Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “developable planes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

SU-E-T-563: Multi-Fraction Stereotactic Radiosurgery with Extend System of Gamma Knife: Treatment Verification Using Indigenously Designed Patient Simulating Multipurpose Phantom

Purpose: Aim of the study is to evaluate mechanical and radiological accuracy of multi-fraction regimen and validate Gamma knife based fractionation using newly developed patient simulating multipurpose phantom. Methods: A patient simulating phantom was designed to verify fractionated treatments with extend system (ES) of Gamma Knife however it could be used to validate other radiotherapy procedures as well. The phantom has options to insert various density material plugs and mini CT/MR distortion phantoms to analyze the quality of stereotactic imaging. An additional thorax part designed to predict surface doses at various organ sites. The phantom was positioned using vacuum head cushion and patient control unit for imaging and treatment. The repositioning check tool (RCT) was used to predict phantom positioning under ES assembly. The phantom with special inserts for film in axial, coronal and sagittal plane were scanned with X-Ray CT and the acquired images were transferred to treatment planning system (LGP 10.1). The focal precession test was performed with 4mm collimator and an experimental plan of four 16mm collimator shots was prepared for treatment verification of multi-fraction regimen. The prescription dose of 5Gy per fraction was delivered in four fractions. Each fraction was analyzed using EBT3 films scanned with EPSON 10000XL Scanner. Results: The measurement of 38 RCT points showed an overall positional accuracy of 0.28mm. The mean deviation of 0.28% and 0.31 % were calculated as CT and MR image distortion respectively. The radiological focus accuracy test showed its deviation from mechanical center point of 0.22mm. The profile measurement showed close agreement between TPS planned and film measured dose. At tolerance criteria of 1%/1mm gamma index analysis showed a pass rate of > 95%. Conclusion: Our results show that the newly developed multipurpose patient simulating phantom is highly suitable for the verification of fractionated stereotactic radiosurgery using ES of Gamma knife. The study is a part of intramural research project of Research Section, All India Institute of Medical Sciences New Delhi India (A 247)

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2016

Probing surface recombination velocities in semiconductors using two-photon microscopy

The determination of minority-carrier lifetimes and surface recombination velocities is essential for the development of semiconductor technologies such as solar cells. The recent development of two-photon time-resolved microscopy allows for better measurements of bulk and subsurface interfaces properties. Here, we analyze the diffusion problem related to this optical technique. Our three-dimensional treatment enables us to separate lifetime (recombination) from transport effects (diffusion) in the photoluminescence intensity. It also allows us to consider surface recombination occurring at a variety of geometries: a single plane (representing an isolated exposed or buried interface), a two parallel planes (representing two inequivalent interfaces), and a spherical surface (representing the enclosing surface of a grain boundary). We provide fully analytical results and scalings directly amenable to data fitting and apply those to experimental data collected on heteroepitaxial CdTe/ZnTe/Si.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Multiresponsive polymeric microstructures with encoded predetermined and self-regulated deformability

Dynamic functions of biological organisms often rely on arrays of actively deformable microstructures undergoing a nearly unlimited repertoire of predetermined and self-regulated reconfigurations and motions, most of which are difficult or not yet possible to achieve in synthetic systems. Here, we introduce stimuli-responsive microstructures based on liquid-crystalline elastomers (LCEs) that display a broad range of hierarchical, even mechanically unfavored deformation behaviors. By polymerizing molded prepolymer in patterned magnetic fields, we encode any desired uniform mesogen orientation into the resulting LCE microstructures, which is then read out upon heating above the nematic–isotropic transition temperature (T N–I ) as a specific prescribed deformation, such as twisting, in- and out-of-plane tilting, stretching, or contraction. By further introducing light-responsive moieties, we demonstrate unique multifunctionality of the LCEs capable of three actuation modes: self-regulated bending toward the light source at T < T N–I , magnetic-field–encoded predetermined deformation at T > T N–I , and direction-dependent self-regulated motion toward the light at T > T N–I . We develop approaches to create patterned arrays of microstructures with encoded multiple area-specific deformation modes and show their functions in responsive release of cargo, image concealment, and light-controlled reflectivity. We foresee that this platform can be widely applied in switchable adhesion, information encryption, autonomous antennae, energy harvesting, soft robotics, and smart buildings.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Wire-cell 3D pattern recognition techniques for neutrino event reconstruction in large LArTPCs: algorithm description and quantitative evaluation with MicroBooNE simulation

