SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The DC electrical behavior of n-type 4H-SiC resistors used for realizing 500 C durable integrated circuits (ICs) is studied as a function of substrate bias and temperature. Improved fidelity electrical simulation is described using SPICE NMOS model to simulate resistor substrate body bias effect that is absent from the SPICE semiconductor resistor model.
The DC electrical behavior of n-type 4H-SiC resistors used for realizing 500 degrees Celsius durable integrated circuits (ICs) is studied as a function of substrate bias and temperature. Improved fidelity electrical simulation is described using SPICE NMOS model to simulate resistor substrate body bias effect that is absent from the SPICE semiconductor resistor model.
In passive microwave remote sensing of soil moisture, the tau-omega (τ-ω) model has often been used to provide soil moisture estimates at a spatial scale representative of the satellite footprint dimensions. For modeling simplicity, model parameters such as the single scattering albedo (ω) and vegetation opacity (τ) that go into the geophysical inversion process are often assumed to be independent of polarizations. Although this absence of polarization dependence can often be justified in special cases as in low-frequency remote sensing or under dense vegetation conditions, it is not a robust assumption in general. Additional model parameterization errors arising from this assumption are possible, leading to degradation in soil moisture estimation accuracy. In this paper, we propose a time series approach to try to resolve the polarization dependence of several τ-ω model parameters as well as the temperature bias arising from the ancillary temperature data. The Version 4 of the Soil Moisture Active Passive (SMAP) Level 1B brightness temperature time series observations were used to illustrate the mechanics of this approach, with an emphasis on a comparison between resulting satellite soil moisture retrievals and in situ data collected at several core validation sites. It was found that this time series approach resulted in significant reduction of the dry bias exhibited in the current SMAP passive soil moisture data products, while retaining the same performance in other metrics of the current baseline passive soil moisture retrieval algorithm.
We are developing kilo-pixel arrays of transition-edge sensors (TESs) for the X-ray Integral Field Unit on ESA's (European Space Agency's) Athena observatory. Previous measurements of AC-biased Mo/Au TESs have highlighted a frequency-dependent loss mechanism that results in broader transitions and worse spectral performance compared to the same devices measured under DC (Direct Current) bias. In order to better understand the nature of this loss, we are now studying TES pixels in different geometric configurations. We present measurements on devices of different sizes and with different metal features used for noise mitigation and X-ray absorption. Our results show how the loss mechanism is strongly dependent upon the amount of metal in close proximity to the sensor and can be attributed to induced eddy current coupling to these features. We present a finite element model that successfully reproduces the magnitude and geometry dependence of the losses. Using this model, we present mitigation strategies that should reduce the losses to an acceptable level.
US background ozone (O3) includes O3 produced from anthropogenic O3 precursors emitted outside of the USA, from global methane, and from any natural sources. Using a suite of sensitivity simulations in the GEOS-Chem global chemistry transport model, we estimate the influence from individual background sources versus US anthropogenic sources on total surface O3 over 10 continental US regions from 2004 to 2012. Evaluation with observations reveals model biases of +0-19ppb in seasonal mean maximum daily 8h average (MDA8) O3, highest in summer over the eastern USA. Simulated high-O3 events cluster too late in the season. We link these model biases to excessive regional O3 production (e.g., US anthropogenic, biogenic volatile organic compounds (BVOCs), and soil NOx, emissions), or coincident missing sinks. On the 10 highest observed O3 days during summer (O3_top10obs_JJA), US anthropogenic emissions enhance O3 by 5-11ppb and by less than 2ppb in the eastern versus western USA. The O3 enhancement from BVOC emissions during summer is 1-7 ppb higher on O3_top10obs_JJA days than on average days, while intercontinental pollution is up to 2ppb higher on average versus on O3_top10obs_JJA days. During the summers of 2004-2012, monthly regional mean US background O3 MDA8 levels vary by up to 15ppb from year to year. Observed and simulated summertime total surface O3 levels on O3_top10obs_JJA days decline by 3ppb (averaged over all regions) from 2004-2006 to 2010-2012, reflecting rising US background (+2ppb) and declining US anthropogenic O3 emissions (6ppb) in the model. The model attributes interannual variability in US background O3 on O3_top10obs days to natural sources, not international pollution transport. We find that a 3-year averaging period is not long enough to eliminate interannual variability in background O3 on the highest observed O3 days.
