SEARCH · Engineering Papers

Results for “forests”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

All sources NASA NTRS DOE OSTI

NASA NTRS2013

Missing Peroxy Radical Sources Within a Rural Forest Canopy

Organic peroxy (RO2) and hydroperoxy (HO2) radicals are key intermediates in the photochemical processes that generate ozone, secondary organic aerosol and reactive nitrogen reservoirs throughout the troposphere. In regions with ample biogenic hydrocarbons, the richness and complexity of peroxy radical chemistry presents a significant challenge to current-generation models, especially given the scarcity of measurements in such environments. We present peroxy radical observations acquired within a Ponderosa pine forest during the summer 2010 Bio-hydro-atmosphere interactions of Energy, Aerosols, Carbon, H2O, Organics and Nitrogen - Rocky Mountain Organic Carbon Study (BEACHON-ROCS). Total peroxy radical mixing ratios reach as high as 180 pptv and are among the highest yet recorded. Using the comprehensive measurement suite to constrain a near-explicit 0-D box model, we investigate the sources, sinks and distribution of peroxy radicals below the forest canopy. The base chemical mechanism underestimates total peroxy radicals by as much as a factor of 3. Since primary reaction partners for peroxy radicals are either measured (NO) or under-predicted (HO2 and RO2, i.e. self-reaction), missing sources are the most likely explanation for this result. A close comparison of model output with observations reveals at least two distinct source signatures. The first missing source, characterized by a sharp midday maximum and a strong dependence on solar radiation, is consistent with photolytic production of HO2. The diel profile of the second missing source peaks in the afternoon and suggests a process that generates RO2 independently of sun-driven photochemistry, such as ozonolysis of reactive hydrocarbons. The maximum magnitudes of these missing sources (approximately 120 and 50 pptv min−1, respectively) are consistent with previous observations alluding to unexpectedly intense oxidation within forests. We conclude that a similar mechanism may underlie many such observations.

atmosphere↗

NASA NTRS2014

The Uncertainty of Biomass Estimates from LiDAR and SAR Across a Boreal Forest Structure Gradient

In this study, weexamined the uncertainty of aboveground live biomass (AGB) estimates based on light detection and ranging (LiDAR) and synthetic aperture radar (SAR) measurements distributed across a low-biomass vegetation structure gradient fromforest to non-forest in boreal-like ecosystems. The conifer-dominant structure gradient was compiled from ground data amassed from multiple field expeditions in central Maine (USA), Aurskog (Norway), and across central Siberia (Russia). Single variable empirical models were built tomodel AGB fromremote sensingmetrics. Using thesemodels, we calculated a rootmean square error (RMSE) and a 95% confidence interval (CI) of the RMSE fromthe difference between the remote sensing AGB predictions and the ground reference AGB estimates within AGB intervals across a 0-100 Mg ha(exp.−1) boreal forest structure gradient. The results show that the error in AGB predictions (RMSE) and the error uncertainty (the CI) from LiDAR and SAR change across a forest gradient. The errors of airborne LiDAR and SAR metrics and spaceborne LiDAR platforms show a general trend of reduced relative errors as AGBmagnitudes increase, particularly from0 to 60 Mg ha (exp.−1). Empirical models relating spaceborne metrics to AGB and estimates of spaceborne LiDAR error uncertainty demonstrate the difficulty of characterizing differences in AGB at the site-level with current spaceborne sensors, particularly below 80 Mg ha (exp.−1) with less than 50-100% error.

Taiga↗

NASA NTRS2014

Revised (Mixed-Effects) Estimation for Forest Burning Emissions of Gases and Smoke, Fire/Emission Factor Typology, and Potential Remote Sensing Classification of Types for Ozone and Black-Carbon Simulation

