Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Molecular Mechanisms Underlying Surfactant-Based Plastics De-Inking

Surfactant-mediated binder removal is critical for de-inking pretreatment in plastics recycling, yet the molecular mechanisms governing surfactant performance remain poorly understood. We used all-atom (AA) and coarse-grained (CG) molecular dynamics (MD) simulations alongside alkaline surfactant washing experiments to investigate interactions between a series of surfactants and a polyether urethane (PEU) binder in solution and on a polyethylene (PE) surface. Experiments reveal a range of de-inking efficiencies, ranging from <25 to >95% depending upon surfactant headgroup charge and tail length. AA simulations reveal that charged surfactants reach stable levels of surfactant coverage, while nonionic surfactants aggregate on the binder. CG umbrella sampling calculations quantify the thermodynamics of binder desorption in water. In ∼0.25 M surfactant solutions, up to a 52% reduction in the free energy barrier is computed, with trends in good agreement (R 2 = 0.92, Pearson’s r = –0.96, Spearman’s ρ = –0.83) with experimental de-inking efficiencies. We find that charged surfactants are more effective than nonionic surfactants for de-inking and propose three regimes of surfactant de-inking processes: good de-inking occurs in surfactants that promote PEU desorption with a low radius of gyration (R g ); moderate de-inking occurs when surfactants stabilize PEU but increase R g ; poor de-inking occurs in surfactants that aggregate on the binder and promote extensive anchoring to the surface. Overall, these molecular-level insights have the potential to guide the design of surfactant formulations for plastics recycling applications.

ink removal↗

Exploiting π–π Interactions to Design an Efficient Sorbent for Atrazine Removal from Water

The United States Environmental Protection Agency (EPA) recognizes atrazine, a commonly used herbicide, as an endocrine disrupting compound. Excessive use of this agrochemical results in contamination of surface and ground water supplies via agricultural runoff. Efficient removal of atrazine from contaminated water supplies is paramount. Here, the mechanism governing atrazine adsorption in Zr 6 -based MOFs has been thoroughly investigated by studying the effects of MOF linker and topology on atrazine uptake capacity and uptake kinetics. We found that the mesopores of NU-1000 facilitated rapid atrazine uptake saturating in < 5 min and that the pyrene-based linkers offered sufficient sites for π-π interactions with atrazine as demonstrated by the near 100% uptake. Without the presence of a pyrene-based linker, NU-1008, a MOF similar to NU-1000 with respect to surface area and pore size, removed <20% of the exposed atrazine. Here, these results suggest that the atrazine uptake capacity demonstrated by NU-1000 stems from the presence of a pyrene core in the MOF linker, affirming that π-π stacking is responsible for driving atrazine adsorption. Furthermore, NU-1000 displays an exceptional atrazine removal capacity through 3 cycles of adsorption-desorption. Powder X-ray diffraction (PXRD) and Brunauer–Emmett–Teller (BET) surface area analysis confirmed the retention of MOF crystallinity and porosity throughout the adsorption-desorption cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanically and Chemically Robust Lanmodulin-Functionalized Silk Sponges for Rare Earth Element Sequestration

The extraction of rare-earth elements (REEs) from low-grade sources like electronic waste (E-waste) could supplement current unsustainable mining practices. REEs are crucial for various industries, but supply struggles to meet growing demand. Herein, we present an environmentally friendly method for REE extraction using silk protein sponges functionalized with lanmodulin (LanM), a protein that selectively binds REEs. These sponges are relatively facile to fabricate and scale, while offering highly selective REE binding. The REEs can then be recovered via simple acid leaching, allowing sponge reuse for multiple cycles as well as specific desorption of different REEs by changing the pH of the desorption buffer. Finally, this method avoids harmful solvents used in traditional extraction and enables recycling of REEs from industrial and E-waste.

