Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydrate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Back Cover: Influence of Intracrystalline Ionic Strength in MFI Zeolites on Aqueous Phase Dehydration of Methylcyclohexanols (Angew. Chem. Int. Ed. 47/2021)

Here the impact of the concentration of hydrated hydronium ions and in turn of the local ionic strength in MFI zeolites has been investigated for the aqueous phase dehydration of 4-methylcyclohexanol (E1 mechanism) and cis-2-methylcyclohexanol (E2 mechanism). The E2 pathway with the latter alcohol led to a 2.5-fold higher activity. The catalytic activity normalized to the hydronium ions (turnover frequency, TOF) passed through a pronounced maximum, which is attributed to the increasing excess chemical potential of the alcohols in the pores, increasing in parallel with the ionic strength and the additional work caused by repulsive interactions and charge separation induced by the bulky alcohols. While the maximum in rate observed is invariant with the mechanism or substitution, the reaction pathway is influencing the activation parameters differently.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Resolving the Heat Generated from ZrO 2 Atomic Layer Deposition Surface Reactions

Abstract In situ pyroelectric calorimetry and spectroscopic ellipsometry were used to investigate surface reactions in atomic layer deposition (ALD) of zirconium oxide (ZrO 2 ). Calibrated and time‐resolved in situ ALD calorimetry provides new insights into the thermodynamics and kinetics of saturating surface reactions for tetrakis(dimethylamino)zirconium(IV) (TDMAZr) and water. The net ALD reaction heat ranged from 0.197 mJ cm −2 at 76 °C to 0.155 mJ cm −2 at 158 °C, corresponding to an average of 4.0 eV/Zr at all temperatures. A temperature dependence for reaction kinetics was not resolved over the range investigated. The temperature dependence of net reaction heat and distribution among metalorganic and oxygen source exposure is attributed to factors including growth rate, equilibrium surface hydroxylation, and the extent of the reaction. ZrO 2 ‐forming surface reactions were investigated computationally using DFT methods to better understand the influence of surface hydration on reaction thermodynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Zr‐Porphyrin Metal–Organic Framework as nanoreactor for boosting the formation of hydrogen clathrates

Abstract We report the first experimental evidence for rapid formation of hydrogen clathrates under mild pressure and temperature conditions within the cavities of a zirconium‐metalloporphyrin framework, specifically PCN‐222. PCN‐222 has been selected for its 1D mesoporous channels, high water‐stability, and proper hydrophilic behavior. Firstly, we optimize a microwave (MW)‐assisted method for the synthesis of nanosized PCN‐222 particles with precise structure control (exceptional homogeneity in morphology and crystalline phase purity), taking advantage of MW in terms of rapid/homogeneous heating, time and energy savings, as well as potential scalability of the synthetic method. Second, we explore the relevance of the large mesoporous 1D open channels within the PCN‐222 to promote the nucleation and growth of confined hydrogen clathrates. Experimental results show that PCN‐222 drives the nucleation process at a lower pressure than the bulk system (1.35 kbar vs 2 kbar), with fast kinetics (minutes), using pure water, and with a nearly complete water‐to‐hydrate conversion. Unfortunately, PCN‐222 cannot withstand these high pressures, which lead to a significant alteration of the mesoporous structure while the microporous network remains mainly unchanged.

Carrillo‐Carrión, Carolina↗
DOE OSTI2025

Understanding the Benefit of Hybrid Electrolytes towards Vanadium Dissolution Suppression and Improved Capacity Retention in Zinc‐Aqueous Batteries Using NaV 3 O 8 Cathodes