The clouds in southern hemisphere extratropical cyclones generated by the GFDL climate model are analyzed against MODIS, CloudSat and CALIPSO cloud and precipitation observations. Two model versions are used: one is a developmental version of AM4, a model GFDL will utilize for CMIP6, the other is the same model with a different parameterization of moist convection. Both model versions predict a realistic top-of-atmosphere cloud cover in the southern oceans, within 5% of the observations. However, an examination of cloud cover transects in extratropical cyclones reveals a tendency in the models to overestimate high-level clouds (by differing amounts) and underestimate cloud cover at low-levels (again by differing amounts), especially in the post-cold frontal (PCF) region, when compared to observations. Focusing on only the models, their differences in high and mid-level clouds are consistent with their differences in convective activity and relative humidity (RH), but the same is not true for the PCF region. In this region, RH is higher in the model with less cloud fraction. These seemingly contradictory cloud and RH differences can be explained by differences in the cloud parameterization tuning parameters that ensure radiative balance. In the PCF region, the model cloud differences are smaller than either of the model biases with respect to observations, suggesting other physics changes are needed to address the bias. The process-oriented analysis used to assess these model differences will soon be automated and shared.
Exposure of chip MnO2 tantalum capacitors to humid environments might result in increased ESR, leakage currents, and first turn-on failures. However, there is a lack of literature data on the effect of moisture on reverse bias behavior of the parts. The presence of moisture can also result in pop-corning when a high water vapor pressure develops when moisture absorbed in pores of tantalum slugs vaporizes instantly during soldering process resulting in damage to capacitors. A study of kinetics of moisture ingress to and release from active elements of capacitors would allow a better understanding of degradation mechanisms and is important for preventing failures. In this work, a technique for investigation of moisture sorption and desorption in solid chip tantalum capacitors that employs tantalum slugs as a humidity sensor have been developed and kinetics of the process analyzed for different types of capacitors at temperatures from room to 125 ºC. A model that relates diffusion characteristics of polymer cases and size of the slugs to characteristic times of moisture sorption has been developed. A strong effect of moisture on long-term degradation of reverse bias currents in MnO2 cathode capacitors has been demonstrated and physical mechanisms discussed.
Exposure of chip MnO2 tantalum capacitors to humid environments might result in increased ESR, leakage currents, and first turn-on failures. However, there is a lack of literature data on the effect of moisture on reverse bias behavior of the parts. The presence of moisture can also result in pop-corning when a high water vapor pressure develops when moisture absorbed in pores of tantalum slugs vaporizes instantly during soldering process resulting in damage to capacitors. A study of kinetics of moisture ingress to and release from active elements of capacitors would allow a better understanding of degradation mechanisms and is important for preventing failures. In this work, a technique for investigation of moisture sorption and desorption in solid chip tantalum capacitors that employs tantalum slugs as a humidity sensor have been developed and kinetics of the process analyzed for different types of capacitors at temperatures from room to 125 C. A model that relates diffusion characteristics of polymer cases and size of the slugs to characteristic times of moisture sorption has been developed. A strong effect of moisture on long-term degradation of reverse bias currents in MnO2 cathode capacitors has been demonstrated and physical mechanisms discussed.
Particulate organic carbon (POC) plays an oversize role, relative to its standing stock in the global carbon (C) cycle. Accurate measurement of POC is central to understanding the ocean C flux and its sensitivity to climate forcing. POC is a standard NASA ocean color data product, which lacks a consensus, quality-assured measurement protocol for satellite validation. Thus, algorithms based on field measurements lacking verified uncertainties have limited applicability towards climate data records. Different sampling and filtration protocols, and blank corrections, introduce biases in the magnitude of POC measured from the field. A significant filter blank attributable to dissolved organic C (DOC) adsorption that, until recently has been seldom corrected for, likely has introduced biases in POC global datasets.
