Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Deactivation of Cu-Exchanged Automotive-Emission NH 3 -SCR Catalysts Elucidated with Nanoscale Resolution Using Scanning Transmission X-ray Microscopy

To gain insight into the underlying mechanisms of catalyst durability for the selective catalytic reduction (SCR) of NO x with an ammonia reductant, we employed scanning transmission X-ray microscopy (STXM) to study Cu-exchanged zeolites with the CHA and MFI framework structures before and after simulated 135 000-mile aging. X-ray absorption near-edge structure (XANES) measurements were performed at the Al K- and Cu L-edges. The local environment of framework Al, the oxidation state of Cu, and geometric changes were analyzed, showing a multi-factor-induced catalytic deactivation. In Cu-exchanged MFI, a transformation of Cu II to Cu I and Cu x O y was observed. We also found a spatial correlation between extra-framework Al and deactivated Cu species near the surface of the zeolite as well as a weak positive correlation between the amount of CuI and tri-coordinated Al. By inspecting both Al and Cu in fresh and aged Cu-exchanged zeolites, we conclude that the importance of the preservation of isolated Cu II sites trumps that of Brønsted acid sites for NH 3 -SCR activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Operando NRIXS and XAFS Investigation of Segregation Phenomena in Fe-Cu and Fe-Ag Nanoparticle Catalysts during CO 2 Electroreduction

Operando nuclear resonant inelastic X-ray scattering (NRIXS) and X-ray absorption fine-structure spectroscopy (XAFS) measurements were used to gain insight into the structure and surface composition of FeCu and FeAg nanoparticles (NPs) during the electrochemical CO 2 reduction (CO 2 RR) and to extract correlations with their catalytic activity and selectivity. The formation of a core–shell structure during CO 2 RR for FeAg NPs was inferred from the analysis of the operando NRIXS data (phonon density of states, PDOS) and XAFS measurements. Electrochemical analysis of the FeAg NPs revealed a faradaic selectivity of 36 % for CO in 0.1 M KHCO 3 at -1.1 V vs. RHE, similar to that of pure Ag NPs. In contrast, a predominant selectivity towards H 2 evolution is obtained in the case of the FeCu NPs, analogous to the results obtained for pure Fe NPs, although small Cu NPs have also been shown to favor H 2 production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Enhanced Catalysis under 2D Silica: A CO Oxidation Study

Abstract Interfacially confined microenvironments have recently gained attention in catalysis, as they can be used to modulate reaction chemistry. The emergence of a 2D nanospace at the interface between a 2D material and its support can promote varying kinetic and energetic schemes based on molecular level confinement effects imposed in this reduced volume. We report on the use of a 2D oxide cover, bilayer silica, on catalytically active Pd(111) undergoing the CO oxidation reaction. We “uncover” mechanistic insights about the structure–activity relationship with and without a 2D silica overlayer using in situ IR and X‐ray spectroscopy and mass spectrometry methods. We find that the CO oxidation reaction on Pd(111) benefits from confinement effects imposed on surface adsorbates under 2D silica. This interaction results in a lower and more dispersed coverage of CO adsorbates with restricted CO adsorption geometries, which promote oxygen adsorption and lay the foundation for the formation of a reactive surface oxide that produces higher CO 2 formation rates than Pd alone.

Eads, Calley N.↗
DOE OSTI2021

Structural Changes during the Growth of Atomically Precise Metal Oxido Nanoclusters from Combined Pair Distribution Function and Small-Angle X-ray Scattering Analysis

