Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flux analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Analysis of a tau neutrino origin for the near-horizon air shower events observed by the fourth flight of the Antarctic Impulsive Transient Antenna

In this work, we study in detail the sensitivity of the Antarctic Impulsive Transient Antenna (ANITA) to possible ν τ point source fluxes detected via τ-lepton-induced air showers. This investigation is framed around the observation of four upward-going extensive air shower events very close to the horizon seen in ANITA-IV. We find that these four upgoing events are not observationally inconsistent with τ-induced EASs from Earth-skimming ν τ both in their spectral properties as well as in their observed locations on the sky. These four events as well as the overall diffuse and point source exposure to Earth-skimming ν τ are also compared against published ultrahigh-energy neutrino limits from the Pierre Auger Observatory. While none of these four events occurred at sky locations simultaneously visible by Auger, the implied fluence necessary for ANITA to observe these events is in strong tension with limits set by Auger across a wide range of energies and is additionally in tension with ANITA’s Askaryan in-ice neutrino channel above 10 19 eV. We conclude by discussing some of the technical challenges with simulating and analyzing these near horizon events and the potential for future observatories to observe similar events.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Effect of soot concentration on radiative transport in a 2 m JP-8 pool fire

Hubbard et al. (2024) investigated conjugate heat transfer in a 7.9 m JP-8 pool fire, utilizing both heavily sooting and non-sooting fuel models. Their findings indicated that all models produced pool radiative heat fluxes within the measurement uncertainty for large-scale outdoor experiments. This study aims to further investigate the influence of soot concentration on radiative transport. To this end, Large Eddy Simulations (LES) of a 2 m diameter JP-8 pool fire were conducted, employing four turbulent combustion chemistry models: the Eddy Dissipation Concept (EDC) and three variants of flamelet model. Additionally, three variations of the one-equation subgrid scale turbulence kinetic energy model, and multiple mesh resolutions were utilized. The primary validation metrics were pool radiative heat flux and plume radiative fraction, with simulation data compared to experimental results published by Blanchat et al. (2010). The EDC model produced high soot concentrations near the pool surface, resulting in a significant shielding effect. In contrast, the flamelet combustion model has different kinetic limiters for soot production, leading to soot formation higher in the flame, where it can be more readily oxidized. Flamelet models incorporating both acetylene and benzene contributions to soot growth demonstrated better agreement with experimental data. To assess the sensitivity of pool radiative heat flux to soot mass concentration, we used a one-dimensional approximation over a wide range of soot concentrations and compared it to three-dimensional solutions obtained using Discrete Ordinates. Furthermore, this analysis illustrates the impacts of soot shielding and Turbulence Radiation Interactions (TRI), with TRI emission enhancement factors predicted to be in the range of 3–5 near the edges of the plume.

Computational fluid dynamics↗
DOE OSTI2023

Novel method for accurately estimating membrane transport properties and mass transfer coefficients in reverse osmosis

Here, we present a simple and robust method to simultaneously characterize the water and salt permeability (A, B) of reverse osmosis (RO) membranes and mass transfer coefficient (k) in membrane modules. The proposed methodology comprises a set of RO experiments performed at different operating pressures or stages. The measured water and salt fluxes in each stage are simultaneously fitted to the RO transport equations by performing a non-linear regression, using A, B, and k as regression parameters. We first perform a systematic accuracy analysis of the proposed method across the full operational range of RO. The assessment shows that the method accuracy is substantially higher than current methods and increases with number of experimental stages and driving forces. This assessment is used to inform the design of an experimental protocol that minimizes errors in estimated A, B, and k. We then evaluate two commercial RO membranes following the new protocol. For both membranes, A and B parameters decrease by 17% and 15% from the dilute solution to seawater concentrations, whereas the k parameter remains constant. Our study demonstrates that the proposed method, informed by data-driven experimental designs, provides a new approach for accurately characterizing transport phenomenon in membrane processes with feeds of less than 100 g/L total dissolved solids.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Exploring the interfacial structure and crystallinity for direct growth of Mn 3 Sn(0001) on sapphire (0001) by molecular beam epitaxy