Vanadate cathodes used in aqueous Zn-ion batteries with ZnSO 4 are hindered by capacity loss from V dissolution into the electrolyte. However, studies pinpointing the onset of dissolution as a function of electrochemical redox state and quantifying the amount of associated active material are lacking. To prevent dissolution of the NaV 3 O 8 active material, Na + ions are introduced into the electrolyte. Specifically, a hybrid ZnSO 4 + Na 2 SO 4 electrolyte is investigated in concert with NaV 3 O 8 (NVO) cathodes of varied crystallinity to determine the resulting impacts on cathode dissolution and functional electrochemistry. The use of Na + -containing hybrid electrolyte shows no significant change in Zn 2+ diffusion coefficients yet improved capacity retention. Time-resolved quantitative optical emission spectroscopy demonstrates the suppression of V dissolution with the hybrid electrolyte in both pristine and cycled electrodes. Operando synchrotron X-ray diffraction and absorption provide mechanistic insights. Hydrated NVO with wider interplanar spacing exhibits much higher H + /Zn 2+ capacity, while the Na 2 SO 4 mitigates the formation of irreversible side products. Furthermore, this study demonstrates that the use of hybrid electrolytes and control of crystallite size in the parent material can significantly improve electrochemical behavior of layered V-based cathodes in Zn-ion batteries, providing a general strategy toward safe and resilient aqueous battery systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cation-Specific Electrokinetic Separations Using Prussian Blue Intercalation Reactions

In this work, we report a new approach for forming ion depletion zones (IDZs) using intercalation reactions at an electrochemically controlled Prussian blue (PB) film. The experiments described here were performed using a microfluidic device, wherein a charged fluorophore in solution was used as a proxy to monitor IDZ formation. In the presence of K + , intercalation reactions proceed readily to form an IDZ, and thus enrich the fluorophore up to 37-fold. In the presence of the larger hydrated Li + or tetrabutylammonium (TBA + ) ions, however, ion intercalation proceeded less quickly than with K + . Slower ion intercalation resulted in a weaker IDZ and correspondingly lower enrichment factors of eight- and six-fold, respectively. These results are significant because they show that PB intercalation reactions selectively form an IDZ. Accordingly, we anticipate that these findings will lead to a better understanding and further interesting applications of intercalation materials like PB for efficient and selective enrichment and separations.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Decoupling Proton and Cation Contributions to Capacitive Charge Storage in Birnessite in Aqueous Electrolytes

Abstract Nanostructured birnessite is of interest as an electrode material for aqueous high power electrochemical energy storage as well as desalination devices. In neutral pH aqueous electrolytes, birnessite exhibits a capacitive response attributed to the adsorption of cations and protons at the outer surface and within the hydrated interlayer. Here, we utilize the understanding of proton‐coupled electron transfer (PCET) in buffered electrolytes to decouple the role of protons and cations in the capacitive charge storage mechanism of birnessite at neutral pH. We find that without buffer, birnessite exhibits primarily potential‐independent (capacitive) behavior with excellent cycling stability. Upon the addition of buffer, the capacity initially increases and the cyclic voltammograms become more potential‐dependent, features attributed to the presence of PCET with the birnessite. However, long‐term cycling in the buffered electrolyte leads to significant capacity fade and dissolution, which is corroborated through ex situ characterization. ReaxFF atomistic scale simulations support the observations that proton adsorption leads to birnessite degradation and that capacitive charge storage in birnessite is primarily attributed to cation adsorption at the outer surface and within the interlayer.

Saeed, Saeed↗
DOE OSTI2021

Ready Access to Anhydrous Anionic Lanthanide Acetates by Using Imidazolium Acetate Ionic Liquids as the Reaction Medium