The combination of in situ pair distribution function (PDF) analysis and small-angle X-ray scattering (SAXS) enables analysis of the formation mechanism of metal oxido nanoclusters and cluster–solvent interactions as they take place. Herein, we demonstrate the method for the formation of clusters with a [Bi 38 O 45 ] core. Upon dissolution of crystalline [Bi 6 O 5 (OH) 3 (NO 3 ) 5 ]∙3 H 2 O in DMSO, an intermediate rapidly forms, which slowly grows to stable [Bi 38 O 45 ] clusters. To identify the intermediate, we developed an automated modeling method, where smaller [Bi x O y ] structures based on the [Bi 38 O 45 ] framework are tested against the data. [Bi 22 O 26 ] was identified as the main intermediate species, illustrating how combined PDF and SAXS analysis is a powerful tool to gain insight into nucleation on an atomic scale. PDF also provides information on the interaction between nanoclusters and solvent, which is shown to depend on the nature of the ligands on the cluster surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Simultaneously Enhanced Hydrophilicity and Stability of a Metal-Organic Framework via Post-Synthetic Modification for Water Vapor Sorption/Desorption

With increasing demands for high-performance water sorption materials, metal-organic frameworks (MOFs) have gained considerable attention due to their high maximum uptake capacities. In many cases, however, high overall capacity is not necessarily accomplishing high working capacity under operating conditions, due to insufficient hydrophilicity and/or water stability. Herein, we present a post-synthetic modification (PSM) of MOF-808, with di-sulfonic acids enhancing simultaneously its hydrophilicity and water stability without sacrificing its uptake capacity of ≈30 mmol g -1 . Further, di-sulfonic acid PSM enabled a shift of the relative humidity (RH) associated with a sharp step in water vapor sorption from 35–40 % RH in MOF-808 to below 25 % RH. While MOF-808 lost uptake capacity and crystallinity over multiple sorption/desorption cycles, the di-sulfonic acid PSM MOF-808 retained >80 % of the original capacity. PSM MOF-808 exhibited good hydrothermal stability up to 60 °C and high swing capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bio-Templated Chiral Zeolitic Imidazolate Framework for Enantioselective Chemoresistive Sensing

Chiral metal–organic frameworks (MOFs) have gained rising attention as ordered nanoporous materials for enantiomer separations, chiral catalysis, and sensing. Among those, chiral MOFs are generally obtained through complex synthetic routes by using a limited choice of reactive chiral organic precursors as the primary linkers or auxiliary ligands. Here, we report a template-controlled synthesis of chiral MOFs from achiral precursors grown on chiral nematic cellulose-derived nanostructured bio-templates. We demonstrate that chiral MOFs, specifically, zeolitic imidazolate framework (ZIF), unc-[Zn(2-MeIm) 2 , 2-MeIm=2-methylimidazole], can be grown from regular precursors within nanoporous organized chiral nematic nanocelluloses via directed assembly on twisted bundles of cellulose nanocrystals. The template-grown chiral ZIF possesses tetragonal crystal structure with chiral space group of P4 1 , which is different from traditional cubic crystal structure of I-43 m for freely grown conventional ZIF-8. The uniaxially compressed dimensions of the unit cell of templated ZIF and crystalline dimensions are signatures of this structure. We observe that the templated chiral ZIF can facilitate the enantiotropic sensing. It shows enantioselective recognition and chiral sensing abilities with a low limit of detection of 39 μM and the corresponding limit of chiral detection of 300 μM for representative chiral amino acid, D- and L- alanine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Engineering Enzymes for Environmental Sustainability

The development and implementation of more efficient and sustainable technologies is key to delivering our net–zero targets. Here we review how engineered enzymes, with a focus on those developed using directed evolution, can be deployed to improve the sustainability of numerous processes and help to conserve our environment. Efficient and robust biocatalysts have been engineered to capture carbon dioxide (CO2) and have been embedded into new efficient metabolic CO2 fixation pathways. Enzymes have been refined for bioremediation, enhancing their ability to degrade toxic and harmful pollutants. Biocatalytic recycling is gaining momentum, with engineered cutinases and PETases developed for the depolymerization of the abundant plastic, PET. Finally, biocatalytic approaches for accessing petroleum–based feedstocks and chemicals are expanding, using optimized enzymes to convert plant biomass into biofuels or other high value products. Finally, through these examples, we hope to illustrate how enzyme engineering and biocatalysis can contribute to the development of more environmentally sustainable approaches, in order to protect our planet.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanisms of Biomolecular Self–Assembly Investigated Through In Situ Observations of Structures and Dynamics

