Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “grade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Low Peripheral Blood Counts and Elevated Proinflammatory Cytokines Signal a Poor CD19 Chimeric Antigen Receptor T-cell Response in Acute Lymphoblastic Leukemia

CD19 chimeric antigen receptor T-cell (CAR-T) therapy has significantly improved outcomes for patients with relapsed/refractory B-cell acute lymphoblastic leukemia (R/R B-ALL). However, approximately 20% of patients fail to achieve a complete remission (CR), and some develop severe, life-threatening toxicities. Understanding the biological mechanisms underlying both dysfunctional responses and severe toxicity is essential for optimizing patient management and improving therapeutic efficacy. This study aimed to (1) characterize cytokine profiles associated with dysfunctional responses and severe toxicity following CAR-T infusion, (2) examine the timing and trajectory of cytokine changes in relation to treatment outcomes, and evaluate potential strategies for mitigating toxicity and treatment failure. We conducted a comprehensive analysis of serum cytokine profiles in 86 adult and pediatric patients undergoing autologous CD19 CAR-T therapy for B-ALL. Patients were categorized into three groups: (1) Dysfunctional response—Patients who failed to achieve a minimal residual disease-negative CR (MRD-CR) by Day 63 or who experienced recurrence of CD19+ disease in the setting ongoing CAR-T cell detection before Day 63. (2) Functional response with severe cytokine release syndrome (CRS) and/or neurotoxicity (NTX)—Patients with best response of MRD-CR by Day 63 who experienced grade 3 or higher CRS or NTX. (3) Functional response without severe CRS or NTX—Patients with best response of MRD-CR by Day 63 who did not experience grade =3 CRS or NTX. Cytokine levels were measured during the first-week postinfusion and correlated with treatment efficacy, toxicity outcomes, complete blood counts, and CAR-T expansion dynamics. This analysis aimed to better understand how cytokine profiles relate to patient outcomes and immune responses in CAR-T therapy. Patients with dysfunctional response exhibited decreased neutrophils, platelets, and levels of granulocytic cytokines (suggestive of low bone marrow reserve) alongside elevated pro-inflammatory cytokines by Day 1. Functional response with severe toxicity patients showed a progressive rise in proinflammatory cytokines, reaching similar levels to dysfunctional response patients by Day 7. We observed that high cytokines at both the Day 1 and Day 7 time points were associated with poor survival. These findings remained significant when adjusting for high disease burden, a known predictor of severe inflammatory toxicity and lack of response. Early post-CAR-T infusion inflammation is associated with both dysfunctional response and severe toxicity—even after adjusting for disease burden. This suggests that inflammation, in addition to disease burden, plays a role in determining patient outcome. Therefore, strategies aimed at reducing the pro-inflammatory state prior to or early after CAR-T cell infusion may improve outcomes for R/R B-ALL patients.

Serum cytokines↗
DOE OSTI2026

Chemical beneficiation of cobaltiferous pyrite: a thermodynamic and parametric study

Despite ongoing efforts to identify substitute materials, cobalt remains indispensable for the production of rechargeable batteries essential to the global energy transition. Currently, most cobalt is sourced as a by-product of nickel and copper extraction from politically and ethically unstable regions. To address this vulnerability, certain primary cobalt deposits—where cobalt occurs within the crystal lattice of pyrite (FeS 2 )—have been identified as potential alternatives. Nonetheless, conventional beneficiation methods have proven largely ineffective for the potential processing of these minerals. This study investigated the thermal decomposition of cobaltiferous pyrite contained in flotation concentrates as a subsequent chemical beneficiation stage aimed at (i) selectively removing sulfur to further increase cobalt grades and (ii) producing a ferromagnetic product suitable for downstream magnetic separation. A thermodynamic analysis was first conducted to evaluate the feasibility of the decomposition reactions and the temperature-dependent evolution of sulfur species. A parametric experimental study then assessed the influence of temperature, residence time, and gas flow rate under N 2 and CO 2 atmospheres. Under the most favorable experimental conditions tested (650 °C, 15 min), cobalt grades increased by up to 15% with negligible cobalt losses and the co-production of high-purity sulfur (>95%). Magnetic separation of the resulting calcine yielded a final concentrate containing 2.09% cobalt at 82.5% recovery, representing a 16–74% improvement over previous baseline studies on similar feedstocks.