Abstract Access to lanthanide acetate coordination compounds is challenged by the tendency of lanthanides to coordinate water and the plethora of acetate coordination modes. A straightforward, reproducible synthetic procedure by treating lanthanide chloride hydrates with defined ratios of the ionic liquid (IL) 1‐ethyl‐3‐methylimidazolium acetate ([C 2 mim][OAc]) has been developed. This reaction pathway leads to two isostructural crystalline anhydrous coordination complexes, the polymeric [C 2 mim] n [{Ln 2 (OAc) 7 } n ] and the dimeric [C 2 mim] 2 [Ln 2 (OAc) 8 ], based on the ion size and the ratio of IL used. A reaction with an IL : Ln‐salt ratio of 5 : 1, where Ln=Nd, Sm, and Gd, led exclusively to the polymer, whilst for the heaviest lanthanides (Dy−Lu) the dimer was observed. Reaction with Eu and Tb resulted in a mixture of both polymeric and dimeric forms. When the amount of IL and/or the size of the cation was increased, the reaction led to only the dimeric compound for all the lanthanide series. Crystallographic analyses of the resulting salts revealed three different types of metal‐acetate coordination modes where η 2 μκ 2 is the most represented in both structure types.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Mechanistic Insights into the Demethylation of Lignin‐Derived Structures Using Protic Ionic Liquids: A Density Functional Theory Study

Lignin valorization is restricted by the stability of its methoxy groups, creating a critical need for efficient demethylation strategies. Here, in this study, density functional theory (DFT) is employed to dissect the mechanistic pathways of demethylation in lignin model compounds, guaiacol and syringol, using protic ionic liquids (PILs) that act as both solvent and catalyst. Conductor‐like Screening Model for Real Solvents (COSMO‐RS) analysis identifies monoethanolammonium acetate ([MEOA][Ace]) as the most promising medium, attributed to its strong hydrogen bonding network and solvation ability. By integrating implicit and explicit solvation models, it is revealed that an acid‐catalyzed hydrolytic mechanism governs demethylation, with PILs stabilizing crucial transition states and intermediates. Complementary electronic structure evaluations, including highest occupied molecular orbital–lowest unoccupied molecular orbital (HOMO‐LUMO) gap analysis, charge distribution, and electrostatic potential mapping, demonstrate how PILs lower energetic barriers and enhance reactivity. To simulate realistic environments, this study is extended to lignin dimer complexes with varying water content, uncovering how water‐bridged solvation reverses demethylation preference from guaiacyl to syringyl units. This mechanistic shift aligns with experimental observations showing faster S‐unit reactivity in hydrated systems. Together, these findings provide atomic‐level insight into lignin demethylation dynamics and highlight how tuning acid concentration in PILs can accelerate kinetics, enabling a rational pathway toward next‐generation biomass conversion technologies.

COSMO-RS↗
DOE OSTI2025

Trivalent Rare Earth Adsorption at Phosphonic Acid Monolayers

The increasing need for rare earth separations requires a detailed understanding of trivalent ion behavior at charged aqueous interfaces. Here, neodymium (Nd) adsorption on Langmuir monolayers of octadecylphosphonic acid (ODPA), a single‐chain phosphonic acid capable of double deprotonation, at the air/water interface, is investigated. Combining sum frequency generation (SFG) spectroscopy with X‐ray fluorescence near total reflection (XFNTR), both the interfacial water ordering and ion density are examined. Under ambient conditions, Nd ions induce enhanced deprotonation of ODPA headgroups, leading to interfacial ion densities as high as 1 Nd per 30 Å 2 . This adsorption behavior arises from a complex interplay between direct electrostatic interactions, ion pairing, and hydration effects, which cannot be fully captured by classical Gouy–Chapman–Stern models. These insights into trivalent ion adsorption mechanisms provide a pathway toward more effective separation processes for rare earth metals.

adsorptions↗
DOE OSTI2020

Inorganic semiconductor quantum dots as a saturated excitation (SAX) probe for subdiffraction imaging

