Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elastic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Strength and elasticity of niobium under high pressure

High purity polycrystalline niobium contained in boron-epoxy gasket was compressed in a diamond anvil cell (DAC). The pressure was increased in steps of {approx}3 GPa and the diffraction patterns recorded at each pressure with the incident x-ray beam perpendicular to the load axis of the DAC (radial diffraction). The maximum pressure reached was 37.6 GPa. The compressive strength (differential stress) derived from the radial diffraction data is 0.44(1) GPa at 2.1 GPa and shows a shallow maximum at {approx}5 GPa, and then decreases to 0.35(5) at 12 GPa. At higher pressures, strength increases nearly linearly and the extrapolated value at 40 GPa is 0.94(6) GPa. At any pressure, the single-crystal elastic moduli derived from the diffraction data can be made to match well those obtained from the extrapolation of the elasticity data at ambient pressure by adjusting the weight parameter {alpha} that appears in the lattice strain theory. The parameter {alpha} is found to decrease from 2.00(8) at 2.1 GPa to 1.35(4) at 37.6 GPa.

36 MATERIALS SCIENCE↗

Results on transverse spin asymmetries in the polarized proton-proton elastic scattering in the CNI region at STAR

Elastic scattering of polarized protons at small four momentum transfer squared t is described by interference of Coulomb and nuclear amplitudes. Coulomb amplitude is well calculable by QED and such interference provides a unique opportunity to study the nuclear amplitude. At high energies this amplitude is believed to be dominated by Pomeron exchange. Measurement of asymmetries can provide evidence for contribution of other Reggeons, including hypothetical Odderon. Polarized proton collider at RHIC facility is a perfect place for such experiment.A one-week dedicated run with special beam optics in June 2009 allowed us to collect statistics of more than 30 millions of elastic triggers with transversely polarized beams in the -t range 0.005-0.035 (GeV/c){sup 2} at {radical}(s) = 200 GeV. In this paper we present preliminary results of single and double transverse spin asymmetries.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Phase Transition and Elastic Properties of La-Compounds

The Phase transition and elastic properties of La-monochalcogenides have been investigated under pressure by means of a modified charge-transfer potential model which incorporates the Coulomb interaction modified by Coulomb screening due to the delocalization of electron of rare-earth atom leading to many-body interactions, covalency effect and overlap repulsion extended up to second-nearest neighbours. Under high pressure the coordination increases and they transform from rock-salt to CsCl structure. The calculated values of cohesive energy, lattice constant, phase transition pressure, relative volume collapse and harmonic elastic moduli their agree well with the available measured data and better than those computed by earlier workers. Present model is capable of explaining the Cauchy's discrepancy correctly.

36 MATERIALS SCIENCE↗

Two Photon Exchange in Quasi-elastic and Deep-inelastic Scattering

In this paper, I present an overview and preliminary results from three experiments at Jefferson Lab that were recently completed using a {sup 3}He gas target with polarization oriented normal to the scattering plane of unpolarized incident electrons. A target single spin asymmetry was formed by periodically flipping the direction of the target spin. In the reaction {up_arrow}{sup 3}He(e,e'), the Born contribution is expected to be zero, giving direct sensitivity to two photon exchange. This asymmetry was measured in the quasi-elastic and deep-inelastic regimes with 0.1 < Q{sup 2} < 1.0 GeV{sup 2}. The asymmetry is predicted to decrease by two-orders of magnitude for deep-inelastic versus quasi-elastic scattering. Preliminary results from these experiments will be presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Elastic Properties and Structural Studies on Boro-Vanadate Glasses Containing Sulphate (SO{sub 4}{sup 2-}) Ions