We summarize recent progress (a) in correcting biomass burning emissions factors deduced from airborne sampling of forest fire plumes, (b) in understanding the variability in reactivity of the fresh plumes sampled in ARCTAS (2008), DC3 (2012), and SEAC4RS (2013) airborne missions, and (c) in a consequent search for remotely sensed quantities that help classify forest-fire plumes. Particle properties, chemical speciation, and smoke radiative properties are related and mutually informative, as pictures below suggest (slopes of lines of same color are similar). (a) Mixed-effects (random-effects) statistical modeling provides estimates of both emission factors and a reasonable description of carbon-burned simultaneously. Different fire plumes will have very different contributions to volatile organic carbon reactivity; this may help explain differences of free NOx(both gas- and particle-phase), and also of ozone production, that have been noted for forest-fire plumes in California. Our evaluations check or correct emission factors based on sequential measurements (e.g., the Normalized Ratio Enhancement and similar methods). We stress the dangers of methods relying on emission-ratios to CO. (b) This work confirms and extends many reports of great situational variability in emissions factors. VOCs vary in OH reactivity and NOx-binding. Reasons for variability are not only fuel composition, fuel condition, etc., but are confused somewhat by rapid transformation and mixing of emissions. We use "unmixing" (distinct from mixed-effects) statistics and compare briefly to approaches like neural nets. We focus on one particularly intense fire the notorious Yosemite Rim Fire of 2013. In some samples, NOx activity was not so suppressed by binding into nitrates as in other fires. While our fire-typing is evolving and subject to debate, the carbon-burned delta(CO2+CO) estimates that arise from mixed effects models, free of confusion by background-CO2 variation, should provide a solid base for discussion. (c) We report progress using promising links we find between emissions-related "fire types" and promising features deducible from remote observations of plumes, e.g., single scatter albedo, Angstrom exponent of scattering, Angstrom exponent of absorption, (CO column density)/(aerosol optical depth).

Remote sensing↗

NASA NTRS2016

Wildfires Dynamics in Siberian Larch Forests

Wildfire number and burned area temporal dynamics within all of Siberia and along a south-north transect in central Siberia (45deg-73degN) were studied based on NOAA/AVHRR (National Oceanic and Atmospheric Administration/ Advanced Very High Resolution Radiometer) and Terra/MODIS (Moderate Resolution Imaging Spectroradiometer) data and field measurements for the period 1996-2015. In addition, fire return interval (FRI) along the south-north transect was analyzed. Both the number of forest fires and the size of the burned area increased during recent decades (p < 0.05). Significant correlations were found between forest fires, burned areas and air temperature (r = 0.5) and drought index (The Standardized Precipitation Evapotranspiration Index, SPEI) (r = 0.43). Within larch stands along the transect, wildfire frequency was strongly correlated with incoming solar radiation (r = 0.91). Fire danger period length decreased linearly from south to north along the transect. Fire return interval increased from 80 years at 62 N to 200 years at the Arctic Circle (6633' N), and to about 300 years near the northern limit of closed forest stands (about 71+ N). That increase was negatively correlated with incoming solar radiation (r = 0.95). Keywords: wildfires; drought index; larch stands; fire return interval; fire frequency; burned area; climate-induced trends in Siberian wildfires

wildfires↗

NASA NTRS2016

Assessing the Transferability of Statistical Predictive Models for Leaf Area Index Between Two Airborne Discrete Return LiDAR Sensor Designs Within Multiple Intensely Managed Loblolly Pine Forest Locations in the South-Eastern USA