The photoluminescence (PL) saturation of CdSe/ZnS core/shell inorganic semiconductor quantum dots (QDs) and its utility as a probe for saturated excitation (SAX) microscopy are reported. Under saturating excitation power densities, the PL signal was demodulated and recorded at harmonics of the fundamental frequency. For commercially available Qdot® 655 ITK™ QDs, the power density required to achieve saturation was dependent upon the local environment of the QDs. For QDs deposited and dried on a glass substrate, the excitation power density required for PL saturation was less than 1 kW/cm 2 . Compared to this, saturation of PL for QDs dispersed in water required an excitation power density greater than 200 kW/cm 2 . This observation is manifested as a limitation in the imaging of hydrated samples, as demonstrated for HeLa cells labelled with biotinylated-phalloidin followed by labelling with streptavidin-coated QDs. Finally as saturation affects the obtained spatial resolution in several imaging formats, including confocal imaging, the provided data will aid in obtaining the optimal spatial resolution when using QD probes to image biological samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Dialing in Direct Air Capture of CO 2 by Crystal Engineering of Bis-iminoguanidines

Direct air capture (DAC) technologies that extract carbon dioxide from the atmosphere via chemical processes have the potential to restore the atmospheric CO 2 concentration to an optimal level. This study elucidates structure-property relationships in DAC by crystallization of bis-iminoguanidine (BIG) carbonate salts. Here, their crystal structures are analyzed by X-ray and neutron diffraction to accurately measure key structural parameters including molecular conformations, hydrogen bonding, and π-stacking. Experimental measurements of key properties, such as aqueous solubilities and regeneration energies and temperatures, are complemented by first-principles calculations of lattice and hydration free energies, as well as free energies of reactions with CO 2 , and BIG regenerations. Minor structural modifications in the molecular structure of the BIGs are found to result in major changes in the crystal structures and the aqueous solubilities within the series, leading to enhanced DAC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Determination of the Structures of Lignin Subunits and Nanoparticles in Solution by Small‐Angle Neutron Scattering: Towards Improving Lignin Valorization

Abstract Lignin nanoparticles (LNPs) are usually produced from lignin solution through supersaturation. The structure of the lignin in solution is still poorly understood due to structural variability of isolated lignins. Here, lignins were extracted from different plants to establish a general pattern of their structure in several lignin solvents. Lignin molecules (lignin subunits) and larger aggregates were observed in dimethyl sulfoxide (DMSO), ethylene glycol (EG) and 0.1 N NaOD solutions by small‐angle neutron scattering (SANS). It was proposed that the aggregates were composed of lignin subunits with a higher molecular weight and a higher ratio of the aliphatic to phenolic hydroxyl groups. The size, shape, and compactness are important factors that affect the uses of the LNPs, which were obtained from the SANS data for the first time. A discrepancy in the radius between SANS and DLS was discovered, pointing to a large hydration shell around the LNPs in aqueous solutions. The cytotoxicity of the corncob lignin, kraft lignin, and their LNPs were measured and compared.

Zhang, Xin↗
DOE OSTI2022

Activation of Transition Metal (Fe, Co and Ni)-Oxide Nanoclusters by Nitrogen Defects in Carbon Nanotube for Selective CO 2 Reduction Reaction

The electrochemical carbon dioxide reduction reaction (CO2RR), which can produce value-added chemical feedstocks, is a proton-coupled-electron process with sluggish kinetics. Thus, highly efficient, cheap catalysts are urgently required. Transition metal oxides such as CoO x , FeO x , and NiO x are low-cost, low toxicity, and abundant materials for a wide range of electrochemical reactions, but are almost inert for CO 2 RR. Here, we report for the first time that nitrogen doped carbon nanotubes (N-CNT) have a surprising activation effect on the activity and selectivity of transition metal-oxide (MO x where M = Fe, Ni, and Co) nanoclusters for CO 2 RR. MO x supported on N-CNT, MOx/N-CNT, achieves a CO yield of 2.6–2.8 mmol cm -2 min -1 at an overpotential of -0.55V, which is two orders of magnitude higher than MO x supported on acid treated CNTs (MOx/O-CNT) and four times higher than pristine N-CNT. The faraday efficiency for electrochemical CO 2 -to-CO conversion is as high as 90.3% at overpotential of 0.44V. Both in-situ XAS measurements and DFT calculations disclose that MO x nanoclusters can be hydrated in CO 2 saturated KHCO 3 , and the N defects of N-CNT effectively stabilize these metal hydroxyl species under carbon dioxide reduction reaction conditions, which can split the water molecules and provide local protons to inhibit the poisoning of active sites under carbon dioxide reduction reaction conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Hydrogen Iron Flow Battery with High Current Density and Long Cyclability Enabled Through Circular Water Management

