Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compositeness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Temperature effects of ion irradiation on the nanostructural features in ductile-phase-toughened tungsten composites

Ductile-phase toughened tungsten (DPT W) composites have emerged as promising candidates for load-bearing components behind the plasma-facing tungsten armor in fusion reactors due to their enhanced thermomechanical properties. This study focuses on a composite consisting of W particles embedded in a ductile NiFeW solution matrix, hot-rolled to a thickness reduction of 87% (87R DPT W). Sequential irradiations with Ni2+ and He+ ions were performed to identical doses and helium concentrations at room temperature (RT) and 1273 K. Irradiation at RT produced no discernible nanostructural features due to the immobility of mono-vacancies, whereas cavity formation was observed at 973 K. At 1273 K, the W phase exhibited larger cavities, reduced cavity number density, and lower volumetric swelling compared to 973 K. Notably, nanosized NiFeW precipitates formed within the W phase at 1273 K, a phenomenon absent at 973 K. A new phase of cubic (NiFe)6W6C was also observed at the interphase boundary. In contrast, the NiFeW matrix showed no nanostructural changes at 1273 K, likely due to cavity dissociation. Separate irradiations at 1273 K indicated that Ni2+ ions induced precipitate formation in the W phase, while He+ ions exclusively caused cavity formation. The microstructure of 87R DPT W irradiated at RT and subsequently annealed at 1273 K closely resembled that of material irradiated directly at 1273 K. Like oxide-dispersion-strengthened steels, the observed nanoparticle-embedded W can inhibit dislocation propagation, potentially delaying the ductile-to-brittle transition temperature. These findings highlight the potential of NiFeW nanoparticle-reinforced W composites as irradiation-resistant materials for fusion reactors.

Jiang, Weilin (ORCID:0000000183028313)↗
DOE OSTI2026

Structural and compositional complexities of hierarchical self-assembly: A hypergraph approach

Programmable self-assembly enables the construction of complex molecular, supramolecular, and crystalline architectures from well-designed building blocks. In this work, we introduce a hypergraph-based formalism, Blocks & Bonds (B&B), which generalizes classical chemical graph theory by incorporating directed and multicolored interactions, internal symmetries, and hierarchical organization. Within this framework, we develop the Structure Code (SC), a compact and versatile language for describing self-assembled architectures. We define a Kolmogorov-style structural complexity as the total information content of SC, obtained through its tokenization and Shannon information assignment. Complementing this encoding-based measure, we introduce a much simpler quantity, the compositional complexity, which depends only on the number and cumulative usage of block and bond types in the construction set. A central result of this work is a strong empirical correlation between the token-based structural complexity and the compositional complexity across all examined systems. Owing to this agreement, the compositional complexity emerges as the most practical and broadly applicable measure: it is easy to compute, requires no explicit encoding, and yet closely tracks the actual information content of structurally diverse architectures. Applications to molecular systems (ethylene glycol and glucose), DNA-origami lattices, and crystalline assemblies show that B&B hypergraphs provide a unified, scalable, and information-efficient representation of structural organization, naturally capturing symmetry, modularity, and stereochemistry. This framework establishes a quantitative foundation for complexity-aware classification and inverse design of programmable matter.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Thermophysical Properties of a Uranium Nitride–Molybdenum-Tungsten Composite Fuel for Nuclear Thermal Propulsion

The thermal conductivity of a ceramic-metal composite consisting of 60 vol % uranium nitride incorporated into a molybdenum-tungsten matrix has been measured up to a temperature of 1200°C. Compositing nuclear fuel with refractory materials is considered a viable way to improve the thermal and mechanical properties of fuels, and more recently, has been investigated as a way to improve hydrogen compatibility in a nuclear thermal propulsion rocket reactor. Here, we demonstrate that high-density composites can be produced from direct current sintering and that the resulting thermal conductivity is improved compared to the pure.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Review of Recent Progress in Plasma-Facing Material Joints and Composites in the FRONTIER U.S.-Japan Collaboration

