Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Eliminating chemo-mechanical degradation of lithium solid-state battery cathodes during >4.5 V cycling using amorphous Nb2O5 coatings

Abstract Lithium solid-state batteries offer improved safety and energy density. However, the limited stability of solid electrolytes (SEs), as well as irreversible structural and chemical changes in the cathode active material, can result in inferior electrochemical performance, particularly during high-voltage cycling (>4.3 V vs Li/Li + ). Therefore, new materials and strategies are needed to stabilize the cathode/SE interface and preserve the cathode material structure during high-voltage cycling. Here, we introduce a thin (~5 nm) conformal coating of amorphous Nb 2 O 5 on single-crystal LiNi 0.5 Mn 0.3 Co 0.2 O 2 cathode particles using rotary-bed atomic layer deposition (ALD). Full cells with Li 4 Ti 5 O 12 anodes and Nb 2 O 5 -coated cathodes demonstrate a higher initial Coulombic efficiency of 91.6% ± 0.5% compared to 82.2% ± 0.3% for the uncoated samples, along with improved rate capability (10x higher accessible capacity at 2C rate) and remarkable capacity retention during extended cycling (99.4% after 500 cycles at 4.7 V vs Li/Li + ). These improvements are associated with reduced cell polarization and interfacial impedance for the coated samples. Post-cycling electron microscopy analysis reveals that the Nb 2 O 5 coating remains intact and prevents the formation of spinel and rock-salt phases, which eliminates intra-particle cracking of the single-crystal cathode material. These findings demonstrate a potential pathway towards stable and high-performance solid-state batteries during high-voltage operation.

Science & Technology - Other Topics↗

Insights into the mechanisms of NH3 inhibition on Cu-CHA SCR catalysts

This work elucidates the atomic-scale mechanism behind ammonia (NH3) inhibition during the selective catalytic reduction (SCR) of NO? on Cu-CHA catalysts, a key issue limiting low-temperature emission control. Using SCR kinetic analysis, operando electron paramagnetic resonance (EPR) spectroscopy, and density functional theory (DFT), we demonstrate that NH3 inhibition primarily slows the oxidation half-cycle (OHC), while the reduction half-cycle (RHC) remains unaffected. DFT simulations reveal that excess NH3 substantially increases the diffusion barrier for CuI ions, hindering formation of essential CuII-oxo dimer intermediates and thus suppressing OHC kinetics. Operando EPR studies confirm that this inhibition strongly depends on operating temperature and catalyst Cu loading. Our findings highlight strategies to counteract NH3 inhibition, including optimizing Cu loading, precisely managing NH3:NO feed ratios, and enhancing CuI ion mobility through tailored catalyst design and operational adjustments, thereby advancing the efficiency of emission control technologies in automotive applications.

Deka, Dhruba Jyoti↗

Complete miscibility of immiscible elements at the nanometre scale

Understanding the mixing behaviour of elements in a multielement material is important to control its structure and property. When the size of a multielement material is decreased to the nanoscale, the miscibility of elements in the nanomaterial often changes from its bulk counterpart. However, there is a lack of comprehensive and quantitative experimental insight into this process. Here, in this study, we explored how the miscibility of Au and Rh evolves in nanoparticles of sizes varying from 4 to 1 nm and composition changing from 15% Au to 85% Au. We found that the two immiscible elements exhibit a phase-separation-to-alloy transition in nanoparticles with decreased size and become completely miscible in sub-2 nm particles across the entire compositional range. Quantitative electron microscopy analysis and theoretical calculations were used to show that the observed immiscibility-to-miscibility transition is dictated by particle size, composition and possible surface adsorbates present under the synthesis conditions.

36 MATERIALS SCIENCE↗

Probing high-momentum protons and neutrons in neutron-rich nuclei

The atomic nucleus is one of the densest and most complex quantum-mechanical systems in nature. Nuclei account for nearly all the mass of the visible Universe. The properties of individual nucleons (protons and neutrons) in nuclei can be probed by scattering a high-energy particle from the nucleus and detecting this particle after it scatters, often also detecting an additional knocked-out proton. Analysis of electron- and proton-scattering experiments suggests that some nucleons in nuclei form close-proximity neutron–proton pairs with high nucleon momentum, greater than the nuclear Fermi momentum. However, how excess neutrons in neutron-rich nuclei form such close-proximity pairs remains unclear. In this study we measure protons and, for the first time, neutrons knocked out of medium-to-heavy nuclei by high-energy electrons and show that the fraction of high-momentum protons increases markedly with the neutron excess in the nucleus, whereas the fraction of high-momentum neutrons decreases slightly. This effect is surprising because in the classical nuclear shell model, protons and neutrons obey Fermi statistics, have little correlation and mostly fill independent energy shells. These high-momentum nucleons in neutron-rich nuclei are important for understanding nuclear parton distribution functions (the partial momentum distribution of the constituents of the nucleon) and changes in the quark distributions of nucleons bound in nuclei (the EMC effect). They are also relevant for the interpretation of neutrino-oscillation measurements and understanding of neutron-rich systems such as neutron stars.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Conversion of Syngas-Derived C2+ Mixed Oxygenates to C3-C5 Olefins over ZnxZryOz Mixed Oxides Catalysts

