SEARCH · Engineering Papers

Results for “load response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

All sources NASA NTRS DOE OSTI

DOE OSTI2018

Performance response of packed-bed thermal storage to cycle duration perturbations

Packed-bed thermal stores are integral components in numerous bulk electricity storage systems and may also be integrated into renewable generation and process heat systems. In such applications, the store may undergo charging and discharging periods of irregular durations. Previous work has typically concentrated on the initial charging cycles, or on steady-state cyclic operation. Understanding the impact of unpredictable charging periods on the storage behavior is necessary to improve design and operation. Here in this paper, the influence of the cycle duration (or 'partial-charge' cycles) on the performance of such thermal stores is investigated. The response to perturbations is explained and provides a framework for understanding the response to realistic load cycles.

14 SOLAR ENERGY↗

DOE OSTI2020

A gravo-aeroelastically scaled wind turbine rotor at field-prototype scale with strict structural requirements

A new sub-scale field-prototype design solution is developed to realize the dynamics, structural response, and distributed loads (gravitational, aerodynamic, centrifugal) that are characteristic of a full-scale large, modern wind turbine rotor. Prior work in sub-scale wind turbine testing has focused on matching aerodynamic/aero-elastic characteristics of full-scale rotors at wind tunnel scale. However, large-scale rotor designs must expand beyond this limited set of scaling parameters for cost-effective prototyping and meet strict requirements for structural safety for field testing. Here, the challenge lies in producing a structural design meeting two competing objectives: novel scaling objectives that prescribe the sub-scale blade to have low mass and stiffness; and traditional structural safety objectives that drive the design to have higher stiffness and mass. A 20% gravo-aeroelastically scaled wind turbine blade is developed successfully that satisfies these competing objectives. First, it achieved close agreement for non-dimensional tip deflection and flap-wise blade frequency (both within 2.1%) with a blade mass distribution constrained to produce target gravitational and centrifugal loads. Second, the entire blade structure was optimized to ensure a safe, manufacturable solution meeting strict strength requirements for a testing site that can experience up to 45 m/s wind gusts. The prototype-scale blade was fabricated and successfully proof-load tested.

17 WIND ENERGY↗

DOE OSTI2023

Multiscale Reactive Model for 1,3,5-Triamino-2,4,6-trinitrobenzene Inferred by Reactive MD Simulations and Unsupervised Learning

When high-energy-density materials are subjected to thermal or mechanical insults at extreme conditions (shock loading), a coupled response between the thermo-mechanical and chemical behaviors is systematically induced. Herein we develop a reaction model for the fast chemistry of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) at the mesoscopic scale, where the chemical behavior is determined by underlying microscopic reactive simulations. The slow carbon cluster formation is not discussed in the present work. All-atom reactive molecular dynamics (MD) simulations are performed with the ReaxFF potential, and a reduced-order chemical kinetics model for TATB is fitted to isothermal and adiabatic simulations of single crystal chemical decomposition. Unsupervised machine learning techniques based on non-negative matrix factorization are applied to MD trajectories to model the decomposition kinetics of TATB in terms of a four-component model. The associated heats of reaction are fit to the temperature evolution from adiabatic decomposition trajectories. Using a chemical species analysis, we show that non-negative matrix factorization captures the main chemical decomposition steps of TATB and provides an accurate estimation of their evolution with temperature. The final analytical formulation, coupled to a diffusion term, is incorporated into a continuum formalism, and simulation results are compared one-to-one against MD simulations of 1D reaction propagation along different crystallographic directions and with different initial temperatures. A good agreement is found for both the temporal and spatial evolution of the temperature field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Understanding the structural mechanics of ligated DNA crystals via molecular dynamics simulation