Elastic properties of xLi{sub 2}SO{sub 4}-16 Li{sub 2}O-(84-x) [0.7 B{sub 2}O{sub 3}-0.3 V{sub 2}O{sub 5}] where (5{<=}x{>=}30) glasses have been prepared by melt quenching method and structural investigations were carried out using ultrasonic pulse echo overlap technique at a frequency of 10 MHz and at 300 K. The molar volume increases and the density decreases with the increase of Li{sub 2}SO{sub 4} concentration due to the incorporation of SO{sub 4}{sup 2-} ions into the modified macromolecular network. The addition of Li{sub 2}SO{sub 4} content leads to loose packing structure which is attributed to volume increasing effect and the reduction in the vibrations of borate and vanadate lattices. Increase in Li{sub 2}{sup SO}{sub 4} results in decreasing cross link density which in turn decreases elastic moduli. The results are discussed in view of its network structure. The structural groups [VOO{sub 3/2}]{sup 0} and [BO{sub 3/2}]{sup 0} modify preferentially. This preference in modification is decided by the electronegativity ({chi}) of the structural groups.

36 MATERIALS SCIENCE↗

Energy evolution of the large-t elastic scattering and its correlation with multiparticle production

It is emphasized that the collective dynamics associated with color confinement is dominating over a point-like mechanism related to a scattering of the proton constituents at the currently available values of the momentum transferred in proton elastic scattering at the LHC. Deep-elastic scattering and its role in the dissimilation of the absorptive and reflective asymptotic scattering mechanisms are discussed with emphasis on the experimental signatures associated with the multiparticle production processes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Elastic scattering measurements for {sup 7}Be+{sup 27}Al system at RIBRAS facility

Elastic scattering angular distribution measurements of {sup 7}Be+{sup 27}Al system were performed at the laboratory energy of 15.6 MeV. The {sup 7}Be secondary beam was produced by the proton transfer reaction {sup 3}He({sup 6}Li,{sup 7}Be) and impinged on {sup 27}Al and {sup 197}Au targets, using the Radioactive Ion Beam (RIB) facility, RIBRAS. The elastic angular distribution was obtained within the angular range of 15{sup 0} - 80{sup 0} at the center of mass frame. Optical model calculations have been performed using the Woods- Saxon form factors and the Sao Paulo potential to fit the experimental data. The total reaction cross section was derived.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The bonding, charge distribution, spin ordering, optical, and elastic properties of four MAX phases Cr{sub 2}AX (A = Al or Ge, X = C or N): From density functional theory study

In this work, we assess a full spectrum of properties (chemical bonding, charge distribution, spin ordering, optical, and elastic properties) of Cr{sub 2}AC (A = Al, Ge) and their hypothetical nitride counterparts Cr{sub 2}AN (A = Al, Ge) based on density functional theory calculations. The calculated total energy values indicate that a variety of spin ordering of these four compounds depending on interlayer-interactions between M-A and M-X within the sublattice, which is supported by bonding analysis. MAX phase materials are discovered to possess exotic magnetic properties which indicates that these materials could serve as promising candidates for novel layered magnetic materials for various electronic and spintronic applications. Further analysis of optical properties for two polarization vectors of Cr{sub 2}AX shows that the reflectivity is high in the visible-ultraviolet region up to ∼15 eV suggesting Cr{sub 2}AX as a promising candidate for use as a coating material. The elastic coefficients (C{sub ij}) and bulk mechanical properties [bulk modulus (K), shear modulus (G), Young's modulus (E), Poisson's ratio (η), and Pugh ratio (G/K)] of these four Cr{sub 2}AX compounds are also calculated and analyzed, which pave the way to predict or design new MAX phases that are less brittle or tougher by having a lower G/K value or higher η.