The Kagome antiferromagnet Mn 3 Sn has garnered a lot of attention due to the presence of interesting properties such as anomalous Hall effects and Nernst effects. Until now, few papers have been reported to grow using molecular beam epitaxy with a buffer layer or on other substrates. In this paper, we discuss the synthesis of crystalline Mn 3 Sn layers, prepared on Al 2 O 3 (0001) without a buffer layer using molecular beam epitaxy. The growth is monitored in-situ using reflection high energy electron diffraction and measured ex-situ using X-ray diffraction, Rutherford back-scattering, and cross-sectional scanning transmission electron microscopy. The samples were deposited at 524 ± 5 °C, with an Mn: Sn atomic flux ratio of 3.2:1 for 90 minutes. Orientation relationships between the Mn 3 Sn films and the sapphire substrates are determined from in-plane and out-of-plane measurements. Our analysis indicates that the resulting film is predominantly c−plane oriented. Lastly, the samples prepared in this way were found to be discontiguous, showing a 3-dimensional morphology. According to first-principles calculations, the Mn 3 Sn exhibits a displaced Kagome structure in the very first stages of growth, for 2ML and 4ML growth on Al 2 O 3 (0001). This result is corroborated by calculating the surface formation energies and explains the observed RHEED patterns.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

The Chandra view of the relation between X-ray and UV emission in quasars

Here, we present a study of the relation between X-rays and ultraviolet emission in quasars for a sample of broad-line, radio-quiet objects obtained from the cross-match of the Sloan Digital Sky Survey DR14 with the latest Chandra Source Catalog 2.0 (2332 quasars) and the Chandra COSMOS Legacy survey (273 quasars). The non-linear relation between the ultraviolet (at 2500 Å, L UV ) and the X-ray (at 2 keV, L X ) emission in quasars has been proved to be characterised by a smaller intrinsic dispersion than the observed one, as long as a homogeneous selection, aimed at preventing the inclusion of contaminants in the sample, is fulfilled. By leveraging on the low background of Chandra, we performed a complete spectral analysis of all the data available for the SDSS-CSC2.0 quasar sample (i.e. 3430 X-ray observations), with the main goal of reducing the uncertainties on the source properties (e.g. flux, spectral slope). We analysed whether any evolution of the L X – L UV relation exists by dividing the sample in narrow redshift intervals across the redshift range spanned by our sample, z ≃ 0.5–4. We find that the slope of the relation does not evolve with redshift and it is consistent with the literature value of 0.6 over the explored redshift range, implying that the mechanism underlying the coupling of the accretion disc and hot corona is the same at the different cosmic epochs. We also find that the dispersion decreases when examining the highest redshifts, where only pointed observations are available. These results further confirm that quasars are ‘standardisable candles’, that is we can reliably measure cosmological distances at high redshifts where very few cosmological probes are available.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The effects of multispecies Hohlraum walls on stimulated Brillouin scattering, Hohlraum dynamics, and beam propagation

We report experiments and simulations have been conducted to investigate the efficacy of Ta 2 O 5 -lined Hohlraum walls at reducing stimulated Brillouin backscattering (SBS) as well as any subsequent effects on the Hohlraum dynamics and capsule implosions in indirect drive experiments at the National Ignition Facility. Using a 1.1 MJ 400 TW, 351 nm, shaped laser pulse, we measure a 5× reduction in SBS power in the peak of the pulse from the wall on the outer 50° cone beams. The SBS spectrum indicates a reduction in the high-Z spectral signature when using multispecies wall materials. Detailed hydrodynamic simulations were performed using different heat conduction models with flux limiters. Additional simulations were performed on the plasma maps using the 3D parallel paraxial code pF3D to compare backscatter powers between the pure Au and Ta 2 O 5 -lined Hohlraums. Further analysis, using hydrodynamically equivalent plasmas, shows that the SBS reduction is clearly a result of the added ion Landau damping caused by the oxygen ions and not from differences in plasma conditions. The experimental and simulation results also show an increase in the wall plasma expansion when using the Ta 2 O 5 liner leading to a 70% more oblate implosion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

On discriminating tokamak sawtooth crash models via localized density and temperature measurements