Biomolecular self-assembly of hierarchical materials is a precise and adaptable bottom-up approach to synthesizing across scales with considerable energy, health, environment, sustainability, and information technology applications. To achieve desired functions in biomaterials, it is essential to directly observe assembly dynamics and structural evolutions that reflect the underlying energy landscape and the assembly mechanism. This review will summarize the current understanding of biomolecular assembly mechanisms based on in situ characterization and discuss the broader significance and achievements of newly gained insights. In addition, we will also introduce how emerging deep learning/machine learning-based approaches, multiparametric characterization, and high-throughput methods can boost the development of biomolecular self-assembly. Furthermore, the objective of this review is to accelerate the development of in situ characterization approaches for biomolecular self-assembly and to inspire the next generation of biomimetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Toward Ultra‐High‐Quality‐Factor Wireless Masing Magnetic Resonance Sensing

It has recently been shown that a bolus of hyperpolarized nuclear spins can yield stimulated emission signals similar in nature to maser signals, potentially enabling new ways of sensing hyperpolarized contrast media, including most notably [1- 13 C]pyruvate that is under evaluation in over 50 clinical trials for metabolic imaging of cancer. The stimulated NMR signal emissions lasting for minutes do not require radio-frequency excitation, offering unprecedented advantages compared to conventional MR sensing. However, creating nuclear spin maser emission is challenging in practice due to stringent fundamental requirements, making practical in vivo applications hardly possible using conventional passive MR detectors. Here, in this study, we demonstrate the utility of a wireless NMR maser detector, the quality factor of which was enhanced 22-fold (to 1,670) via parametric pumping. This active-feedback technique breaks the intrinsic fundamental limit of NMR detector circuit quality factor. We show the use of parametric pumping to reduce the threshold requirement for inducing nuclear spin masing at 300 MHz resonance frequency in a preclinical MRI scanner. Indeed, stimulated emission from hyperpolarized protons was obtained under highly unfavorable conditions of low magnetic field homogeneity (T 2 * of 3 ms). Greater gains of the quality factor of the MR detector (up to 1 million) were also demonstrated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Propane Dehydrogenation on Pt x Zn y Active Sites in Silicalite‐1

Abstract The improvement of Pt‐based catalysts for propane dehydrogenation (PDH) has progressed by recent investigations that have identified Zn as a promising promoter for Pt subnanometer catalysts. It is desirable to gain insights into the structure, stability, and activity of such active sites and the factors that influence them, such as Zn : Pt ratio, Pt coordination and nuclearity. Here, we employ density functional theory and microkinetic simulations to investigate the stability of Pt x Zn y ( x =1–3, y=0–3) active sites grafted on silanols of Silicalite‐1 and the PDH activity of Pt. We find that the coordination of a Pt atom to a nest of grafted Zn(II) atoms increases the stability of the Pt 1 Zn y sites, whose activity is similar for y=0–2 and drops dramatically for y>2. We further demonstrate, via linear scaling relations and microkinetic simulations, that the turnover frequency obeys a volcano law as a function of propylene binding strength. The Pt 2 Zn 1 and Pt 3 Zn 1 sites are stable and exhibit activity similar to Pt 1 Zn 2 , but only Pt 1 Zn 2 manifests reaction kinetics consistent with experimental data, strongly suggesting the active site composition in the synthesized catalyst samples. The methodology presented here suggests a general strategy for deducing active site information such as composition through simple kinetic experiments.