Beneficiation↗
DOE OSTI2020

Linking constituent phase properties to ductility and edge stretchability of two DP 980 steels

Two DP 980 steels were characterized with multiple methods to determine its microstructure characteristics, tensile properties and edge stretchability. The first (DP980-B) is a commercial grade DP980 steel produced by AK Steel, while the second (DP980-T) is a modification of the first one by a tempering process. Both contain two individual phases: ferrite and martensite with body centered cubic (BCC) and tetragonal (BCT) crystal structure respectively. ASTM standard tensile tests were performed for both materials, revealing that DP980-B has higher work hardening and larger total elongation than DP980-T. Standard hole piercing and subsequent hole expansion and extrusion tests were also performed. The critical hole expansion ratio (HER) of hole pierced sheet at different nominal clearances, on the other hand, show an opposite trend: the HER of DP980-T almost doubles that of DP980-B. This indicates the tensile ductility and edge stretchability are determined by different mechanisms due to different deformation modes. The ductility of sheet metal during uniaxial tension is determined by deformation instability, i.e. necking, due to less constraint at the region of deformation and fracture will occur quickly after necking. The contribution of post-necking deformation to the total elongation is insignificant for the high strength grades such as DP980 steels. The ductility during hole-expansion, however, is mainly determined by material fracture behavior that is dependent on phase property disparity and material intrinsic fracture parameters. With the individual phase properties for both DP steels determined by in situ tensile tests under high energy X-ray diffraction, the results show that DP980-T steel has lower property disparities between the two phases than DP980-B steel, due to the tempering process. This explains why the DP980-T steel has higher HER than DP980-B steel: lower phase disparity will lead to less local deformation during loading. The higher work hardening rate for DP980-B steel contributes to its higher uniform elongation compared with DP980-T steel based on the maximum load condition of deformation instability. An integrated finite element simulation framework for studying hole expansion is also presented here, based on the calculated individual phase properties from the combined high energy x-ray diffraction (HEXRD) and elastic plastic self-consistent modeling. The simulation results correlate well with the experimental results on the HER difference between the two materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Influence of microstructure and temperature on impact toughness of H13 steel produced by binder jet additive manufacturing

Binder Jet Additive Manufacturing (BJAM) is a promising manufacturing pathway to produce H13 steel dies and tooling with complex geometries for applications in high pressure aluminum die casting, hot stamping, and injection molding. While fully dense H13 coupons produced using BJAM have been subjected to detailed microstructure characterization, properties which are critical and relevant to the aforementioned applications, such as impact toughness, have not been reported. Here, this work evaluated the influence of microstructural characteristics and test temperature on the impact toughness of H13 produced by BJAM. Coupons were produced from three different powder size distributions (PSDs), with nominal powder size ranges of −22 μm, 10-32 μm, and 15-53 μm. Coupons were printed, sintered, hot isostatically pressed (HIPed), and heat treated by quenching and tempering. After HIPing, the measured porosities of the different PSDs were all less than 0.015 vol%. The −22 μm PSD BJAM material exhibited the best impact toughness of all three PSDs across the entire test temperature range from 25 to 400 °C, and also exhibited an ambient temperature impact toughness of 10.9 J at a hardness of 46 HRC, equivalent to minimum threshold requirements for premium grade H13. However, all three BJAM PSDs exhibited moderately lower impact toughness than premium grade wrought H13 from RT to 400 °C. We attribute this in part due to the very large prior-austenite grain (PAG) sizes near 400 μm and segregation from former liquid channels leading to greater amounts of carbide precipitation on PAG boundaries. Technical pathways for optimizing processing and chemistry of BJAM H13 to further improve impact toughness are discussed.