The plasma-facing components (PFCs) of future fusion reactors will have intricate structures and require multiple materials because no one material can simultaneously satisfy all the requirements of the component. The dissimilar material joints in PFCs must withstand extreme thermal and stress gradients under neutron irradiation. The Fusion Research Oriented to Neutron Irradiation and Tritium Behavior at Material Interfaces (FRONTIER) U.S.-Japan collaboration seeks to explore and explain the behavior of internal solid interfaces in PFCs under neutron irradiation. The first step of the collaboration was to identify the leading PFCs that should be studied further and prepare them for the next step, which will include neutron irradiation. Different strategies for material development are being pursued worldwide to produce robust PFCs. Here, in this work, an overview is presented of some of the most promising materials in the areas of copper alloys, tungsten-copper composites, tungsten-steel composites, additively manufactured tungsten, particle-reinforced tungsten, and tungsten and SiC fiber composites. Each material’s fabrication and benefits are described, and some discussion of remaining questions is given.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Printed graphene and its composite with copper for electromagnetic interference shielding applications

Abstract Advances in mobile electronics and telecommunication systems along with 5G technologies have been escalating the electromagnetic interference (EMI) problem in recent years. Graphene-based material systems such as pristine graphene, graphene-polymer composites and other graphene-containing candidates have been shown to provide adequate EMI shielding performance. Besides achieving the needed shielding effectiveness (SE), the method of applying the candidate shielding material onto the object in need of protection is of enormous importance due to considerations of ease of application, reduced logistics and infrastructure, rapid prototyping and throughput, versatility to handle both rigid and flexible substrates and cost. Printing readily meets all these criteria and here we demonstrate plasma jet printing of thin films of graphene and its composite with copper to meet the EMI shielding needs. SE over 30 dB is achieved, which represents blocking over 99.9% of the incoming radiation. Graphene and its composite with copper yield higher green index compared to pure copper shields, implying reduced reflection of incoming electromagnetic waves to help reduce secondary pollution.

Materials Science↗
DOE OSTI2023

Electrochemical performance of ionic polymer metal composite under tensile loading

Abstract Cracks in polymer composites can lead to premature failure, which can be disastrous for polymer-based energy storage devices. Detecting these cracks is essential to guarantee the reliability and safety of such devices. However, detecting cracks in composite polymers such as ionic polymer metal composites (IPMCs) is a challenging task, which makes it difficult to ensure their performance and safety. The overall goal of this study is to investigate the effect of cracks or damage caused by tensile loading on the mechanical properties and electrochemical characteristics of IPMC based capacitors. During tensile testing, the deformation of the IPMC strips causes changes in the ion distribution and concentration in the polymer matrix, influencing the performance of the material. The measurements were conducted utilizing electrochemical impedance spectroscopy at a room temperature ( 21 ∘ C ) and frequency range of 10 KHz to 1 Hz. The method utilized in this study proved to be easy and quick with consistent results. The IPMC capacitor was found to increase its capacitance after major cracking in the Pt electrodes from high tensile mechanical loads. Furthermore, at lower frequency range (<100 Hz), the real ( ε ′ ) and imaginary ( ε ′ ′ ) part of permittivity increase with the addition of loads. This displays that the dielectric property of the material is affected due to the increasing of the loads. It is concluded that, at frequencies above 100 Hz, the permittivity is weakly load dependent.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Low-cost sensor-based damage localization for large-area monitoring of FRP composites

Abstract In recent years, there has been growing interest in self-sensing structural materials across research and industry sectors. Detecting and locating structural damage typically requires numerous sensors wired to a data acquisition (DAQ) circuit, rendering implementation impractical in real structures. This paper proposes an innovative, cost-effective sensor network for damage detection and localization in fiber-reinforced polymer composites. The innovation encompasses three key elements: (1) utilizing carbon fiber tows within the composite as piezoresistive sensors, eliminating the need for additional foreign sensor devices; (2) introducing a novel sensor layout wherein sensor tow branches with varied resistance values are connected in parallel, reducing the number of connections to the DAQ circuit and cutting manufacturing costs significantly; (3) developing a practical sensor terminal fabrication technique to minimize manufacturing expenses. The proposed design methodology for the branch resistance values is first validated using a demonstration panel. Subsequently, the overall strategy is assessed by conducting impact tests on carbon and glass fiber-reinforced composite specimens. Results validate the sensor’s ability to accurately detect and locate structural damage.

