Results for “characterization techniques” — Page 53

NASA NTRS1980

Recent advances in structural technology for large deployable and erectable spacecraft

Ultra-low mass deployable and erectable truss structure designs for spacecraft are identified using computerized structural sizing techniques. Extremely slender strut proportions are shown to characterize minimum mass spacecraft which are designed for Shuttle transport to orbit. Analytical results are presented which demonstrate discrete element effects using a recently developed buckling theory for periodic lattice type structures. An analysis of fabrication imperfection effects on the surface accuracy of four different antenna reflector structures is summarized. This study shows the tetrahedral truss to have the greatest potential of the structures examined for application to accurate or large reflectors. A deployable module which can be efficiently transported is identified and shown to have significant potential for application to future antenna requirements. Recent investigations of erectable structure assembly are reviewed. Initial experiments simulating astronaut assembly by extra-vehicular activity (EVA) show that a pair of astronauts can achieve assembly times of 2-5 min/strut. Studies indicate that an automated assembler can achieve times of less than 1 min/strut on an around-the-clock basis.

Bush, H. G.↗

NASA NTRS1982

Poly(aryl ethers) and related polysiloxane copolymer molecular coatings: Preparation and radiation degradation

The radiation degradation of poly(arylene ether sulfones) and related materials is studied. These basic studies are important both as a means to developing stronger, more stable matrix resins for composite materials, as well as to improve the data base in regard to chemical structure-physical property relationships. Thirty homo and copolymers were synthesized, at least partially characterized and, in several cases suitable film casting techniques were developed. Four samples were chosen for initial radiation degradation. Poly(dimethyl siloxane) soft bocks/segments can preferentially migrate to the surface of copolymer films. Since siloxanes are utilized as thermal control coatings, this form of 'molecular' coating is of interest. The chemistry for preparing such copolymers with any of the polymers described was demonstrated.

Mcgrath, J. E.↗

NASA NTRS1982

Polyimides with pendant alkyl groups

The effect on selected polyimide properties when pendant alkyl groups were attached to the polymer backbone was investigated. A series of polymers were prepared using benzophenone tetracarboxylic acid dianhydride (BTDA) and seven different p-alkyl-m,p'-diaminobenzophenone monomers. The alkyl groups varied in length from C(1) (methyl) to C(9) (nonyl). The polyimide prepared from BTDA and m,p'-diaminobenzophenone was included as a control. All polymers were characterized by various chromatographic, spectroscopic, thermal, and mechanical techniques. Increasing the length of the pendant alkyl group resulted in a systematic decrease in glass transition temperature (Tg) for vacuum cured films. A 70 C decrease in Tg to 193 C was observed for the nonyl polymer compared to the Tg for the control. A corresponding systematic increase in Tg indicative of crosslinking, was observed for air cured films. Thermogravimetric analysis revealed a slight sacrifice in thermal stability with increasing alkyl length. No improvement in film toughness was observed.

Jensen, B. J.↗

NASA NTRS1984

On the impact of communication complexity in the design of parallel numerical algorithms

This paper describes two models of the cost of data movement in parallel numerical algorithms. One model is a generalization of an approach due to Hockney, and is suitable for shared memory multiprocessors where each processor has vector capabilities. The other model is applicable to highly parallel nonshared memory MIMD systems. In the second model, algorithm performance is characterized in terms of the communication network design. Techniques used in VLSI complexity theory are also brought in, and algorithm independent upper bounds on system performance are derived for several problems that are important to scientific computation.

Gannon, D.↗

NASA NTRS1984

Failure analysis of thin-film amorphous-silicon solar-cell modules

A failure analysis of thin film amorphous silicon solar cell modules was conducted. The purpose of this analysis is to provide information and data for appropriate corrective action that could result in improvements in product quality and reliability. Existing techniques were expanded in order to evaluate and characterize degradational performance of a-Si solar cells. Microscopic and macroscopic defects and flaws that significantly contribute to performance degradation were investigated.

Kim, Q.↗

NASA NTRS1984

On the impact of communication complexity on the design of parallel numerical algorithms

This paper describes two models of the cost of data movement in parallel numerical alorithms. One model is a generalization of an approach due to Hockney, and is suitable for shared memory multiprocessors where each processor has vector capabilities. The other model is applicable to highly parallel nonshared memory MIMD systems. In this second model, algorithm performance is characterized in terms of the communication network design. Techniques used in VLSI complexity theory are also brought in, and algorithm-independent upper bounds on system performance are derived for several problems that are important to scientific computation.

Gannon, D. B.↗

NASA NTRS1984

Polyimide characterization studies - Effect of pendant alkyl groups

The effect on selected polyimide properties when pendant alkyl groups were attached to the polymer backbone was investigated. A series of polymers were prepared using benzophenone tetracarboxylic acid dianhydride (BTDA) and seven different p-alkyl-m,p'-diaminobenzophenone monomers. The alkyl groups varied in length from C(1) (methyl) to C(9) (nonyl). The polyimide prepared from BTDA and m,p'-diaminobenzophenone was included as a control. All polymers were characterized by various chromatographic, spectroscopic, thermal, and mechanical techniques. Increasing the length of the pendant alkyl group resulted in a systematic decrease in glass transition temperature (Tg) for vacuum cured films. A 70 C decrease in Tg to 193 C was observed for the nonyl polymer compared to the Tg for the control. A corresponding systematic increase in Tg indicative of crosslinking, was observed for air cured films. Thermogravimetric analysis revealed a slight sacrifice in thermal stability with increasing alkyl length. No improvement in film toughness was observed.

