Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “computational challenges”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Thermodynamic efficiency limits of classical and bifacial multi-junction tandem solar cells: An analytical approach

Bifacial tandem cells promise to reduce three fundamental losses (i.e., above-bandgap, below bandgap, and the uncollected light between panels) inherent in classical single junction photovoltaic (PV) systems. The successive filtering of light through the bandgap cascade and the requirement of current continuity make optimization of tandem cells difficult and accessible only to numerical solution through computer modeling. The challenge is even more complicated for bifacial design. In this paper, we use an elegantly simple analytical approach to show that the essential physics of optimization is intuitively obvious, and deeply insightful results can be obtained with a few lines of algebra. This powerful approach reproduces, as special cases, all of the known results of conventional and bifacial tandem cells and highlights the asymptotic efficiency gain of these technologies.

Alam, Muhammad Ashraful (ORCID:0000000187756043)↗
DOE OSTI2018

Improving accuracy of electrochemical capacitance and solvation energetics in first-principles calculations

Here, reliable first-principles calculations of electrochemical processes require accurate prediction of the interfacial capacitance, a challenge for current computationally efficient continuum solvation methodologies. We develop a model for the double layer of a metallic electrode that reproduces the features of the experimental capacitance of Ag(100) in a non-adsorbing, aqueous electrolyte, including a broad hump in the capacitance near the potential of zero charge and a dip in the capacitance under conditions of low ionic strength. Using this model, we identify the necessary characteristics of a solvation model suitable for first-principles electrochemistry of metal surfaces in non-adsorbing, aqueous electrolytes: dielectric and ionic nonlinearity, and a dielectric-only region at the interface. The dielectric nonlinearity, caused by the saturation of dipole rotational response in water, creates the capacitance hump, while ionic nonlinearity, caused by the compactness of the diffuse layer, generates the capacitance dip seen at low ionic strength. We show that none of the previously developed solvation models simultaneously meet all these criteria. We design the nonlinear electrochemical soft-sphere solvation model which both captures the capacitance features observed experimentally and serves as a general-purpose continuum solvation model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Simulations of nonradiative processes in semiconductor nanocrystals

The description of carrier dynamics in spatially confined semiconductor nanocrystals (NCs), which have enhanced electron–hole and exciton–phonon interactions, is a great challenge for modern computational science. These NCs typically contain thousands of atoms and tens of thousands of valence electrons with discrete spectra at low excitation energies, similar to atoms and molecules, that converge to the continuum bulk limit at higher energies. Computational methods developed for molecules are limited to very small nanoclusters, and methods for bulk systems with periodic boundary conditions are not suitable due to the lack of translational symmetry in NCs. This perspective focuses on our recent efforts in developing a unified atomistic model based on the semiempirical pseudopotential approach, which is parameterized by first-principle calculations and validated against experimental measurements, to describe two of the main nonradiative relaxation processes of quantum confined excitons: exciton cooling and Auger recombination. Here, we focus on the description of both electron–hole and exciton–phonon interactions in our approach and discuss the role of size, shape, and interfacing on the electronic properties and dynamics for II–VI and III–V semiconductor NCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electronic structure theory on modeling short-range noncovalent interactions between amino acids

While short-range noncovalent interactions (NCIs) are proving to be of importance in many chemical and biological systems, these atypical bindings happen within the so-called van der Waals envelope and pose an enormous challenge for current computational methods. We introduce SNCIAA, a database of 723 benchmark interaction energies of short-range noncovalent interactions between neutral/charged amino acids originated from protein x-ray crystal structures at the “gold standard” coupled-cluster with singles, doubles, and perturbative triples/complete basis set [CCSD(T)/CBS] level of theory with a mean absolute binding uncertainty less than 0.1 kcal/mol. Subsequently, a systematic assessment of commonly used computational methods, such as the second-order Møller−Plesset theory (MP2), density functional theory (DFT), symmetry-adapted perturbation theory (SAPT), composite electronic-structure methods, semiempirical approaches, and the physical-based potentials with machine learning (IPML) on SNCIAA is carried out. It is shown that the inclusion of dispersion corrections is essential even though these dimers are dominated by electrostatics, such as hydrogen bondings and salt bridges. Overall, MP2, ωB97M-V, and B3LYP+D4 turned out to be the most reliable methods for the description of short-range NCIs even in strongly attractive/repulsive complexes. SAPT is also recommended in describing short-range NCIs only if the δMP2 correction has been included. The good performance of IPML for dimers at close-equilibrium and long-range conditions is not transferable to the short-range. We expect that SNCIAA will assist the development/improvement/validation of computational methods, such as DFT, force-fields, and ML models, in describing NCIs across entire potential energy surfaces (short-, intermediate-, and long-range NCIs) on the same footing.