Liu, Yilang↗
DOE OSTI2024

A New Class of Oxyhalide Solid Electrolytes NaNbCl 6‐2x O x for Solid‐state Sodium Batteries

Abstract Sodium‐based batteries are gaining momentum due to the abundance and lower cost of sodium compared to lithium. Solid‐state sodium batteries can also provide further safety advantages. However, sodium‐based solid‐state electrolytes (SSEs) that meet all the rigorous requirements, such as high ionic conductivity, oxidative stability with the cathode, and ease of processability, are lacking. We present here a new class of sodium‐based oxyhalide electrolytes NaNbCl 6‐2x O x with a facile mechanochemical synthesis. The oxyhalide NaNbCl 4 O exhibits close to two orders of magnitude higher ambient‐temperature sodium‐ion conductivity (1.03×10 −4 S cm −1 ) compared to the halide counterpart NaNbCl 6 (3×10 −6 S cm −1 ). Structural motifs unique to the oxygen content in NaNbCl 6‐2x O x are identified with 23 Na and 93 Nb magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy and x‐ray diffraction (XRD). Solid‐state sodium batteries assembled with NaNbCl 4 O electrolyte and the cobalt‐ and nickel‐free layered Na 0.70 Fe 0.3 Mn 0.65 Al 0.05 O 2 cathode exhibit a maximum discharge capacity of 155 mAh g −1 with good cycle life at ambient temperature.

Kmiec, Steven↗
DOE OSTI2025

A Diazo Linker Ligand Promotes Flexibility and Induced Fit Binding in a Microporous Copper Coordination Network

Abstract Flexible organic linkers represent an intuitive and effective strategy to design flexible metal–organic materials. We report herein a systematic study concerning the effect of varying the central bond of mixed pyridyl‐benzoate linkers, L, upon the flexibility of three isostructuralkddtopology microporous coordination networks (CNs) of formula ML 2 :X‐kdd‐1‐Cu,1= L = (E)‐4‐(pyridin‐4‐yldiazenyl)benzoate;X‐kdd‐2‐Cu,2= L = (E)‐4‐(2‐(pyridin‐4‐yl)vinyl)benzoate; the previously reportedX‐kdd‐3‐Cu,3= L = 4‐(pyridin‐4‐ylethynyl)benzoate. As revealed by single crystal x‐ray diffraction (SCXRD) and gas sorption studies,X‐kdd‐1‐Cu, exhibited gate‐opening during CO 2 and hydrocarbon (C2 and C8) sorption experiments whereas the other two CNs did not. Insight into these phase transformations was gained from in situ variable‐pressure and variable temperature powder X‐ray diffraction (PXRD), SCXRD, and modeling. Rotation of ligand1around the diazo bond, torsion angle changes between phenyl and carboxylate moieties, and deformation of the Cu‐based rod building blocks enabled activatedX‐kdd‐1‐Cuto form new phases with C8 isomers and CH 2 Cl 2 , CH 2 Cl 2 inducing contraction of the activated phase. Computational studies suggest that1enables flexibility thanks to its lower barrier of deformation versus2or3. This study teaches that diazo moieties could offer a general strategy to enhance the flexibility of CNs.

Chemistry↗
DOE OSTI2025

Cu‐Catalyzed Aerobic Oxidative C─C Cleavage in Lignin‐Derived Oligomers and Biological Funneling of the Monomeric Products

Existing methods for lignin deconstruction to aromatic monomers primarily cleave carbon–oxygen bonds within the polymer, resulting in sub-optimal monomer yields and formation of oligomers that retain intact carbon–carbon bonds. Here, we demonstrate that copper-catalyzed aerobic oxidation under aqueous alkaline conditions promotes oxidative cleavage of carbon–carbon bonds in lignin oligomers derived from reductive catalytic fractionation (RCF) of pine and poplar biomass. Fundamental insights are gained from reactions of model compounds that resemble subunits present in RCF oligomers. Optimal results are achieved in a flow reactor that provides precise control over O2 delivery, temperature, and reaction residence time. The Cu-catalyzed aerobic oxidation conditions access aromatic monomers in 19 and 34 wt% monomer yields, respectively, from pine- and poplar-derived RCF oligomers. Overall, the sequence consisting of biomass RCF into monomers and oligomers followed by oxidative deconstruction of the RCF oligomers generates substantially higher yields of aromatic monomers from lignin. Engineered strains of Pseudomonas putida support biological funneling of the oligomer-derived oxygenated aromatic compounds into cis,cis-muconic acid from pine or 2-pyrone-4,6-dicarboxylic acid from poplar.