Demo, Luke B. (ORCID:0000000208806522)↗
DOE OSTI2025

Loosely bound composite dark matter

We investigate loosely bound composite states made of dark matter, where the binding energy for constituent particles is considerably less than the constituent mass. We focus on models of nuclear and molecular dark matter, where constituents are separated by length scales larger than the inverse constituent mass, just like nuclei and atoms in the Standard Model. The cosmology, structure, and interactions at underground experiments are described. We find that loosely bound composites can have a very large cross section for scattering with nuclei that scales with nucleon number like ∼ A 4 . For some couplings, these composites produce extremely soft (≪ keV) individual atomic recoils while depositing a large amount of total recoil energy (≫ keV) in a single passage through a detector, implying an interesting new class of signatures for low threshold direct detection.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Correlating electronic properties with M-site composition in solid solution Ti y Nb 2- y CT x MXenes

High electrical conductivity is desired in MXene films for applications such as electromagnetic interference shielding, antennas, and electrodes for electrochemical energy storage and conversion applications. Due to the acid etching-based synthesis method, it is challenging to deconvolute the relative importance that factors such as chemical composition and flake size contribute to resistivity. To understand the intrinsic and extrinsic contributions to the macroscopic electronic transport properties, a systematic study controlling compositional and structural parameters was conducted with eight solid solutions in the Ti y Nb 2-y CT x system. Here, in particular, we investigated the different roles played by metal (M)-site composition, flake size, and d-spacing on macroscopic transport. Hard x-ray photoemission spectroscopy and spectroscopic ellipsometry revealed changes to electronic structure induced by the M-site alloying. Consistent with the spectroscopic results, the low- and room-temperature conductivities and effective carrier mobility are correlated with the Ti content, while the impact of flake size and d-spacing is most prominent in low-temperature transport. The results provide guidance for designing and engineering MXenes with a wide range of conductivities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Community composition and abundance of wild bees at row crop-grassland interfaces in west central Nebraska

Abstract Perennial mixed forb and grassland habitats are crucial to conservation of pollinators and connectivity of habitats in intensely farmed landscapes. This study aims to understand the effects of land use on the pollinator community by describing bee abundance, species richness and community composition in perennial conservation grasslands and adjacent annual row crops located in west central Nebraska. In 2022 and 2023, we collected and identified bees via sticky traps at 4 locations (center and edge of adjacent grasslands and crop fields) at 6 replicated sites. We collected 1,768 specimens from sticky traps, resulting in 70 species within 28 genera. Halictidae accounted for 84% of the specimens collected. Bee abundance was influenced by the simple effects of land use (grassland vs. crops), edge adjacency, and the month and year of collection. Differences in bee abundance within a collection date were found mostly in early 2022 (May and June) and late 2023 (September), when the crop center location was generally the lowest, with some evidence for spillover of bees from the grassland into the crop edge during the early summer months. Bee species richness was affected only by month and was not significantly different by land use and edge adjacency. Bee community composition overlapped across the 4 locations, although there were significant dissimilarities between crop fields and grasslands. Surveys of the plant community revealed very low abundance of blooming stems and plant taxonomic richness at crop locations for all sampling periods, while grassland locations were comparatively high and varied over time. Plant communities showed no overlap between crop field and grassland locations. Overall, we found that conservation grasslands, while not seeded specifically with pollinator-attractive forbs, provide diverse resources to support wild bee communities in west central Nebraska; crop edges may also provide non-plant resources such as nesting sites and irrigation water. Going forward, better understanding pollinator species composition and resource utilization relative to land use characteristics and drought conditions will allow for better tailoring of conservation efforts and management strategies in Nebraska and across the larger region.

Entomology↗
DOE OSTI2024

From individual leaves to forest stands: importance of niche, distance decay, and stochasticity vary by ecosystem type and functional group for fungal community composition

Abstract Community assembly is influenced by environmental niche processes as well as stochastic processes that can be spatially dependent (e.g. dispersal limitation) or independent (e.g. priority effects). Here, we sampled senesced tree leaves as unit habitats to investigate fungal community assembly at two spatial scales: (i) small neighborhoods of overlapping leaves from differing tree species and (ii) forest stands of differing ecosystem types. Among forest stands, ecosystem type explained the most variation in community composition. Among adjacent leaves within stands, variability in fungal composition was surprisingly high. Leaf type was more important in stands with high soil fertility and dominated by differing tree mycorrhizal types (sugar maple vs. basswood or red oak), whereas distance decay was more important in oak-dominated forest stands with low soil fertility. Abundance of functional groups was explained by environmental factors, but predictors of taxonomic composition within differing functional groups were highly variable. These results suggest that fungal community assembly processes are clearest for functional group abundances and large spatial scales. Understanding fungal community assembly at smaller spatial scales will benefit from further study focusing on differences in drivers for different ecosystems and functional groups, as well as the importance of spatially independent factors such as priority effects.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Impact of PrsA on membrane lipid composition during daptomycin-resistance-mediated β-lactam sensitization in clinical MRSA strains

