Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “manufacturing processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Application of Laminar Flow Control Technology to Long-Range Transport Design

The impact of laminar flow control (LFC) technology on aircraft structural design concepts and systems was discussed and the corresponding benefits were shown in terms of performance and fuel economy. Specific topics discussed include: (1) recent advances in laminar boundary layer development and stability analysis techniques in terms of suction requirements and wing suction surface design; (2) validation of theory and realistic simulation of disturbances and off-design conditions by wind tunnel testing; (3) compatibility of aerodynamic design of airfoils and wings with LFC requirements; (4) structural alternatives involving advanced alloys or composites in combinations made possible by advanced materials processing and manufacturing techniques; (5) addition of suction compressor and drive units and their location on the aircraft; and (6) problems associated with operation of LFC aircraft, including accumulation of insects at low altitudes and environmental considerations.

Gratzer, L. B.↗
NASA NTRS1978

Development program for a 200 kW, technological processes in space

Dimensionless conservation equations, are presented and the theoretical basis of fluid behavior aboard orbiting satellites are reviewed with application to the processes of manufacturing crystals in weightlessness. The small amount of gravitational acceleration is shown to increase the separation of bands of varying concentration. Natural convection is shown to have no practical effect on crystallization from realistic conductions of weightlessness. The effects of surface tension become increasingly large, and suggestions are made for further research.

Jory, H.↗
NASA NTRS1979

Theoretical bases for conducting certain technological processes in space

Dimensionless conservation equations are presented and the theoretical bases of fluid behavior aboard orbiting satellites with application to the processes of manufacturing crystals in weightlessness. The small amount of gravitational acceleration is shown to increase the separation of bands of varying concentration. Natural convection is shown to have no practical effect on crystallization from a liquid melt. Barodiffusion is also negligibly small in realistic conditions of weightlessness. The effects of surface tension become increasingly large, and suggestions are made for further research.

Okhotin, A. S.↗
NASA NTRS1978

Standard cell data

Performance tests of the mechanical designs of nickel cadmium cells are presented. The framework of the manufacturing and processing of these cells is described.

Halpert, G.↗
NASA NTRS1979

Low cost processes for silicon

The paper describes the multiple process development of low cost processes for manufacture of silicon. A support program includes subtasks for the modeling of reactions and reactors, chemical engineering and solid-state physics studies, and development of impurity concentration measurement procedures. The preliminary economic analyses indicate total product costs ranging from $5.00 to $8.73/kg based on 1000 MT/yr plants. In the studies of impurity effects, a model which considers that degradations of solar cell performance by impurities are primarily due to decreases in base diffusion length was constructed from experimental data.

Lutwack, R.↗
NASA NTRS1980

Microwave limb sounder, graphite epoxy support structure

The manufacturing and processing procedures which were used to fabricate a precision graphite/epoxy support structure for a spherical microwave reflecting surface are described. The structure was made fromm GY-70/930 ultra high modulus graphite prepreg, laminated to achieve an isotropic in plane thermal expansion of less than + or - 0.1 PPM/F. The structure was hand assembled to match the interface of the reflective surface, which was an array of 18 flexure supported, aluminum, spherically contoured tiles. Structural adhesives were used in the final assembly to bond the elements into their final configuration. A eutectic metal coating was applied to the composite surface to reduce dimensional instabilities arising from changes in the composite epoxy moisture content due to environmental effects. Basic materials properties data are reported and the results of a finite element structural analysis are referenced.

Pynchon, G.↗
NASA NTRS1982

Space manufacturing systems and the Space Operations Center

For the planned Space Operations Center (SOC) and envisioned space manufacturing and processes systems, the concepts of phased programs, development and operations, station-keeping orbit envelopes, propulsive harbor tugs, and aspects of servicing are discussed. The SOC three-phased program concept includes the servicing of satellites in compatible orbits and in transition to higher energy orbits. Two concepts of a free-flyer satellite are assessed, including the fuel system, and the placement of such a satellite into orbit is discussed. Finally, some services that will be provided by SOC are mentioned.

Louviere, A. J.↗
NASA NTRS1983

High-speed machining of Space Shuttle External Tank (ET) panels

Potential production rates and project cost savings achieved by converting the conventional machining process in manufacturing shuttle external tank panels to high speed machining (HSM) techniques were studied. Savings were projected from the comparison of current production rates with HSM rates and with rates attainable on new conventional machines. The HSM estimates were also based on rates attainable by retrofitting existing conventional equipment with high speed spindle motors and rates attainable using new state of the art machines designed and built for HSM.

Miller, J. A.↗
NASA NTRS1983

Source-circuit design with multiple photovoltaic manufacturers

The problems associated with source circuit design for use in photovoltaic (PV) hardware of different manufacturers or processes are discussed. The varying performance of dissimilar materials is examined and the need for standardization of equipment and performance output is investigated.

Spencer, R.↗
NASA NTRS1985

The issue is leadership

Four NASA Phase B centers (NASA-Johnson, NASA-Marshall, NASA-Goddard, and NASA-Lewis) are responsible for construction, assembly, servicing, habitat, and other particular tasks and functions of the Space Station. The project has been joined by the aerospace programs of Canada, Japan, and the European Space Agency, ensuring technological and financial support, and cooperative use by the participants. Some of the future uses of the Space Station include biomedical research and applications; experiments in solar-terrestrial physics and astronomy; building, maintenance, and launching of space instruments and planetary missions; manufacturing and processing of materials that call for the conditions of microgravity and weightlessness; supporting communication operations; and improving earth and atmospheric observations. The political significance of the Space Station as a symbol of leadership and of friendly cooperation is noted.