Jensen, B. J.↗

NASA NTRS1987

Practical aspects of achieving accurate radiometric field measurements

This paper provides practical advice for investigators new to the field of high accuracy radiometric experiments. Sources typically used for calibrating land reflectance measurement instruments are identified, and some special considerations for their use are highlighted. The physical nature of the processes determining the output of these sources is emphasized, and an estimate of the typical calibration accuracies achieved with these sources is described. Several techniques for the validation and verification of instrument characterization are reviewed. Experiment design of the Backscattered Ultraviolet Spectrometer (BUV) and the Earth Radiation Budget Experiment (ERBE) are introduced as successful mission designs for accomplishing high accuracy radiation measurements from space. The goal of this paper is to introduce reasoning developed in other missions to experiments devoted to sensing the earth's surface and near surface.

Guenther, B.↗

NASA NTRS1987

Physiologic adaptation of man in space; Proceedings of the Seventh International Man in Space Symposium, Houston, TX, Feb. 10-13, 1986

Topics discussed in this volume include space motion sickness, cardiovascular adaptation, fluid shifts, extravehicular activity, general physiology, perception, vestibular response modifications, vestibular physiology, and pharmacology. Papers are presented on the clinical characterization and etiology of space motion sickness, ultrasound techniques in space medicine, fluid shifts in weightlessness, Space Shuttle inflight and postflight fluid shifts measured by leg volume changes, and the probability of oxygen toxicity in an 8-psi space suit. Consideration is also given to the metabolic and hormonal status of crewmembers in short-term space flights, adaptive changes in perception of body orientation and mental image rotation in microgravity, the effects of a visual-vestibular stimulus on the vestibulo-ocular reflex, rotation tests in the weightless phase of parabolic flight, and the mechanisms of antimotion sickness drugs.

Holland, Albert W.↗

NASA NTRS1987

Cure study of soluble aromatic polyimide films

Several soluble aromatic poly(amic acid) films were staged at intervals to 325 C and characterized by IR spectroscopy and various solution property techniques. A series of films in which the polymer had been endcapped in an effort to control chain extension was also examined. Much of the behavior observed is consistent with an interpretation that a reduction in molecular weight occurred during cure before the ultimate molecular weight was achieved as a polyimide.

Young, Philip R.↗

NASA NTRS1990

Experimental and theoretical study of Rayleigh-Lamb waves in a plate containing a surface-breaking crack

Scattering of Rayleigh-Lamb waves by a normal surface-breaking crack in a plate has been studied both theoretically and experimentally. The two-dimensionality of the far field, generated by a ball impact source, is exploited to characterize the source function using a direct integration technique. The scattering of waves generated by this impact source by the crack is subsequently solved by employing a Green's function integral expression for the scattered field coupled with a finite element representation of the near field. It is shown that theoretical results of plate response, both in frequency and time, are similar to those obtained experimentally. Additionally, implication for practical applications are discussed.

Paffenholz, Joseph↗

NASA NTRS1991

NDE of ceramics and ceramic composites

Although nondestructive evaluation (NDE) techniques for ceramics are fairly well developed, they are difficult to apply in many cases for high probability detection of the minute flaws that can cause failure in monolithic ceramics. Conventional NDE techniques are available for monolithic and fiber reinforced ceramic matrix composites, but more exact quantitative techniques needed are still being investigated and developed. Needs range from flaw detection to below 100 micron levels in monolithic ceramics to global imaging of fiber architecture and matrix densification anomalies in ceramic composites. NDE techniques that will ultimately be applicable to production and quality control of ceramic structures are still emerging from the lab. Needs are different depending on the processing stage, fabrication method, and nature of the finished product. NDE techniques are being developed in concert with materials processing research where they can provide feedback information to processing development and quality improvement. NDE techniques also serve as research tools for materials characterization and for understanding failure processes, e.g., during thermomechanical testing.

Vary, Alex↗

NASA NTRS1990

An expert system for geologic mapping with imaging spectrometers

Techniques have been developed for the extraction and characterization of absorption features from visible and infrared reflectance spectra and an expert system has been designed, implemented, and successfully tested that allows automated identification of minerals based on their spectral characteristics. A suite of laboratory spectra of common minerals was analyzed and the absorption band characteristics tabulated and used to develop a generalized knowledge base for analysis of the reflectance spectra. A tree hierarchy was designed to emulate the decision process followed by an experienced analyst for analysis of laboratory and field reflectance spectra and aircraft imaging spectrometer spectra. Good results were obtained with the expert system for all three types of spectra, with the critical factor in the analysis being the signal-to-noise ratio of the spectral data.