36 MATERIALS SCIENCE↗

Elastic properties of InGaN and InAlN from first-principles calculations

Elastic properties of wurtzite In{sub x}Ga{sub 1−x}N and In{sub x}Al{sub 1−x}N alloys are investigated using the first principles calculations. For alloys with uniform distribution of In atoms, a Vegard-like approximation can describe the composition dependences of C{sub 12}, C{sub 13}, and C{sub 44} in In{sub x}Ga{sub 1−x}N, and C{sub 12}, C{sub 13}, and C{sub 33} in In{sub x}Al{sub 1−x}N, whereas significant sublinear deviations are found for C{sub 11}and C{sub 33} in In{sub x}Ga{sub 1−x}N and for C{sub 11}and C{sub 44}in In{sub x}Al{sub 1−x}N. These deviations lead to significant changes in determination of strain in In{sub x}Ga{sub 1−x}N and In{sub x}Al{sub 1−x}N layers grown coherently on GaN substrates along polar and nonpolar directions. Changes of the interband transitions energy in In{sub x}Ga{sub 1−x}N/GaN quantum wells due to the inclusion of the nonlinear dependence of the elastic constants on In content do not exceed 25 meV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic-scale observation of parallel development of super elasticity and reversible plasticity in GaAs nanowires

We report the atomic-scale observation of parallel development of super elasticity and reversible dislocation-based plasticity from an early stage of bending deformation until fracture in GaAs nanowires. While this phenomenon is in sharp contrast to the textbook knowledge, it is expected to occur widely in nanostructures. This work indicates that the super recoverable deformation in nanomaterials is not simple elastic or reversible plastic deformation in nature, but the coupling of both.

36 MATERIALS SCIENCE↗

Pressure effect on elastic, lattice dynamic and superconducting behaviour of yttrium sulfide: A first principle study

First principles calculations have been carried out to analyze structural, elastic, and dynamic stability of yttrium sulphide (YS) under hydrostatic compression. The comparison of enthalpies of rocksalt type (B1) and CsCl type cubic (B2) structures determined as a function of compression suggests the B1 → B2 transition at ∼49 GPa (the same transition occurs at ∼48 GPa at 300 K). Various physical quantities such as zero pressure equilibrium volume, bulk modulus, and pressure derivative of bulk modulus have been derived from the theoretically determined equation of state. The single crystal elastic constants derived from the energy strain method agree well with the experimental values. The activation barrier between B1 and B2 phases calculated at transition point is ∼17/mRy/f.u. Our lattice dynamic calculations show that at ambient condition, the B1 phase is lattice dynamically stable, and frequencies of phonon modes in different high symmetry directions of Brillouin zone agrees well with experimental values. The B2 phase also is dynamical stable at ambient condition as well as at ∼49 GPa, supporting our static lattice calculation. The effect of temperature on volume and bulk modulus of the YS in B1 phase has also been examined. The superconducting temperature of ∼2.78 K determine at zero pressure agrees well with experimental data. The effect of pressure is found to suppress the superconducting nature of this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simultaneous determination of the elastic modulus and density/thickness of ultrathin films utilizing micro-/nanoresonators under applied axial force

Thin films are widely used in microelectronics, optics, filters, and various sensing devices. We propose a method to simultaneously determine the elastic modulus and density or thickness of ultrathin films deposited on various substrate materials. This methodology utilizes measurement of the resonant frequencies of the micro-/nanoresonator under intentionally applied axial tension and, consequently, the beam to string transition. Elastic modulus and density/thickness of thin film are obtained from the ratio between the resonant frequencies of the nanoresonator with and without applied axial force.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The alloying element dependence of the local lattice deformation and the elastic properties of Ni{sub 3}Al: A molecular dynamics simulation

Molecular dynamics (MD) together with the modified analytical embedded atom method (MAEAM) is employed to study the alloying elements (Re, Ru, Co, and Ta) dependence of the elastic properties of L1{sub 2}-Ni{sub 3}Al. The investigations indicate that the calculated elastic properties of Ni{sub 3}Al are in reasonable agreement with the previous results. The substituting formation energies of the alloying elements in Ni{sub 3}Al are calculated to determine the site preference. It is found out that Re, Ru, and Ta atoms prefer to occupy the Al sites, and the Co atom prefers to occupy the Ni site. Based on Re, Ru, and Ta substituting the 1st, 2nd, 3rd, and 4th nearest-neighbor atoms, we ascertain that the substituting manners of these alloying elements have a decisive effect on the bulk modulus and the local crystal lattice of Ni{sub 3}Al. Moreover, for Re, the bonding interaction plays a predominant role in the improvement in the bulk modulus of Ni{sub 3}Al, whereas the size effect of Ru and Ta on the improvement in the bulk modulus is more obvious. Finally, the potential reasons of which the alloying elements enhance the bulk modulus are discussed in details.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strengthening and toughening metallic glasses: The elastic perspectives and opportunities