East Asia is a region of increasing economic growth which has led to severe PM2.5 pollution in urban areas. The joint NASA-NIER Korea-United States Air Quality (KORUS-AQ) field campaign in May-June 2016 provided an extensive dataset of ground, airborne, and remote sensing observations to test model simulations of PM2.5 pollution transport and potential control measures. During KORUS-AQ, a period of haze was observed in which PM2.5 rapidly increased to the highest levels observed during the campaign. This increase is associated with increasing inorganic aerosol. While a portion of this increase is due to long-range transport, there is observational evidence that aerosol formation from local precursors was also enhanced. This suggests that domestic policy measures could have a greater than expected influence on controlling PM2.5. However, models have difficulty reproducing PM2.5 levels, particularly the composition of secondary inorganic aerosol. Models generally underestimate sulfate and overestimate nitrate and fail to represent the peak levels of PM2.5 during haze events. These biases have been chiefly attributed to errors in chemical mechanisms and model meteorology, not issues with underlying emissions inventories. Here, we use observations from KORUS-AQ interpreted by the GEOS-Chem chemical transport model to improve the model’s ability to reproduce secondary inorganic aerosol concentrations during the campaign and explore mechanisms to improve model biases during the haze event. We assess the fraction of inorganic aerosol from the improved model simulation that results from transboundary transport during KORUS-AQ and test the model sensitivity to potential emission reduction measures that could improve air quality in Seoul during different meteorological periods including haze episodes.
Total dose tests of six different low dropout voltage regulators show sensitivity to both dose rate and bias during exposure. All devices tested exhibited Enhanced Low Dose Rate Sensitivity (ELDRS) and performed worse for the unbiased irradiation condition. Behavior of critical parameters in different dose rate and bias conditions is compared and the impact to hardness assurance methodology is discussed.
The Nimbus 7 Limb Infrared Monitor of theStratosphere (LIMS) instrument operated from 25 Octo-ber 1978 through 28 May 1979. Its version 6 (V6) profileswere processed and archived in 2002. We present severaldiagnostic examples of the quality of the V6 stratospheric species distributions based on their level 3 zonal Fourier co-efficient products. In particular, we show that there are smalldifferences in the ascending (A) minus descending (D) or-bital temperature–pressure orT(p) profiles (theirA−Dval-ues) that affect (A−D) species values. SystematicA−Dbi-ases inT(p) can arise from small radiance biases and/or fromviewing anomalies along orbits. There can also be (A−D)differences inT(p) due to not resolving and correcting forall of the atmospheric temperature gradient along LIMS tan-gent view-paths. An error inT(p) affects species retrievalsthrough (1) the Planck blackbody function in forward calcu-lations of limb radiance that are part of the iterative retrievalalgorithm of LIMS, and (2) the registration of the measuredLIMS species radiance profiles in pressure altitude, mainlyfor the lower stratosphere. There are clearA−Ddifferencesfor ozone, H2O, and HNO3but not for NO2. Percentage differences are larger in the lower stratosphere for ozone andH2O because those species are optically thick. We evaluateV6 ozone profile biases in the upper stratosphere with the aid of comparisons against a monthly climatology of UV–ozone soundings from rocketsondes. We also provide resultsof time series analyses of V6 ozone, H2O, and potential vor-ticity for the middle stratosphere to show that their average(A+D) V6 level 3 products provide a clear picture of the evolution of those tracers during Northern Hemisphere win-ter. We recommend that researchers use the average V6 level3 product for their science studies of stratospheric ozone andH2O, while keeping in mind that there are uncorrected non-local thermodynamic equilibrium effects in daytime ozone inthe lower mesosphere and in daytime H2O in the uppermoststratosphere. We also point out that the present-day Soundingof the Atmosphere using Broadband Emission Radiometry(SABER) experiment provides measurements and retrievalsof temperature and ozone that are nearly free of anomalousdiurnal variations and of effects from gradients at low and middle latitudes.
The ability to monitor and understand natural and anthropogenic variability in atmospheric carbon dioxide(CO2) is a growing need of many stakeholders across the world. Systems that assimilate satellite observations, given their short latency and dense spatial coverage, into high resolution global models are valuable, if not essential, tools for addressing this need. A notable drawback of modern assimilation systems is the long latency of many vital in-put datasets, e.g., inventories, in situ measurements, and re-processed remote-sensing data can trail the current date by months to years. This paper describes techniques for bias-correcting surface fluxes derived from satellite observations of the Earth’s surface to be consistent with constraints from inventories and in situ CO2 datasets. The techniques are applicable in both short-term forecasts and retrospective simulations, thus taking advantage of the coverage and short latency of satellite data while reproducing the major features of long-term inventory and in situ records. Our approach begins with a standard collection of diagnostic fluxes which incorporate a variety of remote-sensing driver data, viz. vegetation indices, fire radiative power, and nighttime lights. We then apply an empirical sink so that global budgets of the diagnostic fluxes match given atmospheric and oceanic growth rates for each year. This step removes coherent, systematic flux errors that produce biases inCO2which mask the signals an assimilation system hopes to capture. Depending on the simulation mode, the empirical sink uses different choices of atmospheric growth rates: estimates based on observations in retrospective mode and projections based on seasonal fore-casts of sea surface temperature in forecasting mode. The retrospective fluxes, when used in simulations with NASA’s Goddard Earth Observing System (GEOS), reproduce marine boundary layer measurements with comparable skill to those using fluxes from a modern inversion system. The forecasted fluxes show promising accuracy in their application to the analysis of changes in the carbon cycle as they occur.