Binder jet additive manufacturing↗
DOE OSTI2020

Over 11% Efficient Eco-Friendly Kesterite Solar Cell: Effects of S-Enriched Surface of Cu2ZnSn(S,Se)4 Absorber and Band Gap Controlled (Zn,Sn)O Buffer

For high efficiency kesterite Cu2ZnSn(S,Se)4 (CZTSSe) solar cell, CdS thin film was usually used as a buffer layer. However, due to the toxicity of Cd and pollution problems involved from the solution-based chemical bath deposition, eco-friendly high efficiency CZTSSe solar cell with Cd-free buffer is necessary. As an Cd-free buffer layer, we investigated (Zn,Sn)O (ZTO) film deposited by sputtering method. In order to achieve high power conversion efficiency, we controlled energy band gaps of CZTSSe absorber as well as ZTO buffer, which was required to optimize conduction band offset (CBO) between the absorber and the buffer and to increase open circuit voltage (Voc) and fill factor (FF). The CBO was optimized by controlling the band gap of ZTO. By varying the Sn/(Zn + Sn) ratio and its deposition temperature, band gap of ZTO was successfully adjusted. Experimental and computational calculation results showed that solar cell performance was strongly affected by the CBO between absorber and buffer. Besides CBO matching, larger band gap of ZTO improved short circuit current density (Jsc) with enhanced external quantum efficiency value in blue photon spectrum range. As an additional way to improve power conversion efficiency of solar cell, band graded CZTSSe absorber was developed by using spray-based two-step process. The sprayed CZTSSe film was engineered to have S-enriched surface, which makes surface band gap widened and surface passivated, and resultantly increases Voc, Jsc and fill factor (FF). By controlling band gaps of both CZTSSe absorber and ZTO buffer, we obtained 11.22% environment-friendly CZTSSe solar cell without MgF2 anti-reflection coating.

(Zn↗
DOE OSTI2020

An improved detailed chemical kinetic model for C3-C4 linear and iso-alcohols and their blends with gasoline at engine-relevant conditions

Propanol and butanol isomers have received significant research attention as promising fuel additives or neat biofuels. Robust chemical kinetic models are needed that can provide accurate and efficient predictions of combustion performance across a wide range of engine relevant conditions. Herein, this study seeks to improve the understanding of ignition and combustion behavior of pure C3-C4 linear and iso-alcohols, and their blends with gasoline at engine-relevant conditions. In this work, a kinetic model with improved thermochemistry and reaction kinetics was developed based on recent theoretical calculations of H-atom abstraction and peroxy radical reaction rates. Kinetic model validations are reported, and the current model reproduces the ignition delay times of the C3 and C4 alcohols well. Variations in reactivity over a wide range of temperatures and other operating conditions are also well predicted by the current model. Recent ignition delay time measurements from a rapid compression machine of neat iso-propanol and iso-butanol [Cheng et al., Proc. Combust Inst. (2020)] and blends with a research grade gasoline [Goldsborough et al., Proc. Combust Inst. (2020)] at elevated pressure (20–40 bar) and intermediate temperatures (780–950 K) were used to demonstrate the accuracy of the current kinetic model at conditions relevant to boosted spark-ignition engines. The effects of alcohol blending with gasoline on the autoignition behavior are discussed. The current model captures the suppression of reactivity in the low-temperature and negative-temperature-coefficient (NTC) region when either isopropanol and isobutanol are added to a research grade gasoline. Sensitivity and reaction flux analysis were performed to provide insights into the relevant fuel chemistry of the C3-C4 alcohols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Process design for recovering rare-earth elements from mine tailings with low rare-earth concentrations via sequential leaching and solvent extraction