DNA self-assembly is a highly programmable method to construct arbitrary architectures based on sequence complementarity. Among various constructs, DNA crystals are macroscopic crystalline materials formed by assembling motifs via sticky end association. Due to their high structural integrity and size ranging from tens to hundreds of micrometers, DNA crystals offer unique opportunities to study the structural properties and deformation behaviors of DNA assemblies. For example, enzymatic ligation of sticky ends can selectively seal nicks resulting in more robust structures with enhanced mechanical properties. However, the research efforts have been mostly on experiments involving different motif designs, structural optimization, or new synthesis methods, while their mechanics are not yet fully understood. The complex properties of DNA crystals are difficult to study via experiments alone, and numerical simulation can complement and aid the experiments. The coarse-grained molecular dynamics (MD) simulation is a powerful tool that can probe the mechanics of DNA assemblies. Here, we investigate DNA crystals made of four different motif lengths with various ligation patterns (full ligation, major directions, connectors, and in-plane) using oxDNA, an open-source, coarse-grained MD platform. We found that several distinct deformation stages emerge in response to mechanical loading and that the number and the location of ligated nucleotides can significantly modulate structural behaviors. These findings should be useful for predicting crystal properties and thus improving the design.

DNA crystal↗

DOE OSTI2014

On the calculation of internal forces in mechanically stressed polyatomic molecules

We discuss how to define and to compute internal forces in a molecule subjected to mechanical stress. Because of the inherently many-body character of intramolecular interactions, internal forces cannot be uniquely defined without specifying a set of internal coordinates used to describe the molecular structure. When such a set is comprised of 3N − 6 interactomic distances (N being the number of atoms) and includes the bond lengths of interest, we show that the associated forces, while satisfying the equation F = ∂V/∂R (where R is the bond length, F is the internal force in this bond, and V is the potential energy of the molecule), can be determined from the molecular geometry alone. We illustrate these ideas using several toy models ranging from small molecules to a graphene sheet and show that the magnitude of the internal force in a bond is not necessarily a good predictor of its strength in response to mechanical loading. At the same time, analysis of internal forces reveals interesting phenomena such as the force multiplication effect, where weak external forces may, e.g., be used to break strong bonds, and offers insight into the catch-bond phenomenon where chemical reactivity is suppressed through application of a force.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

Understanding and predicting damage and failure at grain boundaries in BCC Ta

Understanding the effect of grain boundaries (GBs) on the deformation and spall behavior is critical to designing materials with tailored failure responses under dynamic loading. This understanding is hampered by the lack of in situ imaging capability with the optimum spatial and temporal resolution during dynamic experiments, as well as by the scarcity of a systematic data set that correlates boundary structure to failure, especially in BCC metals. To fill in this gap in the current understanding, molecular dynamics simulations are performed on a set of 74 bi-crystals in Ta with a [110] symmetric tilt axis. Our results show a correlation between GB misorientation angle and spall strength and also highlight the importance of GB structure itself in determining the spall strength. Specifically, we find a direct correlation between the ability of the GB to plasticity deform through slip/twinning and its spall strength. Additionally, a change in the deformation mechanism from dislocation-meditated to twinning-dominated plasticity is observed as a function of misorientation angles, which results in lowered spall strengths for high-angle GBs.

Chen, J. (ORCID:000000018633229X)↗

DOE OSTI2025

Heterogeneous energetic material damage simulator (HEDS): A deep learning approach to simulate damage–sensitivity linkages

Damage in the microstructures of energetic materials (EMs), such as propellants and plastic bonded explosives (PBXs), can significantly alter their response to external loads. Both sensitization and desensitization can occur, causing concerns with safety and performance in the field; predictive models that connect damage and the sensitivity of EMs can enable design and provide confidence in their robustness and reliability. However, modeling of damage evolution is challenging for real microstructures of EMs; samples of damaged EMs are difficult to obtain, thereby hindering experiments and direct numerical simulations to determine the sensitivity of EMs at various stages of damage. Here, we develop an approach to generate synthetic, i.e., in silico produced, damaged microstructures for use in simulations to connect damage levels to sensitivity. The development of the present workflow to generate and impose varying levels of damage in microstructures, known as HEDS (Heterogeneous Energetic Material Damage Simulator), begins with a small set of images of damaged PBXs and combines a collection of deep neural network techniques to generate microstructures with varying levels of damage. By making the synthetic microstructures conform closely to those observed in available real, imaged microstructures, we develop an ensemble of damaged microstructures that can be used for in silico shock experiments. HEDS develops these microstructure ensembles as level set fields, which are directly employed in a sharp interface Eulerian hydrocode where shock simulations are performed to quantify the energy release rate from hotspot fields generated in the microstructure. These capabilities can be useful for the analysis and assessment of changes in the sensitivity of EMs and to design formulations that are less susceptible to damage-induced changes in sensitivity and performance.