Wire-Cell is a 3D event reconstruction package for liquid argon time projection chambers. Through geometry, time, and drifted charge from multiple readout wire planes, 3D space points with associated charge are reconstructed prior to the pattern recognition stage. Pattern recognition techniques, including track trajectory and dQ/dx (ionization charge per unit length) fitting, 3D neutrino vertex fitting, track and shower separation, particle-level clustering, and particle identification are then applied on these 3D space points as well as the original 2D projection measurements. A deep neural network is developed to enhance the reconstruction of the neutrino interaction vertex. Compared to traditional algorithms, the deep neural network boosts the vertex efficiency by a relative 30% for charged-current ν e interactions. Therefore, this pattern recognition achieves 80–90% reconstruction efficiencies for primary leptons, after a 65.8% (72.9%) vertex efficiency for charged-current ν e (ν μ ) interactions. Based on the resulting reconstructed particles and their kinematics, we also achieve 15-20% energy reconstruction resolutions for charged-current neutrino interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Volume extrapolation via eigenvector continuation

Here, we develop an extension of eigenvector continuation (EC) that makes it possible to extrapolate simulations of quantum systems in finite periodic boxes across large ranges of box sizes. The formal justification for this approach, which we call finite-volume eigenvector continuation (FVEC), is provided by matching periodic functions at different box sizes. As concrete FVEC implementation we use a discrete variable representation based on plane-wave states and present several applications calculated within this framework.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Electrical Control of Magnetic Phase Transition in a Type-I Multiferroic Double-Metal Trihalide Monolayer

Controlling magnetism of two-dimensional multiferroics by an external electric field provides special opportunities for both fundamental research and future development of low-cost electronic nanodevices. Here, we report a general scheme for realizing a magnetic phase transition in 2D type-I multiferroic systems through the reversal of ferroelectric polarization. First, based on first-principles calculations, we demonstrate that a single-phase 2D multiferroic, namely, ReWCl 6 monolayer, exhibits two different low-symmetric ($C_2$) phases with opposite in-plane electric polarization and different magnetic order. As a result, an antiferromagnetic-to-ferromagnetic phase transition can be realized by reversing the in-plane electric polarization through the application of an external electric field. These findings not only enrich the 2D multiferroic family, but also uncover a unique and general mechanism to control magnetism by electric field, thus stimulating experimental interest.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Magnetic behavior and spin-lattice coupling in cleavable van der Waals layered CrCl 3 crystals

CrCl 3 is a layered insulator that undergoes a crystallographic phase transition below room temperature and orders antiferromagnetically at low temperature. Weak van der Waals bonding between the layers and ferromagnetic in-plane magnetic order make it a promising material for obtaining atomically thin magnets and creating van der Waals heterostructures. In this work we have grown crystals of CrCl 3 , revisited the structural and thermodynamic properties of the bulk material, and explored mechanical exfoliation of the crystals. We find two distinct anomalies in the heat capacity at 14 and 17 K confirming that the magnetic order develops in two stages on cooling, with ferromagnetic correlations forming before long-range antiferromagnetic order develops between them. This scenario is supported by magnetization data. A magnetic phase diagram is constructed from the heat capacity and magnetization results. We also find an anomaly in the magnetic susceptibility at the crystallographic phase transition, indicating some coupling between the magnetism and the lattice. First-principles calculations accounting for van der Waals interactions also indicate spin-lattice coupling, and find multiple nearly degenerate crystallographic and magnetic structures consistent with the experimental observations. Lastly, we demonstrate that monolayer and few-layer CrCl 3 specimens can be produced from the bulk crystals by exfoliation, providing a path for the study of heterostructures and magnetism in ultrathin crystals down to the monolayer limit.