Rare earth elements (REEs) are essential for advanced technologies and yet face significant supply chain risks due to their concentrated global production and limited domestic availability. Addressing this challenge requires efficient processes capable of upgrading low-grade secondary resources such as mine tailings. In this study, we developed a novel separation flowsheet that integrates sequential leaching and 2-stage solvent extraction (SX) processes to recover high-purity heavy REEs (HREEs) and light REEs (LREEs) from a simulated mine-tailing concentrate containing 2.4 wt% total REEs (TREEs; 0.6 wt% LREEs and 1.8 wt% HREEs). Sequential leaching with controlled pH adjustment selectively precipitated REEs while retaining the large amount of impurities in the solution, producing an REE-enriched leachate by following leaching processes with roughly twice the REE concentration and half the impurity concentration compared to that of single-step leaching. The optimized SX flowsheet employed Cyanex 572 to extract HREEs and Fe over LREEs, followed by Fe removal using tributyl phosphate (TBP), while the raffinate stream was processed by SX with di(2-ethylhexyl)phosphoric acid (D2EHPA) to recover LREEs under optimized conditions balancing both extraction efficiency and purity. Although increased extractant availability in the organic phase improved LREE recovery, it also increased co-extraction of Ca, underscoring trade-offs in process optimization. Both HREE- and LREE-rich solutions were subsequently precipitated into solid products via oxalate precipitation, resulting in high-purity REE solids containing ∼92.0 wt% HREEs (∼95.7 wt% TREEs) and ∼92.8 wt% LREEs (∼94.0 wt% TREEs). In conclusion, this proof-of-concept study using simulated mine tailings demonstrates a promising approach for upgrading low-grade REE resources, while highlighting the need for future validation with real materials.

Mine tailings↗
DOE OSTI2021

Hybrid electric buses fuel consumption prediction based on real-world driving data

Estimating fuel consumption by hybrid diesel buses is challenging due to its diversified operations and driving cycles. Here, long-term transit bus monitoring data were utilized to empirically compare fuel consumption of diesel and hybrid buses under various driving conditions. Artificial neural network (ANN) based high-fidelity microscopic (1 Hz) and mesoscopic (5–60 min) fuel consumption models were developed for hybrid buses. The microscopic model contained 1 Hz driving, grade, and environment variables. The mesoscopic model aggregated 1 Hz data into 5 to 60-minute traffic pattern factors and predicted average fuel consumption over its duration. The prediction results show mean absolute percentage errors of 1–2% for microscopic models and 5–8% for mesoscopic models. The data were partitioned by different driving speeds, vehicle engine demand, and road grade to investigate their impacts on prediction performance.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Investigation of Off-Stoichiometry in Ternary Nitrides by EDS and HRTEM

We demonstrate an inverted metamorphic multijunction (IMM) photovoltaic cell comprising lattice-mismatched 1.2 eV AlGaInAs and 1.0 eV GaInAs junctions optimized for high-temperature thermophotovoltaic (TPV) applications. This device differs from traditional IMM solar cells because the mismatched junctions are grown at a single lattice constant. This architecture enables removal of the compositionally graded buffer which otherwise filters light from the junctions below and absorbs sub-bandgap light via free-carrier absorption. Sub-bandgap absorption dramatically reduces the efficiency of TPV systems using high reflectivity cells to enable bandedge spectrum filtering. Three components required development to enable this device: 1) a lattice-mismatched 1.2 eV AlGaInAs junction, 2) a metamorphic contact layer grown after the graded buffer, and 3) a transparent tunnel junction that sits in front of the 1.0 eV GaInAs junction. Growth conditions that minimize oxygen defect incorporation maximize AlGaInAs cell quality, enabling a 0.41 V bandgap open circuit voltage offset at 22 mA/cm2 under AM1.5D. A mismatched GaInAs:Se layer is developed as a low resistance contact. Lastly we develop a GaAsSb:C/GaInP:Se tunnel junction suitable for high-power densities with more transparency than the GaAsSb:C/GaInP:Se structure used in past IMM cells. We characterize the tandem device under a high-intensity spectrum that approximates the emission from a 2150 °C blackbody radiator and deduce a projected ideal TPV efficiency of 39.9% at ~30% of the blackbody irradiance, and 36% ideal TPV efficiency under the full 118 W/cm2 irradiance. Improvements to the back-surface reflectivity and series resistance are expected to increase the ideal TPV efficiency well above 40%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Corrosion of Ferrous Structural Alloys in Biomass Derived Fuels and Organic Acids

