Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atomic physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Dissociative electron attachment to 5-bromo-uracil: non-adiabatic dynamics on complex-valued potential energy surfaces

Electron induced dissociation reactions are relevant to many fields, ranging from prebiotic chemistry to cancer treatments. However, the simulation of dissociation electron attachment (DEA) dynamics is very challenging because the auto-ionization widths of the transient negative ions must be accounted for. We propose an adaptation of the ab initio multiple spawning (AIMS) method for complex-valued potential energy surfaces, along the lines of recent developments based on surface hopping dynamics. Our approach combines models for the energy dependence of the auto-ionization widths, obtained from scattering calculations, with survival probabilities computed for the trajectory basis functions employed in the AIMS dynamics. The method is applied to simulate the DEA dynamics of 5-bromouracil in full dimensionality, i.e., taking all the vibrational modes into consideration. The propagation starts on the $π_{2}^{*}$ resonance state and describes the formation of Br - anions mediated by non-adiabatic couplings. The potential energies, gradients and non-adiabatic couplings were computed with the fractional-occupancy molecular orbital complete-active-space configuration-interaction method, and the calculated DEA cross section are consistent with the observed DEA intensities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Single-photoelectron collection efficiency in 4D ultrafast electron microscopy

In femtosecond (fs) 4D ultrafast electron microscopy (UEM), a tradeoff is made between photoelectrons per packet and time resolution. One consequence of this can be longer-than-desirable acquisition times for low-density packets, and particularly for low repetition rates when complete photothermal dissipation is required. Thus, gaining an understanding of photoelectron trajectories in the gun region is important for identifying factors that limit collection efficiency (CE; fraction of photoelectrons that enter the illumination system). Here, we continue our work on the systematic study of photoelectron trajectories in the gun region of a Thermo Fisher/FEI Tecnai Femto UEM, focusing specifically on CE in the single-electron regime. Using General Particle Tracer, calculated field maps, and the exact architecture of the Tecnai Femto UEM, we simulated the effects of fs laser parameters and key gun elements on CE. The results indicate CE strongly depends upon the laser spot size on the source, the (unbiased) Wehnelt aperture diameter, and the incident photon energy. The CE dispersion with laser spot size is found to be strongly dependent on aperture diameter, being nearly dispersionless for the largest apertures. A gun crossover is also observed, with the beam-waist position being dependent on the aperture diameter, further illustrating that the Wehnelt aperture acts as a simple, fixed electrostatic lens in UEM mode. This work provides further insights into the operational aspects of fs 4D UEM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Evaluating fast methods for static polarizabilities on extended conjugated oligomers

Given the importance of accurate polarizability calculations to many chemical applications, coupled with the need for efficiency when calculating the properties of sets of molecules or large oligomers, we present a benchmark study examining possible calculation methods for polarizable materials. We first investigate the accuracy of the additive model used in GFN2, a highly-efficient semi-empirical tight-binding method, and the D4 dispersion model, comparing its predicted additive polarizabilities to ωB97XD results for a subset of PubChemQC and a compiled benchmark set of molecules spanning polarizabilities from approximately 3 Å 3 to 600 Å 3 , with some compounds in the range of approximately 1200–1400 Å 3 . Although we find additive GFN2 polarizabilities, and thus D4, to have large errors with polarizability calculations on large conjugated oligomers, it would appear an empirical quadratic correction can largely remedy this. We also compare the accuracy of DFT polarizability calculations run using basis sets of varying size and level of augmentation, determining that a non-augmented basis set may be used for large, highly polarizable species in conjunction with a linear correction factor to achieve accuracy extremely close to that of aug-cc-pVTZ.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Using genetic algorithms to discover novel ground-state triplet conjugated polymers

Stable ground-state triplet π-conjugated copolymers have many interesting electronic and optoelectronic properties. However, the large number of potential monomer combinations makes it impractical to synthesize or even just use density functional theory (DFT) to calculate their triplet ground-state stability. Furthermore, we present a genetic algorithm implementation that uses the semi-empirical GFN2-xTB to find ground-state triplet polymer candidates. We find more than 1400 polymer candidates with a triplet ground-state stability of up to 4 eV versus the singlet. Additionally, we explore the properties of the monomers of those candidates in order to understand the design rules which promote the formation of a stable ground-state triplet in π-conjugated polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Fundamental data for modeling electron-induced processes in plasma remediation of perfluoroalkyl substances