Leaf area is an important forest structural variable which serves as the primary means of mass and energy exchange within vegetated ecosystems. The objective of the current study was to determine if leaf area index (LAI) could be estimated accurately and consistently in five intensively managed pine plantation forests using two multiple-return airborne LiDAR datasets. Field measurements of LAI were made using the LiCOR LAI2000 and LAI2200 instruments within 116 plots were established of varying size and within a variety of stand conditions (i.e. stand age, nutrient regime and stem density) in North Carolina and Virginia in 2008 and 2013. A number of common LiDAR return height and intensity distribution metrics were calculated (e.g. average return height), in addition to ten indices, with two additional variants, utilized in the surrounding literature which have been used to estimate LAI and fractional cover, were calculated from return heights and intensity, for each plot extent. Each of the indices was assessed for correlation with each other, and was used as independent variables in linear regression analysis with field LAI as the dependent variable. All LiDAR derived metrics were also entered into a forward stepwise linear regression. The results from each of the indices varied from an R2 of 0.33 (S.E. 0.87) to 0.89 (S.E. 0.36). Those indices calculated using ratios of all returns produced the strongest correlations, such as the Above and Below Ratio Index (ABRI) and Laser Penetration Index 1 (LPI1). The regression model produced from a combination of three metrics did not improve correlations greatly (R2 0.90; S.E. 0.35). The results indicate that LAI can be predicted over a range of intensively managed pine plantation forest environments accurately when using different LiDAR sensor designs. Those indices which incorporated counts of specific return numbers (e.g. first returns) or return intensity correlated poorly with field measurements. There were disparities between the number of different types of returns and intensity values when comparing the results from two LiDAR sensors, indicating that predictive models developed using such metrics are not transferable between datasets with different acquisition parameters. Each of the indices were significantly correlated with one another, with one exception (LAI proxy), in particular those indices calculated from all returns, which indicates similarities in information content for those indices. It can then be argued that LiDAR indices have reached a similar stage in development to those calculated from optical-spectral sensors, but which offer a number of advantages, such as the reduction or removal of saturation issues in areas of high biomass.

Sumnall, Matthew↗

NASA NTRS2016

Modeling Forest Biomass and Growth: Coupling Long-Term Inventory and Lidar Data

Combining spatially-explicit long-term forest inventory and remotely sensed information from Light Detection and Ranging (LiDAR) datasets through statistical models can be a powerful tool for predicting and mapping above-ground biomass (AGB) at a range of geographic scales. We present and examine a novel modeling approach to improve prediction of AGB and estimate AGB growth using LiDAR data. The proposed model accommodates temporal misalignment between field measurements and remotely sensed data-a problem pervasive in such settings-by including multiple time-indexed measurements at plot locations to estimate AGB growth. We pursue a Bayesian modeling framework that allows for appropriately complex parameter associations and uncertainty propagation through to prediction. Specifically, we identify a space-varying coefficients model to predict and map AGB and its associated growth simultaneously. The proposed model is assessed using LiDAR data acquired from NASA Goddard's LiDAR, Hyper-spectral & Thermal imager and field inventory data from the Penobscot Experimental Forest in Bradley, Maine. The proposed model outperformed the time-invariant counterpart models in predictive performance as indicated by a substantial reduction in root mean squared error. The proposed model adequately accounts for temporal misalignment through the estimation of forest AGB growth and accommodates residual spatial dependence. Results from this analysis suggest that future AGB models informed using remotely sensed data, such as LiDAR, may be improved by adapting traditional modeling frameworks to account for temporal misalignment and spatial dependence using random effects.

Babcock, Chad↗

NASA NTRS2017

Forest Structure Retrieval From EcoSAR P-Band Single-Pass Interferometry

EcoSAR is a single-pass (dual antenna) digital beamforming, P-band radar system that is designed for remote sensing of dense forest structure. Forest structure retrievals require the measurement related to the vertical dimension, for which several techniques have been developed over the years. These techniques use polarimetric and interferometric aspects of the SAR data, which can be collected using EcoSAR. In this paper we describe EcoSAR system in light of its interferometric capabilities and investigate forest structure retrieval techniques.

SAR↗

NASA NTRS2018

Forest Structure Retrieval from Ecosar P-Band Single-Pass Interferometry

Osmanoglu, Batuhan↗

NASA NTRS2018

GC11H _ 0998: A spatial pattern analysis of forest loss in the Madre de Dios region, Peru

Previous studies have quantified the extension of gold mining activities and associated it with forest loss in the Madre de Dios region of Peru. This study uses Spectral Mixture Analysis (SMA) in a cloud-computing platform to map forest loss within and outside key land tenure areas in this region, Landsat 7 Enhanced Thematic Mapper plus (ETM+) and Landsat 8 Operational land Imager (OLI) Surface Reflectance data were utilized spanning 2013 and 2017 and spectral unmixing was performed to identify patterns of forest loss for each year. Planet Scope and RapidEye imagery were used to conduct an accuracy assessment and to identify potential drivers.