This work investigated the corrosivity of biomass-derived liquid fuels and organic acids associated with bio-oils and conducted a corrosion compatibility evaluation of several structural ferrous alloys in the fuels and acids. Here, the acidity parameters and solution conductivity values were higher in raw pyrolysis bio-oils than postprocessed oils with significant corrosion attack for carbon steel and Fe-2.25Cr-1Mo. However, higher-grade stainless steels, ferritic Fe-15Cr (15Cb) and austenitic types 304L and 316L, showed negligible corrosion loss, whereas lower-Cr ferritic grades 409, 410, and 416 were attacked. Metal leaching tests and electrochemical impedance spectroscopy measurements revealed superior corrosion resistance of 316 over 410 stainless steels in solutions of formic and oxalic acids that can be present in bio-oils. The corrosion evaluation methods utilized in this work provide effective screening tools to identify the compatible structural alloys for bio-oils.

09 BIOMASS FUELS↗
DOE OSTI2025

Dithionite Inhibits Iron(III) (Hydr)oxide Formation during Olivine Dissolution Advancing Simultaneous CO 2 Mineralization and Nickel Recovery

Increasing CO 2 concentration poses significant global challenges, impacting both environmental and human health. As we strive for a carbon-neutral energy technology transition, the demand for critical elements (e.g., nickel and cobalt) continues to increase, while high-grade ores are depleting. Combining CO 2 mineralization with the recovery of critical elements from low-grade ores offers an innovative solution. Olivine, a magnesium-rich ultramafic with trace amounts of critical elements, is a promising mineral; however, its impurities, such as iron (Fe(III)), hinder the dissolution of Ni and Mg from olivine, reducing its carbonation and critical element recovery. Here, to address this challenge, this study examined Ni dissolution from San Carlos olivine at high temperatures and high CO 2 pressure. We found that iron(III) (hydr)oxide layers impeded olivine dissolution; however, with sodium dithionite (Na 2 S 2 O 4 ), a reducing agent, olivine dissolution is significantly improved by preventing iron(III) (hydr)oxide formation. With Na 2 S 2 O 4 , within 24 h, Mg and Ni dissolution from olivine increased 2.85-fold and 2.66-fold, respectively, compared to samples without Na 2 S 2 O 4 . After seven cycles, with solutions replaced every 24 h, 98.9% of the total Mg and 84.6% of the total Ni were recovered. This approach enhances olivine’s CO 2 mineralization and improves the sustainability of critical element supply.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Preparation and Characterization of Various Kraft Lignins and Impact on Their Pyrolysis Behaviors

Lignin-derived chemicals and fuel products have received much attention in the context of bio-refinery. In this study we prepared and characterized various lignin samples from black liquor (BL), a major byproduct from the pulp and paper manufacturing processes, and studied the pyrolysis behaviors of these isolated lignin samples at 600 °C under a N2 atmosphere. Three lignin samples were isolated from the Kraft pulping BL of Loblolly pine linerboard grade process (KL, obtained by direct evaporation; L10, obtained by precipitation at pH 10; L3, obtained by precipitation at pH 3), while another three were from the Kraft pulping BL of Loblolly pine bleach grade process (KB, B10, B3). The inorganic elements present in lignin samples were analyzed using an inductively coupled plasma (ICP) analyzer. The KL and KB samples contained a larger amount of inorganic elements, especially Na and S, than did the other lignin samples. Owing to large quantities of inorganic elements, the ash contents in KL and KB were higher than in the precipitated lignin samples (L10, B10, L3, and B3). These inorganic elements have a significant effect on the subsequent pyrolysis process, as a result, more extensive depolymerization of lignin occurred in KL and KB samples, leading to the formation of fewer pyrolysis oils, with lower molecular weights. NMR analyses of pyrolysis oils show that more methoxyl groups and ether bonds were cleaved, resulting in fewer methoxyl groups and aromatic C–O bonds for the KL and KB heavy oil than for the precipitated lignin heavy oil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Toward a Diverse Next-Generation Energy Workforce: Teaching Artificial Photosynthesis and Electrochemistry in Elementary Schools through Active Learning