Kruse, F. A.↗

NASA NTRS1992

Plasma contactor research - 1991

A report describing the operating principles of hollow-cathode-based plasma contactors emitting or collecting electrons from an ambient plasma is summarized. Preliminary experiments conducted to determine the noise generated by these plasma contactors in the emission-current return line and in the plasma near it are described. These noise data are measured as current fluctuations in the return line and to the Langmuir probe and then analyzed using a fast Fourier transform technique. The spectral compositions of the data are characterized using power spectral density plots which are examined to identify possible noise source(s) and production mechanism(s). The precautions taken in the construction and calibration of the instrumentation to assure adequate frequency response are described. Experimental results show that line-current noise levels are typically 2 percent of the electron current being emitted or collected. However, noise levels increase to as much as 20 percent of the electron current at a few electron-collection operating conditions. The frequencies associated with most of the noise were harmonics of the 60 Hz input to system power supplies. Plasma noise had characteristics similar in magnitude and frequency to those for the return-line noise, but they contained additional features at frequencies considered to be related to ion-acoustic instabilities. Also discussed is a new probe positioning system built to facilitate future plasma-contractor research.

Buchholtz, Brett↗

NASA NTRS1990

Scientific applications of frequency-stabilized laser technology in space

A synoptic investigation of the uses of frequency-stabilized lasers for scientific applications in space is presented. It begins by summarizing properties of lasers, characterizing their frequency stability, and describing limitations and techniques to achieve certain levels of frequency stability. Limits to precision set by laser frequency stability for various kinds of measurements are investigated and compared with other sources of error. These other sources include photon-counting statistics, scattered laser light, fluctuations in laser power, and intensity distribution across the beam, propagation effects, mechanical and thermal noise, and radiation pressure. Methods are explored to improve the sensitivity of laser-based interferometric and range-rate measurements. Several specific types of science experiments that rely on highly precise measurements made with lasers are analyzed, and anticipated errors and overall performance are discussed. Qualitative descriptions are given of a number of other possible science applications involving frequency-stabilized lasers and related laser technology in space. These applications will warrant more careful analysis as technology develops.

Schumaker, Bonny L.↗

NASA NTRS1993

NDE of ceramics and ceramic composites

Although nondestructive evaluation (NDE) techniques for ceramics are fairly well developed, they are difficult to apply in many cases for high probability detection of the minute flaws that can cause failure in monolithic ceramics. Conventional NDE techniques are available for monolithic and fiber reinforced ceramic matrix composites, but more exact quantitative techniques needed are still being investigated and developed. Needs range from flaw detection to below 100 micron levels in monolithic ceramics to global imaging of fiber architecture and matrix densification anomalies in ceramic composites. NDE techniques that will ultimately be applicable to production and quality control of ceramic structures are still emerging from the lab. Needs are different depending on the processing stage, fabrication method, and nature of the finished product. NDE techniques are being developed in concert with materials processing research where they can provide feedback information to processing development and quality improvement. NDE techniques also serve as research tools for materials characterization and for understanding failure processes, e.g., during thermomechanical testing.

Vary, Alex A.↗

NASA NTRS1994

Induced population gradients in galaxy merger remnants

We use numerical models to investigate the nature of induced population gradients in merger remnants. As noted by White, we find that the population mixing in stellar-dynamical mergers is rather moderate, leading to metallicity gradients in the remnant that are closely tied to gradients in the progenitor galaxies. Furthermore, the resultant metallicity gradients are poorly fitted by power laws, showing significant nonlinearities within an effective radius. If constant metallicity bulges are added to the progenitor disks, the strong relation between final and initial metallicity gradients is diluted, but the final gradients are still not well fitted by power laws. Detailed studies of the shape of the metallicity gradients in elliptical galaxies should help determine the degree to which stellar-dynamical mergers have contributed to the population of present-day ellipticals. We also consider the effects of centrally concentrated starbursts on metallicity gradients. Using simple models for metallicity enhancement, we find that addition of a metal-rich starburst population can reproduce the magnitude and shape of metallicity gradients observed in elliptical galaxies. However, even in such cases the metallicity gradients in the merger remnant should steepen significantly beyond an effective radius. Modelling such merger-induced starbursts with population synthesis techniques, we find that if the starburst is characterized by solar metallicity, it should be detectable as a bluing of the nuclear regions for several Gyr. However, if the starburst is metal-rich, the reddening effects of higher metallicity makes the broad-band signature of the starburst much more difficult to detect.

Mihos, J. Christopher↗

NASA NTRS1999

The Observed Spectral Evolution of Solar Flare Hard X-Ray Emission

The spectral evolution of flare emission may be characterized using color-color diagrams (CCDs), a technique which has been widely employed by the astrophysics community, but not yet by the solar flare community. CCDs are constructed for a sample of flares observed simultaneously by CGRO/BATSE and Yohkoh/HXT. It is found that flare spectral evolution follows one of only a few patterns, which generally evolve differently than the soft-hard-soft pattern put forth as the norm in previous work. The implications for the nature of flare energy release and acceleration/propagation models are discussed

Newton, Elizabeth↗