Fang, Irene (ORCID:0009000844557122)↗

DOE OSTI2024

Weather Sensitive High Spatio-Temporal Resolution Transportation Electric Load Profiles For Multiple Decarbonization Pathways

Electrification of transport compounded with climate change will transform hourly load profiles and their response to weather. We present a novel approach to generating hourly electric load profiles that considers charging strategies and evolving sensitivity to temperature. The approach consists of downscaling annual state-scale sectoral load projections from the multisectoral Global Change Analysis Model (GCAM) into hourly electric load profiles leveraging high resolution climate and population datasets. Profiles are developed and evaluated at the Balancing Authority scale, with a 5-year increment until 2050 over the Western U.S. Interconnect for multiple decarbonization pathways and climate scenarios. The datasets are readily available for production cost model analysis. Our open source approach is transferable to other regions.

Decarbonization, tranportation, Electric vehicle c↗

DOE OSTI2022

Sizing Considerations for EV Dynamic Wireless Charging Systems with Integrated Energy Storage

Roadways with dynamic wireless charging systems (DWCS) enable charge-sustaining in-motion EV charging, which can reduce charging idle time while increasing range capabilities. Spatially distributed transmitter coils are controlled in response to traffic load that varies significantly minute to minute with high power levels, very short charging time, and low system utilization like wind turbine power. Traffic load estimation and localized analysis may guide effective sizing and topology adoption for feasible and scalable DWCS deployment. DWCS traffic load approximation is reviewed with measured Automated Traffic Recorder (ATR) data and statistical distributions being used to create a synthetic load analyzed using proposed metrics quantifying system utilization over time. Lumped coil section segmentation is compared between second-based distance and spatial density analysis methods, offering 17-27% greater system utilization. A peak load shifting method is proposed for traffic redirection across two tracks with optional BESS integration increasing system utilization by 50-60% depending on time-based and power reserve-based sizing and control.

Lewis, Donovin D.↗

DOE OSTI2015

Generalized Aggregation and Coordination of Residential Loads in a Smart Community

Flexibility from residential loads presents an enormous potential to provide various services to the smart grid. In this paper, we propose a unified hierarchical framework for aggregation and coordination of various residential loads in a smart community, such as Thermostatically Controlled Loads (TCLs), Distributed Energy Storages (DESs), residential Pool Pumps (PPs), and Electric Vehicles (EVs). A central idea of this framework is a virtual battery model, which provides a simple and intuitive tool to aggregate the flexibility of distributed loads. Moreover, a multi-stage Nash-bargainingbased coordination strategy is proposed to coordinate different aggregations of residential loads for demand response. Case studies are provided to demonstrate the efficacy of our proposed framework and coordination strategy in managing peak power demand in a smart residential community.

Hao, He↗

DOE OSTI2020

A Station-hybrid HVDC System Structure and Control Strategies for Cross-seam Power Transmission

Cross-seam high voltage DC (HVDC) transmission in the United States can provide an efficient and flexible bulk power delivery highway between the interconnections. Recent studies have shown significant economic benefits of cross-seam HVDC transmission systems by taking the advantages of load diversity, frequency response, renewable energy diversity, and energy arbitrage in the different interconnections. This paper introduces a station-hybrid system scheme for cross-seam interconnections. Here, the proposed station-hybrid system combines the advantages of line commutated converter (LCC) and voltage source converter (VSC) technologies, thus enabling reliable and flexible bidirectional power flows across the interconnections. Control strategies of the station-hybrid system are investigated with a focus on power flow reversal control under normal operation conditions and grid support control under emergency conditions. The feasibility and effectiveness of the proposed station-hybrid system and corresponding control strategies are verified by simulations in PSCAD/EMTDC.

