Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “digital computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Performance and control study of a low-pressure-ratio turbojet engine for a drone aircraft

The results of analog and digital computer studies of a low-pressure-ratio turbojet engine system for use in a drone vehicle are presented. The turbojet engine consists of a four-stage axial compressor, single-stage turbine, and a fixed area exhaust nozzle. Three simplified fuel schedules and a generalized parameter fuel control for the engine system are presented and evaluated. The evaluation is based on the performance of each schedule or control during engine acceleration from a windmill start at Mach 0.8 and 6100 meters to 100 percent corrected speed. It was found that, because of the higher acceleration margin permitted by the control, the generalized parameter control exhibited the best dynamic performance.

Seldner, K.↗
NASA NTRS1972

A method for analyzing dynamic stall of helicopter rotor blades

A model for each of the basic flow elements involved in the unsteady stall of a two-dimensional airfoil in incompressible flow is presented. The interaction of these elements is analyzed using a digital computer. Computations of the loading during transient and sinusoidal pitching motions are in good qualitative agreement with measured loads. The method was used to confirm that large torsional response of helicopter blades detected in flight tests can be attributed to dynamic stall.

Crimi, P.↗
NASA NTRS1971

Analysis of simulated multispectral data from earth resources satellites

The validity of the applicability assumption was determined through the simulation of ERTS and Skylab data using available aircraft scanner systems. The research techniques compared aircraft multispectral scanner data obtained under nominal conditions at low altitudes. Maximum likelihood decision criteria algorithms implemented on a digital computer were used to classify training set data. Comparisons between percentages of correct classifications were made, along with implications as to the techniques of satellite analysis.

White, D. A.↗
NASA NTRS1972

Digital simulation of continuous error models with application to an instrument landing system error

A digital simulation of the continuous error of the localized beam of a conventional instrument landing system is discussed. The digital simulation was developed during the analysis of space shuttle navigation capabilities. A discrete mathematical model for use on a digital computer is described. The model generates an output random sequence which is equivalent, for simulation purposes, to the desired random process. The model is a system of difference equations driven by a zero-mean Gaussian random sequence.

Merrick, R. B.↗
NASA NTRS1969

Optimal feedback control for nonlinear control moment gyro systems

A study was made, leading to development and analysis of a technique allowing the control moment gyro (CMG) momentum vectors to avoid adverse orientations and thus to provide optimal control for the Apollo Telescope Mount. The technique was formulated in terms of a feedback scheme using a check factor, K, formed as the product of the dot products of the three CMG momentum unit vectors. The parameter K approaches unity for all adverse orientations and was used to initiate a single correction maneuver to rotate the CMG momenta away from a pending adverse orientation and to reduce K to an acceptable value. A digital computer program for ATM simulations was modified to incorporate this correction maneuver and performance was evaluated in simulated cases. Antiparallelism was used as the primary example for the evaluation of the feedback optimization technique.

Kyle, R. G.↗
NASA NTRS1971

Stratification calculations in a heated cryogenic oxygen storage tank at zero gravity

A cylindrical one-dimensional model of the Apollo cyrogenic oxygen storage tank has been developed to study the effect of stratification in the tank. Zero gravity was assumed, and only the thermally induced motions were considered. The governing equations were derived from conservation laws and solved on a digital computer. Realistic thermodynamic and transport properties were used. Calculations were made for a wide range of conditions. The results show the fluid behavior to be dependent on the quantity in the tank or equivalently the bulk fluid temperature. For high quantities (low temperatures) the tank pressure rose rapidly with heat addition, the heater temperature remained low, and significant pressure drop potentials accrued. For low quantities the tank pressure rose more slowly with heat addition and the heater temperature became high. A high degree of stratification resulted for all conditions; however, the stratified region extended appreciably into the tank only for the lowest tank quantity.

Shuttles, J. T.↗
NASA NTRS1970

Preliminary software development for optical mirror figure control

The maintenance of accurate primary mirror figure in the face of environmental disturbances is the key to the achievement of diffraction-limited performance in a large space telescope. In order to develop the concepts of optical mirror figure control, an experimental program was initiated. A major component in this experiment will be an XDS Sigma 5.7 digital computer which will realize the control algorithm. A software package is described which realizes linear optimal, simplified linear, and iterative optimal control algorithms. The software, in addition, provides for interactive communication between the operator and the computer, and interaction between the computer and the experimental hardware elements. A brief description of a small hybrid computer system is also presented.

Mackinnon, D.↗
NASA NTRS1972

Improved guidance hardware study for the scout launch vehicle

A market survey and evaluation of inertial guidance systems (inertial measurement units and digital computers) were made. Comparisons were made to determine the candidate systems for use in the Scout launch vehicle. Error analyses were made using typical Scout trajectories. A reaction control system was sized for the fourth stage. The guidance hardware to Scout vehicle interface was listed.