The core electron temperature drops rapidly during the sawtooth crash in tokamak plasmas, which causes heat loss and may lead to fast particle losses or even a disruption. Several models have been proposed for the periodic crash, including the Kadomtsev model with magnetic reconnection and the quasi-interchange model with the growth of higher-mode-number pressure-driven instabilities. 3D MHD simulations were performed for these two models with a goal to develop intuition and to predict qualitatively how different types of sawtooth will appear in various diagnostics. The structures of electron density ne and electron temperature Te show a dominant (1, 1) mode for the Kadomtsev case and a dominant (4, 4) mode for the quasi-interchange case. The oscillations of ne and Te have a positive correlation near the inversion layer for both cases, while their frequencies and amplitudes are different depending on the dominant modes. Particularly, for the Kadomtsev case, we find a relation between the amount of flux reconnected during a sawtooth event and ne or Te oscillations. Therefore, we connect recently developed measurement capabilities for ne and Te to the internal sawtooth behavior. We propose that this method of analysis can help in identifying the type of sawtooth in future experiments augmented by simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Probing the PeV region in the astrophysical neutrino spectrum using 𝜈 𝜇 from the Southern sky

IceCube has observed a diffuse astrophysical neutrino flux over the energy region from a few TeV to a few PeV. At PeV energies, the spectral shape is not yet well measured due to the low statistics of the data. This analysis probes the gap between 1 and 10 PeV by using high-energy downgoing muon neutrinos. Here, to reject the large atmospheric muon background, two complementary techniques are combined. The first technique selects events with high stochasticity to reject atmospheric muon bundles whose stochastic energy losses are smoothed due to high muon multiplicity. The second technique vetoes atmospheric muons with the IceTop surface array. Using 9 yrs of data, we found two neutrino candidate events in the signal region, consistent with expectation from background, each with relatively high signal probabilities. A joint maximum likelihood estimation is performed using this sample and an independent 9.5-yr sample of tracks to measure the neutrino spectrum. A likelihood ratio test is done to compare the single power-law (SPL) vs SPL+cutoff hypothesis; the SPL+cutoff model is not significantly better than the SPL. High-energy astrophysical objects from four source catalogs are also checked around the direction of the two events. No significant coincidence was found.

Abbasi, R. [Loyola University Chicago] (ORCID:0000↗
DOE OSTI2024

Causal and stable first-order chiral hydrodynamics

We derive the set of inequalities that is necessary and sufficient for nonlinear causality and linear stability of first-order relativistic hydrodynamics with either a U ( 1 ) V conserved current or a U ( 1 ) A current with a chiral anomaly or both. Our results apply to generic hydrodynamic frames in which no relations among the transport parameters are imposed. Furthermore, our analysis yields, to the best of our knowledge, the first theory of viscous chiral hydrodynamics proven to be causal and stable. We find that causality demands the absence of vorticity-induced heat flux, forcing a departure from the thermodynamic frame in the chiral case. The inequalities for causality and stability define a hypervolume in the space of transport parameters, wherein each point corresponds to a consistent formulation. Notably, causality is determined by just three combinations of transport parameters. We present our results in a form amenable to numerical hydrodynamic simulations. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2022

Training data selection for event classification in a highly variable environment

A problem of interest for nuclear nonproliferation is monitoring activities at nuclear facilities, where proliferation events may only take place a few times and often under variable conditions. Machine learning has revolutionized data analytics by enabling the use of measurable signatures to generate predictive models of facility operations. However, traditional methods for training these models require large, reliable data sets with labeled observations, a challenge for nonproliferation. Highly variable conditions further complicate this as events from training data may have occurred in conditions quite different from the event of interest. Our hypothesis is that when events occur in a highly variable environment, careful training data selection for each test event could outperform the standard approach of using all available training data. We developed a method to optimize training data selection for the given test event and applied it to predicting the power level of the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory. In this study, the reactor startup exhibits variability between occurrences due to natural variability in environmental conditions and operational procedures. Using a combination of analysis techniques, a similitude assessment was performed on data collected from HFIR to isolate clusters that were optimal for training a predictive model. Concepts such as dynamic time warping and Jaccard similarity were used in conjunction with clustering analysis. In order to validate this approach, the model was trained on every combination of unique training events and the predictive performance was compared to the performance using a subset of the training data selected by isolated clusters found through the similitude assessment.