36 MATERIALS SCIENCE↗
DOE OSTI2016

A Study of a Mini-Drift GEM Tracking Detector

In this paper, a GEM tracking detector with an extended drift region has been studied as part of an effort to develop new tracking detectors for future experiments at RHIC and for the Electron Ion Collider that is being planned for BNL or JLAB. The detector consists of a triple GEM stack with a 1.6 cm drift region that was operated in a mini TPC type configuration. Both the position and arrival time of the charge deposited in the drift region were measured on the readout plane which allowed the reconstruction of a short vector for the track traversing the chamber. The resulting position and angle information from the vector could then be used to improve the position resolution of the detector for larger angle tracks, which deteriorates rapidly with increasing angle for conventional GEM tracking detectors using only charge centroid information. Two types of readout planes were studied. One was a COMPASS style readout plane with 400 μm pitch XY strips and the other consisted of 2 × 10 mm 2 chevron pads. The detector was studied in test beams at Fermilab and CERN, along with additional measurements in the lab, in order to determine its position and angular resolution for incident track angles up to 45 degrees. Several algorithms were studied for reconstructing the vector using the position and timing information in order to optimize the position and angular resolution of the detector for the different readout planes. Finally, applications for large angle tracking detectors at RHIC and EIC are also discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

FELIX-Based Readout of the Single-Phase ProtoDUNE Detector

Large liquid argon (LAr) time projection chambers (TPCs) have been adopted for the Deep Underground Neutrino Experiment (DUNE) experiment's far detector, which will be composed of four 17-kton detectors situated 1.5 km underground at the Sanford Underground Research Facility. This represents a large increase in scale compared to existing experiments. Both single- and dual-phase technologies will be validated at CERN, in cryostats capable of accommodating full-size detector modules, and exposed to low-energy charged particle beams. This program, called ProtoDUNE, also allows for extensive tests of data acquisition strategies. The Front-End LInk eXchange (FELIX) readout system was initially developed within the ATLAS collaboration and is based on custom field-programmable gate array (FPGA)-based Peripheral Component Interconnect Express input/output cards, connected through point-to-point links to the detector front end and hosted in commodity servers. FELIX will be used in the single-phase ProtoDUNE setup to read the data coming from 2560 anode wires organized in a single anode plane assembly (APS) structure. With a continuous readout at a sampling rate of 2 MHz, the system must deal with an input rate of 96 Gb/s. An external trigger will preselect time windows of 5 ms with interesting activity expected inside the detector. Event building will occur for triggered events, at a target rate of 25 Hz; the readout system will form fragments from the data samples matching the time window, carry out lossless compression, and forward the data to event building nodes over 10-Gb/s Ethernet. This paper discusses the design and implementation of this readout system as well as the first operational experience.

47 OTHER INSTRUMENTATION↗
DOE OSTI2016

Volume of interest CBCT and tube current modulation for image guidance using dynamic kV collimation