Abstract Background The cyclic anionic lipopeptide daptomycin is used in the treatment of severe infections caused by Gram-positive pathogens, including MRSA. Daptomycin resistance, although rare, often results in treatment failure. Paradoxically, in MRSA, daptomycin resistance is usually accompanied by a concomitant decrease in β-lactam resistance in what is known as the ‘see-saw effect’. This resensitization is extensively used for the treatment of MRSA infections, by combining daptomycin and a β-lactam antibiotic, such as oxacillin. Objectives We aimed: (i) to investigate the combined effects of daptomycin and oxacillin on the lipid composition of the cellular membrane of both daptomycin-resistant and -susceptible MRSA strains; and (ii) to assess the involvement of the post-translocational protein PrsA, which plays an important role in oxacillin resistance in MRSA, in membrane lipid composition and remodelling during daptomycin resistance/β-lactam sensitization. Results The combination of microbiological and biochemical studies, with fluorescence microscopy using lipid probes, showed that the lipid composition and surface charge of the daptomycin-resistant cells exposed to daptomycin/oxacillin were dependent on antibiotic concentration and directly associated with PrsA, which influenced cardiolipin remodelling/relocation. Conclusions Our findings show that PrsA, in addition to its post-transcriptional role in the maturation of PBP 2a, is a key mediator of cell membrane remodelling connected to the see-saw effect and may have a key role in the resensitization of daptomycin-resistant strains to β-lactams, such as oxacillin.

de Carvalho, Carla C. C. R.↗
DOE OSTI2022

Manipulation of Lignin Monomer Composition Combined with the Introduction of Monolignol Conjugate Biosynthesis Leads to Synergistic Changes in Lignin Structure

Abstract The complexity of lignin structure impedes efficient cell wall digestibility. Native lignin is composed of a mixture of three dominant monomers, coupled together through a variety of linkages. Work over the past few decades has demonstrated that lignin composition can be altered through a variety of mutational and transgenic approaches such that the polymer is derived almost entirely from a single monomer. In this study, we investigated changes to lignin structure and digestibility in Arabidopsis thaliana in near-single-monolignol transgenics and mutants and determined whether novel monolignol conjugates, produced by a FERULOYL-CoA MONOLIGNOL TRANSFERASE (FMT) or a p-COUMAROYL-CoA MONOLIGNOL TRANSFERASE (PMT), could be integrated into these novel polymers to further improve saccharification efficiency. Monolignol conjugates, including a new conjugate of interest, p-coumaryl p-coumarate, were successfully integrated into high-H, high-G and high-S lignins in A. thaliana. Regardless of lignin composition, FMT- and PMT-expressing plants produced monolignol ferulates and monolignol p-coumarates, respectively, and incorporated them into their lignin. Through the production and incorporation of monolignol conjugates into near-single-monolignol lignins, we demonstrated that substrate availability, rather than monolignol transferase substrate preference, is the most important determining factor in the production of monolignol conjugates, and lignin composition helps dictate cell wall digestibility.