Puzzi Nicolau, Andrea↗

NASA NTRS2019

A Spatial Pattern Analysis of Forest Loss in the Madre de Dios Region, Peru

Previous studies have quantified the expansion of gold mining-related forest loss (Espejo et al., 2018; Asner et al., 2017; Swenson et al., 2011) in the Madre de Dios region of Peru. This study uses Spectral Mixture Analysis (SMA) in a cloud-computing platform to map general forest loss within and outside key land tenure areas in this region. Landsat 7 Enhanced Thematic Mapper plus (ETM+) and Landsat 8 Operational Land Imager (OLI) Surface Reflectance data were utilized spanning 2013 and 2018 and spectral unmixing was performed to identify patterns of forest loss for each year. Planet Scope and RapidEye imagery were used to conduct an accuracy assessment and to identify potential drivers.

Puzzi Nicolau, Andrea↗

NASA NTRS2020

Search and Rescue under the Forest Canopy using Multiple UAS

We consider the problem of multi-robot search and rescue under the forest canopy. Forest is a particularly challenging environment for collaborative mapping and exploration, mainly due to the existence of severe perceptual aliasing, which hinders reliable mutual localization and map fusion. Our proposed system features unmanned aerial vehicles (UAVs) with onboard sensing and autonomy. Each UAV runs a lightweight filtering algorithm for local state estimation, and a dynamic-aware frontier selection algorithm for fast exploration. The essential and computationally intensive task of collaborative simultaneous localization and mapping (CSLAM) is performed at a central ground station. To handle perceptual aliasing, we make use of stable landmarks extracted from trees, which significantly improve precision and recall during place recognition. Furthermore, to recover from incorrect pairwise data associations during loop closure, we propose a novel procedure for global data association based on recently developed techniques on cycle consistent multiway matching. Our algorithm returns a global data association that is guaranteed to be cycle consistent, and is shown to significantly improve precision compared to the input pairwise associations. The overall multi-UAV system is extensively validated during real-world collaborative exploration missions in a forest at NASA Langley Research Center.

Multi-robot systems↗

NASA NTRS2020

Gila Water Resources II: Using Earth Observations to Identify Wildfire Impacts on Hydrologic Functions and Recovery in the Gila National Forest

Wildfires have the potential to cause devastating and long-lasting impacts on ecological systems. In the Gila NF, wildfire events have occurred with increasing frequency and severity over recent years. These disturbances such as the historic Whitewater-Baldy Complex Fire (2012) and Silver Fire (2013) have raised concerns over post-fire soil erosion, flooding, debris flows, and vegetation recovery. Understanding the connection between burn events and ecological functions is crucial for developing effective land management practices within the Gila NF that ensure the conservation of the watershed. Our Gila Water Resources II team worked in partnership with the US Department of Agriculture (USDA) US Forest Service’s (USFS) Gila National Forest and Region 3. This project was designed to provide insight into the influence of wildfires on increased flooding events and to determine if restoration efforts in the Gila NF are having a beneficial and noticeable impact on recovery. The goals of this project included generating data-supported end products to inform land management decisions, including the prioritization of specific regions and time scales for post-fire restoration efforts. To understand recovery trends and hydrologic impact in the Gila NF between 2000 and 2020, this project used NASA EO and ancillary data, including, but not limited to, Landsat 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 Operational Land Imager (OLI), USGS stream gauge data, and data provided by USDA USFS’s Gila National Forest and Region 3.

Water Resources↗

NASA NTRSDate not supplied

Using NASA Earth Observations to Identify Wildfire Impacts on Hydrologic Functions and Recovery in the Gila National Forest