In this study we report on a ZnxZryOz mixed oxide type catalyst capable of converting a syngas-derived C2+ mixed oxygenate feedstock to isobutene-rich olefins. Aqueous model feed comprising of ethanol, acetaldehyde, acetic acid, ethyl acetate, methanol, and propanol was used as representative liquid product derived from a Rh-based mixed oxygenate synthesis catalyst. Greater than 50% carbon yield to C3-C5 mixed olefins was demonstrated when operating at 400-450oC and 1 atm. In order to rationalize formation of the products observed feed components were individually evaluated. Major constituents of the feed mixture (ethanol, acetaldehyde, acetic acid, and ethyl acetate) were found to produce isobutene-rich olefins. C-C coupling was also demonstrated for propanol feedstock - a minor constituent of the mixed oxygenate feed - producing branched C6 olefins, revealing scalability to alcohols higher than ethanol following an analogous reaction pathway. Using ethanol and propanol feed mixtures, cross-coupling reactions produced mixtures of C4, C5, and C6 branched olefins. The presence of H2 in the feed was found to facilitate hydrogenation of the ketone intermediates, thus producing straight chain olefins as byproducts. While activity loss from coking is observed complete catalyst regeneration is achieved by employing mild oxidation. For conversion of the mixed oxygenate feed a Zr/Zn ratio of 2.5 and a reaction temperature of 450oC provides the best balance of stability, activity, and selectivity. X-ray diffraction and scanning transmission electron microscopy analysis reveals the presence of primarily cubic phase ZrO2 and a minor amount of the monoclinic phase, with ZnO being highly dispersed in the lattice. The presence of ZnO appears to stabilize the cubic phase resulting in less monoclinic phase as the ZnO concentration increases. Infrared spectroscopy shows the mixed oxide acid sites are characterized as primarily Lewis type acidity. The direct relationship between isobutene production and the ratio of basic/acidic sites was demonstrated. An optimized balance of active sites for isobutene production from acetone was obtained with a basic/acidic site ratio of ~2. This technology for the conversion of aqueous mixtures of C2+ mixed oxygenates provides significant advantages over other presently studied catalysts in that its unique properties permit the utilization of a variety of feeds in a consistently selective manner.

biomass, catalyst, mixed oxides, ethanol, acetic a↗

Low-temperature activation of methane on doped single atoms: descriptor and prediction

Catalytic transformation of methane under mild conditions remains a grand challenge. Fundamental understanding of C–H activation of methane is crucial for designing a catalyst for the utilization of methane at low temperature. Recent experiments show that strong methane chemisorption on oxides of precious metals leads to facile C–H activation. However, only a very few such oxides are capable (for example, IrO 2 and PdO). Here we show for the first time that strong methane chemisorption and facile C–H activation can be accomplished by single transition-metal atoms on TiO 2 , some of which are even better than IrO 2 . Using methane adsorption energy as a descriptor, we screened over 30 transition-metal single atoms doped on TiO 2 for the chemisorption of methane by replacing a surface Ti atom with a single atom of another transition metal. It is found that the adsorption energies of methane on a single atom of Pd, Rh, Os, Ir, and Pt doped on rutile TiO 2 (110) are greater than or similar to those on rutile IrO 2 (110), a benchmark for the chemisorption of methane on transition oxides. Electronic structure analysis uncovered orbital overlap and mixing between methane and the single atom, as well as significant localization of the charge between the molecule and the surface, demonstrating chemical bonding of CH 4 to doped single atoms. Facile C–H dissociation has been found on the single-atom sites with the transition state energies lower than desorption energies. We report our computational studies predict that Pd, Rh, Os, Ir, and Pt single atoms on rutile TiO 2 (110) can activate C–H of methane at a temperature lower than 25 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stability and metallization of solid oxygen at high pressure