Purpose: The focus of this work is the development of a novel blade collimation system enabling volume of interest (VOI) CBCT with tube current modulation using the kV image guidance source on a linear accelerator. Advantages of the system are assessed, particularly with regard to reduction and localization of dose and improvement of image quality. Methods: A four blade dynamic kV collimator was developed to track a VOI during a CBCT acquisition. The current prototype is capable of tracking an arbitrary volume defined by the treatment planner for subsequent CBCT guidance. During gantry rotation, the collimator tracks the VOI with adjustment of position and dimension. CBCT image quality was investigated as a function of collimator dimension, while maintaining the same dose to the VOI, for a 22.2 cm diameter cylindrical water phantom with a 9 mm diameter bone insert centered on isocenter. Dose distributions were modeled using a dynamic BEAMnrc library and DOSXYZnrc. The resulting VOI dose distributions were compared to full-field CBCT distributions to quantify dose reduction and localization to the target volume. A novel method of optimizing x-ray tube current during CBCT acquisition was developed and assessed with regard to contrast-to-noise ratio (CNR) and imaging dose. Results: Measurements show that the VOI CBCT method using the dynamic blade system yields an increase in contrast-to-noise ratio by a factor of approximately 2.2. Depending upon the anatomical site, dose was reduced to 15%–80% of the full-field CBCT value along the central axis plane and down to less than 1% out of plane. The use of tube current modulation allowed for specification of a desired SNR within projection data. For approximately the same dose to the VOI, CNR was further increased by a factor of 1.2 for modulated VOI CBCT, giving a combined improvement of 2.6 compared to full-field CBCT. Conclusions: The present dynamic blade system provides significant improvements in CNR for the same imaging dose and localization of imaging dose to a predefined volume of interest. The approach is compatible with tube current modulation, allowing optimization of the imaging protocol.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Development of Surface Grain Relief on Self-Ion Irradiated Copper

The development of surface grain relief has been observed on self-ion irradiated pure polycrystalline copper. However, the mechanistic origin of this feature has yet to be determined. Two possible mechanisms, anisotropic creep relaxation of void swelling induced stresses and crystallographic orientation-dependent sputtering rate differences, are being investigated as the cause of this evolution. This work focuses on characterizing the surface development and investigating the mechanism of orientation-dependent sputtering. Based on the conditions under which these specimens were irradiated, preferential sputtering is not likely to be the cause of the observed grain relief. Surface grain relief can greatly influence the ability to non-destructively detect irradiation-induced effects in polycrystalline metals. Determining the origin of grain relief development is necessary before this surface feature can be used an indicator of irradiation-induced effects in pure copper and other alloys. The development of surface grain relief has been observed on self-ion irradiated pure polycrystalline copper irradiated to 100 dpa. This surface feature was first noted by measuring samples using transient grating spectroscopy and later confirmed using scanning electron microscopy. Calculations of single-crystal sputtering rates show that the difference in sputtering yields between a randomly-oriented solid and a low-index plane is not sufficient to account for the observed height difference. SEM images appear to show a maximum step-height difference of around 100 nm and differential sputtering can only account for differences on the order of 10 nm at most. This determination indicates that anisotropic creep relaxation may be the mechanistic origin of the observed surface features. If this is the case, which will be confirmed by future work, then TG spectroscopy may be an effective tool for the determination of the onset of certain radiation-damage evolution. For example, if the onset of creep relaxation is strongly correlated to a specific level of void swelling and if the surface features present as a result of creep relaxation can be observed using TG spectroscopy, then accurate determinations of particular levels of void swelling may be made. (authors)

36 MATERIALS SCIENCE↗
DOE OSTI2017

Adjusted Graphite Thermal Scattering Data Applied to Fluoride-Salt-Cooled Reactors

