Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “conversion efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

An intelligent energy router for managing behind-the-meter resources and assets

With increase in distributed energy resources (DERs) and smart loads, each energy resource and load need a separate power conversion system leading to complex coordination and interaction, reduced energy conversion efficiency, coordinating compliance to grid standards (IEEE 1547) from multiple sources, reduced security. Also, multiple vendors with legacy system designs and proprietary communications interfaces result in redundancy and increase in cost of power electronics systems. This paper presents an energy router concept for buildings applications which provides autonomous power flow between sources and loads with a novel agent-based software interface.

Chinthavali, Madhu Sudhan↗
DOE OSTI2022

Self-Aligned Selective Area Front Contacts on Poly -Si/SiO x Passivating Contact c -Si Solar Cells

We report both polarity poly-Si/SiO x passivating contacts in a front/back device configuration may represent the next solar cell architecture after tunnel oxide passivating contacts (TOPCon) cells, but high parasitic absorption in the front poly -Si layer often limits its performance. This work explores a wet etching technique to remove the front poly -Si in the nonmetallized regions using self-aligned metal grids as an etch mask. We systematically examine various dielectric layers (SiN x ,Al 2 O 3 , and stacks thereof) to study the repassivation of the etched n + surface, and find that an SiN x /Al 2 O 3 passivation stack can effectively repassivate the etched surface, which we attribute to field-effect passivation from the positive fixed charge from the SiN x layer, and excellent chemical passivation property from Al 2 O 3 in the form of atomic H. We demonstrate a front/back poly-Si/SiO x passivating contact device, with an open-circuit voltage (V oc ) of 690 mV, short-circuit current density (J sc ) of 39.8 mA/cm 2 , fill factor of 78%, and power conversion efficiency of 21.4%. Furthermore, simulations using SunSolve and Quokka 3 show good agreement with both the optical and electrical properties of the experimental device. The power loss analysis reveals improvements in the optical loss from the back Ti adhesion and front SiN x layers would lead to a 23.5% device. Lastly, a techno-economic model compares the production cost of this improved cell with the current TOPCon cells. Our results highlight that further cost reductions in single-sided doped poly -Si layers are needed to compete with mainstream passivated emitter and rear cell, and TOPCon technologies.

14 SOLAR ENERGY↗
DOE OSTI2024

Development of an Optical Library for Coevaporated CdSe x Te 1– x

The conversion efficiency of CdTe solar cells may be improved by bandgap engineering, i.e., changing the bandgap value through the addition of Se in the absorber. The Se alloying enables a short-circuit current density improvement, as it leads to a bandgap energy value decrease. Furthermore, it has been associated with increased minority carrier lifetimes, assuring high open-circuit voltage values. An Se gradient profile control can further optimize the solar cell performance. Thus, an optical model baseline of the CdSe x Te 1–x (CST) compound was developed. Spectroscopic ellipsometry measurements were conducted to accurately extract the optical constants of ten CST layers deposited through coevaporation with x varying from 0 to 1. Using the measured dielectric function spectra from the discrete CST layers with varying x, and considering the composition-induced shift in the critical point energies, an energy-shift model was employed to develop the accurate optical library for the CST compound for any x value to provide data for future modeling and optimization. Furthermore, the library accuracy was validated through optical simulations of the quantum efficiency of a graded CST solar cell using the finite-difference time-domain method by replicating the Se profile in the absorber layer measured through secondary ion mass spectrometry.

14 SOLAR ENERGY↗
DOE OSTI2020

Three-Terminal Bipolar Junction Bottom Cell as Simple as PERC: Towards Lean Tandem Cell Processing

Silicon-based tandem cells are a potential upgrade for the dominating PERC technology and can greatly increase the conversion efficiency. A novel approach, the three-terminal (3T) tandem using interdigitated back-contact (IBC) cells, was shown to combine the advantages of four- and two-terminal tandem cells at the expense of a more complex bottom cell fabrication process. In this paper, we propose a simplified and lean PERC-like 3T bipolar junction bottom cell featuring two minority-carrier selective contacts and a single majority-carrier selective contact, and thus resembling a bipolar junction transistor architecture. We present the lean PERC-like fabrication process and explain the working principle by using current-voltage measurements of illuminated 3T IBC cells.