The phase diagram of oxygen is investigated for pressures from 50 to 130 GPa and temperatures up to 1200 K using first-principles theory. A metallic molecular structure with the P6 3 /mmc symmetry (η' phase) is determined to be thermodynamically stable in this pressure range at elevated temperatures above the ε(O 8 ) phase. Crucial for obtaining this result is the inclusion of anharmonic lattice dynamics effects and accurate calculations of exchange interactions in the presence of thermal disorder. Overall, we present analysis of electronic, structural, and thermodynamic properties of solid oxygen at 0 K and finite temperature with hybrid exchange functionals, including a comparison with available experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sol–gel based synthesis and enhanced processability of MAX phase Cr 2 GaC

MAX phases are typically prepared by high-temperature (oftentimes high-pressure) solid-state methods. In this paper, we report a new wet chemistry based synthesis technique starting from an aqueous solution of metal nitrates and citric acid to prepare MAX phase Cr 2 GaC. This solution-processable precursor mixture has the potential to be easily scaled, painted, printed or fabricated onto supports – an advantage that is demonstrated by the formation of hollow carbon microspheres which are decorated with Cr 2 GaC particles. A small amount of chromium carbide and oxide remains in the product, however, the amount of the latter can be reduced by a larger excess in citric acid in the precursor gel. The transformation mechanism of the initial amorphous gel into highly crystalline and anisotropic MAX phase particles is investigated by detailed thermal analysis. Transmission electron microscopy studies are conducted to elucidate the microstructure of the sol–gel-prepared particles as well as the decorated hollow microspheres. From magnetic susceptibility measurements, the density of states at the Fermi level is deduced reflecting the quality of the Pauli paramagnet Cr 2 GaC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis and visualization of energy densities. I. Insights from real-time time-dependent density functional theory simulations

In this article, we report a scheme to analyze and visualize the energy density fluctuations during the real-time time-dependent density functional theory (RT-TDDFT) simulations. Using Ag 4 –N 2 complexes as examples, here we show that the grid-based Kohn–Sham energy density can be computed at each time step using a procedure from Nakai and coworkers. Then the instantaneous energy of each molecular fragment (such as Ag 4 and N 2 ) can be obtained by partitioning the Kohn–Sham energy densities using Becke or fragment-based Hirshfeld (FBH) scheme. A strong orientation-dependence is observed for the energy flow between the Ag 4 cluster and a nearby N 2 molecule in the RT-TDDFT simulations. Future applications of such an energy density analysis in electron dynamics simulations are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bridging the thermodynamics and kinetics of temperature-induced morphology evolution in polymer/fullerene organic solar cell bulk heterojunction

The performance of organic solar cells (OSC) critically depends on the morphology of the active layer. After deposition, the active layer is in a metastable state and prone to changes that lead to cell degradation. Here, a high efficiency fullerene:polymer blend is used as a model system to follow the temperature-induced morphology evolution through a series of thermal annealing treatments. Electron microscopy analysis of the nano-scale phase evolution during the early stages of thermal annealing revealed that spinodal decomposition, i.e. spontaneous phase separation with no nucleation stage, is possibly responsible for the formation of a fine scale bicontinuous structure. In the later evolution stages, large polycrystalline fullerene aggregates are formed. Optical microscopy and scattering revealed that aggregate-growth follows the Johnson–Mehl–Avrami–Kolmogorov equation indicating a heterogeneous transformation process, i.e., through nucleation and growth. These two mechanisms, spinodal decomposition vs. nucleation and growth, are mutually exclusive and their co-existence is surprising. This unexpected observation is resolved by introducing a metastable monotectic phase diagram and showing that the morphology evolution goes through two distinct and consecutive transformation processes where spinodal decomposition of the amorphous donor:acceptor blend is followed by nucleation and growth of crystalline acceptor aggregates. Lastly, this unified thermodynamic and kinetic mechanism allows us to correlate the morphology evolution with OSC degradation during thermal annealing.