Wildfires can dramatically influence both abiotic and biotic components of a landscape, including soil stability and chemistry; vegetation health, density, and composition; and water flow and quality. In addition to the immediate hazards posed by wildfires, subsequent hazards such as flooding and debris flow can impact the area. In New Mexico’s Gila National Forest, wildfire events have occurred with increasing frequency and severity over recent years, notably including the Whitewater Baldy Complex Fire (2012) and Silver Fire (2013), which burned over 290,000 acres and 138,698 acres, respectively, according to the Burned Area Emergency Response Team Executive Summary reports. Following a significant wildfire, land and resource management decisions are made, including when and where to focus vegetation and stream restoration efforts. This research is the result of a collaboration between the NASA DEVELOP National Program and the US Forest Service, which aimed to utilize NASA Earth observations to help inform those critical land management decisions. The project had two main objectives: 1) assess the efficacy of post-fire vegetation restoration efforts and 2) analyze the impact of burn events on the hydrology at the watershed-scale. To accomplish this first goal, data from Landsat 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), and Landsat 8 Operational Land Imager (OLI) were used to study the vegetation health over time of treated and non-treated burn areas. To accomplish the latter, various aspects of stream behavior were examined in relation to burn events, including the runoff coefficient and “flashiness” of streams based on USGS stream gauge data and Integrated Multi-satelllite Retrievals for GPM (IMERG) precipitation data. This will allow land managers to better understand the complex ecological relationship between the cascading effects after wildfire and the greater forest ecosystem.

Madeline Allen↗

NASA NTRS1995

Spaceborne Applications of P-Band Imaging Radars for Measuring Forest Biomass

In three test sites of boreal and temperate forests, P-band polarimetric radar data estimate total above-ground dry woody biomass with 10 to 30 of the actual biomass values, depending on the complexity of the forest. A description and examples of the process are provided. The worldwide need for large scale, updated biomass estimates, achieved with a uniformly applied method, justifies a more in-depth exploration of long wavelength imaging radar applications for tropical forest inventories.

Oren, Ram↗

NASA NTRSDate not supplied

Evaluating Current and Future Sensor-Specific Biomass Calibration in the Tallest Mangrove Forest on Earth

High-resolution global-scale estimates of aboveground biomass density will soon be available from a suite of spaceborne LiDAR and radar missions. The 2016-2017 AfriSAR campaign was specifically designed to evaluate a suite of sensors for estimating biomass in a range of tropical forest environments. Here, we compare the calibration and biomass estimates from 5 different active sensors - ALOS Global Digital Surface Model (DSM), Shuttle Radar Topography Mission (SRTM), Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR), NASA Land Vegetation Ice Sensor (LVIS), and TanDEM-X (TDX) - in the tallest known mangrove forest on Earth - Pongara National Park, Gabon. We leverage this comparison to evaluate the implications for future satellite missions that are aimed at improving global estimates of forest carbon storage. Our findings are directly relevant for space-borne missions estimating terrestrial carbon storage - GEDI, ICESat-2, NISAR, BIOMASS, Tandem-X, and Tandem-L - highlighting the specific uncertainty and bias that can be expected in several global biomass products in mangrove ecosystems.

Atticus E L Stovall↗

NASA NTRS2021

Understanding Uncertainty of Snow Radiative Transfer Modeling Within a Mixed Deciduous and Evergreen Forest

Satellite-based passive microwave observations provide the best available continuous observational estimates of global snow water storage due to their broad geographic footprint and low sensitivity to clouds and precipitation. However, these observations are subject to substantial uncertainty due to the complex radiative properties of snow and from interference in forested areas. Physical radiative transfer models can be leveraged to improve the fidelity of these observations and as a data-assimilation tool. In this article, the Dense Media Radiative Transfer model with Multiple Layers (DMRT-ML) is used to simulate snow brightness temperatures from data collected from snow pits excavated during a two-day-long field study performed a temperate forest in the Northeast United States. The simulations are evaluated against surface-based radiometer observations collected at the snow pits. The DMRT-ML is configured with varying complexity to determine the snowpack characteristics most essential toward simulating brightness temperature within a temperate forest with complicated snow stratigraphy. In general, the single-layer configurations were not sufficiently complex to accurately simulate snow brightness temperature without significant tuning. The most accurate simulation was a two-layer configuration with a prescribed ice layer separating the snow layers. This simulation had a root-mean-square error <;15 K for the 37-GHz frequency. More complicated snowpack stratigraphy configurations did not substantively improve the results over the two-layer model configuration. The DMRT-ML was also used to examine differences between redundant datasets of density and grain size. It was determined that similar snow data collection and radiative transfer model configuration techniques are critical to ensure cross-study comparability.