REEs↗

Alcohol-Induced Low-Temperature Blockage of Supported-Metal Catalysts for Enhanced Catalysis

The partial or complete blockage of active sites of metal nanoparticles (NPs) on supported-metal catalysts has been of interest for tuning the stability, selectivity, and rate of reactions. In this study, we show that Au-sites in Au/TiO 2 surprisingly become blocked upon treatment in common alcohols (2-propanol and methanol), with 2-propanol causing a greater extent of blockage. Nearly 95% of Au-sites are covered after treatment in 2-propanol at room temperature, followed by desorption at 150 °C. Infrared spectroscopy of CO adsorption unambiguously confirms the occurrence of this phenomenon. Electron energy loss spectroscopy (EELS), temperature-programmed desorption (TPD), Raman spectroscopy, and DFT simulations suggest that the formation of carbon deposits from 2-propanol decomposition and/or the migration of a TiO x layer over the supported NPs may be responsible for the blockage of Au-sites. Nearly full coverage of Au NPs after treatment in 2-propanol led to negligible activity for catalytic CO oxidation, whereas partial retraction of the overlayer led to enhanced activity with time-on-stream, suggesting a self-activating catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pore-Edge Tailoring of Single-Atom Iron–Nitrogen Sites on Graphene for Enhanced CO 2 Reduction

Hosting atomically dispersed nitrogen-coordinated iron sites (Fe-N 4 ) on graphene offers unique opportunities for driving electrochemical CO 2 reduction reaction (CO 2 RR) to CO. However, the strong adsorption of *CO on the Fe-N 4 site embedded in intact graphene limits current density due to slow CO desorption process. Herein, we report how the manipulation of pore edges on graphene alters the local electronic structure of isolated Fe-N 4 sites and improves their intrinsic reactivity for prompting CO generation. We demonstrate that constructing holes on graphene basal plane to support Fe-N 4 can significantly enhance its CO 2 RR compared to the pore-deficient graphene-supported counterpart, exhibiting a CO Faradaic efficiency of 94% and a turnover frequency of 1630 h -1 at 0.58 V vs RHE. Mechanistic studies reveal that the incorporation of pore edges results in the downshifting of the d-band center of Fe sites, which weakens the strength of the Fe-C bond when the *CO intermediate adsorbs on edge-hosted Fe-N 4 , thus boosting the CO desorption and evolution rates. These findings suggest that engineering local support structure renders a way to design high-performance single-atom catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical CO2 Reduction over Metal-/Nitrogen-Doped Graphene Single-Atom Catalysts Modeled Using the Grand-Canonical Density Functional Theory

Renewably driven, electrochemical conversion of carbon dioxide into value-added products is expected to be a critical tool in global decarbonization. However, theoretical studies based on the computational hydrogen electrode largely ignore the nonlinear effects of the applied potential on the calculated results, leading to inaccurate predictions of catalytic behavior or mechanistic pathways. Here, we use grand canonical density functional theory (GC-DFT) to model electrochemical CO2 reduction (CO2R) over metal- and nitrogen-doped graphene catalysts (MNCs) and explicitly include the effects of the applied potential. We used GC-DFT to compute the CO2 to CO reaction intermediate energies at -0.3, -0.7, and -1.2 VSHE catalyzed by MNCs each doped with 1 of the 10 3d block metals coordinated by four pyridinic nitrogen atoms. Our results predict that Sc-, Ti-, Co-, Cu-, and Zn-N4Cs effectively catalyze CO2R at moderate to large reducing potentials (-0.7 to -1.2 VSHE). ZnN4C is a particularly promising electrocatalyst for CO2R to CO both at low and moderate applied potentials based on our thermodynamic analysis. Our findings also explain the observed pH independence of CO production over FeN4C and predict that the rate-determining step of CO2R over FeN4C is not *CO2- formation but rather *CO desorption. Additionally, the GC-DFT-computed density of states analysis illustrates how the electronic states of MNCs and adsorbates change non-uniformly with applied potential, resulting in a significantly increased *CO2- stability relative to other intermediates and demonstrating that the formation of the adsorbed *CO2- anion is critical to CO2R activation. This work demonstrates how GC-DFT paves the way for physically realistic and accurate theoretical simulations of reacting electrochemical systems.