NASA Marshall Space Flight Center (MSFC) in collaboration with DLA Land and Maritime-VAC support is conducting a survey to obtain feedback on the device electrical bias procedures specified in method 1001 of MIL-STD-750-1, Barometric Pressure (reduced)’. The purpose of this survey is to obtain input from the DLA Land and Maritime qualified manufacturer community to determine whether additional bias details or information should be specified within the test method. The survey results will be used to improve any test method deficiencies and result in consistent test results.
Over the Southern Ocean (SO, 40˚S-70˚S), climate models have consistently underestimated solar reflection. Here we evaluate the relationship between cloud profiles, cloud phase and radiation over the SO in Coupled Model Intercomparison Project Phase 6 (CMIP6) models against Clouds and the Earth's Radiant Energy System (CERES) and Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO). We find that the lack of solar reflection is slightly improved in CMIP6 models compared to CMIP5’s, attributable to a better representation of cloud fraction and phase. We show that clouds have a different vertical structure and radiative effect south and north of where the 0˚C isotherm meets the surface (~55˚S). Although the models capture the greater vertical extent of clouds south of 55˚S, they fail to reproduce the observed increase in solar reflection, which we pinpoint to cloud phase biases. Increasing CMIP6 supercooled liquid cloud opacity should help reduce their persistent SW biases.
NASA’s Gateway program will build a crew-tended station in an Earth-Moon Near Rectilinear Halo Orbit (NRHO) to support deep space missions to the lunar surface and heliocentric space. The station in the NRHO will be tracked by the Deep Space Network (DSN) with 2-way radiometric tracking data to produce an estimated state that is utilized to target Orbit Maintenance Maneuvers (OMMs). However, the tracking data is corrupted with measurement noise and range bias, which results in state estimation error and OMM execution error. This paper reports on analysis performed to improve the geometry of the tracking data problem with the inclusion of cross-hemispheric partner sites and explores the performance impact of handovers between partner sites and DSN sites. The OMM execution error is estimated directly using a Batch Least Squares (BLS) process, and the range bias estimation is analyzed among both original DSN sites and a combined DSN + partner sites scenario.
It is generally understood that heuristic error hurts the performance of search algorithms, measured in terms of search effort. Hence there is an interest in understanding how to reduce heuristic error. One way to do this is to learn a heuristic from a set of examples of plans generated offline, e.g. bootstrapping methods. In this paper, we consider how some methods for generating examples of plans may skew the training set in the presence of heuristic errors. Initial theoretical results show that duplicate detection is one source of selection bias in the canonical A* algorithm. We introduce a duplicate selection scheme for A* that avoids selection bias in generating cost-optimal examples, without compromising memory efficiency, and develop ideas in the satisficing setting. We evaluate our approach on n x m grids with multiple cost-optimal solutions and synthetic heuristic error. Finally, we attempt to extend these ideas to the problem of generating extreme examples of plans.
A systematic bias causing a statistically significant drift between group delay and phase delay measurements in geodetic Very Long Baseline Interferometry (VLBI)has long been present. The cause of this drift remains unknown, although it is readily reproduced in VLBI experiments including a short baseline such as those conducted with the twin 13-meter telescopes at the Wettzell observatory, given the station names WETTZ13N and WETTZELL. This statistical incompatibility has been an obstacle in adopting phase delays in routine VLBI processing. The aim of this study is to provide additional evidence to aid in identifying the source of this systematic bias. A series of four regular VLBI experiments are processed with both group delays and phase delays, and post fit residuals, estimated positions, and clock functions are presented with and without phase calibration applied. These results are also computed for individual intermediate frequency bands.