09 BIOMASS FUELS↗
DOE OSTI2025

Probing Photoelectrochemical Hydrogen and Oxygen Evolution at Individual Al:SrTiO 3 /Rh 2–y Cr y O 3 Photocatalyst Particles

Particle-based photocatalysts for overall water splitting convert solar energy into hydrogen fuel without the use of any photovoltaic devices. As such they have the potential to revolutionize renewable energy production on Earth. While proven efficiencies have reached 1.1%, further improvements of photocatalyst technology depend on a better understanding of energy loss mechanisms on the individual particle level. Here, we conduct the first in operando photoelectrochemical measurements on individual micrometer-sized Al-doped SrTiO 3 /Rh 2–y CryO 3 photocatalyst particles. We find that the photocatalyst particles behave mainly as water oxidation photoanodes reaching up to 0.5 mA cm −2 at 0.8 V versus RHE and a photovoltage of ∼1.00 V under 4.7 mW cm −2 ultraviolet illumination. This proves that charge separation in the unbiased Al:SrTiO 3 /Rh 2–y Cr y O 3 catalyst is driven by a junction at the n-semiconductor-liquid contact. While O 2 is detected symmetrically around photocatalyst particles, uneven H 2 evolution profiles reflect an irregular Rh 2–y Cr y O 3 cocatalyst distribution. Additionally, the H 2 evolution activity varies significantly between different photocatalyst particles. Furthermore, this suggests that performance gains are possible by better controlling catalyst composition on the microscale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Carbon fiber/epoxy vitrimer composite patch cured with bio‐based curing agents for one‐step repair metallic sheet and its recyclability

Abstract Vitrimers have gained a great deal of attention from researchers, yet research on its application is still lacking. This study, a novel bio‐based vitrimer was developed from epoxy (EP) and bio‐based curing agents, that is, cashew nut shell liquid (CNSL) and citric acid (CA), and then reinforced by carbon fiber. The vitrimers with different ratios of acid to epoxy (R ratio) at 0.30–0.40 contained ester and ether linkages. All EP/CA/CNSL vitrimers showed the stress relaxation over 70–100°C due to transesterification. The vitrimers were applied as polymer matrices for the carbon fiber composites and then used as repair patches. By using the carbon fiber‐reinforced vitrimer with the R ratio of 0.30, patch repair on a damaged alloy sheet revealed that approximately 98% of the tensile strength of the damaged alloy sheet was recovered. The vitrimer can be dissolved from carbon fiber composite to recover carbon fiber. The recovered carbon fiber retained good tensile strength compared to the pristine composite. Based on this study, the EP/CA/CNSL vitrimers showed the comparable thermomechanical properties with the epoxy vitrimer cured by the petroleum‐based curing agent. The vitrimer composite patch could therefore be an alternative new repair method to extend the service life of damaged structures.

