Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “field study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Aerosol backscatter variability at 10.6 microns over Colorado high plains during JAWS experiment

This paper describes the aerosol backscatter profile measurements obtained by an airborne CW focused CO2 Doppler lidar (the Laser True Airspeed System) during the 1982 Joint Airport Weather Studies (JAWS) field experiment. The backscatter sounding flights were made in the lee of the front range of the Colorado Rocky Mountains, at about 1650 m above mean sea level. The qualitative relationships between the backscatter and the vertical distribution of temperature and water vapor are described.

Rothermel, Jeffry↗

Electron acceleration by an obliquely propagating electromagnetic wave in the regime of validity of the Fokker-Planck-Kolmogorov approach

The relativistic motion of an ensemble of electrons in an intense monochromatic electromagnetic wave propagating obliquely in a uniform external magnetic field is studied. The problem is formulated from the viewpoint of Hamiltonian theory and the Fokker-Planck-Kolmogorov approach analyzed by Hizanidis (1989), leading to a one-dimensional diffusive acceleration along paths of constant zeroth-order generalized Hamiltonian. For values of the wave amplitude and the propagating angle inside the analytically predicted stochastic region, the numerical results suggest that the diffusion probes proceeds in stages. In the first stage, the electrons are accelerated to relatively high energies by sampling the first few overlapping resonances one by one. During that stage, the ensemble-average square deviation of the variable involved scales quadratically with time. During the second stage, they scale linearly with time. For much longer times, deviation from linear scaling slowly sets in.

Hizanidis, Kyriakos↗

Reynolds stress development in pressure-driven three-dimensional turbulent boundary layers

The development of the Reynolds stress field was studied for flows in which an initially two-dimensional boundary layer was skewed sideways by a spanwise pressure gradient ahead of an upstream-facing wedge. Two different wedges were used, providing a variation in the boundary-layer skewing. Measurements of all components of the Reynolds stress tensor and all ten triple products were measured using a rotatable cross-wire anemometer. The results show the expected lag of the shear stress vector behind the strain rate. Comparison of the two present experiments with previous data suggests that the lag can be estimated if the radius of curvature of the free-stream streamline is known. The magnitude of the shear stress vector in the plane of the wall is seen to decrease rapidly as the boundary-layer skewing increases. The amount of decrease is apparently related to the skewing angle between the wall and the free stream. The triple products evolve rapidly and profiles in the three-dimensional boundary layer are considerably different than two-dimensional profiles, leaving little hope for gradient transport models for the Reynolds stresses. The simplified model presented by Rotta (1979) performs reasonably well providing that an appropriate value of the T-parameter is chosen.

Anderson, Shawn D.↗

ECRH of trapped electrons in laboratory magnetoplasmas

Heating of plasma electrons by high power millimeter wave fields at cyclotron harmonic resonance is studied. A mirror field is modeled for the local trapping of electrons. It is shown that superthermal electrons can be generated as the consequence of the ECRH of trapped electrons.

Kuo, S. P.↗

Soft inflation

The cosmology resulting from two coupled scalar fields was studied, one which is either a new inflation or chaotic type inflation, and the other which has an exponentially decaying potential. Such a potential may appear in the conformally transformed frame of generalized Einstein theories like the Jordan-Brans-Dicke theory. The constraints necessary for successful inflation are examined. Conventional GUT models such as SU(5) were found to be compatible with new inflation, while restrictions on the self-coupling constant are significantly loosened for chaotic inflation.

Berkin, Andrew L.↗

Soft inflation

The cosmology resulting from two coupled scalar fields was studied, one which is either a new inflation or chaotic type inflation, and the other which has an exponentially decaying potential. Such a potential may appear in the conformally transformed frame of generalized Einstein theories like the Jordan-Brans-Dicke theory. The constraints necessary for successful inflation are examined. Conventional GUT models such as SU(5) were found to be compatible with new inflation, while restrictions on the self-coupling constant are significantly loosened for chaotic inflation.

