Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “impact study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Measurement of Convective Heat Transfer Coefficients With Supercritical CO 2 Using the Wilson-Plot Technique

This paper describes the measurement of convective heat transfer coefficients and friction factors for sCO 2 flowing in a smooth tube and compares the results with published correlations for validation. The paper also describes the Heat Exchange and Experimental Testing (HEET) rig recently designed and built at the U.S. Department of Energy’s (DoE’s) National Energy Technology Laboratory (NETL) in Morgantown, WV. Here, the Wilson-plot technique used for measuring the heat transfer coefficients is described along with the data reduction process. The Wilson-plot technique was chosen as the basis for the design of NETL’s HEET rig. Advantages of the Wilson-plot technique include the (1) ability to measure high convective heat transfer coefficients accurately, (2) ability to measure average heat transfer coefficient for complicated heat exchange geometries like those produced using additive manufacturing, (3) ability to measure heat transfer coefficients on both sides of a heat exchanger independently, and (4) simplicity of experimental setup. Capabilities of the HEET rig include pressure to 24 MPa (3500 psig), temperature to 538 °C (1000 °F), mass flow rate to 1.5 kg/s (3 lb/s), and Re to 500,000. The rig is designed to operate with pure CO 2 or a mixture of CO 2 and up to 10% N2 by volume to study the impact of gas mixtures typical of direct-fired sCO 2 power cycles on the convective heat transfer and pressure drop. Preliminary tests in the HEET rig were performed with smooth stainless-steel tube and pure CO 2 , and the results were compared with published correlations for Nusselt number (Nu) and friction factor. Over a Reynolds number (Re) range from 58,000 to 228,000, measured Nu was compared to predictions using the Dittus and Boelter equation (Kreith and Bohn, 1993, “Principles of Heat Transfer, West Publishing Company”) within 5% and measured friction factors were compared to predictions using the McAdams correlation (“McAdams, 1954, “Heat Transmission,” 3rd ed., McGraw Hill, New York)” for smooth tube to be within 5%.

42 ENGINEERING↗
DOE OSTI2021

Sustainable Energy Solutions for Thermal Load in Buildings—Role of Heat Pumps, Solar Thermal, and Hydrogen-Based Cogeneration Systems

Economic and population growth is leading to increased energy demand across all sectors—buildings, transportation, and industry. Adoption of new energy consumers such as electric vehicles could further increase this growth. Sensible utilization of clean renewable energy resources is necessary to sustain this growth. Thermal needs in a building pose a significant challenge to the energy infrastructure. Potential technological solutions to address growing energy demand while simultaneously lowering the carbon footprint and enhancing the grid flexibility are presented in this study. Performance assessment of heat pumps, solar thermal collectors, nonfossil fuel-based cogeneration systems, and their hybrid configurations is reported in this study. The impact of design configuration, coefficient of performance (COP), electric grid’s primary energy efficiency on the key attributes of total carbon footprint, life cycle costs, operational energy savings, and site-specific primary energy efficiency are analyzed and discussed in detail. In conclusion, heat pumps and hydrogen-fueled solid oxide fuel cells (SOFCs) are highly effective building energy resources compared to traditional approaches; however, the carbon intensity of electrical energy and hydrogen production are keys to the overall environmental benefit.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

A Scalable Compact Additively Manufactured Molten Salt to Supercritical Carbon Dioxide Heat Exchanger for Solar Thermal Application

Design of an additively manufactured molten salt (MS) to supercritical carbon dioxide (sCO 2 ) primary heat exchanger (PHE) for solar thermal power generation is presented. The PHE is designed to handle temperatures up to 720 °C on the MS side and an internal pressure of 200 bar on the sCO 2 side. In the core, MS flows through a three-dimensional periodic lattice network, while sCO 2 flows within pin arrays. The design includes integrated sCO 2 headers located within the MS flow, allowing for a counterflow design of the PHE. The sCO 2 headers are configured to enable uniform flow distribution into each sCO 2 plate while withstanding an internal pressure of 200 bar and minimizing obstruction to the flow of MS around it. The structural integrity of the design is verified on additively manufactured (AM) 316 stainless steel sub-scale specimens. An experimentally validated, correlation-based sectional PHE core thermofluidic model is developed to study the impact of flow and geometrical parameters on the PHE performance, with varied parameters including the mass flowrate, surface roughness, and PHE dimensions. A process-based cost model is used to determine the impact of parameter variation on build cost. The model results show that a heat exchanger with a power density of 18.6 MW/m 3 (including sCO 2 header volume) and effectiveness of 0.88 can be achieved at a heat capacity rate ratio of 0.8. As a result, the impact of design and AM machine parameters on the cost of the PHE are assessed.