14 SOLAR ENERGY↗
DOE OSTI2020

Combinatorial Study of MZO Emitters for CdTe-Based Solar Cells

Precise band alignment at the front interface of CdTe-based solar cells is necessary to reduce photoexcited charge carrier recombination and to enable higher energy conversion efficiencies. Magnesium zinc oxide is not only transparent but also offers the ability to tune the conduction band offset with CdTe at the front of the device stack. In this work, we describe reactive sputtering of Mg 1-x Zn x O using metal targets and its application in CdTe photovoltaics. Combinatorial libraries of Mg 1-x Zn x O were created to tune the conduction band alignment for the optimal performance of CdTe solar cells. Band gap variation of more than 0.4 eV is achieved across a 3-inch substrate. Kelvin probe measurements demonstrate variance of work function across the substrate. Device performance is optimized at band gaps of 3.5 eV for the CdTe device processing conditions employed in this study.

14 SOLAR ENERGY↗
DOE OSTI2021

High-Photovoltage All-Perovskite Tandem Solar Cells for Photovoltaic-Electrolysis Water-Splitting Applications

Monolithic perovskite/perovskite tandem solar cells have attracted substantial attention owing to their promise for high power conversion efficiency (PCE) and low fabrication cost. Conventional all-perovskite tandem solar cells employ a mixed tin (Sn)-lead (Pb) low-bandgap subcell, which suffers from instability issues in the ambient air. Here, we fabricate two-terminal perovskite/perovskite tandem solar cells consisting of two solution-processed perovskite subcells based on the more airstable pure Pb-based perovskites. The champion perovskite tandem cell exhibits a PCE of 19.2% with a high open-circuit voltage of 2.15 V. We further demonstrate photovoltaicelectrolysis (PV-EC) water-splitting applications using these high-photovoltage all-perovskite tandem solar cells.

metal halide perovskite↗
DOE OSTI2021

Structural Stability of Tin-Lead Halide Perovskite Solar Cells

One of the key features that makes halide perovskite solar cells such an attractive and intensely researched photovoltaic (PV) technology, is the tunability of the bandgap of these halide perovskite materials [1], [2]. Shortly after it was established that the bandgap could be increased to 1.7-1.8 eV, investigations into the application for silicon based tandem solar cells launched. Within a few years, conversion efficiencies of up to 28 % have been reported [3]. Concurrently, the interest in commercial application of this technology emerged and have rapidly increased. Whereas there are advantages to piggy backing on an established PV technology such as silicon, efforts to develop all-perovskite tandem solar cells are of considerable interest. Partly substituting the metal cation in the ABX3 perovskite enables the low bandgap absorbers required for an all-perovskite tandem solar cell. One common approach is to partially substitute the lead with tin, however these materials often suffered from poor stability. Therefore the development of an efficient, stable mixed tin-lead perovskite is key to enabling all-perovskite tandem solar cells.

degradation↗
DOE OSTI2023

Luminescence and Thermal Imaging Applied to Half-Cut-Cell and Emitter-Wrap-Through-Cell Modules

Imaging techniques provide spatial details and visualization of module defects and degradation mechanisms that affect energy conversion efficiency and performance. We apply photoluminescence, electroluminescence, and dark lock-in thermography imaging techniques to evaluate new modules in their initial state and after applying stresses of damp heat, light-induced-degradation regeneration parameters, thermal cycling, and humidity-freeze cycles. One module uses emitter-wrap-through cells with back contacts connected to a metal-foil backplane, and the other is composed of half-cut cells. Imaging shows examples on non-uniform degradation and damage such as cells that degrade and recover under the applied conditions, cells with cracks and handling damage, and cells with increasing series resistance.

degradation↗
DOE OSTI2024

Characterization of n-Type Iodine-Doped and Indium-Doped CdTe/Cd-Se-Te Thin Films Fabricated by Close-Spaced Sublimation Epitaxy

