Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “consistency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Fracture of plates which consist of periodic dissimilar strips

In this paper the fracture problem of a composite plate which consists of perfectly bonded parallel load carrying laminates and buffer strips is considered. It is assumed that the fatigue cracks may appear and spread in main laminates or in buffer strips or in both perpendicular to the interfaces. The external load is applied to the plate parallel to the strips and away from the crack region. The problem is solved for fully imbedded cracks and for broken laminates or strips and the corresponding stress intensity factors are calculated.

Erdogan, F.↗
NASA NTRS1977

Self-consistent structure of metallic hydrogen

A calculation is presented of the total energy of metallic hydrogen for a family of face-centered tetragonal lattices carried out within the self-consistent phonon approximation. The energy of proton motion is large and proper inclusion of proton dynamics alters the structural dependence of the total energy, causing isotropic lattices to become favored. For the dynamic lattice the structural dependence of terms of third and higher order in the electron-proton interaction is greatly reduced from static lattice equivalents.

Straus, D. M.↗
NASA NTRS1977

A lunar density model consistent with topographic, gravitational, librational, and seismic data

A series of models of the lunar interior are derived from topographic, gravitational, librational, and seismic data. The librational parameters and low-degree gravity harmonics result primarily from surface height variations and only secondarily from lateral density variations. The moon departs from isostasy, even for the low-degree harmonics, with a maximum superisostatic stress of 200 bars under the major mascon basins. The mean crustal thicknesses under different physiographic regions are: mascons, 30-35 km; irregular maria, 50-60 km; and highlands, 90-110 km. A possible composition consistent with our model is an anorthositic crust, underlain by a predominantly forsterite upper mantle which grades into a refractory rich lower mantle surrounding a pyrrhotite core.

Bills, B. G.↗
NASA NTRS1977

Cluster calculation of carbon monoxide on a Cu surface using the self-consistent-field-X-alpha-scattered-wave method

Two geometries of CO chemisorbed on a Cu(100) surface have been studied using the self-consistent-field-X-alpha-scattered-wave method. Both geometries assume the CO molecule is bonded to the Cu surface with the C end down; one geometry is in the fourfold-symmetric hole site and one is directly on top of a Cu atom. The calculated valence density of states for the fourfold-symmetry case gives a satisfactory interpretation of the two main peaks below the copper d band in the UV photoemission spectra (UPS). A third weaker peak of the UPS data can be correlated with a CO molecule adsorbed directly on top of a copper atom.

Yu, H. L.↗
NASA NTRS1978

Additional evidence consistent with solar cycle variations in the solar wind

Analyses of solar-wind observations from mid-1964 through 1973 confirm the earlier results reported by Intriligator (1974) that there were statistically significant variations in the solar wind in 1968 and 1969, years of solar maximum. These variations were in phase with the solar cycle and consistent with a solar-cycle variation in the solar wind. High-speed stream parameters show that the number of high-speed streams in the solar wind in 1968 and 1969 and the total duration (in days) of high-speed streams in 1968 were considerably more than the predicted yearly average, and in 1965 and 1972 considerably less. Histograms of solar-wind speed from 1964 through 1973 indicate that in 1968 there was the highest percentage of elevated solar-wind speeds, and in 1965 and 1972 the lowest. Studies by others confirm these results, although their authors did not indicate this fact. The duration of the streams and the histograms for 1973 may imply a shifting in the primary stream source.

Intriligator, D. S.↗
NASA NTRS1978

Effect of grazing flow on the acoustic impedance of Helmholtz resonators consisting of single and clustered orifices

A semiempirical fluid mechanical model is presented which predicts impedance of a Helmholtz resonator consisting of a single cavity-backed orifice as a function of grazing flow speed, boundary-layer thickness, incident sound amplitude and frequency, and resonator geometry. The incident and cavity sound fields are connected in terms of an orifice discharge coefficient. The effect of multiple orifices was studied experimentally. Interaction between orifices is important only for orifices aligned parallel to the grazing flow. Resistance was virtually independent of both orifice relative spacing and number. Reactance was found to be quite dependent upon orifice spacing but insensitive to the number of orifices.

Hersh, A. S.↗
NASA NTRS1979

A consistent design procedure for supercritical airfoils in free air and a wind tunnel

A computational inverse procedure for transonic airfoils in which shapes are determined supporting prescribed pressure distributions is presented. The method uses the small disturbance equation and a consistent analysis-design differencing procedure at the airfoil surface. This avoids the intermediate analysis-design-analysis iterations. The effect of any openness at the trailing edge is taken onto account by adding an effective source term in the far field. The final results from a systematic expansion procedure which models the far field for solid, ideal slotted, and free jet tunnel walls are presented along with some design results for the associated boundary conditions and those for a free flight.

Shankar, V.↗
NASA NTRS1979

Effect of grazing flow on the acoustic impedance of Helmholtz resonators consisting of single and clustered orifices

A semiempirical fluid mechanical model is derived for the acoustic behavior of thin-walled single orifice Helmholtz resonators in a grazing flow environment. The incident and cavity sound fields are connected in terms of an orifice discharge coefficient whose values are determined experimentally using the two-microphone method. Measurements show that at high grazing flow speeds, acoustical resistance is almost linearly proportional to the grazing flow speed and almost independent of incident sound pressure. The corresponding values of reactance are much smaller and tend towards zero. For thicker-walled orifice plates, resistance and reactance were observed to be less sensitive to grazing flow as the ratio of plate thickness to orifice diameter increased. Loud tones were observed to radiate from a single orifice Helmholtz resonator due to interaction between the grazing flow shear layer and the resonator cavity. Measurements showed that the tones radiated at a Strouhal number equal to 0.26. The effects of grazing flow on the impedance of Helmholtz resonators consisting of clusters of orifices was also studied. In general, both resistance and reaction were found to be virtually independent of orifice relative spacing and number. These findings are valid with and without grazing flow.