Chemistry↗
DOE OSTI2023

The dynamics, mixing, and thermonuclear burn of compressed foams with varied gas fills

Inertial confinement fusion (ICF) implosions involve highly coupled physics and complex hydrodynamics that are challenging to model computationally. Due to the sensitivity of such implosions to small features, detailed simulations require accurate accounting of the geometry and dimensionality of the initial conditions, including capsule defects and engineering features such as fill tubes used to insert gas into the capsule, yet this is computationally prohibitive. It is therefore difficult to evaluate whether discrepancies between the simulation and experiment arise from inadequate fidelity to the capsule geometry and drive conditions, uncertainties in physical data used by simulations, or inadequate physics. We present results from detailed high-resolution three-dimensional simulations of ICF implosions performed as part of the MARBLE campaign on the National Ignition Facility [Albright et al., Phys. Plasmas 29, 022702 (2022)]. These experiments are foam-filled separated-reactant experiments, where deuterons reside in the foam and tritons reside in the capsule gas fill and deuterium–tritium (DT) fusion reactions only occur in the presence of mixing between these materials. Material mixing in these experiments is primarily seeded by shock interaction with the complex geometry of the foam and gas fill, which induces the Richtmyer–Meshkov instability. We compare results for experiments with two different gas fills (ArT and HT), which lead to significant differences in the hydrodynamic and thermodynamic developments of the materials in the implosion. Our simulation results show generally good agreement with experiments and demonstrate a substantial impact of hydrodynamic flows on measured ion temperatures. The results suggest that viscosity, which was not included in our simulations, is the most important unmodeled physics and qualitatively explains the few discrepancies between the simulation and experiment. The results also suggest that the hydrodynamic treatment of shocks is inadequate to predict the heating and yield produced during shock flash, when the shock converges at the center of the implosion. Alternatively, underestimation of the level of radiative preheat from the shock front could explain many of the differences between the experiment and simulation. Nevertheless, simulations are able to reproduce many experimental observables within the level of experimental reproducibility, including most yields, time-resolved X-ray self-emission images, and an increase in burn-weighted ion temperature and neutron down-scattered ratio in the line of sight that includes a jet seeded by the glue spot that joins capsule hemispheres.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Prevalence and scalable control of localized networks

The ability to control network dynamics is essential for ensuring desirable functionality of many technological, biological, and social systems. Such systems often consist of a large number of network elements, and controlling large-scale networks remains challenging because the computation and communication requirements increase prohibitively fast with network size. Here, we introduce a notion of network locality that can be exploited to make the control of networks scalable, even when the dynamics are nonlinear. We show that network locality is captured by an information metric and is almost universally observed across real and model networks. In localized networks, the optimal control actions and system responses are both shown to be necessarily concentrated in small neighborhoods induced by the information metric. This allows us to develop localized algorithms for determining network controllability and optimizing the placement of driver nodes. This also allows us to develop a localized algorithm for designing local feedback controllers that approach the performance of the corresponding best global controllers, while incurring a computational cost orders-of-magnitude lower. Here, we validate the locality, performance, and efficiency of the algorithms in Kuramoto oscillator networks, as well as three large empirical networks: synchronization dynamics in the Eastern US power grid, epidemic spreading mediated by the global air-transportation network, and Alzheimer’s disease dynamics in a human brain network. Taken together, our results establish that large networks can be controlled with computation and communication costs comparable to those for small networks.

42 ENGINEERING↗
DOE OSTI2025

Closed-form expressions for unitaries of spin-adapted fermionic operators

One of the open challenges in quantum computing simulations of problems of chemical interest is the proper enforcement of spin symmetry. Efficient quantum circuits implementing unitaries generated by spin-adapted operators remain elusive, while naïve Trotterization schemes break spin symmetry. Here, in this work, we analyze the mathematical structure of spin-adapted operators and derive closed-form expressions for unitaries generated by singlet spin-adapted generalised single and double excitations. These results represent significant progress toward the economical enforcement of spin symmetry in quantum simulations.

fermionic algebra↗
DOE OSTI2023

Electronic signatures of successive itinerant, antiferromagnetic transitions in hexagonal La 2 Ni 7

We use high-resolution angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT) calculations to study the electronic and magnetic properties of La 2 Ni 7 , an itinerant magnetic system with a series of three magnetic transition temperatures upon cooling, which end in a small moment antiferromagnetic (smAFM) ground state. Our APRES data reveal several electron and hole pockets that have hexagonal symmetry near the Γ point. We observe significant reconstruction of the band structure upon successive magnetic transitions at T 1 ~ 61 K, T 2 ~ 57 K and T 3 ~ 42 K. Several features observed in ARPES data were reasonably well reproduced by DFT calculations, while others were not. In particular, the flat band near E f predicted by DFT in AFM state, was seemingly absent in ARPES data. Our results detail the effects of magnetic ordering on the electronic structure in a Ni-based small moment antiferromagnet and highlight challenges of current computational methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