Beggs, J. M.↗
NASA NTRS1985

Gearing

Gearing technology in its modern form has a history of only 100 years. However, the earliest form of gearing can probably be traced back to fourth century B.C. Greece. Current gear practice and recent advances in the technology are drawn together. The history of gearing is reviewed briefly in the Introduction. Subsequent sections describe types of gearing and their geometry, processing, and manufacture. Both conventional and more recent methods of determining gear stress and deflections are considered. The subjects of life prediction and lubrication are additions to the literature. New and more complete methods of power loss predictions as well as an optimum design of spur gear meshes are described. Conventional and new types of power transmission systems are presented.

John J. Coy↗
NASA NTRS1987

Ultralight amorphous silicon alloy photovoltaic modules for space applications

Ultralight and ultrathin, flexible, rollup monolithic PV modules have been developed consisting of multijunction, amorphous silicon alloys for either terrestrial or aerospace applications. The rate of progress in increasing conversion efficiency of stable multijunction and multigap PV cells indicates that arrays of these modules can be available for NASA's high power systems in the 1990's. Because of the extremely light module weight and the highly automated process of manufacture, the monolithic a-Si alloy arrays are expected to be strongly competitive with other systems for use in NASA's space station or in other large aerospace applications.

Hanak, J. J.↗
NASA NTRS1987

Vapor compression distiller and membrane technology for water revitalization

Water revitalization for a space station can consist of membrane filtration processes and a distillation process. Water recycling equipment using membrane filtration processes was manufactured for ground testing. It was assembled using commercially available components. Two systems for the distillation are studied: one is absorption type thermopervaporation cell and the other is a vapor compression distiller. Absorption type thermopervaporation, able to easily produce condensed water under zero gravity, was investigated experimentally and through simulated calculation. The vapor compression distiller was studied experimentally and it offers significant energy savings for evaporation of water.

Ashida, A.↗
NASA NTRS1988

Multi-color pyrometer for materials processing in space

The design, construction and calibration of a computer-linked multicolor pyrometer is described. The device was constructed for ready adaptation to a spacecraft and for use in the control of thermal processes for manufacturing materials in space. The pyrometer actually uses only one color at a time, and is relatively insensitive to uncertainties in the heated object's emissivity because the product of the color and the temperature has been selected to be within a regime where the radiant energy emitted from the body increases very rapidly with temperature. The instrument was calibrated and shown to exceed its design goal of temperature measurements between 300 and 2000 C, and its accuracy in the face of imprecise knowledge of the hot object's emissivity was demonstrated.

Frish, Michael B.↗
NASA NTRS1987

High power lasers: Sources, laser-material interactions, high excitations, and fast dynamics in laser processing and industrial applications; Proceedings of the Meeting, The Hague, Netherlands, Mar. 31-Apr. 3, 1987

The design and operation of high-power lasers for industrial applications are discussed in reviews and reports. Topics addressed include the status of optical technology in the Netherlands, laser design, the deposition of optical energy, laser diagnostics, nonmetal processing, and energy coupling and plasma formation. Consideration is given to laser-induced damage to materials, fluid and gas flow dynamics, metal processing, and manufacturing. Graphs, diagrams, micrographs, and photographs are provided.

Kreutz, E. W.↗
NASA NTRS1987

Advanced planar array development for space station

The objectives are to develop a process for manufacturing superstrate assemblies; demonstrate superstrate technology through fabrication and testing; develop and analyze a preliminary solar array wing design; and fabricate a wing segment based on the wing design. The task description, project flow diagram, and schedule are outlined. The progress to date is presented.

Source record↗
NASA NTRS1989

A noncontacting scanning photoelectron emission technique for bonding surface cleanliness inspection

Molecular contamination of bonding surfaces can drastically affect the bond strength that can be achieved and therefore the structural integrity and reliability of the bonded part. The presence of thin contaminant films on bonding surfaces can result from inadequate or incomplete cleaning methods, from oxide growth during the time between cleaning (such as grit blasting) and bonding, or from failure to properly protect cleaned surfaces from oils, greases, fingerprints, release agents, or deposition of facility airborne molecules generated by adjacent manufacturing or processing operations. Required cleanliness levels for desired bond performance can be determined by testing to correlate bond strength with contaminant type and quantity, thereby establishing the degree of contamination that can be tolerated based on the strength that is needed. Once the maximum acceptable contaminant level is defined, a method is needed to quantitatively measure the contaminant level on the bonding surface prior to bonding to verify that the surface meets the established cleanliness requirement. A photoelectron emission technique for the nondestructive inspection of various bonding surfaces, both metallic and nonmetallic, to provide quantitative data on residual contaminant levels is described. The technique can be used to scan surfaces at speeds of at least 30 ft/min using a servo system to maintain required sensor to surface spacing. The fundamental operation of the photoelectron emission sensor system is explained and the automated scanning system and computer data acquisition hardware and software are described.

Gause, Raymond L.↗
NASA NTRS1989

Space Shuttle Main Engine structural analysis and data reduction/evaluation. Volume 1: Aft Skirt analysis

Using the ANSYS finite element program, a global model of the aft skirt and a detailed nonlinear model of the failure region was made. The analysis confirmed the area of failure in both STA-2B and STA-3 tests as the forging heat affected zone (HAZ) at the aft ring centerline. The highest hoop strain in the HAZ occurs in this area. However, the analysis does not predict failure as defined by ultimate elongation of the material equal to 3.5 percent total strain. The analysis correlates well with the strain gage data from both the Wyle influence test of the original design aft sjirt and the STA-3 test of the redesigned aft skirt. it is suggested that the sensitivity of the failure area material strength and stress/strain state to material properties and therefore to small manufacturing or processing variables is the most likely cause of failure below the expected material ultimate properties.

Berry, David M.↗