Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Arbitrary aircraft-geometry generator

Computer program helps designers to generate detailed configuration geometry with much flexibility in choices of configurations and details of description. Input requirements, program turnaround time, and costs are kept low. It consists of routines that generate fuselage and planar-surface (winglike) geometries and routine that determines true intersection of all components with fuselage.

Edwards, C. L. W.↗

Design study and performance analysis of a high-speed multistage variable-geometry fan for a variable cycle engine

A design technology study was performed to identify a high speed, multistage, variable geometry fan configuration capable of achieving wide flow modulation with near optimum efficiency at the important operating condition. A parametric screening study of the front and rear block fans was conducted in which the influence of major fan design features on weight and efficiency was determined. Key design parameters were varied systematically to determine the fan configuration most suited for a double bypass, variable cycle engine. Two and three stage fans were considered for the front block. A single stage, core driven fan was studied for the rear block. Variable geometry concepts were evaluated to provide near optimum off design performance. A detailed aerodynamic design and a preliminary mechanical design were carried out for the selected fan configuration. Performance predictions were made for the front and rear block fans.

Sullivan, T. J.↗

Effect of geometry on hydrodynamic film thickness

The influence of geometry on the isothermal hydrodynamic film separating two rigid solids was investigated. Pressure-viscosity effects were not considered. The minimum film thickness is derived for fully flooded conjunctions by using the Reynolds boundary conditions. It was found that the minimum film thickness had the same speed, viscosity, and load dependence as Kapitza's classical solution. However, the incorporation of Reynolds boundary conditions resulted in an additional geometry effect. Solutions using the parabolic film approximation are compared with those using the exact expression for the film in the analysis. Contour plots are shown that indicate in detail the pressure developed between the solids.

Brewe, D. E.↗

The geometry of the 37-tile microwave antenna support structure

The geometry of the support structure for a proposed parabolic shaped microwave antenna is examined. The surface of the antenna is comprised of 37 hexagonal shaped tiles, each connected to a truss module. The units are joined together to form a rigidized, faceted, concave parabolic surface. The geometry specifications are described through an explanation of the structural components which make up the antenna, a description of the coordinate system devised to identify the structure, and a presentation of the nondimensional results.

Finley, L. A.↗

A numerical technique for calculation of the noise of high-speed propellers with advanced blade geometry

A numerical technique and computer program were developed for the prediction of the noise of propellers with advanced geometry. The blade upper and lower surfaces are described by a curvilinear coordinate system, which was also used to divide the blade surfaces into panels. Two different acoustic formulations in the time domain were used to improve the speed and efficiency of the noise calculations: an acoustic formualtion with the Doppler factor singularity for panels moving at subsonic speeds and the collapsing sphere formulation for panels moving at transonic or supersonic speeds. This second formulation involves a sphere which is centered at the observer position and whose radius decreases at the speed of sound. The acoustic equation consisted of integrals over the curve of intersection for both the sphere and the panels on the blade. Algorithms used in some parts of the computer program are discussed. Comparisons with measured acoustic data for two model high speed propellers with advanced geometry are also presented.

Nystrom, P. A.↗

Spectral methods for problems in complex geometries

The properties of spectral methods are surveyed and their extension to solve problems in complex geometries is developed. A new iteration procedure is introduced to solve efficiently the full matrix equations resulting from spectral approximations to nonconstant coefficient boundary-value problems in complex geometries. It is shown that the work required to solve these spectral equations exceeds that of solving the lowest-order finite-difference approximation to the same problem by only O(N log N).

Orszag, S. A.↗

Effect of zone size on the convergence of exact solutions for diffusion in single phase systems with planar, cylindrical or spherical geometry

Exact solutions for diffusion in single phase binary alloy systems with constant diffusion coefficient and zero-flux boundary condition have been evaluated to establish the optimum zone size of applicability. Planar, cylindrical and spherical interface geometry, and finite, singly infinite, and doubly infinite systems are treated. Two solutions are presented for each geometry, one well suited to short diffusion times, and one to long times. The effect of zone-size on the convergence of these solutions is discussed. A generalized form of the diffusion solution for doubly infinite systems is proposed.