Iyer, A↗
DOE OSTI2026

Enhancing weak lensing redshift distribution characterization by optimizing the Dark Energy Survey Self-Organizing Map Photo-z method

Characterization of the redshift distribution of ensembles of galaxies is pivotal for large scale structure cosmological studies. In this work, we focus on improving the Self-Organizing Map (SOM) methodology for photometric redshift estimation (SOMPZ), specifically in anticipation of the Dark Energy Survey Year 6 (DES Y6) data. This data set, featuring deeper and fainter galaxies than DES Year 3 (DES Y3), demands adapted techniques to ensure accurate recovery of the underlying redshift distribution. We investigate three strategies for enhancing the existing SOM-based approach used in DES Y3: 1) Replacing the Y3 SOM algorithm with one tailored for redshift estimation challenges; 2) Incorporating $\textit{g}$-band flux information to refine redshift estimates (i.e. using $\textit{griz}$ fluxes as opposed to only $\textit{riz}$); 3) Augmenting redshift data for galaxies where available. These methods are applied to DES Y3 data, and results are compared to the Y3 fiducial ones. Our analysis indicates significant improvements with the first two strategies, notably reducing the overlap between redshift bins. By combining strategies 1 and 2, we have successfully managed to reduce redshift bin overlap in DES Y3 by up to 66$\%$. Conversely, the third strategy, involving the addition of redshift data for selected galaxies as an additional feature in the method, yields inferior results and is abandoned. Our findings contribute to the advancement of weak lensing redshift characterization and lay the groundwork for better redshift characterization in DES Year 6 and future stage IV surveys, like the Rubin Observatory.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Photometry on Structured Backgrounds: Local Pixel-wise Infilling by Regression

Photometric pipelines struggle to estimate both the flux and flux uncertainty for stars in the presence of structured backgrounds such as filaments or clouds. However, it is exactly stars in these complex regions that are critical to understanding star formation and the structure of the interstellar medium. We develop a method, similar to Gaussian process regression, which we term local pixel-wise infilling (LPI). Using a local covariance estimate, we predict the background behind each star and the uncertainty of that prediction in order to improve estimates of flux and flux uncertainty. We show the validity of our model on synthetic data and real dust fields. We further demonstrate that the method is stable even in the crowded field limit. While we focus on optical-IR photometry, this method is not restricted to those wavelengths. We apply this technique to the 34 billion detections in the second data release of the Dark Energy Camera Plane Survey. In addition to removing many >3σ outliers and improving uncertainty estimates by a factor of ~2–3 on nebulous fields, we also show that our method is well behaved on uncrowded fields. The entirely post-processing nature of our implementation of LPI photometry allows it to easily improve the flux and flux uncertainty estimates of past as well as future surveys.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Improving the estimate of higher-order moments from lidar observations near the top of the convective boundary layer

Abstract. Ground-based lidar data have proven extremely useful for profiling the convective boundary layer (CBL). Many groups have derived higher-order moments (e.g., variance, skewness, fluxes) from high-temporal-resolution lidar data using an autocovariance approach. However, these analyses are highly uncertain near the CBL top when the depth of the CBL (zi) is changing during the analysis period. This is because the autocovariance approach is usually applied to constant height levels and the character of the eddies is changing on either side of the changing CBL top. Here, a new approach is presented wherein the autocovariance analysis is performed on a normalized height grid, with a temporally smoothed zi. Output from a large eddy simulation model demonstrates that deriving higher-order moments from time series on a normalized height grid has better agreement with the slab-averaged quantities than the moments derived from the original height grid.

Rosenberger, Tessa E. (ORCID:0000000333205873)↗
DOE OSTI2021

Integration of proteomics and metabolomics into the Design, Build, Test, Learn cycle to improve 3-hydroxypropionic acid production in Aspergillus pseudoterreus