Berkin, Andrew L.↗

A statistical study of ions and magnetic fields in the Venus magnetotail

A statistical characterization is made of the combined ion and magnetic field properties of the Venus magnetosheath and magnetotail, on the basis of plasma and magnetic field data from 223 Pioneer Venus orbits; no assumptions are made as to existing regions or their plasma and field characteristics. Plasma is found to flow tailward in all locations, and the magnetotail is highly draped. Weak magnetic field asymmetries are associated with the plasma dropouts. A high-E/q plasma population, previously interpreted as planetary-pickup ions, is found asymmetrically both within the tail and in the adjacent sheath. The Venus tail is filled with plasma that is primarily shocked solar wind, at fluxes that are sometimes undetectable; the tail coexists with a photoion population which generates asymmetries in the bulk plasma and magnetic field properties.

Moore, K. R.↗

Helicopter far-field acoustic levels as a function of reduced main-rotor advancing blade-tip Mach number

During the design of a helicopter, the weight, engine, rotor speed, and rotor geometry are given significant attention when considering the specific operations for which the helicopter will be used. However, the noise radiated from the helicopter and its relationship to the design variables is currently not well modeled with only a limited set of full-scale field test data to study. In general, limited field data have shown that reduced main-rotor advancing blade-tip Mach numbers result in reduced far-field noise levels. The status of a recent helicopter noise research project is reviewed. It is designed to provide flight experimental data which may be used to further understand helicopter main-rotor advancing blade-tip Mach number effects on far-field acoustic levels. Preliminary results are presented relative to tests conducted with a Sikorsky S-76A helicopter operating with both the rotor speed and the flight speed as the control variable. The rotor speed was operated within the range of 107 to 90 percent NR at nominal forward speeds of 35, 100, and 155 knots.

Mueller, Arnold W.↗

Containerless processing projects

The primary research objective was the examination of fundamental acoustics of the Drop Physics Module. An advanced chamber system was developed for acoustics and sample characterization. Sample interaction with an acoustic field was studied. The shaping of liquid drops by acoustic forces was also examined. The acoustic torque as a function of sample position and shape was studied along with levitated sample stability and the effects of feedback systems.

Source record↗

Data analysis for the Pioneer-Venus electric field detector

Research on plasma waves observed in the ion foreshock at Venus and on the impulsive bursts observed in the nightside ionosphere was performed. Some results from the ion foreshock, wave polarization, and the dependence on magnetic field orientation studies are described. An analysis of data acquired using 4096 BPS data is also presented.

Source record↗

Fast magnetization of a high-to-low-beta plasma beam

The magnetization of a high-beta (plasma energy density/magnetic-field energy density) hydrogen-plasma beam injected into a vacuum transverse magnetic field is studied experimentally. Nominal parameters were Ti = 1 eV, Te = 5 eV, n = 3 x 10 to the 13th/cu cm or less, v(i) = 7 x 10 to the 6th cm/sec or less, t(pulse) less than 70 microsec, and Bz = 300 G or less. Plasma characteristics were measured for a wide beam and a downstream distance, x = 300 rho(i) or less, where x is the downstream distance and rho(i) is the ion gyroradius. A brief initial state of diamagnetic propagation is observed, followed by magnetized propagation accompanied by beam compression transverse to B with as much as a factor of 4 increase in density and a slight drift of the beam in the ion Lorentz force direction.

Song, J. J.↗

Wave generation by turbulent convection

Wave generation by turbulent convection in a plane parallel, stratified atmosphere lying in a gravitational field is studied. The turbulent spectrum is related to the convective energy flux via the Kolmogorov scaling and the mixing length hypothesis. Efficiencies for the conversion of the convective energy flux into both trapped and propagating waves are estimated.

Goldreich, Peter↗

Coherent CO2 lidar: A superior system for observing clouds?

Lidars have long been used to study various parameters of clouds. NOAA's Wave Propagation Laboratory has operated a coherent CO2 lidar for over a decade, using Doppler to study wind fields and turbulence, atmospheric absorption for Differential Absorption Lidar (DIAL) applications, backscatter to investigate aerosol distributions, and backscatter and extinction measurements on clouds. A system under development for our laboratory promises to overcome the older system's problems of large size, frequency instability, and need for continual operator attention. We are also thoroughly evaluating the capabilities of CO2 lidar for observing clouds, including development of some new techniques. CO2 lidar provides a view of clouds different in many ways from that of lidars at other extinction measurements from clouds. This discussion argues in support of the proposition: coherent CO2 lidar can be a superior lidar system for measuring most cloud properties.