CO2 reduction↗

Mechanistic Insights into Nonoxidative Ethanol Dehydrogenation on NiCu Single-Atom Alloys

Ethanol dehydrogenation presents a promising pathway towards the production of acetaldehyde, a valuable building block in chemicals production. Under non-oxidative conditions, the reaction is facilitated by supported Cu nanoparticles which afford reasonable activity and high selectivity. The stability issues associated with Cu nanoparticle sintering can be addressed by the addition of small amounts of Ni, which further boost reactivity while retaining selectivity. Despite the promise of NiCu single-atom alloys for non-oxidative ethanol dehydrogenation, little is known about the role of each component and the pathway of this mechanistically complex process. Herein, kinetic investigations from reactor tests identify C-H bond scission as the rate limiting step, while 1-hydroxyethyl is detected as the intermediate via IR spectroscopy. Temperature program desorption studies are employed to examine the effect of Ni coverage and to demonstrate that Ni atoms activate ethanol selectively at lower temperatures, resulting in higher acetaldehyde yield than pure Cu. Temperature program desorption experiments also reveal the spillover of intermediates from the Ni atom to neighboring Cu sites as a relevant step in the reaction pathway. Density functional theory calculations are used to investigate the 2 reaction energetics and to confirm that C-H bond scission is the initial reaction step, while a clear effect of H 2 partial pressure on the reaction pathway is realized. Further, counter to the expected behavior that all reaction steps take place on the Ni atoms, our degree of rate control analysis reveals that a mechanism involving spillover of the 1-hydroxyethyl intermediate from the Ni atom to the Cu surface, where it will dehydrogenate further, is more likely. Furthermore, our combined kinetic, spectroscopic, and theoretical approach sheds light on this complex reaction mechanism and represents a promising method for the understanding and designing of highly active, selective, and stable single-atom alloys for other multistep catalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plasmon-Driven Ammonia Decomposition on Pd(111): Hole Transfer’s Role in Changing Rate-Limiting Steps

Here, ammonia (NH 3 ) has the potential to be a hydrogen carrier because it can be transported and stored with ease, but only if it also can be decomposed easily when needed. Understanding how to control the frequently rate-limiting N–H bond breaking and N–N bond forming on catalytic surfaces may help design efficient means for NH 3 decomposition. Yuan et al. recently demonstrated photocatalytically selective N–H bond breaking in NH 3 on plasmon-driven aluminum–palladium (Al–Pd) antenna–reactor heterostructures. Using embedded correlated wavefunction (ECW) theory, we predict that the rate-determining step (RDS) for NH 3 decomposition on Pd(111) via thermocatalysis (dissociating the first N–H bond, *NH 3 → *NH 2 + *H, in the ground state, where * means adsorbed) differs from that via photocatalysis (dissociating the second N–H bond, *NH 2 → *NH + *H, in the excited state). This result is consistent with the measured catalytic efficiency and selectivity of NH 3 -deuterium (D 2 ) exchange reactions (an indirect way to measure N–H bond breaking) on Al–Pd heterodimers. We also determine the origin of the observed selectivity of thermocatalysis and photocatalysis on Pd(111) toward doubly deuterated (NHD 2 ) and monodeuterated (NH 2 D) products, respectively, and explore viability of the full NH 3 decomposition path, also via ECW theory. Additionally, we predict that the associative desorption of *N as N 2 from Pd(111) is extremely difficult in thermocatalysis at least at low surface coverages; metal-to-adsorbate hole transfer in photocatalysis stabilizes the transition state for the first N–H bond dissociation, shifting the RDS to the second N–H bond breaking. Furthermore, the redistribution of electrons around *N upon excitation reduces the electron density in the Pd–N bonds, which may lower the barrier for N 2 associative desorption in photocatalysis. Thus, light-induced, plasmon-mediated, excited-state hole transfer may provide an efficient mechanism to accelerate NH 3 decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Investigation into the Effects of Mn Promotion on the Activity and Selectivity of Co/SiO 2 for Fischer - Tropsch Synthesis: Evidence for Enhanced CO Adsorption and Dissociation