Biological engineering of microorganisms to produce value-added chemicals is a promising route to sustainable manufacturing. However, overproduction of metabolic intermediates at high titer, rate, and yield from inexpensive substrates is challenging in non-model systems where limited information is available regarding metabolic flux and its control in production conditions. Integrated multi-omic analyses of engineered strains offers an in-depth look at metabolites and proteins directly involved in growth and production of target and non-target bioproducts. Here we applied multi-omic analyses to overproduction of the polymer precursor 3-hydroxypropionic acid (3HP) in the filamentous fungus Aspergillus pseudoterreus. A synthetic pathway consisting of aspartate decarboxylase, beta-alanine pyruvate transaminase, and 3HP dehydrogenase was designed and built for A. pseudoterreus. Strains with single- and multi-copy integration events were isolated and multi-omics analysis consisting of intracellular and extracellular metabolomics and targeted and global proteomics was used to interrogate the strains in shake-flask and bioreactor conditions. Production of a variety of co-products (organic acids and glycerol) and oxidative degradation of 3HP were identified as metabolic pathways competing with 3HP production. Intracellular accumulation of nitrogen as 2,4-diaminobutanoate was identified as an off-target nitrogen sink that may also limit flux through the engineered 3HP pathway. Elimination of the high-expression oxidative 3HP degradation pathway by deletion of a putative malonate semialdehyde dehydrogenase improved the yield of 3HP by 3.4× after 10 days in shake-flask culture. This is the first report of 3HP production in a filamentous fungus amenable to industrial scale biomanufacturing of organic acids at high titer and low pH.

Pomraning, Kyle R.↗
DOE OSTI2022

Preliminary Design of Reactor Cavity Cooling System for a Horizontal Compact HTGR

The Horizontal Compact High Temperature Gas Reactor (HC-HTGR) is being designed by a multi-disciplinary team of nuclear, mechanical, and structural engineers under the support of a DOE-NE Advanced Reactor Demonstration Program’s Advanced Reactor Concepts-20 (ARC-20) award. The objective of this ARC-20 project is to deliver a conceptual design for the proposed MIGHTR in 3 years and support its commercialization as a safe and low-cost HTGR. Argonne National Laboratory (Argonne) is responsible for the design and analysis of the reactor cavity cooling system (RCCS) as a safety system for passive decay heat removal of the reactor concept. This report documents the preliminary design study of the RCCS for the HC-HTGR. It includes the establishment of the design requirements, a high-level design study by initial scoping calculations, and preliminary performance calculations of the HC-HTGR RCCS design. Design requirements for the HC-HTGR RCCS have been established to guide preliminary design activities and scoping performance calculations. Initial scoping calculations including estimation of the water inventory, estimation of HVAC thermal capability, and a parametric study on loop dimensions by standalone RCCS analysis. Based on scoping calculation results, a set of baseline dimensions of the HC-HTGR RCCS was derived. A water panel modeling approach was investigated to explore various potential design options for the water panel under consideration for the HC-HTGR RCCS using RELAP5-3D. A test case study was performed to assess the prediction capability of two modeling approaches. The results were compared with CFD simulations conducted in constant RPV temperature and heat flux boundary conditions. It confirms the capability of the RELAP5-3D modeling approach to include all important heat transfer mechanisms expected in the HC-HTGR RCCS operation conditions. Then, a reference RELAP5-3D model for the 1/8 th of a compartment of the preliminary design of the HC-HTGR RCCS was developed. A preliminary performance analysis was conducted to evaluate single-phase natural circulation performance with different top tank temperature values and panel conduction performance in various operation conditions. From single-phase natural circulation performance analysis, the system operation mode was investigated in normal operating and limiting design conditions. It showed operation mode in a subcooled state with a proper top tank water cooling system. Parasitic heat loss by both internal air flow and RCCS was estimated, showing it satisfies maintaining below target maximum heat loss of the HC-HTGR RCCS. From the panel conduction performance analysis, two candidate materials for the riser tube such as carbon steel and stainless steel were compared in the thermal performance of HC-HTGR RCCS. From a single water panel test compared with CFD simulation results, it was confirmed that the current capability of the RELAP5-3D modeling approach for the water panel predicts the thermal conduction of two different materials of the water panel. Then, system-level thermal performance analysis was performed for 1/8 th of the compartment of the preliminary HC-HTGR RCCS design. It was first observed that the current preliminary HC-HTGR RCCS design had minimal impact on the overall thermal performance of the water panel by changing pipe material from carbon steel to stainless steel. From Argonne’s effort on the ongoing water-based NSTF testing program, several considerations other than the thermal performance point of view were addressed to be considered in selecting pipe materials.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2022

Bulk density, grain size, carbon content and isotopes, and nitrogen content of floodplain sediment along the Koyukuk River, Alaska collected in Summer 2018.