Artificial photosynthesis is a promising approach to generate commodity chemicals using abundant chemical feedstocks and renewable energy sources. Despite its importance, affordable and effective hands-on classroom activities that demonstrate artificial photosynthesis and teach key concepts, especially for primary school students, are lacking. Educating young students on this topic is a critical step in the development of the next-generation energy workforce, especially one that is diverse in race and gender. Here, we hypothesize that an effective approach to educate a broad range of young students on the topic of artificial photosynthesis is through the use of an active learning-based lesson plan that employs cheap and accessible materials. This hypothesis is confirmed by evaluating the understanding of fifth grade students with a survey before and after a lesson plan on artificial photosynthesis that uses active-learning techniques and uses safe and highly accessible materials (baking soda, tap water, plastic jars, Ni coil, alligator clips, and a solar cell) to perform solar-powered water splitting. The lesson plan and survey questions are designed to align with the educational outcomes for fifth grade classrooms in California and to address four general learning objectives: (1) Motivations of Artificial Photosynthesis, (2) Applications of Artificial Photosynthesis, (3) Inputs and Outputs of Artificial Photosynthesis, and (4) Engineering Design for Artificial Photosynthesis. The survey data demonstrate a statistically significant improvement in overall student understanding from the lesson plan. Importantly, the data show that the lesson plan presented here is effective at narrowing the performance gap between minority students and overly represented groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Polymer, Additives, and Processing Effects on N95 Filter Performance

The current severe acute respiratory syndrome coronavirus 2 (SARS-COV-2) pandemic has highlighted the need for personal protective equipment, specifically filtering facepiece respirators like N95 masks. While it is common knowledge that polypropylene (PP) is the industry standard material for filtration media, trial and error is often required to identify suitable commercial precursors for filtration media production. This work aims to identify differences between several commercial grades of PP and demonstrate the development of N95 filtration media with the intent that the industry partners can pivot and help address N95 shortages. Three commercial grades of high melt flow index PP were melt blown at Oak Ridge National Laboratory and broadly characterized by several methods including differential scanning calorimetry (DSC), X-ray diffraction (XRD), and neutron scattering. Despite the apparent similarities (high melt flow and isotacticity) between PP feedstocks, the application of corona charging and charge enhancing additives improve each material to widely varying degrees. From the analysis performed here, the most differentiating factor appears to be related to crystallization of the polymer and the resulting electret formation. Materials with higher crystallization onset temperatures, slower crystallization rates, and larger number of crystallites form a stronger electret and are more effective at filtration.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Decontamination of SARS-CoV-2 and Other RNA Viruses from N95 Level Meltblown Polypropylene Fabric Using Heat under Different Humidities

In March of 2020, the World Health Organization declared a pandemic of coronavirus disease 2019 (COVID-19), caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The pandemic led to a shortage of N95-grade filtering facepiece respirators (FFRs), especially surgical-grade N95 FFRs for protection of healthcare professionals against airborne transmission of SARS-CoV-2. We and others have previously reported promising decontamination methods that may be applied to the recycling and reuse of FFRs. In this study we tested disinfection of three viruses, including SARS-CoV-2, dried on a piece of meltblown fabric, the principal component responsible for filtering of fine particles in N95-level FFRs, under a range of temperatures (60–95 °C) at ambient or 100% relative humidity (RH) in conjunction with filtration efficiency testing. We found that heat treatments of 75 °C for 30 min or 85 °C for 20 min at 100% RH resulted in efficient decontamination from the fabric of SARS-CoV-2, human coronavirus NL63 (HCoV-NL63), and another enveloped RNA virus, chikungunya virus vaccine strain 181/25 (CHIKV-181/25), without lowering the meltblown fabric’s filtration efficiency.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Porous but Mechanically Robust All-Inorganic Antireflective Coatings Synthesized using Polymers of Intrinsic Microporosity