Mn is an effective promoter for improving the activity and selectivity of Co-based Fischer-Tropsch synthesis (FTS) catalysts, but the mechanism by which this promoter functions is poorly understood. The work reported here was aimed at defining the manner in which Mn interacts with Co and determining how these interactions affect the activity and selectivity of Co. Detailed measurements are reported for the kinetics of FTS as a function of Mn/Co ratio, temperature, and reactant partial pressure. These data are described by a single, two-parameter rate expression. Mn promotion was found to increase both the apparent rate constant for CO consumption and the CO adsorption constant. Further evidence for enhanced CO adsorption and dissociation was obtained from measurements of temperature-programmed desorption of CO and CO disproportionation rates, respectively. Our quantitative analysis of elemental maps obtained by STEM-EDS revealed that the promoter accumulates preferentially on the surface of Co nanoparticles at low Mn loadings, resulting in a rapid onset of improvements in the product selectivity as the Mn loading increases. For catalysts prepared with loadings higher than Mn/Co = 0.1, the additional Mn accumulates in the form of nanometer-scale particles of MnO on the support. In situ IR spectra of adsorbed CO show that Mn promotion increases the abundance of adsorbed CO with weakened C-O bonds. Furthermore, it is proposed that the cleavage of the C-O bond is promoted through Lewis acid-base interactions between the Mn 2+ cations located at the edges of MnO islands covering the Co nanoparticles and the O atom of CO adsorbates adjacent to the MnO islands. The observed decrease in selectivity to CH 4 and the increased selectivity to C 5+ products with increasing Mn/Co ratio are attributed to a decrease in the ratio of adsorbed H to CO on the surface of the supported Co nanoparticles.

Johnson, Gregory R.↗

Structure–Activity Relationships for Ethanol Dehydrogenation to Acetaldehyde by Silica-Supported Zinc Oxide Catalysts

Silica-supported ZnO efficiently catalyzes the nonoxidative dehydrogenation of ethanol to acetaldehyde, which is relevant for production of 1,3-butadiene from bioethanol. Characterization with in situ spectroscopies under dehydrated conditions (high sensitivity-low energy ion scattering (HS-LEIS), diffuse reflectance (DR) UV–vis, X-ray absorption spectroscopy (XAS), diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS), inelastic neutron scattering (INS), and UV Raman), and ammonia adsorption probed by temperature-programmed desorption followed by DRIFTS and mass spectrometry (DRIFTS-MS NH 3 -TPD), and DFT calculations revealed that the supported ZnO x phase was present as isolated surface ZnO x sites on SiO 2 , with the vast majority coordinated by two siloxane bonds and one silicon atom with two nonbridging oxygens ((≡SiO) 2 Zn 2+ O 2 Si=), anchored at 4-, 5-, and 6-membered siloxane rings. A minor fraction of surface ZnO x sites possessed Lewis acidity, and even fewer sites possessed a Bro̷nsted acidic Zn(OH) + Si moiety. Ethanol temperature-programmed surface reaction-mass spectrometry (TPSR-MS) with various oxidative or ethanol reaction pretreatments indicated that only sites with Lewis and Bro̷nsted acidic character (Zn(OH) + Si) were active for ethanol dehydrogenation, while the majority surface (≡SiO) 2 Zn 2+ O 2 Si= sites were inactive. Greater heterogeneity among all surface ZnO x sites, as assessed by in situ DR UV–vis spectroscopy, was associated with a greater number of ZnO x sites that were active for ethanol dehydrogenation as well as lower enthalpic barriers for acetaldehyde production among the most active surface ZnO x sites. Turnover frequencies and the apparent activation energy for ethanol dehydrogenation were determined from steady-state kinetics. Together, these findings suggested that anchoring inactive surface (≡SiO) 2 Zn 2+ O 2 Si= sites on the silica support caused a greater number of active surface ZnO x sites to adopt a more strained configuration, promoting ethanol dehydrogenation catalysis. Pretreatments and catalysts that promoted desorption of ethanol during TPSR, taken as a marker of surface dehydroxylation, were associated with an increased number of the most active surface (Zn(OH) + Si) sites. Such findings suggested that inactive surface ZnO x sites were activated for ethanol dehydrogenation by dehydroxylation of the support and/or decreased coordination to hemilabile siloxane ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactivity of Hydrogen on and in Nanostructured Molybdenum Nitride: Crotonaldehyde Hydrogenation