36 MATERIALS SCIENCE↗

Alkali-induced catalytic tuning at metal and metal oxide interfaces

Alkali metals have been recognized as effective promoters in heterogeneous catalysis, capable of enhancing catalytic activity and tuning product distributions. Over the past few decades, significant efforts have been made aiming to reveal the mechanisms underlying the promoting effect of alkalis. However, the roles that alkali metals play in the catalytic process remain elusive due to challenges in capturing their catalytic behaviours upon exposure to reactive environments. This review summarizes recent surface science and theoretical studies of alkali (potassium, cesium)-decorated metal and metal oxide model catalysts, revealing the crucial tuning by alkalis of activity and selectivity for CO 2 hydrogenation. The analysis of electronic structures identifies the selective binding mechanism of the positively charged alkali ions on the surface, being able to reduce the surface work function and lead to strong electron polarization on the surfaces. Depending on the alkali–support interaction, the deposition of alkalis can selectively modify the bindings of reaction intermediates involved in CO 2 hydrogenation via the interplay among the ionic, covalent and electrostatic tunings. As a result, CO 2 can be effectively activated and converted into diverse products at the alkali–support interface, ranging from formic acid to methanol and ethanol. The identified selective bond-tuning advances the application of alkalis in promoting catalytic activity and controlling catalytic selectivity at alkali–support interfaces.

03 NATURAL GAS↗

The MEG experiment: status and perspectives

The MEG experiment, a sensitive search for the mu->egamma decay, has started operating in September 2008. Analysis of data collected during the initial three months of operation is still ongoing and soon to be finalized. The detector performance during Run 2008 is reviewed, with remarks on perspectives for Run 2009.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

National Ignition Facility neutron time-of-flight measurements (invited)

The first 3 of 18 neutron time-of-flight (nTOF) channels have been installed at the National Ignition Facility (NIF). The role of these detectors includes yield, temperature, and bang time measurements. This article focuses on nTOF data analysis and quality of results obtained for the first set of experiments to use all 192 NIF beams. Targets produced up to 2x10{sup 10} 2.45 MeV neutrons for initial testing of the nTOF detectors. Differences in neutron scattering at the OMEGA laser facility where the detectors were calibrated and at NIF result in different response functions at the two facilities. Monte Carlo modeling shows this difference. The nTOF performance on these early experiments indicates that the nTOF system with its full complement of detectors should perform well in future measurements of yield, temperature, and bang time.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Drift wave instability analysis in pair-ion-electron plasmas using kinetic approach

Drift wave is studied in pair-ion plasmas in the presence of electrons using the Vlasov-Poisson set of equations. The growth rate of this universal instability depends on the concentration of electrons. The real frequency and the growth rate are reduced as the number density of electrons decreases. If the laboratory produced pair-ion plasmas contain relatively small amount of electrons then very low frequency almost stable drift waves can be produced which will indicate that the plasma is not a pure pair-ion plasma. The present investigation can be useful for future experiments on pair-ion plasmas and low density low temperature industrial plasmas which contain negative ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Strong Pinning in Thick YBa2Cu3O7 Layers Mediated by Catalysis of a New Long-Period Metastable Cuprate Phase

Catalysts are widely utilized to promote reactions in liquid and gaseous phases but are rarely encountered in solid state synthesis. Here we use catalytically active (001) ceria buffers to modify the structure of the epitaxial high temperature superconductor YBa{sub 2}Cu{sub 3}O{sub 7}. The modification is achieved by catalytically-assisted synthesis of a previously unknown metastable phase. The new phase, a long-period (3.5 nm) perovskite, intercalates into the YBa{sub 2}Cu{sub 3}O{sub 7} matrix without negatively affecting the critical temperature of the film. Analysis of electron microscopy and synchrotron x-ray diffraction data allow identification of the phase as a long-period YBa{sub 2}Cu{sub 3}O{sub 7} derivative formed through short-range cation displacement. The 0.8 {micro}m thick films exhibit strong enhancement of the critical current density, reaching a maximum of 4.2 MA/cm{sup 2} at 77 K. The result emphasizes the critical role of catalysis for synthesis of novel complex materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Adhesion of tungsten carbide reinforced amorphous hydrocarbon thin films (WC/a-C:H) to steel substrates for tribological applications

We have explored the adhesive interlayer structure for a tungsten carbide reinforced amorphous hydrocarbon thin film coating (WC/a-C:H) that demonstrated excellent coating adhesion under highly stressed tribological contact. Transmission electron microscopy (TEM) analysis including cross-sectional imaging, electron diffraction, and energy dispersive spectroscopy was performed on abrupt and gradient interfaces within the multilayer film architecture. Interpretation of these results is aided by quantum mechanical calculations that were performed to investigate bonding interactions of the Cr adhesive interlayer to the Fe substrate surface within a - 3 nm thick interfacial region. Low levels of oxygen present in the coating deposition chamber during deposition were found at the Fe-Cr interface using high-resolution TEM. Molecular orbital calculations for a linear three-atom molecular model Fe-O-Cr demonstrate the role of O in strengthening Fe to Cr bonding within that interfacial region.

36 MATERIALS SCIENCE↗