The dataset is comprised of grain size, bulk density, carbon and nitrogen content, stable carbon isotopes, and radiocarbon content of soils sampled on the floodplain of the Koyukuk River near Huslia, AK. This dataset was collected to characterize sediment properties and floodplain organic carbon stocks in the discontinuous permafrost floodplain of the Koyukuk River. The data help quantify the flux and storage of sediment and carbon between the Koyukuk River and the surrounding floodplain as the river migrates laterally. The samples were collected in June 27 - July 9, 2018. The soil samples come from a total of 24 locations and were sampled in the upper 490 cm of the river cutbanks, point bars, and floodplain. Samples were analyzed for bulk density, full particle size distribution, nitrogen content and carbon content and isotopes, though not all samples were included in each analysis. An additional 10 samples of floodplain woody debris were measured for radiocarbon content. Data, detailed methods, analyses, and interpretations were previously published at: Douglas, M. M., Lingappa, U. F., Lamb, M. P., Rowland, J. C., West, A. J., Li, G., et al. (2021). Impact of river channel lateral migration on microbial communities across a discontinuous permafrost floodplain. Applied and Environmental Microbiology, 87(20), AEM.01339-21. https://doi.org/10.1128/AEM.01339-21 Douglas, M. M., Li, G. K., Fischer, W. W., Rowland, J. C., Kemeny, P. C., West, A. J., et al. (2022). Organic carbon burial by river meandering partially offsets bank erosion carbon fluxes in a discontinuous permafrost floodplain. Earth Surface Dynamics, 10(3), 421–435. https://doi.org/10.5194/esurf-10-421-2022 The dataset is comprised of a total of three separate data files based on the sample type and analysis, including a file that lists the sample locations, permafrost presence, and geomorphic landform.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Electromagnetic Analysis of ITER Electron Cyclotron Emission Components and Support Structures for the Preliminary Design Review

The ITER electron cyclotron emission (ECE) diagnostic system is located at Design Shield Module (DSM) 2, Equatorial Port (EP) 9 to measure electron temperature profile and electron temperature fluctuations and also to assess nonthermal electron distributions via the oblique view. Therefore, ECE has both radial and oblique views with two couples of mirrors for two different optical views. This ECE diagnostic system shall be exposed to significant power due to unabsorbed electron cyclotron heating power in the plasma. It shall also receive large electromagnetic (EM) loads up to 100 MN/m 3 force density due to the eddy currents generated by the short 16-ms transient plasma disruption. The global EM models of EP12 and EP11 with the worst case of plasma disruption Major Disruption Downward Exponential 16 ms Category III (MD_DW_EXP16MS_CATIII) have been provided by ITER. However, the support structure for these critical components, including four mirrors, is still under the design and development phase, especially during the period of preliminary design reviews (PDRs). For those small in-vessel components that are not modeled explicitly for the PDRs, we can extract the magnetic field (B) data and flux variations (dB/dt) at those locations from the global model and then use the B and dB/dt method to calculate the eddy currents, EM forces, and torques on those components in the local submodels. In conclusion, this paper will present the detailed PDR EM analysis results of the ECE components and support structures.

Electromagnetic↗
DOE OSTI2025

SOLEDGE3X full vessel plasma boundary simulations of ITER non-active phase plasmas

The onset of detachment in the ITER machine is analyzed in this work through the help of 2D-axisymmetric boundary plasma simulations with the SOLEDGE3X-EIRENE code, which features a numerical domain for the plasma solver extending up to the first wall. The plasma boundary is computed in scenarios from the first non-active phase of ITER, in pure H and at 20 MW. This set of simulations is used in two aspects: first, to study the plasma detachment in the divertor, and second, the plasma conditions, fluxes, and beryllium erosion at the first wall. Here, the code results are also compared to those obtained with the well-established SOLPS-ITER code, which includes a plasma numerical domain only covering the main SOL. Results show an increase in the SOL width λ q with increasing density, and a detailed analysis is carried out, for the first time, on each of the different plasma-neutral interactions in the code’s physics model in EIRENE. The gross beryllium erosion rates of first wall panels are estimated from 2D simulations, with the aim of assessing their sensitivity to two parameters: the divertor density regime, and the presence of density shoulders in the far-SOL formed by enhanced perpendicular transport at this location. The erosion contributions from neutrals and ions are considered in each case, and the charge-exchange atoms fluxes and energy distributions are provided, highlighting the two atom populations (cold and charge-exchange).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