14 SOLAR ENERGY↗
DOE OSTI2020

In-Cu alloy substrates for low-temperature chemical vapor deposition of Mo2C

Two-dimensional transition metal carbides are promising materials because of their potential for combining the favorable properties of transition metal carbides with the high aspect ratio of two-dimensional materials. Though commonly produced by top-down wet-chemical synthesis methods, synthesis by chemical vapor deposition is being considered because of its ability to achieve large areas, controlled layer thickness, and reduced defect density. Typically, liquid Cu is used as a synthesis substrate, though the high melting temperature of Cu (1085 °C) requires high synthesis temperatures. Thus, alternative substrates have been studied in order to reduce the necessary melting temperature. This work systematically studies the impact of synthesis parameters and substrate composition on the growth of ultrathin Mo2C (∼4–120 nm thick) by chemical vapor deposition on an In-Cu alloy. Mo2C flake size increases, and graphene/Mo2C heterostructures form with an increase in the methane flow rates. Increasing the In composition slightly decreases surface coverage and coalescence but does not appreciably impact the Mo2C flake size. Increasing In content also decreases the alloy substrate melting temperature so that a lower temperature synthesis (800 °C) can be performed. However, the necessary high temperatures for pyrolysis of methane lead to a lower limit for the synthesis temperature, similar to graphene.

Young, Katherine T. (ORCID:0000000285845576)↗
DOE OSTI2020

Diazotrophs Show Signs of Restoration in Amazon Rain Forest Soils with Ecosystem Rehabilitation

Biological nitrogen fixation can be an important source of nitrogen in tropical forests that serve as a major CO 2 sink. Extensive deforestation of the Amazon is known to influence microbial communities and the biogeochemical cycles they mediate. However, it is unknown how diazotrophs (nitrogen-fixing microorganisms) respond to deforestation and subsequent ecosystem conversion to agriculture, as well as whether they can recover in secondary forests that are established after agriculture is abandoned. To address these knowledge gaps, here we combined a spatially explicit sampling approach with high-throughput sequencing of nifH genes. The main objectives were to assess the functional distance decay relationship of the diazotrophic bacterial community in a tropical forest ecosystem and to quantify the roles of various factors that drive the observed changes in the diazotrophic community structure. We observed an increase in local diazotrophic diversity (α-diversity) with a decrease in community turnover (β-diversity), associated with a shift in diazotrophic community structure as a result of the forest-to-pasture conversion. Both diazotrophic community turnover and structure showed signs of recovery in secondary forests. Changes in the diazotrophic community were primarily driven by the change in land use rather than differences in geochemical characteristics or geographic distances. The diazotroph communities in secondary forests resembled those in primary forests, suggesting that at least partial recovery of diazotrophs is possible following agricultural abandonment. IMPORTANCE The Amazon region is a major tropical forest region that is being deforested at an alarming rate to create space for cattle ranching and agriculture. Diazotrophs (nitrogen-fixing microorganisms) play an important role in supplying soil N for plant growth in tropical forests. It is unknown how diazotrophs respond to deforestation and whether they can recover in secondary forests that establish after agriculture is abandoned. Using high-throughput sequencing of nifH genes, we characterized the response of diazotrophs’ β-diversity and identified major drivers of changes in diazotrophs from forest-to-pasture and pasture-to-secondary-forest conversions. Studying the impact of land use change on diazotrophs is important for a better understanding of the impact of deforestation on tropical forest ecosystem functioning, and our results on the potential recovery of diazotrophs in secondary forests imply the possible restoration of ecosystem functions in secondary forests.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Search for low mass dark matter in DarkSide-50: the bayesian network approach