CMS use of allocation based HPC resources

The higher energy and luminosity from the LHC in Run2 has put increased pressure on CMS computing resources. Extrapolating to even higher luminosities (and thus higher event complexities and trigger rates) in Run3 and beyond, it becomes clear the current model of CMS computing alone will not scale accordingly. High Performance Computing (HPC) facilities, widely used in scientific computing outside of HEP, present a (at least so far) largely untapped computing resource for CMS. Even just being able use a small fraction of HPC facilities computing resources could significantly increase the overall computing available to CMS. Here we describe the CMS strategy for integrating HPC resources into CMS computing, the unique challenges these facilities present, and how we plan on overcoming these challenges. We also present the current status of ongoing CMS efforts at HPC sites such as NERSC (Cori cluster), SDSC (Comet cluster) and TACC (Stampede cluster).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Approximate quantum circuit synthesis using block encodings

One of the challenges in quantum computing is the synthesis of unitary operators into quantum circuits with polylogarithmic gate complexity. Exact synthesis of generic unitaries requires an exponential number of gates in general. We propose a novel approximate quantum circuit synthesis technique by relaxing the unitary constraints and interchanging them for ancilla qubits via block encodings. This approach combines smaller block encodings, which are easier to synthesize, into quantum circuits for larger operators. Due to the use of block encodings, our technique is not limited to unitary operators and can be applied for the synthesis of arbitrary operators. Overall, we show that operators which can be approximated by a canonical polyadic expression with a polylogarithmic number of terms can be synthesized with polylogarithmic gate complexity with respect to the matrix dimension.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Exploring thermal equilibria of the Fermi-Hubbard model with variational quantum algorithms

Here, this study investigates the thermal properties of the repulsive Fermi-Hubbard model with chemical potential using variational quantum algorithms, crucial in comprehending particle behaviour within lattices at heightened temperatures in condensed matter systems. Conventional computational methods encounter challenges, especially in managing chemical potential, prompting exploration into Hamiltonian approaches. Despite the promise of quantum algorithms, their efficacy is hampered by coherence limitations when simulating extended imaginary time evolution sequences. To overcome these constraints, this research focuses on optimizing variational quantum algorithms to probe the thermal properties of the Fermi-Hubbard model. Physics-inspired circuit designs are tailored to alleviate coherence constraints, facilitating a more comprehensive exploration of materials at elevated temperatures. Our study demonstrates the potential of variational algorithms in simulating the thermal properties of the Fermi-Hubbard model while acknowledging limitations stemming from error sources in quantum devices and encountering barren plateaus.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Evaluating Unified Memory Performance in HIP

Heterogeneous unified memory management between a CPU and a GPU is a major challenge in GPU computing. Recently, unified memory (UM) has been supported by software and hardware components on AMD computing platforms. The support could simplify the complexities of memory management. In this paper, we attempt to have a better understanding of UM by evaluating the performance of UM programs on an AMD MI100 GPU. More specifically, we evaluate data migration using UM against other data transfer techniques for the overall performance of an application, assess the impacts of three commonly used optimization techniques on the kernel execution time of a vector add sample, and compare the performance and productivity of selected benchmarks with and without UM. The performance overhead associated with UM is not trivial, but it can improve programming productivity by reducing lines of code for scientific applications. We aim to present early results and feedback on the UM performance to the vendor.

Jin, Zheming↗
DOE OSTI2016

Asynchronous in situ connected-components analysis for complex fluid flows

Fluid flow in porous media is at the heart of problems such as groundwater contamination and carbon sequestration, and presents an important challenge for scientific computing. For this class of problem, large three-dimensional simulations are performed to advance scientific inquiry. On massively parallel computing systems, the volume of data generated by such approaches can become a productivity bottleneck if the raw data generated from the simulation is analyzed in a post-processing step. We present a physics-based framework for in situ data reduction that is theoretically grounded in multiscale averaging theory. We show how task parallelism can be exploited to concurrently perform a variety of analysis tasks with data-dependent costs, including the generation of iso-surfaces, morphological analyses, and connected components analysis. A task management framework is constructed to launch asynchronous analysis threads, manage dependencies between different tasks, promote data locality and hide the impact of data transfers. The framework is applied to analyze GPU-based simulations of two-fluid flow in porous media, generating a set of averaged measures that represents the overall system behavior. We demonstrate how the approach can be applied to perform physically-consistent averaging over fluid subregions using connected components analysis. Simulations performed on Oak Ridge National Lab s Titan supercomputer are profiled to demonstrate the performance of the associated multi-threaded in situ analysis for typical production simulation of two-fluid flow.