2D-HSQC-NMR↗
DOE OSTI2020

Compositional phase stability of correlated electron materials within DFT+DMFT

Predicting the compositional phase stability of strongly correlated electron materials is an outstanding challenge in condensed matter physics, requiring precise computations of total energies. In this work, we employ the density functional theory plus dynamical mean-field theory (DFT+DMFT) formalism to address local correlations due to transition metal $\textit{d}$ electrons on compositional phase stability in the prototype rechargeable battery cathode material Li x CoO 2 , and detailed comparisons are made with the simpler DFT+$\textit{U}$ approach (i.e., the Hartree-Fock solution of the DMFT impurity problem). Local interactions are found to strongly impact the energetics of the band insulator LiCoO 2 , most significantly via the $E_g$ orbitals, which are partially occupied via hybridization with $\textit{O p}$ states. We find CoO 2 and Li 1/2 CoO 2 to be moderately correlated Fermi liquids with quasiparticle weights of 0.6–0.8 for the $T_{2g}$ states, which are most impacted by the interactions. Further, as compared to DFT+$\textit{U}$, DFT+DMFT considerably dampens the increase in total energy as $\textit{U}$ is increased, which indicates that dynamical correlations are important to describe this class of materials despite the relatively modest quasiparticle weights. Unlike DFT+$\textit{U}$, which can incorrectly drive Li x CoO 2 toward spurious phase separating or charge-ordered states, DFT+DMFT correctly captures the system's phase stability and does not exhibit a strong charge-ordering tendency. Most importantly, the error within DFT+$\textit{U}$ varies strongly as the composition changes, challenging the common practice of artificially tuning $\textit{U}$ within DFT+$\textit{U}$ to compensate the errors of Hartree-Fock. DFT+DMFT predicts the average intercalation voltage decreases relative to DFT, opposite to the result of DFT+$\textit{U}$, which would yield favorable agreement with experiment in conjunction with the overprediction of the voltage by the strongly constrained and appropriately normed DFT functional.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Composition-transferable machine learning potential for LiCl-KCl molten salts validated by high-energy x-ray diffraction

Unraveling the liquid structure of multicomponent molten salts is challenging due to the difficulty in conducting and interpreting high-temperature diffraction experiments. Here, motivated by this challenge, we developed composition-transferable Gaussian approximation potential (GAP) for molten LiCl-KCl. A DFT-SCAN accurate GAP is active-learned from only ~1100 training configurations drawn from 10 unique mixture compositions enriched with metadynamics. The GAP-computed structures show strong agreement across high-energy x-ray diffraction experiments, including for a eutectic not explicitly included in model training, thereby opening the possibility of composition discovery.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Composite excitonic states in doped semiconductors

We present a theoretical model of composite excitonic states in doped semiconductors. Many-body interactions between a photoexcited electron-hole pair and the electron gas are integrated into a computationally tractable few-body problem, solved by the variational method. We focus on electron-doped monolayer (ML)-MoSe 2 and ML-WSe 2 due to the contrasting character of their conduction bands. In both cases, the core of the composite is a tightly bound trion (two electrons and a valence-band hole) surrounded by a region depleted of electrons. The composite in ML-WSe 2 further includes a satellite electron with different quantum numbers. The theory is general and can be applied to semiconductors with various energy-band properties, allowing one to calculate their excitonic states and to quantify the interaction with the Fermi sea.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Two-fluid theory of composite bosons and fermions and the quantum Hall proximity effect

Here we propose a two-fluid description of fractional quantum Hall systems, in which one component is a condensate of composite bosons and the other a Fermi liquid formed by composite fermions (or simply electrons). We employ the theory to model the interface between a fractional quantum Hall liquid and a (composite) Fermi liquid metal, where we find a penetration of quantum Hall condensate into the metallic region reminiscent of the proximity effect in superconductor-metal interfaces. We also find a novel and physically reasonable set of gapped quasielectron and neutral modes in fractional quantum Hall liquids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Composition dependence of bulk properties in the Co-intercalated transition metal dichalcogenide $\mathrm{Co_{1/3}TaS_2}$

Spontaneous Hall conductivity has recently been reported in the triangular lattice antiferromagnet Co 1/3 TaS 2 under a zero magnetic field. This phenomenon originates from the distinctive noncoplanar triple-Q magnetic ground state, possessing uniform real-space Berry curvature characterized by scalar spin chirality. We investigated the physical properties of Co 1/3 TaS 2 by judiciously controlling the composition, revealing a drastic change in its bulk properties, even by slight variations in cobalt composition, despite the same crystal structure. For 0.299≤x≤0.325, Co x TaS 2 keeps all the characteristics of the ground state consistent with the previous studies—two antiferromagnetic phase transitions at T N1 and T N2 ( N1 ), a large spontaneous Hall conductivity [σ xy (H=0)], and a weak ferromagnetic moment along the c axis. However, samples with x≥0.330 exhibit distinct bulk properties, including the absence of both σ xy (H=0) and the weak ferromagnetic moment. Our neutron diffraction data reveal that Co x TaS 2 with x≥0.330 develops coplanar helical magnetic order with q m1 =(1/3, 0, 0). This is entirely different from what has been seen in x≤0.325, explaining the observed composition dependence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