Abstract We present a novel approach for the search of dark matter in the DarkSide-50 experiment, relying on Bayesian Networks. This method incorporates the detector response model into the likelihood function, explicitly maintaining the connection with the quantity of interest. No assumptions about the linearity of the problem or the shape of the probability distribution functions are required, and there is no need to morph signal and background spectra as a function of nuisance parameters. By expressing the problem in terms of Bayesian Networks, we have developed an inference algorithm based on a Markov Chain Monte Carlo to calculate the posterior probability. A clever description of the detector response model in terms of parametric matrices allows us to study the impact of systematic variations of any parameter on the final results. Our approach not only provides the desired information on the parameter of interest, but also potential constraints on the response model. Our results are consistent with recent published analyses and further refine the parameters of the detector response model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

A proof of concept for matchete: an automated tool for matching effective theories

Abstract Studying the impact of new-physics models on low-energy observables necessitates matching to effective field theories at the relevant mass thresholds. We introduce the first public version of , a computer tool for matching weakly-coupled models at one-loop order. It uses functional methods to directly compute all matching contributions in a manifestly gauge-covariant manner, while simplification methods eliminate redundant operators from the output. We sketch the workings of the program and provide examples of how to match simple Standard Model extensions. The package, documentation, and example notebooks are publicly available at https://gitlab.com/matchete/matchete .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Scalable Federated Learning for Scientific Foundation Models on Leadership-Class Systems

Federated learning (FL) at leadership-class HPC systems remains largely unexplored, despite growing interest in deploying federated workflows on modern HPC systems. This paper provides the first system-level empirical characterization of federated fine-tuning of pretrained foundation models on an exascale supercomputer under a multi-node deployment. Using up to 96 concurrent FL clients deployed across Frontier nodes, we study the impact of client scale, model size, data heterogeneity, partial participation, and differential privacy on runtime, communication overhead, and convergence stability. Our results show that pretrained transformer models remain robust to heterogeneity, client dropout, and privacy noise, while system efficiency degrades rapidly with scale as synchronizat and orchestration dominate runtime. We further demonstrate that system-aware execution strategies, including intra-node aggregation and early aggregation, significantly reduce wall-clock time without degrading model quality. These findings establish a practical performance baseline and inform the design of communication-efficient FL systems on leadership-class HPC platforms.

Kotevska, Olivera [ORNL] (ORCID:0000000316772243)↗
DOE OSTI2026

Battery Performance and Cost Model (BatPaC) Version 6.0

SF-26-016 The Battery Performance and Cost model (BatPaC) is a calculation method based on Microsoft Excel spreadsheets that has been developed at Argonne for estimating the performance and manufacturing cost of lithium-ion batteries for electric-drive vehicles including hybrid-electrics (HEV), plug-in hybrids (PHEVs) and pure electrics. BatPaC was first developed in 2007, was subsequently peer reviewed, and it has served Argonne researchers and the greater battery community in studying the impact of material properties on performance at the pack level. BatPaC has been updated and re-released multiple times since its original public release in 2011. This current version is BatPaC 6.0, which contains additional functionality needed to handle advances in automotive batteries, like the use of lithium metal and silicon anodes and the need to accommodate cell expansion and apply high levels of pressure.

KNEHR, KEVIN [Argonne National Laboratory (ANL), A↗
DOE OSTI2022

Evaluation of the Fitch Wind-Farm Wake Parameterization with Large-Eddy Simulations of Wakes Using the Weather Research and Forecasting Model

Abstract Wind-farm parameterizations in weather models can be used to predict both the power output and farm effects on the flow; however, their correctness has not been thoroughly assessed. We evaluate the wind-farm parameterization of the Weather Research and Forecasting Model with large-eddy simulations (LES) of the wake performed with the same model. We study the impact on the velocity and turbulence kinetic energy (TKE) of inflow velocity, roughness, resolution, number of turbines (one or two), and inversion height and strength. We compare the mesoscale with the LES by spatially averaging the LES within areas correspondent to the mesoscale horizontal spacing: one covering the turbine area and two downwind. We find an excellent agreement of the velocity within the turbine area between the two types of simulations. However, within the same area, we find the largest TKE discrepancies because in mesoscale simulations, the turbine-added TKE has to be highest at the turbine position to be advected downwind. Within the downwind areas, differences between velocities increase as the wake recovers faster in the LES, whereas for the TKE both types of simulations show similar levels. From the various configurations, the impact of inversion height and strength is small for these heights and inversion levels. The highest impact for the one-turbine simulations appears under the low-speed case due to the higher thrust, whereas the impact of resolution is low for the large-eddy simulations but high for the mesoscale simulations. Our findings demonstrate that higher-fidelity simulations are needed to validate wind-farm parameterizations.