In this study, n-type CdTe thin films, specifically iodine-doped CdTe (CdTe:I), indium-doped CdTe (CdTe:In), and indium-doped Cd-Se-Te (CST:In), were synthesized using close-spaced sublimation epitaxy (CSSE). Characterization techniques secondary ion mass spectrometry (SIMS), electron backscatter diffraction (EBSD), Hall-effect measurements, and time-resolved photoluminescence (TRPL) were employed to analyze the chemical, structural, and electronic properties of these materials. The results indicated epitaxial single crystal CSSE films grew on the single crystal substrates, with carrier density ranging from 10^14 - 10^16 cm -3 , and after post-annealing, the minority-carrier lifetimes reach near the radiative limit. Additionally, a preliminary exploration of homojunction structures with an n- type (CdTe:In /CST:In /CdTe:I) /CdTe:P /Cu /Mo configuration was performed. The best device performance was achieved with CdTe:I including CdS aiding in band alignment, resulting in a power conversion efficiency (..eta..) of 2.61% with open circuit voltage (Voc) of 850 mV, fill factor (FF) of 47.8%, and short-circuit current (Jsc) of 6.44 mA/cm 2 . The observed low Jsc and efficiency may be attributed to a buried junction and a poor interface, due to dopant interdiffusion. Consequently, further investigations focusing on interface optimization, diffusion blocking, and reduced recombination through passivation, are crucial to enhancing the efficiency of CSSE CdTe homojunction devices in the future.

cadmium compounds↗
DOE OSTI2021

Growth of High-Performance 4-5μm Thick Film REBCO Tapes Doped With Hafnium Using Advanced MOCVD

Advanced metal organic chemical vapor deposition technique (A-MOCVD) was used to grow 4-5 µm thick REBa 2 Cu 3 O 7–δ (REBCO, RE = rare earth) films, doped with 5% and 15% Hf. Thick REBCO films doped with 5% Hf exhibit self-field critical current density (J c ) over 1.8 MA/cm 2 at 77 K and 3 MA/cm 2 at 65 K, 1.5 T. Increasing the Hf content to 15% resulted in J c above 9 MA/cm 2 at 20 K, 9 T. The effect of (Ba+Hf)/Cu content in Hf-added (5 and 15 mol.%) REBCO films on the critical current density at 77 K, 0 T, c-axis lattice parameter and out-of- plane texture has been studied. In addition to growth of thick film REBCO tapes with superior performance, the A-MOCVD reactor has been used to quadruple the precursor-to-film conversion efficiency above 45%. Furthermore, this achievement has a first order impact in lowering the cost of REBCO tapes made by A-MOCVD.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Lipid–enhanced Oilcane does not impact soil carbon dynamics compared with wild–type Sugarcane

The carbon neutral potential of bioenergy relies in part on the ability of feedstocks to sequester carbon (C) in the soil. Sugarcane is one of the most widely used bioenergy crops, yet there remain unknowns about how it impacts soil C dynamics. In addition, Oilcane, a genetically modified version of Sugarcane has been produced to accumulate more energy-dense oils and less soluble lignin, which enhances conversion efficiency but may also impact soil C cycling. Thus, our objectives were to examine the impact of Sugarcane litter decomposition on soil C formation and losses and determine if the genetic modifications to produce Oilcane alter these dynamics. To do this, we incubated bagasse (processed stem litter) and leaf litter from Sugarcane and Oilcane in microcosms with forest soil for 11 weeks. We used differences in natural abundance δ 13 C between C 3 forest soil and C 4 litter to trace the fate of the litter into respiratory losses as well as stable and unstable soil C pools. Our results show that genetic modifications to Oilcane did not substantially alter soil C dynamics. Sugarcane and Oilcane litter both led to net soil C gains dominated by an accumulation of the added litter as unstable, particulate organic C (POC). Oilcane litter led to small but significantly greater net soil C gains than Sugarcane litter due to greater POC formation, but the formation of stable, mineral associated organic matter (MAOC) did not differ between crop types. Sugarcane and Oilcane had opposing effects on tissue type where Sugarcane bagasse formed more MAOC, while Oilcane leaves preferentially remained as POC which may have important management implications. These results suggest that genetic modifications to Sugarcane will not significantly impact soil C dynamics; however, this may not be universal to other crops particularly if modifications lead to greater differences in litter chemistry.