Early-transition-metal nitrides, including γ-Mo 2 N, are active and selective for a variety of reactions, including the hydrogenation of organics (e.g., hydrodeoxygenation), CO (e.g., Fischer–Tropsch synthesis), and CO 2 . In addition to adsorbing hydrogen onto the surface, some of these materials can incorporate hydrogen into subsurface, interstitial sites. Research described in this paper examined, experimentally and computationally, the nature of hydrogen on and in γ-Mo 2 N, with a particular focus on characterizing the interactions of these hydrogens with crotonaldehyde. Hydrogen was added to γ-Mo 2 N via exposure to gaseous hydrogen at elevated temperatures, forming γ-Mo 2 N-H x , where 0.061< x < 0.082. Temperature-programmed desorption (TPD) experiments indicate that γ-Mo 2 N-H x has at least two distinct hydrogen binding sites and that these sites can be selectively populated. Inelastic neutron scattering and density functional theory calculations indicate the presence of surface nitrogen-bound (κ 1 -NH surf ), surface Mo-bound (κ 1 -MoHsurf), and interstitial Mo-bound (μ 6 -Mo 6 H sub ) hydrogens. Selectivities for the hydrogenation of crotonaldehyde, a model of species in biomass-derived liquids, correlated with the populations at these sites. Importantly, materials with high densities of interstitial, hydridic hydrogen were selective for C=O hydrogenation (i.e., formation of crotyl alcohol). Collectively the results provide mechanistic insights regarding the desorption and reactivity of hydrogen on and in γ-Mo 2 N. Hydrogen adsorption/desorption to γ-Mo 2 N is heterolytic; in particular, H 2 adds across a Mo–N bond. Because the surface Mo–H site is energetically unfavorable in comparison to the interstitial site, hydrogen migrates into interstitial sites once the surface NH sites are saturated. Crotonaldehyde adsorption facilitates migration of this interstitial hydrogen back to the surface, forming surface Mo–H that is selective for hydrogenation of the C=O bond. These insights will facilitate the design of γ-Mo 2 N and other early-transition-metal nitrides for catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactivity of a Carbon-Supported Single-Site Molybdenum Dioxo Catalyst for Biodiesel Synthesis

A single-site molybdenum dioxo catalyst, (O c ) 2 Mo(=O)2@C, was prepared via direct grafting of MoO 2 Cl 2 (dme) (dme = 1,2-dimethoxyethane) on high-surface-area activated carbon. The physicochemical and chemical properties of this catalyst were fully characterized by N 2 physisorption, ICP-AES/OES, PXRD, STEM, XPS, XAS, temperature-programmed reduction with H 2 (TPR-H 2 ), and temperature-programmed NH 3 desorption (TPD-NH 3 ). The single-site nature of the Mo species is corroborated by XPS and TPR-H2 data, and it exhibits the lowest reported MoO x T max of reduction reported to date, suggesting a highly reactive Mo VI center. (O c ) 2 Mo(=O) 2 @C catalyzes the transesterification of a variety of esters and triglycerides with ethanol, exhibiting high activity at moderate temperatures (60–90 °C) and with negligible deactivation. (O c ) 2 Mo(=O) 2 @C is resistant to water and can be recycled at least three times with no loss of activity. The transesterification reaction is determined experimentally to be first order in [ethanol] and first order in [Mo] with ΔH ‡ = 10.5(8) kcal mol –1 and ΔS ‡ = –32(2) eu. Here, the low energy of activation is consistent with the moderate conditions needed to achieve rapid turnover. This highly active carbon-supported single-site molybdenum dioxo species is thus an efficient, robust, and low-cost catalyst with significant potential for transesterification processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chasing the Achilles’ Heel in Hybrid Systems of Diruthenium Water Oxidation Catalysts Anchored on Indium Tin Oxide: The Stability of the Anchor