Station-hybrid system↗

DOE OSTI2019

Hydrodynamic Load Modeling for Offshore Free-Floating Macroalgal Aquaculture under Extreme Environmental Conditions

This article describes a preliminary study of an on-going ARPA-E (Advanced Research Projects Agency-Energy) MARINER Phase I project. The hydrodynamic load and dynamic response of an innovative offshore macroalgae cultivation system, Nautical Offshore Macroalgal Autonomous Device (NOMAD), under extreme environmental conditions is examined. The high strength, extremely durable, recyclable carbon fiber (rCF) free-floating long-line is applied with polyculture (Nereocystis luetkeana (bull kelp) and Saccharina latissima (sugar kelp)) in the NOMAD system. This novel macroalgal farming system is designed to free float from Washington State to California along the west coast of the US to avoid anchoring costs and the failure of earlier offshore growth trials. In this study, we expect to identify possible failure modes for the preliminarily design of NOMAD free-floating long-line macroalgal farming system based on the preliminary numerical predictions. We developed a 1km system-scale NOMAD free-floating long-line numerical model and performed a dynamic response analysis on the long-line to determine the behaviors of the long-line under extreme environmental conditions. The 1km free-floating rCF long-line responses very flexible due to wave and current activities even for large bending stiffness. Therefore, the potential entanglement of free-floating long-line on a global scale may cause the system failure even when the tensions and bending moments are in the safe range. Three cases include 10m NOMAD free-floating long-line with sugar kelp, bull kelp, and polyculture numerical models are developed, and the simulation results are analyzed. The tensions at the holdfast of the kelps in these cases are found to be below the breakage limit approximately. However, the severe clumping of the kelps and potential entanglement of adjacent lines may result in damage to the farming system.

kelp, macroalgae, modeling↗

DOE OSTI2022

Infrasound direction of arrival determination using a balloon-borne aeroseismometer

Free-floating balloons are an emerging platform for infrasound recording, but they cannot host arrays sufficiently wide for multi-sensor acoustic direction finding techniques. Because infrasound waves are longitudinal, the balloon motion in response to acoustic loading can be used to determine the signal azimuth. This technique, called “aeroseismometry,” permits sparse balloon-borne networks to geolocate acoustic sources. This is demonstrated by using an aeroseismometer on a stratospheric balloon to measure the direction of arrival of acoustic waves from successive ground chemical explosions. A geolocation algorithm adapted from hydroacoustics is then used to calculate the location of the explosions.

47 OTHER INSTRUMENTATION↗

DOE OSTI2015

Multi-period Nash bargaining for Coordination of Distributed Energy Resources

Flexibility from distributed energy resources presents an enormous potential to provide various services to the smart grid. In this paper, we propose a unified hierarchical framework for aggregation and coordination of various flexible loads, such as commercial building Heating, Ventilation, and Air-Conditioning (HVAC) systems, Thermostatically Controlled Loads (TCLs), Distributed Energy Storages (DESs), residential Pool Pumps (PPs), and Electric Vehicles (EVs). Moreover, a multistage Nash-bargaining-based control strategy is proposed to coordinate different aggregations of flexible loads for demand response. Case studies are provided to demonstrate the efficacy of our proposed framework and coordination strategy in managing peak power demand in a community.