17 WIND ENERGY↗
DOE OSTI2022

Evaluation of Model Summertime Boundary Layer Cloud Development over Complex Terrain in New York State

Weather forecasting over complex terrain with diverse land cover is challenging. Utilizing the high-resolution observations from New York State Mesonet (NYSM), we are able to evaluate the surface processes of the Weather Research Forecast (WRF) Model in a detailed, scale-dependent manner. Here, in the study, possible impacts of land–atmosphere interaction on surface meteorology and boundary layer cloud development are investigated with different model resolutions, land surface models (LSMs), and planetary boundary layer (PBL) physical parameterizations. The High-Resolution Rapid Refresh, version 3 (HRRR), forecasting model is used as a reference for the sensitivity evaluation. Results show that over complex terrain, the high-resolution simulations (1 km × 60 vertical levels) generally perform better compared to low-resolution (3 km × 50 levels) in both surface meteorology and cloud fields. LSMs play a more important role in surface meteorology compared to PBL schemes. The NoahMP land surface model exhibits daytime warmer and drier biases compared to the Rapid Update Cycle (RUC) due to better prediction of the Bowen ratio in RUC. The PBL schemes would affect the convective strength in the boundary layer. The Shin–Hong (SH) scale-aware scheme tends to produce the strongest convective strength in the PBL, while the ACM2 PBL scheme rarely resolved convection even at 1-km resolution. By considering the radiation effect of subgrid-scale (SGS) clouds, the Mellor–Yamada–Nakanishi–Niino eddy diffusivity mass flux (MYNN-EDMF) predicted the highest cloud coverage and lowest surface solar radiation bias. The configuration of SGS clouds in MYNN-EDMF would not only significantly reduce shortwave radiation bias, but also affect the convection behaviors through land surface–cloud–radiation interaction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Design and execution of a verification, validation, and uncertainty quantification plan for a numerical model of left ventricular flow after LVAD implantation

Left ventricular assist devices (LVADs) are implantable pumps that act as a life support therapy for patients with severe heart failure. Despite improving the survival rate, LVAD therapy can carry major complications. Particularly, the flow distortion introduced by the LVAD in the left ventricle (LV) may induce thrombus formation. While previous works have used numerical models to study the impact of multiple variables in the intra-LV stagnation regions, a comprehensive validation analysis has never been executed. The main goal of this work is to present a model of the LV-LVAD system and to design and follow a verification, validation and uncertainty quantification (VVUQ) plan based on the ASME V&V40 and V&V20 standards to ensure credible predictions. The experiment used to validate the simulation is the SDSU cardiac simulator, a bench mock-up of the cardiovascular system that allows mimicking multiple operation conditions for the heart-LVAD system. The numerical model is based on Alya, the BSC’s in-house platform for numerical modelling. Alya solves the Navier-Stokes equation with an Arbitrary Lagrangian-Eulerian (ALE) formulation in a deformable ventricle and includes pressure-driven valves, a 0D Windkessel model for the arterial output and a LVAD boundary condition modeled through a dynamic pressure-flow performance curve. The designed VVUQ plan involves: (a) a risk analysis and the associated credibility goals; (b) a verification stage to ensure correctness in the numerical solution procedure; (c) a sensitivity analysis to quantify the impact of the inputs on the four quantities of interest (QoIs) (average aortic root flow $Q^{avg}_{Ao}$, maximum aortic root flow $Q^{max}_{Ao}$, average LVAD flow $Q^{avg}_{VAD}$, and maximum LVAD flow $Q^{max}_{VAD}$; (d) an uncertainty quantification using six validation experiments that include extreme operating conditions. Numerical code verification tests ensured correctness of the solution procedure and numerical calculation verification showed a grid convergence index (GCI)95% <3.3%. The total Sobol indices obtained during the sensitivity analysis demonstrated that the ejection fraction, the heart rate, and the pump performance curve coefficients are the most impactful inputs for the analysed QoIs. The Minkowski norm is used as validation metric for the uncertainty quantification. It shows that the midpoint cases have more accurate results when compared to the extreme cases. The total computational cost of the simulations was above 100 [core-years] executed in around three weeks time span in Marenostrum IV supercomputer. This work details a novel numerical model for the LV-LVAD system, that is supported by the design and execution of a VVUQ plan created following recognised international standards. We present a methodology demonstrating that stringent VVUQ according to ASME standards is feasible but computationally expensive.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Model data for a watershed-scale study in the Portage River Basin (OH) examining the effects of subsurface drainage on the hydrologic response of an agricultural watershed.

