Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “inversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Enhanced photoelectrochemical and photocatalytic activity in visible-light-driven Ag/BiVO{sub 4} inverse opals

BiVO{sub 4} photonic crystal inverse opals (io-BiVO{sub 4}) with highly dispersed Ag nanoparticles (NPs) were prepared by the nanosphere lithography method combining the pulsed current deposition method. The incorporation of the Ag NPs can significantly improve the photoelectrochemical and photocatalytic activity of BiVO{sub 4} inverse opals in the visible light region. The photocurrent density of the Ag/io-BiVO{sub 4} sample is 4.7 times higher than that of the disordered sample without the Ag NPs, while the enhancement factor of the corresponding kinetic constant in photocatalytic experiment is approximately 3. The improved photoelectrochemical and photocatalytic activity is benefited from two reasons: one is the enhanced light harvesting owing to the coupling between the slow light and localized surface plasmon resonance effect; the other is the efficient separation of charge carriers due to the Schottky barriers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Separating inverse spin Hall voltage and spin rectification voltage by inverting spin injection direction

We develop a method for universally resolving the important issue of separating the inverse spin Hall effect (ISHE) from the spin rectification effect (SRE) signal. This method is based on the consideration that the two effects depend on the spin injection direction: The ISHE is an odd function of the spin injection direction while the SRE is independent on it. Thus, the inversion of the spin injection direction changes the ISHE voltage signal, while the SRE voltage remains. It applies generally to analyzing the different voltage contributions without fitting them to special line shapes. This fast and simple method can be used in a wide frequency range and has the flexibility of sample preparation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Periodic domain inversion in x-cut single-crystal lithium niobate thin film

We report the fabrication of periodically poled domain patterns in x-cut lithium niobate thin-film. Here, thin films on insulator have drawn particular attention due to their intrinsic waveguiding properties offering high mode confinement and smaller devices compared to in-diffused waveguides in bulk material. In contrast to z-cut thin film lithium niobate, the x-cut geometry does not require back electrodes for poling. Further, the x-cut geometry grants direct access to the largest nonlinear and electro-optical tensor element, which overall promises smaller devices. The domain inversion was realized via electric field poling utilizing deposited aluminum top electrodes on a stack of LN thin film/SiO{sub 2} layer/Bulk LN, which were patterned by optical lithography. The periodic domain inversion was verified by non-invasive confocal second harmonic microscopy. Our results show domain patterns in accordance to the electrode mask layout. The second harmonic signatures can be interpreted in terms of spatially, overlapping domain filaments which start their growth on the +z side.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The relaxation matrix for symmetric tops with inversion symmetry. I. Effects of line coupling on self-broadened ν 1 and pure rotational bands of NH 3

Line mixing effects have been calculated in the ν 1 parallel band of self-broadened NH 3 . The theoretical approach is an extension of a semi-classical model to symmetric-top molecules with inversion symmetry developed in the companion paper [Q. Ma and C. Boulet, J. Chem. Phys. 144, 224303 (2016)]. This model takes into account line coupling effects and hence enables the calculation of the entire relaxation matrix. A detailed analysis of the various coupling mechanisms is carried out for Q and R inversion doublets. The model has been applied to the calculation of the shape of the Q branch and of some R manifolds for which an obvious signature of line mixing effects has been experimentally demonstrated. Comparisons with measurements show that the present formalism leads to an accurate prediction of the available experimental line shapes. Discrepancies between the experimental and theoretical sets of first order mixing parameters are discussed as well as some extensions of both theory and experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The relaxation matrix for symmetric tops with inversion symmetry. II. Line mixing effects in the ν 1 band of NH 3

Line mixing effects have been calculated in the ν 1 parallel band of self-broadened NH 3 . The theoretical approach is an extension of a semi-classical model to symmetric-top molecules with inversion symmetry developed in the companion paper [Q. Ma and C. Boulet, J. Chem. Phys. 144, 224303 (2016)]. This model takes into account line coupling effects and hence enables the calculation of the entire relaxation matrix. A detailed analysis of the various coupling mechanisms is carried out for Q and R inversion doublets. The model has been applied to the calculation of the shape of the Q branch and of some R manifolds for which an obvious signature of line mixing effects has been experimentally demonstrated. Comparisons with measurements show that the present formalism leads to an accurate prediction of the available experimental line shapes. Discrepancies between the experimental and theoretical sets of first order mixing parameters are discussed as well as some extensions of both theory and experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gate-tunable rectification inversion and photovoltaic detection in graphene/WSe{sub 2} heterostructures

