ability to reuse the existing abstractions in new streaming contexts.

Brei, Nathan [Thomas Jefferson National Accelerato↗

The MCNP ® 6 code: A decade of progress

After several years of effort involved in merging the Los Alamos National Laboratory MCNP5 and MCNPX codes, in 2013 the first production release of version 6 of the Monte Carlo N-Particle ® , or MCNP ® , code MCNP6.1 was distributed publicly. Since then, three significant releases have been issued: MCNP6.1.1beta in 2014, MCNP6.2 in 2018, and MCNP6.3 in 2023. While each release always contains new features, code enhancements, and bug fixes, each version has had a different primary focus, ranging from improved calculational efficiency to new powerful utilities and tools, to software modernization of the code base. With all that has been learned over the first decade of the MCNP6 code, continuous progress is being made toward a modernized, general-purpose Monte Carlo radiation transport code that remains a trusted resource for the global community of practitioners. This paper describes these first 10+ years of the MCNP6 code and its continually improving data libraries, and gives some insight into how the next decade is expected to unfold.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Stability analysis of the Eulerian–Lagrangian finite volume methods for nonlinear hyperbolic equations in one space dimension

In this paper, we construct a novel Eulerian–Lagrangian finite volume (ELFV) method for nonlinear scalar hyperbolic equations in one space dimension. It is well known that the exact solutions to such problems may contain shocks though the initial conditions are smooth, and direct numerical methods may suffer from restricted time step sizes. To relieve the restriction, we propose an ELFV method, where the space-time domain was separated by the partition lines originated from the cell interfaces whose slopes are obtained following the Rakine–Hugoniot junmp condition. Unfortunately, to avoid the intersection of the partition lines, the time step sizes are still limited. To fix this gap, we detect effective troubled cells (ETCs) and carefully design the influence region of each ETC, within which the partitioned space-time regions are merged together to form a new one. Then with the new partition of the space-time domain, we theoretically prove that the proposed first-order scheme with Euler forward time discretization is total-variation-diminishing and maximum-principle-preserving with at least twice larger time step constraints than the classical first order Eulerian method for Burgers’ equation. Numerical experiments verify the optimality of the designed time step sizes.

97 MATHEMATICS AND COMPUTING↗

Evaluating Connected and Automated Vehicles in Co-Simulation Environment of Traffic Microsimulation and Vehicle Dynamics

Connected and automated vehicles (CAVs) have the potential to improve many aspects of the current transportation systems such as safety, mobility, and energy efficiency. In order to evaluate the benefits and impacts of a CAV, the CAV control algorithm is typically implemented on vehicles simulated in a traffic microsimulation environment. However, traffic microsimulation usually lacks detailed vehicle and powertrain dynamics, making it challenging to fully understand how a CAV control algorithm will perform and respond on an actual vehicle. Whether the same benefits measured in the simulation will also be observed in real-world remains an open question. One potential approach to fill in this gap is to conduct a co-simulation of traffic microsimulation with detailed vehicle and powertrain dynamics models, often developed in MATLAB Simulink. However, current microsimulation tools such as VISSIM and SUMO do not have a ready-to-use interface for co-simulation with vehicle dynamics and Simulink. Also, even if such an interface exists, it will be tool-specific, making it challenging to shift from one tool to another or test CAV controls in different tools. There are needs for tool-agnostic co-simulation as different microsimulation tools have their pros and cons, and researchers often need to use different tools based on the purposes of the simulation, project needs, and applications. In this work, Flexible Interface for X-in-the-loop Simulation (FIXS) is developed that can support the co-simulation of microsimulation, CAV control algorithm, and vehicle dynamics model in Simulink. Enabled by the FIXS, the benefit and performance of a CAV control algorithm can be better understood with the consideration of vehicle responses and dynamics. The connection to VISSIM and SUMO is handled internally by the interface, and users can easily switch tools by changing a configuration file. The co-simulation capability is demonstrated for a VISSIM eco-approach and departure CAV scenario and a SUMO cooperative merging scenario for both a passenger CAV and a class 8 heavy-duty connected and automated trucks.

Shao, Yunli↗

General Multifidelity Surrogate Models: Framework and Active-Learning Strategies for Efficient Rare Event Simulation

Estimating the probability of failure for complex real-world systems using high-fidelity computational models is often prohibitively expensive, especially when the probability is small. Exploiting low-fidelity models can make this process more feasible, but merging information from multiple low-fidelity and high-fidelity models poses several challenges. Here, this paper presents a robust multi-fidelity surrogate modeling strategy in which the multi-fidelity surrogate is assembled using an active learning strategy using an on-the-fly model adequacy assessment set within a subset simulation framework for efficient reliability analysis. The multi-fidelity surrogate is assembled by first applying a Gaussian process correction to each low-fidelity model and assigning a model probability based on the model's local predictive accuracy and cost. Three strategies are proposed to fuse these individual surrogates into an overall surrogate model based on model averaging and deterministic/stochastic model selection. The strategies also dictate which model evaluations are necessary. No assumptions are made about the relationships between low-fidelity models, while the high-fidelity model is assumed to be the most accurate and most computationally expensive model. Through two analytical and two numerical case studies, including a case study evaluating the failure probability of Tristructural isotropic-coated (TRISO) nuclear fuels, the algorithm is shown to be highly accurate while drastically reducing the number of high-fidelity model calls (and hence computational cost).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tuning to more compressible phase in TiZrHfNb high entropy alloy by pressure

In this work, the starting nominal Ti 25 Zr 25 Hf 25 Nb 25 high entropy alloy (HEA) has two body centered cubic (BCC) phases with a volume percentage about 100:1, with the primary phase having a much larger bulk modulus (incompressible) than the uniform single-phase HEA. We found that these two phases merged into one single BCC phase at pressures beyond 36 GPa, whose bulk modulus dropped to that of the normal homogeneous HEA. After decompressing, the new phase can be sustained to ambient conditions. We note this abnormal pressure-induced softening was largely related to the lattice distortion evolution and interfacial energy during compression.

36 MATERIALS SCIENCE↗

Enhanced magnetocaloric performance in manganite bilayers

Bilayer films of La 0.8 Sr 0.2 MnO 3 and La 0.7 Ca 0.3 MnO 3 with different layer thicknesses and stacking sequences were synthesized via pulsed laser deposition. The magnetic properties and magnetocaloric effects were systematically investigated. We found that the phase transition associated with the layers tends to merge together at an optimal thickness and a stacking sequence. The operating temperature span of the entropy change broadens at the expense of its magnitude, leading to an enhancement of the refrigerant capacity by over 40%. The optimized bilayer film possesses a refrigerant capacity of ~6.0J/kg, compared to a value of ~4.2J/kg for the single-phase films. The phase transition broadening induced by epitaxial strain is responsible for the enhanced window of operating temperature as well as refrigerant capacity. Finally, the design principle developed here may be applied to ferroelastic and ferroelectric materials to enhance elastocaloric and electrocaloric effects.

36 MATERIALS SCIENCE↗