09 BIOMASS FUELS↗
DOE OSTI2022

Increased bundle‐sheath leakiness of CO 2 during photosynthetic induction shows a lack of coordination between the C 4 and C 3 cycles

Summary Use of a complete dynamic model of NADP‐malic enzyme C 4 photosynthesis indicated that, during transitions from dark or shade to high light, induction of the C 4 pathway was more rapid than that of C 3 , resulting in a predicted transient increase in bundle‐sheath CO 2 leakiness ( ϕ ). Previously, ϕ has been measured at steady state; here we developed a new method, coupling a tunable diode laser absorption spectroscope with a gas‐exchange system to track ϕ in sorghum and maize through the nonsteady‐state condition of photosynthetic induction. In both species, ϕ showed a transient increase to > 0.35 before declining to a steady state of 0.2 by 1500 s after illumination. Average ϕ was 60% higher than at steady state over the first 600 s of induction and 30% higher over the first 1500 s. The transient increase in ϕ , which was consistent with model prediction, indicated that capacity to assimilate CO 2 into the C 3 cycle in the bundle sheath failed to keep pace with the rate of dicarboxylate delivery by the C 4 cycle. Because nonsteady‐state light conditions are the norm in field canopies, the results suggest that ϕ in these major crops in the field is significantly higher and energy conversion efficiency lower than previous measured values under steady‐state conditions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Towards a dynamic photosynthesis model to guide yield improvement in C4 crops

Summary The most productive C4 food and biofuel crops, such as Saccharum officinarum (sugarcane), Sorghum bicolor (sorghum) and Zea mays (maize), all use NADP‐ME‐type C4 photosynthesis. Despite high productivities, these crops fall well short of the theoretical maximum solar conversion efficiency of 6%. Understanding the basis of these inefficiencies is key for bioengineering and breeding strategies to increase the sustainable productivity of these major C4 crops. Photosynthesis is studied predominantly at steady state in saturating light. In field stands of these crops light is continually changing, and often with rapid fluctuations. Although light may change in a second, the adjustment of photosynthesis may take many minutes, leading to inefficiencies. We measured the rates of CO 2 uptake and stomatal conductance of maize, sorghum and sugarcane under fluctuating light regimes. The gas exchange results were combined with a new dynamic photosynthesis model to infer the limiting factors under non‐steady‐state conditions. The dynamic photosynthesis model was developed from an existing C4 metabolic model for maize and extended to include: (i) post‐translational regulation of key photosynthetic enzymes and their temperature responses; (ii) dynamic stomatal conductance; and (iii) leaf energy balance. Testing the model outputs against measured rates of leaf CO 2 uptake and stomatal conductance in the three C4 crops indicated that Rubisco activase, the pyruvate phosphate dikinase regulatory protein and stomatal conductance are the major limitations to the efficiency of NADP‐ME‐type C4 photosynthesis during dark‐to‐high light transitions. We propose that the level of influence of these limiting factors make them targets for bioengineering the improved photosynthetic efficiency of these key crops.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Biochemical characterization of xyloglucan galactosyltransferases MUR3 and XLT2 from Spirodela polyrhiza

Glycosyltransferases (GTs) are the primary enzymes responsible for the biosynthesis of the complex polysaccharides in plant cell walls. Given the important role of GTs in plants, it is necessary to undertake their functional characterization to better understand plant cell wall synthesis pathways to develop improved feedstocks for efficient conversion into fuels and products to support the emerging bioeconomy. The GT47 family in plants represents a unique target for characterization due to the substantial diversity of donor and acceptor substrates observed within a single family. Here, we have carried out the biochemical characterization of MUR3 and XLT2 orthologs from the aquatic monocot Spirodela polyrhiza. Our findings support existing genetic and phylogenetic data classifying these enzymes as regio-specific galactosyltransferases involved in xyloglucan (XyG) sidechain biosynthesis. In addition, we have identified novel characteristics for both enzymes, such as in vitro arabinopyranosyltransferase activity and distinctiveness in xyloglucan reducing end specificity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Analysis of a Fluidized-Bed Particle/Supercritical-CO2 Heat Exchanger in a Concentrating Solar Power System