Mcclure, James↗
DOE OSTI2016

Asynchronous In Situ Connected-Components Analysis for Complex Fluid flows, In: ISAV '16 Proceedings of the 2nd Workshop on In Situ Infrastructures for Enabling Extreme-scale Analysis and Visualization

The simulation of multiscale physics is an important challenge for scientific computing. For this class of problem, large three-dimensional simulations are performed to advance scientific inquiry. On massively parallel computing systems, the volume of data generated by such approaches can become a productivity bottleneck if the raw data generated from the simulation is analyzed in a post-processing step. To address this, we present a physics-based framework for in situ data reduction that is theoretically grounded in multiscale averaging theory. We show how task parallelism can be exploited to concurrently perform a variety of analysis tasks with data-dependent costs, including the generation of iso-surfaces, morphological analyses, and connected components analysis. All analyses are performed in parallel using distributed memory and use the same domain decomposition as the simulation. A task management framework is constructed to leverage available parallelism within a node for analysis. The capabilities of the framework are to launch asynchronous analysis threads, manage dependencies between different tasks, promote data locality and minimize the impact of data transfers. The framework is applied to analyze GPU-based simulations of two-fluid-phase flow in porous media, generating a set of averaged measures that represents the overall system behavior. We demonstrate how the approach can be applied to perform physically-consistent analysis over fluid sub-regions determined from connected components analysis. Simulations performed on Oak Ridge National Lab's Titan supercomputer are profiled to demonstrate the performance of the associated multi-threaded in situ analysis approach for typical production simulation of two-fluid-phase flow.

Computer Science↗
DOE OSTI2025

A New Hybrid Quantum-Classical Algorithm for Solving the Unit Commitment Problem

Solving problems related to planning and operations of large-scale power systems is challenging on classical computers due to their inherent nature as mixed-integer and nonlinear problems. Quantum computing provides new avenues to approach these problems. We develop a hybrid quantum-classical algorithm for the Unit Commitment (UC) problem in power systems which aims at minimizing the total cost while optimally allocating generating units to meet the hourly demand of the power loads. The hybrid algorithm combines a variational quantum algorithm (VQA) with a classical Benders-type heuristic. The resulting algorithm computes approximate solutions to UC in three stages: i) a collection of UC vectors capable meeting the power demand with lowest possible operating costs is generated based on VQA; ii) a classical sequential least squares programming (SLSQP) routine is leveraged to find the optimal power level corresponding to a predetermined number of candidate vectors; iii) in the last stage, the approximate solution of UC along with generating units power level combination is given. To demonstrate the effectiveness of the presented method, three different systems with 3 generating units, 10 generating units, and 26 generating units were tested for different time periods. In addition, convergence of the hybrid quantum-classical algorithm for select time periods is proven out on IonQ's Forte system.

Aboumrad, Willie [IonQ, Inc]↗
DOE OSTI2012

High performance radiation transport simulations: Preparing for TITAN

In this paper we describe the Denovo code system. Denovo solves the six-dimensional, steady-state, linear Boltzmann transport equation, of central importance to nuclear technology applications such as reactor core analysis (neutronics), radiation shielding, nuclear forensics and radiation detection. The code features multiple spatial differencing schemes, state-of-the-art linear solvers, the Koch-Baker-Alcouffe (KBA) parallel-wavefront sweep algorithm for inverting the transport operator, a new multilevel energy decomposition method scaling to hundreds of thousands of processing cores, and a modern, novel code architecture that supports straightforward integration of new features. In this paper we discuss the performance of Denovo on the 20+ petaflop ORNL GPU-based system, Titan. We describe algorithms and techniques used to exploit the capabilities of Titan's heterogeneous compute node architecture and the challenges of obtaining good parallel performance for this sparse hyperbolic PDE solver containing inherently sequential computations. Numerical results demonstrating Denovo performance on early Titan hardware are presented.

Baker, C.↗
DOE OSTI2023

Fast Tuning-Free Distributed Algorithm for Solving the Network-Constrained Economic Dispatch

With the increasing penetration of distributed energy resources (DERs) and their participation in the electricity market, it becomes more desirable to apply distributed algorithms for resource allocation in order to address the resulting computational and communicational challenges. Most of the existing distributed algorithms for solving the network-constrained economic dispatch (NCED) problem require the tuning of certain auxiliary parameters. As a result, the robustness of these algorithms against the varieties in DERs is greatly undermined. In this paper, a new distributed algorithm, optimality condition consensus (OCC), is proposed to solve the NCED problem by using distributed power flow (DPF) and ratio consensus as fundamental tools. It inherits the advantages of existing distributed algorithms for the NCED problem but removes the need for parameter tuning to improve performance in practice. In conclusion, the effectiveness of the proposed distributed algorithm in terms of efficiency, scalability, and robustness is demonstrated through detailed case studies.

24 POWER TRANSMISSION AND DISTRIBUTION↗