We studied electrical transport properties including gate-tunable rectification inversion and polarity inversion, in atomically thin graphene/WSe{sub 2} heterojunctions. Such engrossing characteristics are attributed to the gate tunable mismatch of Fermi levels of graphene and WSe{sub 2}. Also, such atomically thin heterostructure shows excellent performances on photodetection. The responsivity of 66.2 mA W{sup −1} (without bias voltage) and 350 A W{sup −1} (with 1 V bias voltage) can be reached. What is more, the devices show great external quantum efficiency of 800%, high detectivity of 10{sup 13} cm Hz{sup 1/2}/W, and fast response time of 30 μs. Our study reveals that vertical stacking of 2D materials has great potential for multifunctional electronic and optoelectronic device applications in the future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inverse and normal magnetocaloric effects in LaFe{sub 12}B{sub 6}

Intrinsic magnetic properties and magnetocaloric effect were studied for LaFe{sub 12}B{sub 6} itinerant-electron system, which presents an antiferromagnetic ground state below 36 K. For certain magnetic fields values, LaFe{sub 12}B{sub 6} exhibits a sequence of two successive magnetic transitions: an antiferromagnetic-ferromagnetic (AFM-FM) transition at low temperature followed by a ferromagnetic-paramagnetic transition, leading to normal and inverse magnetocaloric effects, respectively. At finite temperatures, both antiferromagnetic (AFM) and paramagnetic states can be transformed into a ferromagnetic (FM) state via a field-induced metamagnetic transition accompanied with a huge magnetic hysteresis. Moreover, we reveal that, at low temperatures, the magnetization displays abrupt jumps across the first-order AFM-FM transition, giving rise to an unusual and unique staircase-like behavior. LaFe{sub 12}B{sub 6} exhibits both normal magnetocaloric effect around the Curie temperature and large inverse magnetocaloric effect around the AFM-FM transition temperature; for μ{sub 0}ΔH = 7 T, ΔS{sub M} is found to be −6.8 and 19 J kg{sup −1} K{sup −1} around 38 and 8 K, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ferroelectric domain inversion and its stability in lithium niobate thin film on insulator with different thicknesses

Ferroelectric domain inversion and its effect on the stability of lithium niobate thin films on insulator (LNOI) are experimentally characterized. Two sets of specimens with different thicknesses varying from submicron to microns are selected. For micron thick samples (∼28 μm), domain structures are achieved by pulsed electric field poling with electrodes patterned via photolithography. No domain structure deterioration has been observed for a month as inspected using polarizing optical microscopy and etching. As for submicron (540 nm) films, large-area domain inversion is realized by scanning a biased conductive tip in a piezoelectric force microscope. A graphic processing method is taken to evaluate the domain retention. A domain life time of 25.0 h is obtained and possible mechanisms are discussed. Our study gives a direct reference for domain structure-related applications of LNOI, including guiding wave nonlinear frequency conversion, nonlinear wavefront tailoring, electro-optic modulation, and piezoelectric devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced proton acceleration by intense laser interaction with an inverse cone target

The generation and control of high-quality proton bunches using focused intense laser pulse on an inverse cone target is investigated with a set of particle-in-cell simulations. The inverse cone is a high atomic number conical frustum with a thin solid top and open base, where the laser impinges onto the top surface directly, not down the open end of the cone. Results are compared with a simple planar target, where the proton angular distribution is very broad because of transverse divergence of the electromagnetic fields behind the target. For a conical target, hot electrons along the cone wall surface induce a transverse focusing sheath field. This field can effectively suppress the spatial spreading of the protons, resulting in a high-quality small-emittance, low-divergence proton beam. A slightly lower proton beam peak energy than that of a conventional planar target was also found.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Warhead verification as inverse problem: Applications of neutron spectrum unfolding from organic-scintillator measurements

Verification of future warhead-dismantlement treaties will require detection of certain warhead attributes without the disclosure of sensitive design information, and this presents an unusual measurement challenge. Neutron spectroscopy—commonly eschewed as an ill-posed inverse problem—may hold special advantages for warhead verification by virtue of its insensitivity to certain neutron-source parameters like plutonium isotopics. In this article, we investigate the usefulness of unfolded neutron spectra obtained from organic-scintillator data for verifying a particular treaty-relevant warhead attribute: the presence of high-explosive and neutron-reflecting materials. Toward this end, several improvements on current unfolding capabilities are demonstrated: deuterated detectors are shown to have superior response-matrix condition to that of standard hydrogen-base scintintillators; a novel data-discretization scheme is proposed which removes important detector nonlinearities; and a technique is described for re-parameterizing the unfolding problem in order to constrain the parameter space of solutions sought, sidestepping the inverse problem altogether. These improvements are demonstrated with trial measurements and verified using accelerator-based time-of-flight calculation of reference spectra. Then, a demonstration is presented in which the elemental compositions of low-Z neutron-attenuating materials are estimated to within 10%. These techniques could have direct application in verifying the presence of high-explosive materials in a neutron-emitting test item, as well as other for treaty verification challenges.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Using Poisson-regularized inversion of Bremsstrahlung emission to extract full electron energy distribution functions from x-ray pulse-height detector data