There exist general conflicts between strength and toughness in crystalline engineering materials, and various strengthening and toughening strategies have been developed from the dislocation motion perspectives. Metallic glasses (MGs) have demonstrated great potentials owing to their unique properties; however, their structural applications are strictly limited. One of the key problems is that the traditional strengthening and toughening strategies and mechanisms are not applicable in MGs due to the absence of dislocations and crystalline microstructures. Here, we show that the strength and toughness, or equivalently the shear modulus and Poisson's ratio, are invariably mutually exclusive in MGs. Accordingly, the MGs can be categorized into four groups with different levels of integrated mechanical properties. It is further revealed that the conflicts originate fundamentally from the atomic bonding structures and the levels of strength-toughness combinations are indeed dominated by the bulk modulus. Moreover, we propose novel strategies for optimizing the mechanical properties of MGs from the elastic perspectives. We emphasize the significance of developing high bulk modulus MGs to achieve simultaneously both high strength and good toughness and highlight the elastic opportunities for strengthening and toughening materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural phase transition and elastic properties of hafnium dihydride: A first principles study

The structural and elastic properties of Hafnium dihydride (HfH{sub 2}) are investigated by first principles calculation based on density functional theory using Vienna ab-initio simulation package (VASP). The calculated lattice parameters are in good agreement with the available results. A pressure induced structural phase transition from CaF{sub 2} to FeS{sub 2} phase is observed in HfH{sub 2} at 10.75 GPa. The calculated elastic constants indicate that this hydride is mechanically stable at ambient condition.

36 MATERIALS SCIENCE↗

Elastic properties of silver borate glasses doped with praseodymium oxide

A series of glasses xPr{sub 6}O{sub 11−}(35−x) Ag{sub 2}O−65B{sub 2}O{sub 3} with x=0, 0.1, 0.2, 0.3, 0.4 and 0.5 mol % were synthesized by melt quenching technique. Longitudinal and shear ultrasonic velocity were measured at 5 MHz frequency and at room temperature. Elastic moduli, Poisson's ratio and Debye temperature have been calculated from the measured density and ultrasonic velocity at room temperature. The experimental results indicate that the elastic constants depend upon the composition of the glasses. The role of the Pr{sub 6}O{sub 11} inside the glass network was discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First principles study on electronic structure and elastic properties of LaCd and LaHg

Full -potential linearized augmented plane wave method (FP- LAPW) has been used for the comparative study of electronic structure and elastic properties of CsCl-type LaCd and LaHg intermetallic compounds using generalized gradient approximation (GGA). The density of states at the Fermi Level, N (E{sub F}), is found to be 0.06 and 3.03 states/eV for LaCd and LaHg respectively. We report elastic constants for these compounds for the first time. The ductility/brittleness of these compounds has been analyzed using Pugh rule and Cauchy’s pressure.

36 MATERIALS SCIENCE↗

Improvement in elastic properties of CuAl{sub 0.4}Fe{sub 1.6}O{sub 4} spinel ferrite by rapid thermal cooling

The elastic properties of spinel ferrite composition, CuAl{sub 0.4}Fe{sub 1.6}O{sub 4}, quenched from final sintering temperature of 1373 K to liquid nitrogen temperature (∼ 80K) have been studied by means of X-ray powder diffractometry and pulse echo-overlap technique (9 MHz) at 300 K. The magnitude of elastic constants is found to enhance by 15% compared to slowly-cooled counterpart. The observed mechanical strengthening has been discussed in the light of compressive stress on the surface, with tensile stresses at interior regions and corresponding changes in structural parameters. The B{sub o}/G{sub o} ratio indicates the brittle nature of CuAl{sub 0.4}Fe{sub 1.6}O{sub 4}.

36 MATERIALS SCIENCE↗