Herein, we introduce polymer of intrinsic microporosity 1 (PIM-1) to design single-layer and multilayered all-inorganic antireflective coatings (ARCs) with excellent mechanical properties. Using PIM-1 as a template in sequential infiltration synthesis (SIS), we can fabricate highly uniform, mechanically stable conformal coatings of AlO x with porosities of ~50% and a refractive index of 1.41 compared to 1.76 for nonporous AlO x that is perfectly suited for substrates commonly used in high-end optical systems or touch screens (e.g., sapphire, conductive glass, bendable glass, etc.). We show that such films can be used as a single-layer ARC capable of reduction of the Fresnel reflections of sapphire to as low as 0.1% at 500 nm being deposited only on one side of the substrate. We also demonstrate that deposition of the second layer with higher porosity using block copolymers enables the design of graded-index double-layered coatings. AlO x structures with just two layers and a total thickness of less than 200 nm are capable of reduction of Fresnel reflections under normal illumination to below 0.5% in a broad spectral range with 0.1% reflection at 700 nm. Additionally, and most importantly, we show that highly porous single-layer and graded-index double-layered ARCs are characterized by high hardness and scratch resistivity. The hardness and the maximum reached load were 7.5 GPa and 13 mN with a scratch depth of about 130 nm, respectively, that is very promising for the structures consisting of two porous AlO x layers with 50% and 85% porosities, correspondingly. Such mechanical properties of coatings can also allow their application as protective layers for other optical coatings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Linear complexions enable unprecedented ductility retention in neutron irradiated ferritic steel

Herein, the operando formation of Si-enriched linear complexions during neutron irradiation enables Grade 91 ferritic steel to overcome the strength–ductility tradeoff, one of the most critical life-limiting challenges facing nuclear structural alloys. Linear complexions are a distinct yet confined chemical and structural state at a dislocation, which are rarely reported in engineering alloys. Ferritic steels are amongst the most ubiquitous engineering alloys for current and future nuclear components, but they are susceptible to irradiation hardening and embrittlement. Here, exceptional ductility retention exceeding 90% of pre-irradiation levels is obtained in Grade 91 synthesized using powder metallurgy with hot isostatic pressing (PM-HIP). Powder processing artifacts promote a high density of screw dislocation arrays, on which β-FeSi 2 linear complexions form due to Si segregation during irradiation. Screw dislocation dipoles undergo pinning and unpinning on linear complexions, resulting in extended yielding and significant ductility retention post-irradiation. These findings represent a significant advancement toward design of alloys and manufacturing processes that can autonomously self-regulate their microstructural resilience in-operando during irradiation, enabling exceptional ductility rather than embrittlement.

Chatterjee, Arya [University of Illinois, Urbana, ↗
DOE OSTI2023

High-throughput printing of combinatorial materials from aerosols

The development of new materials and their compositional and microstructural optimization are essential in regard to next-generation technologies such as clean energy and environmental sustainability. However, materials discovery and optimization have been a frustratingly slow process. The Edisonian trial-and-error process is time consuming and resource inefficient, particularly when contrasted with vast materials design spaces 1 . Whereas traditional combinatorial deposition methods can generate material libraries 2,3 , these suffer from limited material options and inability to leverage major breakthroughs in nanomaterial synthesis. Here we report a high-throughput combinatorial printing method capable of fabricating materials with compositional gradients at microscale spatial resolution. In situ mixing and printing in the aerosol phase allows instantaneous tuning of the mixing ratio of a broad range of materials on the fly, which is an important feature unobtainable in conventional multimaterials printing using feedstocks in liquid–liquid or solid–solid phases 4–6 . We demonstrate a variety of high-throughput printing strategies and applications in combinatorial doping, functional grading and chemical reaction, enabling materials exploration of doped chalcogenides and compositionally graded materials with gradient properties. The ability to combine the top-down design freedom of additive manufacturing with bottom-up control over local material compositions promises the development of compositionally complex materials inaccessible via conventional manufacturing approaches.

36 MATERIALS SCIENCE↗