The hydrogen‐iron (HyFe) flow cell has great potential for long‐duration energy storage by capitalizing on the advantages of both electrolyzers and flow batteries. However, its operation at high current density (high power) and over continuous cycling testing has yet to be demonstrated. In this paper, we discuss our design and demonstration of a water management strategy that supports high current and long cycling performance of a HyFe flow cell. Water molecules associated with the movement of protons from the iron electrode to the hydrogen electrode are sufficient to hydrate the membrane and electrode at a low current density of 100 mA cm −2 during the charge process. At higher charge current density, more aggressive measures must be taken to counter back‐diffusion driven by the acid concentration gradient between the iron and hydrogen electrodes. Our water management approach is based on water vapor feeding in the hydrogen electrode, and water evaporation in the iron electrode, thus enabling the high current density operation of 300 mA cm −2 .

25 ENERGY STORAGE↗
DOE OSTI2023

A Hydrogen Iron Flow Battery with High Current Density and Long Cyclability Enabled Through Circular Water Management

The hydrogen‐iron (HyFe) flow cell has great potential for long‐duration energy storage by capitalizing on the advantages of both electrolyzers and flow batteries. However, its operation at high current density (high power) and over continuous cycling testing has yet to be demonstrated. In this article, we discuss our design and demonstration of a water‐management strategy that supports high current and long‐cycling performance of a HyFe flow cell. Water molecules associated with the movement of protons from the iron electrode to the hydrogen electrode are sufficient to hydrate the membrane and electrode at a low current density of 100 mA cm −2 during the charge process. At higher charge current density, more aggressive measures must be taken to counter back‐diffusion driven by the acid concentration gradient between the iron and hydrogen electrodes. Our water‐management approach is based on water vapor feeding in the hydrogen electrode and water evaporation in the iron electrode, thus enabling high current density operation of 300 mA cm −2 .

Yan, Litao↗
DOE OSTI2023

Density Functional Theory Guided Investigation of Ligand‐Induced Neptunyl‐Neptunyl Interactions

Abstract Actinyl‐actinyl interactions are particularly prevalent for the pentavalent neptunyl cation (Np(V)O 2 ) + where these interactions appear either as a T ‐ or D ‐shape (diamond‐shape). T ‐shaped interactions have been previously identified in high concentration Np(V) solutions containing simple anions (NO 3 − , ClO 4 − , Cl − ) whereas D ‐shaped have only been isolated in the solid‐state in the presence of carboxylate ligands. In this study, Density Functional Theory (DFT) calculations were paired with Raman spectroscopy to evaluate the formation of D ‐shaped interactions in the presence of aliphatic (R=H (formate), CH 3 (acetate), CH 2 CH 3 (propionate)) and aromatic (R=C 6 H 5 (benzoate), C 6 H 4 OH (4‐hydroxybenzoate), C 5 H 4 N (isonicotinate)) carboxylate ligands. DFT studies indicate that the Δ G to form hydrated T ‐ and D ‐shaped forms are not spontaneous but become so with the addition of the carboxylate ligands. Raman spectra of the Np(V) carboxylate solutions contained vibrational modes associated with the D ‐shaped interactions, but spectral changes observed over time indicate a dynamic system. Crystallization experiments from the Np(V) carboxylate systems confirmed the presence of D‐ shaped dimers for the aromatic carboxylates, suggesting that the choice of the anion in solution favors actinyl‐actinyl interactions even at low concentrations (≤20 mM) of Np(V).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Trapping an Unexpected/Unprecedented Hexanuclear Ce(III) Hydrolysis Product with Neutral 4‐Amino‐1,2,4‐triazole