Lorwanishpaisarn, Narubeth↗
DOE OSTI2023

Magnetocaloric Effect in Lightly‐Doped Fe 5 Si 3 Single Crystals

Abstract Development of promising new materials for above room temperature magnetic cooling applications relies on careful balancing of structure and composition to maximize accessible metastable phases that can drive a strong magnetocaloric effect (MCE). However, the working temperatures of these materials may fall outside of desired application windows. In this work, it is shown that it is possible to control metastable phase stability temperatures of Fe 5 Si 3 through selection of appropriate spin and charge doping. Here, the parent material's desired structure appears only within a narrow temperature range from 1098 to 1303 K. Doping with Mn and P is shown to allow stabilization of the parent's high temperature phase and resulting MCE to room temperature. The structural and magnetic properties, and the magnetocaloric effect of single crystal Fe 4.83 Mn 0.16 Si 2.91 P 0.09 (FMSP) are investigated experimentally and theoretically. A first‐order magneto‐elastic transition is observed at 348 K, where magnetic onset is accompanied by a change in lattice volume without an apparent change in crystal symmetry. Although the trace Mn and P doping are found to decrease the T C , the maximum magnetic entropy change Δ S Max ( T ) and the relative cooling power (RCP) of FMSP are enhanced compared to polycrystalline Fe 5 Si 3 . As a result, an intrinsically broader entropy change over a larger temperature span is generated in the lightly doped single crystal of Fe 5 Si 3 . The magnetic moment of the system is also enhanced. Density functional theory (DFT) calculations are performed to gain microscopic insights into the experimental findings. The results suggest that the hexagonal Fe 5 Si 3 is a new giant room temperature MCE material that is on par with La–Fe–Si and Fe‐Mn‐P‐Si systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Distinct Composition‐Dependent Topological Hall Effect in Mn 2‐x Zn x Sb

Abstract Spintronics, an evolving interdisciplinary field at the intersection of magnetism and electronics, explores innovative applications of electron charge and spin properties for advanced electronic devices. The topological Hall effect (THE), a key component in spintronics, has gained significance due to emerging theories surrounding noncoplanar chiral spin textures. This study focuses on Mn 2‐x Zn x Sb, a material crystalizing in centrosymmetric space group with rich magnetic phases tunable by Zn contents. Through comprehensive magnetic and transport characterizations, we found that the high‐Zn ( x > 0.6) samples display THE which is enhanced with decreasing temperature, while THE in the low‐Zn ( x < 0.6) samples show an opposite trend. The coexistence of those distinct temperature dependencies for THE suggests very different magnetic interactions/structures for different compositions and underscores the strong coupling between magnetism and transport in Mn 2‐x Zn x Sb. The findings contribute to understanding topological magnetism in centrosymmetric tetragonal lattices, establishing Mn 2‐x Zn x Sb as a unique platform for exploring tunable transport effects and opening avenues for further exploration in the realm of spintronics.

Nabi, Md Rafique Un↗
DOE OSTI2020

Briquetting characteristics of woody and herbaceous biomass blends: Impact on physical properties, chemical composition, and calorific value

Abstract Intercropping (or polyculture) is gaining a lot of interest as it increases yields, allows better utilization of resources (water and nutrients), and provides better land management. The objective of this study is to understand the briquetting characteristics of woody and herbaceous biomass blends, which might result from intercropping. Tests were conducted on blends of lodgepole pine, switchgrass, and corn stover biomass using three hammer mill screen sizes (i.e., 4.8, 12.7, and 19.05 mm), three blend moistures (12%, 15%, and 18%, w.b.), and two‐ and three‐blend ratios (i.e., 1:1 and 1:1:1) using a pilot‐scale hydraulic briquette press. The briquette properties, such as unit and bulk density, durability rating after 5 days of storage (as they tend to attain stable density), and the energy consumption of the process were measured. The results indicate that moisture content of 12% and 15% (w.b.) and smaller hammer mill screen size of 4.8 mm increased the unit and bulk densities to >750 and >430 kg/m 3 and moisture content (15% and 18% (w.b.)) and hammer mill screen size of 12.7 and 19.05 mm produced briquettes with durability rating values of >95%. The higher moisture content of 18% (w.b.) and the hammer mill screen size of 12.7 and 19.05 mm had the highest energy consumption. The proximate and ultimate analysis showed that energy content improved by blending lodgepole pine with both corn stover and switchgrass and also showed increased calorific value and reduced ash content. Scanning electron microscopy micrographs showed interlocking of particles and cracks in the briquettes. © 2020 Society of Chemical Industry and John Wiley & Sons, Ltd

Tumuluru, Jaya Shankar↗