Theodore Letcher↗

NASA NTRS2021

Three-dimensional estimation of deciduous forest canopy structure and leaf area using multi-directional, leaf-on and leaf-off airborne lidar data

Airborne laser scanning (ALS) has been widely used to map gap probability and leaf area index (LAI) distribution at plot and landscape scales. As an indirect measurement, most ALS methods to estimate LAI combine waveform or point density information with supporting field measurements such as the leaf angle distribution, gap probability, or direct LAI measures. The development of a more independent estimation approach would facilitate more widespread use of existing ALS data to investigate patterns of forest structure and build realistic 3-D vegetation scenes to simulate remote sensing imagery and energy balance. Here, we develop a data processing workflow (named PVlad) using ALS point cloud apparent reflectance to estimate LAI and voxel-based leaf area density (LAD), aiming to reduce the need for associated field measurements such as the gap probability. The adaptation of the path volume (PV) concept derived from apparent reflectance integrates information from multi-directional ALS pulses, and quantifies the percentage exploration of each voxel for classification and occlusion correction, such that rigorous volumetric sampling approaches can be developed to derive LAI and LAD. The PVlad workflow was applied to discrete-return lidar data (Riegl VQ480i) acquired by NASA Goddard's LiDAR, Hyperspectral and Thermal Imager (G-LiHT) Airborne Imager during leaf-on (summer) and leaf-off (spring) conditions at the Smithsonian Environmental Research Center (SERC). The estimates of LAI and LAD captured structural differences between mature, logged, and intermediate-aged stands over eight deciduous forest plots. The derived LAI values were compared to field litter collection measurements, and the derived LAD vertical distribution was compared to the output of the VoxLAD model using terrestrial laser scan (TLS) field survey data. Using voxel sizes ranging from 0.5 m to 5 m, overall LAI estimation showed linear fitting coefficient bias and for 1 and 2 m voxel sizes, and vertical LAD distribution showed strong correlation with and for 0.5 and 1m voxel sizes. For every forest stand, upper-canopy LAD had a low variance for voxel sizes of ≤ . Application of PVlad to the G-LiHT and other similar ALS data archives enables the development of fine-resolution LAI map products, including voxelization of LAD for ecosystem science and radiative transfer simulations of remote sensing imagery or surface energy balance.

Tiangang Yin↗

NASA NTRS2022

Integrated Topographic Corrections Improve Forest Mapping Using Landsat Imagery

In mountainous environments, topography strongly affects the reflectance due to illumination effects and cast shadows, which introduce errors in land cover classifications. However, topographic correction is not routinely implemented in standard data pre-processing chains (e.g., Landsat Analysis Ready Data), and there is a lack of consensus whether topographic correction is necessary, and if so, how to conduct it. Furthermore, methods that correct simultaneously for atmospheric and topographic effects are becoming available, but they have not been compared directly. Our objects were to investigate (1) the effectiveness of two topographic correction approaches that integrate atmospheric and topographic correction, (2) improvements in classification accuracy when analyzing topographically corrected single-date imagery (14 July 2016 and 2 October 2016), versus a full Landsat time series from 2014 to 2016, and 3) improvements in classification accuracy when including additional terrain information (i.e., topographic slope, elevation, and aspect). We developed a physical based model and compared it with an enhanced C-correction, both of which integrate atmospheric and topographic correction. We compared classification accuracies with and without topographic correction using combinations of single-date imagery, image composites and spectral-temporal metrics generated from the full Landsat time series, and additional terrain information in the Caucasus Mountains. We found that both the enhanced C-correction and the physical model performed very well and largely eliminated the correlation (Pearson’s correlation coefficient r ranges from 0.06 to 0.24) between surface reflectance and illumination condition, but the physical model performed best (r ranges from 0.05 to 0.11). Both image composites, and spectral-temporal metrics generated from corrected imagery, resulted in significantly (p ≤ 0.05) higher classification accuracies and better forest classifications, especially for the mixed forests. Adding terrain information reduced classification error significantly, but not as much as topographic correction. In summary, topographic correction remains necessary, even when analyzing a full Landsat time series and including a digital elevation model in the classification. We recommend that topographic correction should be applied when analyzing Landsat satellite imagery in mountainous region for forest cover classification.

Atmospheric correction↗