Eberhard, Wynn L.↗

Effects of depth-variations in creep laws on the formation of plates in mantle dynamics

The influences of depth-varying rheologies on the structure of mantle convection and the near surface flow fields are studied. Upwelling flows crossing the upper-lower mantle boundary become considerably thinner and faster. Streamlines are concentrated near the surface and other platelike characteristics are enhanced by this type of rheological stratification in which the averaged effective viscosity of the upper mantle is about two orders of magnitude lower than that of the lower mantle. The presence of a lithosphere with a higher nonlinear dependence in the flow law further promotes platelike behavior. Platelike character of the top boundary-layer is encouraged by a decreasing depth-dependent viscosity in the non-Newtonian upper-mantle and by greater convective vigor.

Van Den Berg, Arie P.↗

Effects of nose bluntness and angle of attack on slender bodies in hypersonic flows

The effects of angle of attack and nose bluntness on the flow field and wall quantities are investigated for hypersonic flows of air over slender bodies. The bodies considered are slender cones and straight biconic configurations. The numerical procedures used are based on the solution of complete Navier-Stokes equations in the nose region and parabolized Navier-Stokes equations in the downstream region. Results are obtained for a wide range of free stream conditions in which the gas behind the shock is treated as perfect. The flow field variables and surface quantities show significant differences when the angle of attack and nose bluntness are varied. The postshock flow field is studied in detail from the contour plots of Mach number, density, and temperature. Flow separation is observed on the leeward plane for an on-axis, 12.84 deg/7 deg (fore-cone and aft-cone angles) biconic geometry at 12 deg angle of attack. Also, the windward and leeward heating rates for the fore-cone section decrease by a factor of four and five, respectively, when the nose bluntness is increased by an order of magnitude. The effect of nose bluntness for slender cone persists as far as 200 nose radii downstream.

Tiwari, S. N.↗

IMF draping around the geotail - IMP 8 observations

The draping pattern for the full range of IMF directions is mapped in the GSM yz-plane using a large data set for studying magnetic field draping around the tail. Based on the maps, it is concluded that the dominant pattern is draping as found by Ohtani and Kokubun (1991) and Sanchez and Siscoe (1990). A new finding is that the draping pattern is rotated relative to the plane formed by the IMF and the aberrated x-axis, with the degree of rotation varying from zero for strongly northward and southward IMF to a peak of 17 deg for moderately southward IMF. It is also found that the tail radius is bigger for southward IMF than for northward IMF.

Kaymaz, Zerefsan↗

Mars Observer magnetic fields investigation

The magnetic fields experiment designed for the Mars Observer mission will provide definitive measurements of the Martian magnetic field from the transition and mapping orbits planned for the Mars Observer. The paper describes the instruments (which include a classical magnetometer and an electron reflection magnetometer) and techniques designed to investigate the nature of the Martian magnetic field and the Mars-solar wind interaction, the mapping of crustal magnetic fields, and studies of the Martian ionosphere, which are activities included in the Mars Observer mission objectives. Attention is also given to the flight software incorporated in the on-board data processor, and the procedures of data processing and analysis.

Acuna, M. H.↗

Halo common proper motion stars - Subdwarf distance scale, halo binary fraction, and UBVRI colors

Common proper motion stars identified by Luyten (1979, 1980) were selected according to reduced proper motion and photometric criteria to produce a list of candidate halo objects. UBVRI photometry was obtained to identify genuine halo parts. About 20 percent of the stars with (Fe/H) less than -1.0 were found to have random errors not less than several x 0.1 mag in distance modulus, in addition to the photometric errors, thought to be due to the existence of close binary companions to some of the common proper motion stars. The implications of these errors for kinematic studies of field Population II stars are considered. Systematic errors of order 16 percent were also detected in distances derived from the U-B,B-V deblanketing technique. It is suggested that Population II field stars did not originate in globular clusters which subsequently disintegrated but formed in less dense environments. Several K subdwarfs were found with very high UV excesses, comparable with those predicted by some synthetic colors.

Ryan, Sean G.↗