Hao, He↗

DOE OSTI2012

Developing Simplified Models of Wind Turbine Blades

Simplified beam models provide a computationally efficient method for modeling the vibration of wind turbine blades. The purpose of this paper is to demonstrate the process of developing a simplified beam model of the CX-100 wind turbine blade, and quantifying its predictive capability. The motivation for this study is rooted in the development of NLBeam, a non-linear beam code developed at Los Alamos National Laboratory to simulate the structural dynamics response of wind turbines using the geometrically exact beam theory in a coupled atmospheric hydrodynamics solver. Verification activities used to assess the credibility of NLBeam are investigated. Two models of the CX-100 blade are compared: (1) a three dimensional shell model and (2) a simplified one-dimensional beam model. Two sets of experimental modal data are utilized, one with the CX-100 blade in a fixed-free condition, and one with the CX-100 blade in a fixed-free condition, with large masses applied. By exploring these different configurations of the wind turbine blade, credibility can be established regarding the ability of the FE model to predict the response to different loading conditions. Through the use of test-analysis correlation, the experimental data can be compared to model output and an assessment is given of the predictive capability of the model.

17 WIND ENERGY↗

DOE OSTI2013

Development of Plasticity Model Using Non-Associated Flow Rule for HCP Materials Including Zirconium for Nuclear Applications

In this report (prepared in collaboration with Prof. Jeong Whan Yoon, Deakin University, Melbourne, Australia) a research effort was made to develop a non associated flow rule for zirconium. Since Zr is a hexagonally close packed (hcp) material, it is impossible to describe its plastic response under arbitrary loading conditions with any associated flow rule (e.g. von Mises). As a result of strong tension compression asymmetry of the yield stress and anisotropy, zirconium displays plastic behavior that requires a more sophisticated approach. Consequently, a new general asymmetric yield function has been developed which accommodates mathematically the four directional anisotropies along 0 degrees, 45 degrees, 90 degrees, and biaxial, under tension and compression. Stress anisotropy has been completely decoupled from the r value by using non associated flow plasticity, where yield function and plastic potential have been treated separately to take care of stress and r value directionalities, respectively. This theoretical development has been verified using Zr alloys at room temperature as an example as these materials have very strong SD (Strength Differential) effect. The proposed yield function reasonably well models the evolution of yield surfaces for a zirconium clock rolled plate during in plane and through thickness compression. It has been found that this function can predict both tension and compression asymmetry mathematically without any numerical tolerance and shows the significant improvement compared to any reported functions. Finally, in the end of the report, a program of further research is outlined aimed at constructing tensorial relationships for the temperature and fluence dependent creep surfaces for Zr, Zircaloy 2, and Zircaloy 4.

42 ENGINEERING↗

DOE OSTI2013

Fracture Toughness Prediction for MWCNT Reinforced Ceramics

This report describes the development of a micromechanics model to predict fracture toughness of multiwall carbon nanotube (MWCNT) reinforced ceramic composites to guide future experimental work for this project. The modeling work described in this report includes (i) prediction of elastic properties, (ii) development of a mechanistic damage model accounting for matrix cracking to predict the composite nonlinear stress/strain response to tensile loading to failure, and (iii) application of this damage model in a modified boundary layer (MBL) analysis using ABAQUS to predict fracture toughness and crack resistance behavior (R-curves) for ceramic materials containing MWCNTs at various volume fractions.

36 MATERIALS SCIENCE↗

DOE OSTI2013

Uranium Adsorption on Granular Activated Carbon – Batch Testing

The uranium adsorption performance of two activated carbon samples (Tusaar Lot B-64, Tusaar ER2-189A) was tested using unadjusted source water from well 299-W19-36. These batch tests support ongoing performance optimization efforts to use the best material for uranium treatment in the Hanford Site 200 West Area groundwater pump-and-treat system. A linear response of uranium loading as a function of the solution-to-solid ratio was observed for both materials. Kd values ranged from ~380,000 to >1,900,000 ml/g for the B-64 material and ~200,000 to >1,900,000 ml/g for the ER2-189A material. Uranium loading values ranged from 10.4 to 41.6 μg/g for the two Tusaar materials.

36 MATERIALS SCIENCE↗