We measured Electron Energy Distribution Functions (EEDFs) from below 200 eV to over 8 keV and spanning five orders-of-magnitude in intensity, produced in a low-power, RF-heated, tandem mirror discharge in the PFRC-II apparatus. The EEDF was obtained from the x-ray energy distribution function (XEDF) using a novel Poisson-regularized spectrum inversion algorithm applied to pulse-height spectra that included both Bremsstrahlung and line emissions. The XEDF was measured using a specially calibrated Amptek Silicon Drift Detector (SDD) pulse-height system with 125 eV FWHM at 5.9 keV. Finally, the algorithm is found to out-perform current leading x-ray inversion algorithms when the error due to counting statistics is high.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Adaptive inverse ray-tracing for accurate and efficient modeling of cross beam energy transfer in hydrodynamics simulations

Integrated hydrodynamics simulations of inertial confinement fusion rely on reduced physics models. To reproduce experimental trends, these models often feature tuning parameters, but this comes with a risk: the over-tuning of one model can hide physics inadequacies in another. The ray-based models of cross-beam-energy transfer (CBET) represent this risk. In this paper, we present an accurate and efficient model of CBET suitable for inline implementation in 3D hydrodynamics simulations. Inverse Ray Tracing (IRT) is used to compute the ray field in a 3D permittivity profile described on an unstructured tetrahedral mesh using the Inline Field Reconstruction and Interaction using Inverse Tracing framework. CBET is accounted for through perturbations to the permittivity associated with ion acoustic waves driven by the overlapped fields. Large gradients in the permittivity are resolved by coupling the IRT to a recursive Adaptive Mesh Refinement (AMR) algorithm. The use of AMR also allows for the resolution of caustics, with accurate field reconstruction performed using the Etalon integral method. Comparisons of the model with wave-based solutions from the Laser Plasma Simulation Environment demonstrate its ability to control energy conservation and gain convergence through the AMR depth only, without the use of ad hoc physical models or artificial tuning parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A next-generation inverse-geometry spallation-driven ultracold neutron source

The physics model of a next-generation spallation-driven high-current ultracold neutron (UCN) source capable of delivering an extracted UCN rate of around an order of magnitude higher than the strongest proposed sources, and around three orders of magnitude higher than existing sources, is presented. This UCN-current-optimized source would dramatically improve cutting-edge UCN measurements that are currently statistically limited. A novel “Inverse Geometry” design is used with 40 l of superfluid 4He (He-II), which acts as the converter of cold neutrons to UCNs, cooled with state-of-the-art subcooled cryogenic technology to ∼1.6K. Our source design is optimized for a 100 W maximum heat load constraint on the He-II and its vessel. In this paper, we first explore modifying the Lujan Center Mark-3 target for UCN production as a benchmark. In our Inverse Geometry, the spallation target is wrapped symmetrically around the cryogenic UCN converter to permit raster scanning the proton beam over a relatively large volume of tungsten spallation target to reduce the demand on the cooling requirements, which makes it reasonable to assume that water edge-cooling only is sufficient. Our design is refined in several steps to reach a UCN production rate PUCN=2.1×109s−1 under our other restriction of 1MW maximum available proton beam power. We then study the effects of the He-II scattering kernel used as well as reductions in PUCN due to pressurization to reach PUCN=1.8×109s−1. Finally, we provide a design for the UCN extraction system that takes into account the required He-II heat transport properties and implementation of a He-II containment foil that allows UCN transmission. We estimate a total useful UCN current from our source of Ruse≈5×108s−1 from an 18cm diameter guide ∼5m from the source. Under a conservative “no return” (or “single passage”) approximation, this rate can produce an extracted density of >1×104UCNcm−3 in <1000l external experimental volumes with a 58Ni (335neV) cutoff potential.

Leung, K. K. H. (ORCID:0000000203285326)↗

Temperature dependent inverse spin Hall effect in Co/Pt spintronic emitters

In bilayers of ferromagnets and heavy metals, which form the so-called spintronic emitters, the phenomena of ultrafast demagnetization and the inverse spin Hall effect (ISHE) conspire to yield remarkably efficient emission of electric pulses in the THz band. Light-induced demagnetization of the ferromagnet launches a pulse of spin current into the heavy metal, wherein it bifurcates into a radiative charge transient due to the ISHE. The influence of temperature on this combined effect should depend on both the magnetic phase diagram and the microscopic origin of spin Hall conductivity, but its exact dependence remains to be clarified. Here, we experimentally study the temperature dependence of an archetypal spintronic emitter, the Co/Pt bilayer, using electro-optic sampling of the emitted THz pulses in the time domain. The emission amplitude is attenuated with decreasing temperature, consistent with an inverse spin Hall effect in platinum of predominantly intrinsic origin.