The development of hybrid devices for photo-driven water oxidation with dinuclear molecular ruthenium catalysts on solid supports aims both at high efficiencies of the catalyst and at high stability of the linking to the surface. We herein report a systematic study regarding the stability of catalysts anchored on an indium tin oxide (ITO) support via different acid functional groups at the ligand backbone: viz., a single carboxylate anchor, two carboxylate anchors, and a phosphonate anchor. The integrity of the hybrid electrodes ITO|mesoITO|catalyst was evaluated under acidic aqueous conditions as a function of the applied electric potential below and above the onset of the oxygen evolution reaction (OER). Rotating ring disk electrode (RRDE) experiments allowed us to distinguish between the water oxidation and the desorption processes. X-ray photoemission (XPS) and X-ray absorption spectroscopy (XAS) after electrochemical treatment showed high chemical stability of the catalyst core structure but pronounced dependence of the hybrid stability on the oxidation state of the ruthenium center. A combination of these different spectroscopic techniques shed light on the mechanisms underlying catalyst desorption. Specifically, catalysts equipped with carboxylate anchors are found to continuously desorb already at low applied potentials below the OER onset, while for the more rugged phosphonate-based hybrid oxidative P–C(aryl) bond cleavage is proposed to occur, but only after reaching the high-valent Ru V Ru IV state. These findings reveal specific challenges for anchoring strategies in molecular water oxidation catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accelerated Cu2O Reduction by Single Pt Atoms at the Metal-Oxide Interface§

The reducibility of metal oxides, when serving as the catalyst support or the active sites themselves, plays an important role in heterogeneous catalytic reactions. Here we present an integrated experimental and theoretical study that reveals how the addition of small amounts of atomically dispersed Pt at the metal/oxide interface dramatically enhances the reducibility of a Cu2O thin film by H2. X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption (TPD) results reveal that upon oxidation, a PtCu single-atom alloy (SAA) surface is covered by a thin Cu2O film and is therefore unable to dissociate H2. Despite this, in situ studies using ambient pressure (AP) XPS reveal that the presence of a small amount of Pt under the oxide layer can, at the single-atom limit, promote the reduction of Cu2O by H2 at room temperature. We build two density functional theory based surface models to better understand these experimental findings: A Cu2O/Cu(111)-like surface oxide layer, known as the ‘29’ oxide, in which Pt is alloyed into the Cu(111) surface as well as a PtCu SAA. Our calculations suggest that the increased activity is due to the presence of atomically dispersed Pt under the surface oxide layer, which weakens the Cu-O bonds in its immediate vicinity, thus making the interface between subsurface Pt and the surface oxide a nucleation site for the formation of metallic Cu. This initial step in the reduction process results in the presence of surface Pt atoms surrounded by metallic Cu patches, and the Pt atoms become active in H2 dissociation, which consequently accelerates the reduction of the oxide layer. This work demonstrates how isolated Pt atoms at the metal/oxide interface of a Cu-based catalyst accelerate the reduction of the oxide and, therefore, helps maintain the active, reduced state of the catalyst under reaction conditions, as is required for the synthesis of methanol from CO2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanovoid Incorporated IrxCu Metallic Aerogels for Oxygen Evolution Reaction Catalysis

Ir-based nanomaterials are regarded as state-of-the-art cathode electrocatalysts in proton exchange membrane water electrolyzers (PEMWEs). Engineering the morphology of Ir-based three-dimensional architectures as electrocatalysts toward oxygen evolution reaction (OER) has been rarely studied. Here, we report the gelation of IrxCu metallic hydrogels self-assembled with ultrafine and nanovoid incorporated building blocks for enhancing the electrocatalytic performance toward OER. The composition-optimized Ir3Cu metallic aerogels exhibited improved catalytic activity and durability toward OER. The mesosized voids generated through the in situ galvanic replacement reaction and the macrosized porous systems make a great contribution to the increased number of active sites. First-principle calculations revealed the intrinsic optimized binding energy of Ir by alloying with Cu. The best catalytic performance necessities a balance of the adsorption and desorption energy. The well-defined morphology and enhanced OER electrochemical performances of nanovoid incorporated IrxCu metallic aerogels hold great promise in further applications in PEMWEs.