Concentrating solar power (CSP) development has focused on increasing the energy conversion efficiency and lowering the capital cost. To improve performance, CSP research is moving to high-temperature and high-efficiency designs. One technology approach is to use inexpensive, high-temperature heat transfer fluids and storage, integrated with a high-efficiency power cycle such as the supercritical carbon dioxide (sCO 2 ) Brayton power cycle. The sCO 2 Brayton power cycle has strong potential to achieve performance targets of 50% thermal-to-electric efficiency and dry cooling at an ambient temperature of up to 40 °C and to reduce the cost of power generation. Solid particles have been proposed as a possible high-temperature heat transfer or storage medium that is inexpensive and stable at high temperatures above 1000 °C. The particle/sCO 2 heat exchanger (HX) provides a connection between the particles and sCO 2 fluid in emerging sCO 2 power cycles. This article presents heat transfer modeling to analyze the particle/sCO 2 HX design and assess design tradeoffs including the HX cost. The heat transfer process was modeled based on a particle/sCO 2 counterflow configuration, and empirical heat transfer correlations for the fluidized bed and sCO 2 were used to calculate heat transfer area and estimate the HX cost. A computational fluid dynamics simulation was applied to characterize particle distribution and fluidization. This article shows a path to achieve the cost and performance objectives for a particle/sCO 2 HX design by using fluidized-bed technology.

14 SOLAR ENERGY↗
DOE OSTI2022

Artificial Intelligence for Power Electronics in Electric Vehicles: Challenges and Opportunities

We report progress in the field of power electronics within electric vehicles has generally been driven by conventional engineering design principles and experiential learning. Power electronics is inherently a multidomain field where semiconductor physics and electrical, thermal, and mechanical design knowledge converge to achieve a practical realization of desired targets in the form of conversion efficiency, power density, and reliability. Due to the promising nature of artificial intelligence in delivering rapid results, engineers are starting to explore the ways in which it can contribute to making power electronics more compact and reliable. Here, we conduct a brief review of the foray of artificial intelligence in three distinct subtechnologies within a power electronics system in the context of electric vehicles: semiconductor devices, power electronics module design and prognostics, and thermal management design. The intent is not to report an exhaustive literature review, but to identify the state of the art and opportunities for artificial intelligence to play a meaningful role in power electronics design from a mechanical and thermal standpoint, as well as to discuss a few promising future research directions.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Seamless aperture and length enlargement of single crystalline materials for high-energy laser applications

An optically seamless method for increasing the aperture or length of nonlinear materials has been developed, which is suitable for optics in high energy laser systems and other applications. Differences between aperture and length scaling are analyzed. Bonding of component pairs of a nonlinear crystal, lithium tri-borate, is experimentally demonstrated by GAMDAN Optics Inc. and tested at the Laboratory of Laser Energetics at the University of Rochester. Here, a bonded crystal is shown to deliver beam quality and second harmonic conversion efficiency that is equivalent to that of a monolithic crystal of similar dimensions.

aperture scaling↗
DOE OSTI2020

Low-frequency lattice phonons in halide perovskites explain high defect tolerance toward electron-hole recombination

Low-cost solution-based synthesis of metal halide perovskites (MHPs) invariably introduces defects in the system, which could form Shockley-Read-Hall (SRH) electron-hole recombination centers detrimental to solar conversion efficiency. Here, we investigate the nonradiative recombination processes due to native point defects in methylammonium lead halide (MAPbI 3 ) perovskites using ab initio nonadiabatic molecular dynamics within surface-hopping framework. Regardless of whether the defects introduce a shallow or deep band state, we find that charge recombination in MAPbI 3 is not enhanced, contrary to predictions from SRH theory. We demonstrate that this strong tolerance against defects, and hence the breakdown of SRH, arises because the photogenerated carriers are only coupled with low-frequency phonons and electron and hole states overlap weakly. Both factors appreciably decrease the nonadiabatic coupling. We argue that the soft nature of the inorganic lattice with small bulk modulus is key for defect tolerance, and hence, the findings are general to other MHPs.

Science & Technology - Other Topics↗