Using Ce(III) as both a representative lanthanide and actinide analog, the ability of mixtures of acidic and basic azoles to allow direct access to homoleptic N-donor f-element complexes in one pot reactions from hydrated salts as starting materials was examined by reacting mixtures of 4-amino-1,2,4-triazole (4-NH 2 -1,2,4-Triaz), 5-amino-tetrazole (5-NH 2 -HTetaz), and 1,2,3-triazole (1,2,3-HTriaz) in 1 : 1 and 1 : 3 ratios with CeCl 3 ⋅ 7H 2 O, [C 2 mim] 3 [CeCl 6 ] ([C 2 mim] + =1-ethyl-2-methylimidazolium), and Ce(NO 3 ) 3 ⋅ 6H 2 O. Although unsuccessful in our goal, structural analysis revealed that neutral 4-NH 2 -1,2,4-Triaz is structure directing via η 2 μ 2 κ 2 bridging, with the formation of the dinuclear complexes [Ce 2 Cl 2 (μ 2 -4-NH 2 -1,2,4-Triaz) 4 (H 2 O) 8 ]Cl 4 ⋅ 4H 2 O, [Ce 2 (μ 2 -4-NH 2 -1,2,4-Triaz) 4 (4-NH 2 -1,2,4-Triaz) 2 (Cl) 6 ], and [4-NH 2 -1,2,4-HTriaz][Ce 2 (μ 2 -4-NH 2 -1,2,4-Triaz) 2 (μ 2 -NO 3 )(NO 3 ) 6 (H 2 O) 2 ]. When the synthetic conditions favored hydrolysis, the hexanuclear Ce(III) complex [Ce 6 (μ 3 -O) 4 (μ 3 -OH) 2 (μ 3 -Cl) 2 (Cl) 6 (μ 2 -4-NH 2 -1,2,4-Triaz) 12 ] ⋅ 7H 2 O was isolated. This unexpected hydrolysis product represents the first example of a high nuclearity lanthanide complex where all Ln atoms are pairwise connected through 12 N-donor ligands or 12 neutral bridging ligands of any type, a rare example of incorporation of non-oxo coordinating anions in the M 6 X 8 core, and the first reported Ce(III) hexanuclear complex of this type.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Membrane‐electrode assembly design parameters for optimal CO 2 reduction

Commercial-scale generation of carbon-containing chemicals and fuels by means of electrochemical CO 2 reduction (CO 2 R) requires electrolyzers operating at high current densities and product selectivities. Membrane-electrode assemblies (MEAs) have been shown to be suitable for this purpose. In such devices, the cathode catalyst layer controls both the rate of CO 2 R and the distribution of products. In this study, we investigate how the ionomer-to-catalyst ratio (I:Cat), catalyst loading, and catalyst-layer thickness influence the performance of a cathode catalyst layer containing Ag nanoparticles supported on carbon. In this paper, we explore how these parameters affect the cell performance and establish the role of the exchange solution (water vs. CsHCO 3 ) behind the anode catalyst layer in cell performance. We show that a high total current density is best achieved using an I:Cat ratio of 3 at a Ag loading of 0.01–0.1 mg Ag /cm 2 and with a 1.0 M solution of CsHCO 3 circulated behind the anode catalyst layer. For these conditions, the optimal CO partial current density depends on the voltage applied to the MEA. The work also reveals that the performance of the cathode catalyst layer is limited by a combination of the electrochemically active surface area and the degree to which mass transfer of CO 2 to the surface of the Ag nanoparticles and the transport of OH – anions away from it limit the overall catalyst activity. Hydration of the ionomer in the cathode catalyst layer is found not to be an issue when using an exchange solution. The insights gained allowed for a Ag CO 2 R MEA that operates between 200 mA/cm 2 and 1 A/cm 2 with CO faradaic efficiencies of 78–91%, and the findings and understanding gained herein should be applicable to a broad range of CO 2 R MEA-based devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