Shi, Qiurong↗

Nanoconfinement of Molecular Magnesium Borohydride Captured in a Bipyridine-Functionalized Metal-Organic Framework

The lower limit of metal hydride nanoconfinement is demonstrated through the coordination of a molecular hydride species to binding sites inside the pores of a metal-organic framework (MOF). Magnesium borohydride, which has a high hydrogen capacity, is incorporated into the pores of UiO-67bpy (Zr6O4(OH)4(bpydc)6 with bpydc2- = 2,2'-bipyridine-5,5'- dicarboxylate) by solvent impregnation. The MOF retained its long-range order, and transmission electron microscopy and elemental mapping confirmed the retention of the crystal morphology and revealed a homogeneous distribution of the hydride within the MOF host. Notably, the B-, N-, and Mg-edge XAS data confirm the coordination of Mg(II) to the N atoms of the chelating bipyridine groups. In situ 11B MAS NMR studies helped elucidate the reaction mechanism and revealed that complete hydrogen release from Mg(BH4)2 occurs as low as 200 °C. Sieverts and thermogravimetric measurements indicate an increase in the rate of hydrogen release, with the onset of hydrogen desorption as low as 120 °C, which is approximately 150 °C lower than that of the bulk material. Furthermore, density functional theory calculations support the improved dehydrogenation properties and confirm the drastically lower activation energy for B-H bond dissociation.

Nanoconfinement, Metal Hydrides, Metal-Organic Fra↗

Feasibility of Metal Oxide Glasses and Polymer Membranes as Sorbents for Gaseous Oxidized Mercury

Mass spectrometry methods are currently under development by the atmospheric mercury (Hg) research community to elucidate the identity of atmospheric oxidized mercury (Hg II ) compounds. Due to high instrument detection limits, materials that can quantitatively preconcentrate atmospheric Hg II without facilitating compound-altering chemical reactions are needed to support these methods. Cation exchange membranes (CEM) and nylon membranes are currently used to preconcentrate ambient Hg II for concentration measurements and Hg II compound estimation, respectively. However, CEM and nylon membranes are poor candidates for observations by mass spectrometry methods due to release of interfering compounds upon heating; glasses do not have this problem. Here, three metal oxide glasses were explored as potential alternatives for Hg II preconcentration for future use with mass spectrometry methods: calcium phosphate (CaP), iron phosphate (FeP), and calcium aluminate (CaAl). The glasses demonstrated quantitative selective capture of HgBr 2 without capture of Hg 0 . Under ambient conditions, the CaP, FeP, and CaAl sorbed 36.4 ± 12.6% of the total HgII as the CEM. However, when Hg concentrations were normalized to surface area, CaP, FeP, and CaAl sorbed more HgBr 2 in the laboratory and ambient HgII compared to CEM. The CEM and CaP retained similar concentrations of HgBr 2 when preloaded samples were deployed in the field. Additionally, a permeation tube-based calibrator was used to load sorbents with HgBr 2 for investigation of HgII retention on CEM and thermal desorption profile changes on nylon membranes during active sampling. Nylon membranes were purchased from three vendors and used to compare HgBr 2 retention; a different HgBr 2 thermal desorption profile was achieved for each vendor’s nylon membrane.

Amides↗

Capacitive Deionization for the Extraction and Recovery of Butyrate

Separation processes underpin chemical manufacturing, energy and fuel production, resource recovery, and water purification. Capacitive deionization (CDI) is an electrochemical separation technique based on electrosorption of charged species from an aqueous solution. This work reports the development and application of CDI for the extraction and recovery of butyrate, a carboxylate anion that is key to bioenergy production, among other applications. Electrosorption of sodium butyrate was evaluated using a bench-scale CDI system with activated carbon cloth electrodes. Applying an external potential (1.2 V) enhanced the adsorption capacity of activated carbon for butyrate by 250%. Reversible electrosorption was also demonstrated by extracting and recovering butyrate at 1.2 and 0 V, respectively. Performance metrics including butyrate adsorption and desorption capacities, adsorption and desorption rates, charge efficiency, energy consumption, and recovery are reported. Furthermore, this study also investigates the long-term operational stability of the system by cycling the cell more than 1000 times using 1.2 and 0 V for charging and discharging, respectively. Subsequent physicochemical characterization indicates increased oxygen content (from similar to 2% to >8%), decreased specific surface area (by similar to 20%), and decreased pore volume (by similar to 20%), attributed to carbon oxidation. Overall, this work informs the design of CDI for organic anion separation and recovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