Physics↗

Two-dimensional plasma density evolution local to the inversion layer during sawtooth crash events using Beam Emission Spectroscopy

Here, we present methods for analyzing Beam Emission Spectroscopy (BES) data to obtain the plasma density evolution associated with rapid sawtooth crash events at the DIII-D tokamak. BES allows coverage over a 2D spatial plane, inherently local measurements, with fast time responses, and, therefore, provides a valuable new channel for data during sawtooth events. A method is developed to remove sawtooth-induced edge-light pulses contained in the BES data. The edge light pulses appear to be from the D α emission produced by edge recycling during sawtooth events, and are large enough that traditional spectroscopic filtering and data analysis techniques are insufficient to deduce physically meaningful quantities. A cross-calibration of 64 BES channels is performed by using a novel method to ensure accurate measurements. For the large-amplitude density oscillations observed, we discuss and use the non-linear relationship between the BES signal δI/ I 0 and the plasma density variation δn e / n e0 . The 2D BES images cover an 8 × 20 cm 2 region around the sawtooth inversion layer and show large-amplitude density oscillations, with additional significant spatial variations across the inversion layer that grows and peaks near the time of the temperature crash. The edge light removal technique and method of converting large-amplitude δI/ I 0 to δn e / n e0 presented here may help analyze other impulsive MHD phenomena in tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evaluation of the Abel inversion integral in O-mode plasma reflectometry using Chebyshev–Gauss quadrature

The Abel transform is often used to reconstruct plasma density profiles from O-Mode polarized reflectometry diagnostics. However, standard numerical trapezoidal evaluation of the Abel inversion integral can be computationally expensive for a large number of evaluation points, and an endpoint singularity exists on the upper-bound of the integral, which can result in an increased error. In this work, Chebyshev–Gauss quadrature is introduced as a new method to evaluate the Abel inversion integral for the problem of O-Mode plasma reflectometry. Here, the method does not require numerical evaluation of an integral singularity and is shown to have similar accuracy compared to existing methods while being computationally efficient.

47 OTHER INSTRUMENTATION↗

Accelerating and stabilizing the convergence of vibrational self-consistent field calculations via the direct inversion of the iterative subspace (vDIIS) algorithm

The vibrational self-consistent field (VSCF) method yields anharmonic states and spectra for molecular vibrations, and it serves as the starting point for more sophisticated correlated-vibration methods. Convergence of the iterative, non-linear optimization in VSCF calculations can be erratic or altogether unsuccessful, particularly for chemical systems involving low-frequency motions. In this work, a vibrational formulation of the Direct Inversion of the Iterative Subspace method of Pulay is presented and investigated. This formulation accounts for distinct attributes of the vibrational and electronic cases, including the expansion of each single-mode vibrational wavefunction in its own basis set. The resulting Direct Inversion of the Iterative Subspace method is shown to substantially accelerate VSCF convergence in all convergent cases as well as rectify many cases where Roothaan-based methods fail. Performance across systems ranging from small, rigid molecules to weakly bound molecular clusters is investigated in this analysis.

Chemistry↗

Supersonically expanded sodium metal-dilute halogen gas interactions. The importance of reaction populated and energy storing reservoir states and population inversion created amplification in Na2

The reactions of Cl, Br, and I with Nan=2,3 produced in a supersonic expansion form Na2* and Na* excited states extending across the visible and ultraviolet regions. Emission in the region extending from 410 to 600 nm indicates selectively formed excited state Na2 emission features. Experimental evidence suggests that this emission is associated with Na3 + X reactions. Broadband (0.5 cm−1) laser measurements demonstrate gain (population inversion) for select features at∼524–528(1%), ∼492(0.3%), and ∼458.7–461(0.8%) nm. Single mode (0.007 cm−1) measurements extending from 528.03 to 527.63 nm demonstrate amplification involving five to six individual rovibronic levels with a maximum gain close to 3% recorded at 527.9 nm. The observed gain is associated with select transitions from levels of the Na2 11Πu state populated, via identified curve crossings, through collision induced transfer from long-lived Na2 21Σg+ and 11Πg reservoir states. Collision induced population buildup in the lowest vibrational levels of these reservoir states and collision induced transfer to the Na2 11Πu state create a population inversion in transitions to the X 1Σg+ state of Na2. The observed amplification is aided by rapid vibrational and rotational relaxation in both the Na2 ground and excited reservoir states producing amplifiers in the visible region like the HF amplifier in the infrared. This study suggests the importance of reaction populated and energy storing long-lived reservoir states in small sodium molecule combustion processes and indicates the potential for providing new short wavelength visible and ultraviolet amplifiers for future laser-based chemical propulsion concepts.

Chemistry↗