Thermal scattering data is a key component of fission reactor simulation. While most materials can be reasonably modeled with a free gas approximation, the moderators in thermal systems require a more rigorous treatment to sufficiently capture their specific neutron interaction physics. Graphite does not typically feature as a principle moderator in power reactors in service today, but remains an attractive prospect for a number of new reactor concepts currently in development. In comparison to light water, a material nearly ubiquitous in thermal reactors, graphite offers a better neutron economy by way of a small absorption cross section, high thermodynamic stability and can be incorporated into the structure of the core itself. Graphite in its purest form is a crystalline material composed of stacked layers of graphene, a hexagonal planar lattice of carbon atoms. In-plane, each carbon atom is covalently bonded to 3 neighbouring carbon atoms, creating a strong bond, while between planes only a weak van der Waals force exists. Pure graphite has a density of 2.26 g/cm{sup 3}. However, reactor-grade contains a significant amount of carbon binder, leading to a porous bulk medium with randomly oriented micro crystals. Densities of 1.5 - 1.9 g/cm{sup 3} are typical for reactor-grade graphite, corresponding to porosities on the order of 10-30%. This deviation from pure crystalline graphite should be accounted for in the thermal scattering data. When an incident neutron is in or near the thermal region, its de Broglie wavelength is the same order as the molecular bond lengths, leading to elastic scattering. At similar energies, the dynamics of the moderator lattice (in the case of solid moderators) can cause inelastic scattering. For these moderators, special cross sections should be calculated and used in reactor simulations. To generate this thermal scattering data, parameters pertaining to the properties and structure of the material in question are fed into a nuclear data processing code, such as NJOY. Within NJOY is a module called LEAPR which is used to generate the thermal scattering law S(α,β), which is in turn is fed into another module THERMR which is used to generate thermal cross sections that factor in the molecular-scale scattering phenomena. The core of the thermal scattering law is the phonon spectrum ρ(β) which describes the modes of excitation of the material lattice. An investigation into the phonon frequency spectrum was conducted at North Carolina State University (NCSU) for reactor-grade graphite which accounts for porosity. This phonon spectrum was calculated using the ab initio density functional theory (DFT) code VASP. The inelastic cross section calculated using this spectrum was found to have good agreement with relevant experimental data. The resulting spectra differed from the benchmark spectrum produced by Young and Koppel, the same data used in current nuclear data evaluations. The latter uses the lattice dynamics of perfect crystalline graphite with four force constants fitted to the model from thermodynamics data from reactor-grade (porous) graphite, which yields a reasonable approximation to the phonon spectrum of reactor-grade graphite.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Development of a Comprehensive Two-Phase Flow Database for the Validation of NEK-2P

Three-dimensional (3-D) two-phase Computational Fluid Dynamics (CFD) codes are emerging as a powerful and potentially practical tool for applications in which detailed local flow information is needed. However, two-phase flow models and associated closure relations are not well established for CFD applications, which is partly due to the lack of high-quality validation data. The main objective of this work is to develop a comprehensive database of two-phase flows that can be used to validate two-phase CFD codes such as NEK-2P. In this project, four advanced local measurement systems, including Particle Image Velocimetry and Planar Laser-Induced Fluorescence (PIV-PLIF), high-speed imaging, x-ray densitometry, and multi-sensor conductivity probe are employed to measure the local two-phase flow parameters of both gas and liquid phases. By combining these techniques, the local void fraction, bubble velocity, interfacial area concentration, bubble frequency, liquid velocity, turbulence intensity, etc., in various two-phase flow regimes can be obtained. These local measurement techniques are first used in a 25.4 mm circular pipe test section. Seven air-water two-phase flow conditions spanning the bubbly, slug, churn-turbulent, and annular flow regimes are measured in this facility. The obtained database contains the radial profiles of both gas- and liquid-phase parameters at three axial locations along the test section. The second facility used in this work contains a 30 mm × 10 mm rectangular test section, in which three two-phase flow and two single-phase flow conditions are measured. Two-dimensional distributions of local two-phase flow parameters in the cross-sectional plane are measured in this facility at three axial locations as well. A facility featuring a 3×3 electrically heated rod bundle is also designed and being constructed in this project. This facility is specially designed for optical measurements and is expected to provide high-quality boiling data in the future. Preliminary analyses have been performed for the data taken in the 25.4 mm circular pipe. Both center-peaked and wall-peaked void fraction profiles have been observed in the data depending on the two-phase flow conditions and/or developing lengths. The 1-D drift-flux model was evaluated with the newly obtained datasets, in which both gas- and liquid-phases data were directly measured. The distribution parameter model has been optimized based on a new void-profile classification method proposed in this study. The optimized drift-flux model shows a significant improvement in predicting both gas velocity and void fraction. The measured liquid-phase turbulence was used to benchmark Sato’s turbulence model considering the bubble-induced shear stress for the three tested bubbly flows. The benchmark results showed good agreement between the PIV measurements and model predictions. In the bubbly flows tested that have low void fractions less than 3%, the effect of the bubble-induced turbulence was found not significant. However, the bubble-induced shear stress becomes important with the increase of the void fraction. The Conjugate Heat Transfer (CHT) model was developed and implemented in NEK-2P. This model allows the coupled simulation of the solid domain and two-phase fluid domain, allowing the specification of realistic boundary conditions. The CHT implementation was verified first with non-boiling simulations. The predicted temperatures in the fluid domain were shown to be identical in simulations with or without the CHT model. The CHT model was then validated through simulations of three Becker benchmark CHF tests performed under both Dryout (DO) and Departure from Nucleate Boiling (DNB) conditions. Reasonably good agreement was obtained between calculated wall temperatures and corresponding experimental data.