Unnam, J.↗

Wind-tunnel investigation of the effects of blade tip geometry on the interaction of torsional loads and performance for an articulated helicopter rotor

The Langley transonic dynamics tunnel was used to determine the degree of correlation between rotor performance and the dynamic twist generated by changes in blade tip geometry using an articulated rotor with four different tip geometries at advance ratios of 0.20, 0.30 and 0.35. Based on the data obtained, it is concluded that: (1) there appears to be no strong correlation between blade torsion loads and rotor performance prediction; (2) for a given rotor task at each advance ratio investigated, both the azimuthal variation of torsional moment and the mean torsional moment at 81% radius are configuration dependent; (3) reducing the nose down twist on the advancing blade appears to be more important to forward flight performance than increasing the nose down twist on the retreating blade; (4) the rotor inflow model used was important in predicting the performance of the adaptive rotor; and (5) neither rigid blade solidity effects, inflow environment, nor blade torsion loads can be used alone to accurately predict active rotor performance.

Yeager, W. T.↗

Subsonic panel method for the efficient analysis of multiple geometry perturbations

An accurate and efficient method was developed for the aerodynamic analysis of a series of arbitrary small geometry perturbations to a given baseline configuration. The method is appropriate for wing-fuselage configurations in incompressible potential flow. Mathematical formulations are presented for three computer programs that are employed. The first program is a conventional surface panel method for calculating the baseline singularity distribution. The second program calculates a partial derivative matrix. Each element of the matrix is the rate of change of singularity strength at one point with respect to a surface coordinate of a different point. For each baseline configuration, the calculated quantities from the first two programs establish an input file for the third. The third program calculates the surface pressure distribution and forces and moments for a series of geometry perturbations.

Bristow, D. R.↗

Surface geometry of circular cut spiral bevel gears

An analysis of the surface geometry of spiral bevel gears formed by a circular cutter is presented. The emphasis is upon determining the tooth surface principal radii of curvature of crown (flat) gears. Specific results are presented for involute, straight, and hyperbolic cutter profiles. It is shown that the geometry of circular cut spiral bevel gears is somewhat simpler than a theoretical logarithmic spiral bevel gear.

Huston, R. L.↗

The effects of scattering geometry on the spectrophotometric properties of powdered material

The characteristics of reflectance spectra are being used as a basis in investigations to infer the composition of planetary surfaces. However, the reflectance spectra of powdered materials depend not only on the composition of these materials, but also on other variables. A description is presented of the results of an exploratory series of measurements designed to investigate the importance of scattering geometry as a variable in determining the shapes of spectral reflectance curves, taking into account half a dozen materials of planetary interest. It is noted that the considered results are consistent with those reported by Adams and Felice (1967), especially the results on the variation with phase angle of the Red/Blue color ratio for various silicate materials. The measurements demonstrate in detail that scattering geometry does affect the shapes of spectral reflectance curve. In some cases this effect is quite significant.

Gradie, J.↗

Lava flooding of ancient planetary crusts - Geometry, thickness, and volumes of flooded lunar impact basins

The present study is concerned with the determination of the geometry, thickness, volumes, and style of emplacement of lava extruded onto an ancient planetary crust, giving particular attention to crustal regions characterized by the topography of impact basins. Attempts to establish thicknesses and volumes are based on four approaches, related to crater morphometry, crater penetration, stratigraphy, and geophysical techniques. The considered technique is applied to two areas related to lunar impact areas. The Orientale basin is investigated, taking into account the style of flooding, the geometry of deposits and implications for loading of the lithosphere, and aspects of lava thickness and vertical mixing. An analysis of the Archimedes-Apennine Bench region is also conducted, giving attention to the number of data points, rim heights of fresh lunar craters, and the premare nature of impact crater data points.