This study builds on Rathore et al. (2024, WRR) and investigates the role of artificial tile-drainage on various aspects of watershed hydrological response, with a particular focus on peakflow. The model-data for the original modeling-focused paper (Rathore et al., 2024, WRR) is archived at Rathore et al. (2024, ESS-DIVE). Hence, this model-data archive provides scripts that are specific to this study that includes model updates, processing and analysis scripts. For details and models files of original model, readers are referred to Rathore et al. (2024, ESS-DIVE). The key difference between the model configuration in this study and Rathore et al. (2024, WRR) is that the tile drains are applied to the entire domain, to study the impact of tile-drains on different aspects of hydrological response. Additional scenario considering intensified precipitation after a dry period was also simulated. The Watershed Workflow package is implemented in Python3. The Jupyter notebooks can be executed through multiple open-source tools, for example, Anaconda Jupyter Lab, VS Studio Code, etc. Other data files include CSV and HDF5 files, which can be read through Python scripts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Defect-engineered GaN high electron mobility transistors for enhanced radiation tolerance

This study explores the radiation resilience of GaN high-electron-mobility transistors (HEMTs) under various preconditioning treatments—pristine, electro-pulsed, electrically overstressed, and 60 Co gamma-irradiated—with a focus on enhancing survivability in high-radiation environments. Key findings emphasize the gate region’s central role in radiation sensitivity, with increased defect concentrations leading to reduced sensitivity—as determined from reduced single-event transient intensities during pulsed-laser studies—and impacting charge-transport dynamics. Notably, the most sensitive region shifted as a function of bias state, with the drain side of the gate being most sensitive under negative gate bias and the source side under unbiased conditions due to two-dimensional electron gas disruptions. These insights clarify the mechanisms influencing radiation sensitivity in microelectronics and highlight the potential of defect and strain engineering to enhance the radiation hardness of GaN HEMTs across various operational states, providing valuable guidance for applications in space, defense, and other radiation-rich environments.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Adaptive variational quantum minimally entangled typical thermal states for finite temperature simulations

Scalable quantum algorithms for the simulation of quantum many-body systems in thermal equilibrium are important for predicting properties of quantum matter at finite temperatures. Here we describe and benchmark a quantum computing version of the minimally entangled typical thermal states (METTS) algorithm for which we adopt an adaptive variational approach to perform the required quantum imaginary time evolution. The algorithm, which we name AVQMETTS, dynamically generates compact and problem-specific quantum circuits, which are suitable for noisy intermediate-scale quantum (NISQ) hardware. We benchmark AVQMETTS on statevector simulators and perform thermal energy calculations of integrable and nonintegrable quantum spin models in one and two dimensions and demonstrate an approximately linear system-size scaling of the circuit complexity. We further map out the finite-temperature phase transition line of the two-dimensional transverse field Ising model. Finally, we study the impact of noise on AVQMETTS calculations using a phenomenological noise model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Enhancement of EM Pump Performance through Modeling and Testing