42 ENGINEERING↗
DOE OSTI2022

Strongly-overdoped $\mathrm{La}$ 2- $_{x}$$\mathrm{Sr}$$_{x}$$\mathrm{CuO}$ 4 : Evidence for Josephson-coupled grains of strongly-correlated superconductor

The interpretation of how superconductivity disappears in cuprates at large hole doping has been controversial. To address this issue, here we present an experimental study of single-crystal and thin film samples of La 2-x Sr x CuO 4 (LSCO) with x ≥0.25. In particular, measurements of bulk susceptibility on LSCO crystals with x = 0.25 indicate an onset of diamagnetism at T c1 =38.5 K, with a sharp transition to a phase with full bulk shielding at T c2 =18 K, independent of field direction. Strikingly, the in-plane resistivity only goes to zero at T c2 . Inelastic neutron scattering on 0.25 crystals confirms the presence of low-energy incommensurate magnetic excitations with reduced strength compared to lower doping levels. The ratio of the spin gap to T c2 is anomalously large. Our results are consistent with a theoretical prediction for strongly overdoped cuprates by Spivak, Oreto, and Kivelson, in which superconductivity initially develops within disconnected self-organized grains characterized by a reduced hole concentration, with bulk superconductivity occurring only after superconductivity is induced by proximity effect in the surrounding medium of higher hole concentration. Beyond the superconducting-to-metal transition, local differential conductance measurements on an LSCO thin film suggest that regions with pairing correlations survive, but are too dilute to support superconducting order. Future experiments will be needed to test the degree to which these results apply to overdoped cuprates in general.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Functional Domain Walls as Active Elements for Energy Technology

In the past five years in the duration of this project (July 2011-July 2016), we have made a wide range of achievements in both basic research and energy applications along the direction planned in the original proposal. These achievements were reflected by 13 articles published in peer-reviewed journals including Nature Communications, Nano Letters, etc., and one currently in revision at Science. These papers have been accumulatively cited for more than 660 times as of October 2016, according to Web of Science statistics. Specifically, we have made impactful discoveries in the following fields. Basic Research. We have investigated in depth the materials physics of the representative quantum material, VO 2 , on which most of our project is anchored. We have discovered that independent diffusion of heat and charge in the absence of quasiparticles in metallic VO 2 leads to an anomalously low electronic thermal conductivity, dramatically violating the Wiedemann-Franz law, which is a robust law governing behavior of normal conductors stating that free electrons transport heat proportionally to the charge they transport. In addition, we have discovered a peculiar thermal rectification effect based on its phase transition, as well as a gating response of the phase transition. In parallel to the work on VO 2 , we have also made breakthroughs in investigation of transition metal dichalcogenides (TMDs): we have experimentally demonstrate a strong anisotropy in in-plane thermal conductivity of black phosphorous, discovered a new, unusual member of the TMDs family, ReS 2 , where the bulk behaves as monolayers due to electronic and vibrational decoupling, unusual interaction between physi-sorbed molecules and 2D semiconductors, and thermally driven crossover from indirect toward direct bandgap in some 2D TMDs. Applications. Based on the understanding and knowledge gained from the basic investigation, we have developed novel tools and devices for energy applications. These include a nanowire based microthermometer for quantitative evaluation of electron beam heating in electron microscopy, giant-amplitude, high-work density microactuators and torsional micromuscles, as well as nanoscale thermometers and powermeters, all based on the VO 2 phase transition.