Head, J. W.↗

Subsonic 3-D surface panel method for rapid analysis of multiple geometry perturbations

For any baseline aircraft configuration, a matrix of partial derivatives of surface velocity potential with respect to geometry coordinates is calculated. Linear extrapolation is then used to analyze the subcritical potential flow corresponding to a series of arbitrary small geometry perturbations. Each perturbation analysis is more than an order of magnitude more efficient than a conventional panel method solution because no influence coefficients are calculated and no large system of linear algebraic equations is solved. Wing and wing-fuselage examples are presented to demonstrate that the predicted pressure distributions are nearly exact for large changes to wing camber, thickness, and leading edge radius.

Bristow, D. R.↗

Landsat D Thematic Mapper image resampling for scan geometry correction

The Landsat D system is described, and the geometric correction processing for the Thematic Mapper (TM) is reviewed. The resampling procedure (the generation of a TM output image) is analyzed with emphasis on the effect of sampling geometry on output image. Effects of scan gaps and spacecraft jitter on output image are studied by means of a simulation of the sampling and resampling processes for three sampling geometries. Visual inspection of the resampling results shows that the resampling algorithm works excellently under all conditions and that distortion is visible only in the rare case of large gaps between scans.

Prakash, A.↗

Thermomechanical loading of multilayered cylindrical geometries in thermal cycling from 300 to 1300 K

The principal of multiple material layering is well known as an effective method of reducing heat transfer; however, thermal gradients can impose significant loads and lead to delamination and subsequent component failure. An analysis is developed and experimental data are discussed for the thermomechanical effects of multilayered materials on a heat sink substrate of cylindrical geometry subject to thermal cycling. The geometry is heated in cross-flow by a high-velocity flame and cooled in crossflow by ambient-temperature air from a critical flow orifice. Each layer of material possesses a threshold beyond which small changes in temperature or mechanical loading greatly influence the life in thermal cycling of the layered materials. Comparisons are made between the thermomechanical loads predicted by various numerical codes for the linear case and by a simplified analytic model.

Hendricks, R. C.↗

Relations between mirror flats geometry and X-ray data

The X-ray data is used to determine the position where the mirror flats are properly aligned. The zero angle of incidence position of the mirrors is determined with the data. The mirrors are in the periscope geometry. However, the value of S sub T, the distance from the slit to the plane of the short mirror, is not fixed nor known a priori. This parameter plays a very important role in the zero position of the mirrors. As a further complicating factor, it is possible that the mirrors are not parallel. That is, they may be cocked by some angles alpha and beta, respectively. The relation between the X-ray data and the geometry of the mirrors is given. The experimental errors are given in terms of known or measured parameters.

Williams, A. C.↗

Vibration characteristics of a deployable controllable-geometry truss boom

An analytical study was made to evaluate changes in the fundamental frequency of a two dimensional cantilevered truss boom at various stages of deployment. The truss could be axially deployed or retracted and undergo a variety of controlled geometry changes by shortening or lengthening the telescoping diagonal members in each bay. Both untapered and tapered versions of the truss boom were modeled and analyzed by using the finite element method. Large reductions in fundamental frequency occurred for both the untapered and tapered trusses when they were uniformly retracted or maneuvered laterally from their fully deployed position. These frequency reductions can be minimized, however, if truss geometries are selected which maintain cantilever root stiffness during truss maneuvers.

Dorsey, J. T.↗

Evaluation of LANDSAT-4 TM and MSS ground geometry performance without ground control

LANDSAT thematic mapper P-data of Washington, D.C., Harrisburg, PA, and Salton Sea, CA were analyzed to determine magnitudes and causes of error in the geometric conformity of the data to known earth-surface geometry. Several tests of data geometry were performed. Intra-band and inter-band correlation and registration were investigated, exclusive of map-based ground truth. Specifically, the magnitudes and statistical trends of pixel offsets between a single band's mirror scans (due to processing procedures) were computed, and the inter-band integrity of registration was analyzed.

Bryant, N. A.↗