Liquid sodium has seen development as a nuclear reactor coolant in the United States for over 50 years. While sodium has many desirable characteristics as a heat transfer fluid, its reactivity poses numerous engineering challenges for even the most basic plant components like pumps. Despite the challenges, mechanical pumps have seen success in sodium service albeit at the expense of simplicity and flexibility. In fact, significant failures of these pumps have been recorded which can be attributed to their complexity. Notwithstanding the complexity, mechanical pumps are still widely proposed for the main circuit pump of sodium cooled reactors. However, an alternative to mechanical pumps are Electromagnetic Induction Pumps (EMIPs) which use the principle of the Lorentz Force. EMIPs avoid mechanically moving parts in contact with sodium which simplifies the design by avoiding mechanical wear and seals. Therefore, these pumps are generally safer and more reliable than their mechanical counterparts. That being said, EMIPs suffer from relatively low efficiencies that range from 5% to 45%. Some of the inefficiencies are inherent to the EMIPs pumps; namely, inefficiencies arise in the form of resistive heating losses in the fluid itself. However, other inefficiencies arise from Edge Effects which include Finite Length and Finite Width effects. Due to the significant safety advantages EMIPs have compared to mechanical pumps, there is a strong motivation to integrate these technologies into the design of Generation IV liquid-metal-cooled nuclear power plants. However, EMIPs have low efficiencies partly attributed to Edge Effects. Much of the literature focusing on Edge Effects is dated or simply does not exist in the public domain. More recently, numerical models of EMIPs have shown promising results. However, these models are often custom solvers or use complex software suits which limit their application. This report describes the work completed to understand Edge Effects in two EMIPs designs. These designs are the Annular Linear Induction Pump (ALIP) and Permanent Magnet Induction Pump (PMIP) also known as a Moving Magnet Pump (MMP). The methodology developed during this project aim at measuring key performance parameters (pressure-flowrate and efficiency-slip performance) using high temperature liquid-sodium. Baseline experimental measurements were then used to verify the accuracy of numerical models developed in the software suit ANSYS/FLUENT. On the experimental side, instrumentation was developed to characterize the pressure-flowrate and efficiency-slip performance of both the ALIP and PMIP in high-temperature liquid-sodium. Additionally, instrumentation was developed to measure potential output pressure pulsations and the magnetic field distributions. Moreover, a specialized ALIP was constructed to study the impacts magnetic field tapering, also known as coil grading, on the Finite Length Effect. Lastly, experimental performance curves of the PMIP were collected at 300 oC and 600 oC and compared to analytical theory which accounted for Finite Width Effects. These results showed that the Finite Width Effect and non-uniform magnetic field in a PMIP impact the performance. On the numerical side, models were developed using the software suit FLUENT/ANSYS. These methods were initially compared against a simple MHD flow in a Permanent Magnet Electromagnet Flowmeter (PMEMFM). The results were significant in that they showed agreeance between the numerical model and demonstrated that PMEMFM’s could be calibrated numerically. These modeling methods were then applied to a prototypic PMIP. Results showed that this simple model provided reasonably accurate results of the PMIP p-Q performance.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Partial support of the Condensed Matter and Materials Research Committee. Final progress report

The Condensed Matter and Materials Research Committee (CMMRC) is one of five standing committees of the National Academies’ Board on Physics and Astronomy (BPA) and is charged with assisting the BPA in achieving its goals—monitoring the health of physics and astronomy, identifying important new developments at the scientific forefronts, fostering interactions with other fields, strengthening connections to technology, facilitating effective service to the nation, and enhancing education in physics. CMMRC carries out its functions in several ways – providing expert advice to the BPA in monitoring the health of condensed matter and materials research and providing perspective on issues that arise in those fields; assisting other National Academies’ boards in developing proposals and initiating studies that impact these fields; providing long-term stewardship of National Academies reports that it has played a role in initiating and that are of importance to the condensed matter and materials research communities, and providing a means for dialog with federal agencies on these and related fields.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Uncertainty Quantification in Scientific ML

The intricate interactions between data sampling, model selection and the inherent randomness in complex systems strongly emphasize the need for a rigorous characterization of ML algorithms. In conventional statistics, uncertainty quantification (UQ) provides this characterization by measuring how accurately a model reflects the physical reality and by studying the impact of different error sources on the prediction.

97 MATHEMATICS AND COMPUTING↗