2D materials↗
DOE OSTI2017

Status update on the US ODS development program

Three papers are attached highlighting some recent progress in the development and testing of Oxide Dispersion Strengthened ferritic steels in tube and plate form. Aydogan et al. (2016) and Alam et al. (2016) papers summarize testing and characterization that has been performed on plate and tube materials. In the Alam et al. paper it was noted that after cross-rolling plate material of 14YWT, microcracks were formed. This resulted from an (001) texture in the plane normal to the plate causing cracking microcracking within that plane. Such microcracking affects low temperature tensile properties up to 200C. It was not seen in tube material produced by hydrostatic extrusion. In the Aydogan et al. (2016) paper characterization was performed on tubes produced from the ODS material, 14YWT. Tubes were formed through hydrostatic extrusion of plate material and hydrostatic extrusion of spray formed tubes. It was noted that strong texture on {001}<110> was formed in the plate material while shear deformation during hot extrusion produced a strong <111> ll ND texture component. In the Aydogan et al. (2017) paper detailed analysis was performed on the change in oxide size with ion irradiation to doses >500 dpa at 450C. The results show strong stability for the 2-4 nm oxide particles with a reduction in size ~25% after 270 dpa and an increase in density.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2015

SU-E-I-11: A New Cone-Beam CT System for Bedside Head Imaging

Purpose: To design and develop a new mobile cone-beam CT (CBCT) system for head imaging with good soft-tissue visibility, to be used bedside in ICU and neurosurgery department to monitor treatment and operation outcome in brain patients. Methods: The imaging chain consists of a 30cmx25cm amorphous silicon flat panel detector and a pulsed, stationary anode monoblock x-ray source of 100kVp at a maximal tube current of 10mA. The detector and source are supported on motorized mechanisms to provide detector lateral shift and source angular tilt, enabling a centered digital radiographic imaging mode and half-fan CBCT, while maximizing the use of the x-ray field and keep the source to detector distance short. A focused linear anti-scatter grid is mounted on the detector, and commercial software with scatter and other corrective algorithms is used for data processing and image reconstruction. The gantry rotates around a horizontal axis, and is able to adjust its height for different patient table positions. Cables are routed through a custom protective sleeve over a large bore with an in-plane twister band, facilitating single 360-degree rotation without a slip-ring at a speed up to 5 seconds per rotation. A UPS provides about 10 minutes of operation off the battery when unplugged. The gantry is on locked casters, whose brake is control by two push handles on both sides for easy reposition. The entire system is designed to have a light weight and a compact size for excellent maneuverability. Results: System design is complete and main imaging components are tested. Initial results will be presented and discussed later in the presentation. Conclusion: A new mobile CBCT system for head imaging is being developed. With its compact size, a large bore, and quality design, it is expected to be a useful imaging tool for bedside uses. The work is supported by a grant from Chinese Academy of Sciences.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Updated design of the CMB polarization experiment satellite LiteBIRD

Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the cosmic microwave background (CMB) by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34GHz and 448GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy's foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5Kelvin for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun-Earth Lagrangian point, L2, are planned for three years. An international collaboration between Japan, USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science (ISAS), JAXA selected LiteBIRD as the strategic large mission No. 2.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