Schappell, R. T.↗
NASA NTRS1972

Preliminary design of an auxiliary power unit for the space shuttle. Volume 4: Selected system supporting studies

Selected system supporting analyses in conjunction with the preliminary design of an auxiliary power unit (APU) for the space shuttle are presented. Both steady state and transient auxiliary power unit performance, based on digital computer programs, were examined. The selected APU provides up to 400 horsepower out of the gearbox, weighs 227 pounds, and requires 2 pounds per shaft horsepower hour of propellants.

Hamilton, M. L.↗
NASA NTRS1972

High Energy Astronomy Observatory star tracker search program

The development of a control system to accommodate the scientific payload of the High Energy Astronomy Observatory (HEAO) is discussed. One of the critical elements of the system is the star tracker subsystem, which defines an accurate three-axis attitude reference. A digital computer program has been developed to evaluate the ability of a particular star tracker configuration to meet the requirements for attitude reference at various vehicle orientations. Used in conjuction with an adequate star catalog, the computer program provides information on availability of stars for each tracker and on the ability of the system to maintain three-axis attitude reference throughout a representative sequence of vehicle orientations.

Weiler, W. J.↗
NASA NTRS1972

Operating executive for the DSIF tracking subsystem software

The advanced engineering model of the DSIF tracking subsystem (DTS) is being developed by the Deep Space Instrumentation Facility. The DTS will provide effective and reliable tracking and data acquisition support for the complex planetary and interplanetary space flight missions planned for the 1970's. The nucleus of the subsystem is a Honeywell H832 digital computer. The design and capabilities of the real-time operating executive software are described.

Poulson, P. L.↗
NASA NTRS1972

A summary of Michigan program for earth resource information systems

A summary and guide to the development of earth resources information systems which employ multispectral remote sensing are reported. Major areas of activities center on improved throughput parallel processing systems, improved processing techniques, practical use of techniques in user applications, and improved sensors. Cost effectiveness considerations point to signature extension, parallel processing all-digital computers, and airborne multispectral imaging radar as some of the improvement technologies.

Erickson, J. D.↗
NASA NTRS1972

Comparison of genetic algorithms with conjugate gradient methods

Genetic algorithms for mathematical function optimization are modeled on search strategies employed in natural adaptation. Comparisons of genetic algorithms with conjugate gradient methods, which were made on an IBM 1800 digital computer, show that genetic algorithms display superior performance over gradient methods for functions which are poorly behaved mathematically, for multimodal functions, and for functions obscured by additive random noise. Genetic methods offer performance comparable to gradient methods for many of the standard functions.

Bosworth, J. L.↗
NASA NTRS1972

Numerical analysis of the transient response of an axisymmetric ablative char layer considering internal flow effects

The differential equations governing the transient response of the char layer of an ablating axisymmetric body, internal pyrolysis gas flow effects being considered, have been derived. These equations have been expanded into finite difference form and programed for numerical solution on a digital computer. Numerical results compare favorably with simplified exact solutions. The complete numerical analysis was used to obtain solutions for two representative body shapes subjected to a typical entry heating environment. Pronounced effects of the lateral flow of pyrolysis gases on the mass flow field within the char layer and the associated surface and pyrolysis interface recession rates are shown.

Pittman, C. M.↗
NASA NTRS1972

SCIP2 flight instrumentation specification for parameter identification: User's guide

SCIP2 which is a digital computer program that can be used to investigate the effects of instrumentation errors on the accuracy of aircraft stability and control derivatives identified from flight test data is presented. The program is based on the assumptions that the aircraft differential equations of motion are linear and consist of small perturbations about a quasisteady flight condition. It is also assumed that a Newton-Raphson optimization technique is used for identifying the estimates of the parameters. A summary of the equations which are coded in the program are included.

Taniguchi, N.↗
NASA NTRS1972

A digital simulation of message traffic for natural disaster warning communications satellite

Various types of weather communications are required to alert industries and the general public about the impending occurrence of tornados, hurricanes, snowstorms, floods, etc. A natural disaster warning satellite system has been proposed for meeting the communications requirements of the National Oceanic and Atmospheric Administration. Message traffic for a communications satellite was simulated with a digital computer in order to determine the number of communications channels to meet system requirements. Poisson inputs are used for arrivals and an exponential distribution is used for service.

Hein, G. F.↗
NASA NTRS1972

A feedback control model for network flow with multiple pure time delays

A control model describing a network flow hindered by multiple pure time (or transport) delays is formulated. Feedbacks connect each desired output with a single control sector situated at the origin. The dynamic formulation invokes the use of differential difference equations. This causes the characteristic equation of the model to consist of transcendental functions instead of a common algebraic polynomial. A general graphical criterion is developed to evaluate the stability of such a problem. A digital computer simulation confirms the validity of such criterion. An optimal decision making process with multiple delays is presented.

Press, J.↗