Hersch, A. S.↗
NASA NTRS1978

On the stability of self-consistent large amplitude waves in a cold plasma. I - Transverse circularly polarized waves in the absence of a large scale magnetic field

It is demonstrated that a self-consistent circularly polarized wave in an otherwise field-free homogeneous cold plasma is unstable to small amplitude perturbations. For either an electron-positron plasma or an electron-proton plasma the instability rate is at least about the order of the effective plasma frequency when the bulk flow speed is zero. For finite bulk flow speeds of the plasma, it is shown that the electron-positron plasma is unstable, again with a growth rate of the order of the effective plasma frequency; it is also shown that the electron-proton plasma is unstable (at least at small wave numbers, k) with a growth rate proportional to k. The calculated instability rates are conservative, for other modes not investigated here may be more unstable. The results of these calculations bear directly on the understanding of plasma systems thought to be driven by large amplitude waves.

Lee, M. A.↗
NASA NTRS1979

The Shaw meteorite - History of a chondrite consisting of impact-melted and metamorphic lithologies

Three intermingled lithologies are identified in the Shaw L-group chondrite: a light-colored lithology with a poikilitic texture, consisting of olivine and augite crystals surrounded by larger orthopyroxene grains; a dark-colored lithology containing remnant chondrules and exhibiting a microgranular texture; and a gray lithology which appears to be intermediate between the other two. Contrary to published opinions, the Shaw meteorite contains normal L-group chondrite abundances of metal and troilite, though these phases are irregularly distributed. The lithological analyses suggest that 4.52 Byr ago an impact took place on the L-group chondrite parent object of Shaw.

Taylor, G. J.↗
NASA NTRS1980

On self-consistent waves and their stability in warm plasmas. II - Instability of circularly polarized waves both in the presence and the absence of an ambient magnetic field

The stability of a self-consistent, large-amplitude, circularly polarized wave in a warm plasma is investigated. For perturbations to the system propagating normal to the plane of circular polarization, a dispersion relation is derived employing an expansion in the nonlinear wave amplitude and the momentum of the plasma particles in the plane of polarization. Instability results both in the absence and presence of a large-scale magnetic field with a growth rate of the order of the nonlinear wave amplitude.

Lee, M. A.↗
NASA NTRS1980

A consistent set of trial functions for conical shells

A consistent approach is developed for the determination of trial functions for a class of shells of revolution. The trial functions satisfy the in-plane and out-of-plane boundary conditions at the shell ends and include the effects of tangential inertia. The resulting expressions converge rapidly for the problem of linear free vibration

El-Raheb, M.↗
NASA NTRS1982

Ensuring the Consistency of Silicide Coatings

Diagram specifies optimum fusing time for given thicknesses of refractory metal-silicide coatings on columbium C-103 substrates. Adherence to indicated fusion times ensures consistent coatings and avoids underdiffusion and overdiffusion. Accuracy of diagram has been confirmed by tests.

Ramani, V.↗
NASA NTRS1983

Study on radiometric consistency of LANDSAT-4 multispectral scanner

Two full frames of radiometrically corrected LANDSAT-4 MSS data were examined to determine a number of radiometric properties. It was found that LANDSAT-4 MSS produces data of good quality with dynamic ranges and target responses qualitatively similar to those of previous MSS sensors. Banding appears to be quite well corrected, with a residual rms error of about 0.3 digital counts being measured; the histogram equalization algorithm appears to be working as advertised. A low level coherent noise effect was found in all bands, appearing in uniform areas as a diagonal striping pattern. The principle component of this noise was found by Fourier analysis to be a highly consistent wavelength of 3.6 pixels along a scan line (28 KHz). The magnitude of this effect ranged from about 0.75 of one count in the worst band (Band 1) to only about 0.25 counts in the best band (Band 4). Preparations were made for establishing a relative radiometric calibration from MSS 4 data with respect to MSS 3.

Malila, W. A.↗
NASA NTRS1981

Morphometric consistency with the Hausdorff-Besicovich dimension

Studies using different measurement resolutions on a single morphologic feature may yield vastly different measured values for the perimeter. Apparent internal inconsistencies such as these have greatly impeded the numerical taxonomy, description, and modeling of landforms. Fortunately, the underlying internal consistency of measurements can often be reestablished by introducing the Hausdorff-Besicovich dimension into the analysis. This is demonstrated here by the example of perimeter-area ratio measurements made on some of the complicated ejecta deposits that surround many Martian meteorite-impact craters.

Woronow, A.↗
NASA NTRS1983

Broad emission lines of QSOs are consistent with rotating supermassive stars

The basic properties of broad emission-line profiles from quasars and Seyfert galaxies are suggested to indicate emissions originating from the surface of a rotating supermassive star. The areal extent of the ionizing luminosity and its energy are calculated, showing that the broad-line region has a mass of about 10 solar masses and a volume filling factor of 1/1,000,000. It is shown that if the broad-line region consists of a layer of ionized gas on the surface of a rotating supermassive star with an equatorial speed of 5,000 km/sec and a relatively cool surface, a layer of photoionized gas will result and emit a line emission per unit area that is proportional to the incident flux of ionizing radiation. The emitting layer will be heated to about 100 million K by an X ray component of a nonthermal continuum over a 10,000 K surface.

Shields, G. A.↗