Plasma treatment of per- and polyfluoroalkyl substances (PFAS) contaminated water is a potentially energy efficient remediation method. In this treatment, an atmospheric pressure plasma interacts with surface-resident PFAS molecules. Developing a reaction mechanism and modeling of plasma–PFAS interactions requires fundamental data for electron–molecule reactions. In this paper, we present results of electron scattering calculations, potential energy landscapes and their implications for plasma modelling of a dielectric barrier discharge in PFAS contaminated gases, a first step towards modelling of plasma–water–PFAS intereactions. It is found that the plasma degradation of PFAS is dominated by dissociative electron attachment with the importance of other contributing processes varying depending on the molecule. All molecules posses a large number of shape resonances – transient negative ion states – from near-threshold up to ionization threshold. These states lie in the region of the most probable electron energies in the plasma (4–5 eV) and consequently are expected to further enhance the fragmentation dynamics in both dissociative attachment and dissociative excitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Non-adiabatic quantum interference and complex formation in ultracold collisions of Rb with KRb

Ultracold elastic collisions of 87 Rb with 40 K 87 Rb in its ground vibrational and rotational state are investigated using a first principles based theoretical methodology. Full-dimensional ab initio computed potential energy surfaces are reported that include the two lowest-lying electronic states, their conical intersection, non-adiabatic couplings and an accurate long-range behavior. A numerically exact time-independent quantum dynamics method in hyperspherical coordinates is used to compute the elastic scattering cross sections, rate coefficients and collision lifetime spectrum. The quantum scattering calculations include all degrees of freedom and treat both electronic states and their non-adiabatic couplings using a two-state diabatic representation. The theoretically computed elastic rate coefficient is in good agreement with the recently reported experimental value. Significant non-adiabatic quantum interference effects are shown to originate from the unique properties of ultracold collisions and the geometric phase associated with the conical intersection. A high-resolution collision energy grid is used to investigate the origin of the experimentally reported long-lived 3-body collision complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Generation of ultrafast electron bunch trains via trapping into multiple periods of plasma wakefields

We demonstrate a novel approach to the generation of femtosecond electron bunch trains via laser-driven wakefield acceleration. We use two independent high-intensity laser pulses, a drive, and an injector, each creating their own plasma wakes. The interaction of the laser pulses and their wakes results in a periodic injection of free electrons in the drive plasma wake via several mechanisms, including ponderomotive drift, wake-wake interference, and pre-acceleration of electrons directly by strong laser fields. Electron trains were generated with up to four quasi-monoenergetic bunches, each separated in time by a plasma period. In conclusion, the time profile of the generated trains is deduced from an analysis of beam loading and confirmed using 2D particle-in-cell simulations

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Assessing density functionals for describing methane dissociative chemisorption on Pt(110)-(2×1) surface

In this work, we explore the suitability of several density functionals with the generalized gradient approximation (GGA) and beyond for describing the dissociative chemisorption of methane on the reconstructed Pt(110)-(2×1) surface. The bulk and surface structures of the metal, methane adsorption energy, and dissociation barrier are used to assess the functionals. A van der Waals corrected GGA functional (optPBE-vdW) and a metaGGA functional with van der Waals correction (MS PBEl-rVV10) are selected for ab initio molecular dynamics calculations of the sticking probability. Our results suggest that the use of these two functionals may lead to a better agreement with existing experimental results, thus serving as a good starting point for future development of reliable machine-learned potential energy surfaces for the dissociation of methane on the Pt(110)-(2×1) surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Quantization effects in semiconductor nanostructures and singlet fission in molecular chromophores for photovoltaics and solar fuels

Hot carriers in semiconductors are electrons and/or holes that have energies greater than carriers that reside at the top and bottom of the conduction and valence bands, respectively; the latter carriers are in equilibrium with the lattice and have a temperature equal to the lattice (ambient) temperature. Hot carriers are created in semiconductors upon the absorption of photons with energies greater than the bandgap. The excess energy above the bandgap energy is in the form of kinetic energy. The hot carriers can cool to the lattice temperature via electron–phonon scattering and establish separate Boltzmann distributions for electrons and holes at the band edges. Thus, upon cooling, the excess kinetic energy of the hot carriers is transformed into heat and is unavailable to be converted into electrical or chemical free energy in a solar photon-converting cell. This hot-carrier cooling process significantly limits the maximum possible power conversion efficiency (PCE) of the free energy of solar photons into electrical free energy or chemical free energy in chemical bonds of fuels. However, if hot-carrier cooling can be slowed such that the hot carriers can be extracted before cooling to create higher photovoltages, or utilized to create additional electron-hole pairs through carrier multiplication, then beneficial use can be made of the excess energy of hot carriers and the maximum thermodynamic PCE can be dramatically increased. Quantization effects in semiconductor nanostructures, unique properties of some bulk semiconductors, and exciton multiplication in both semiconductors and molecular chromophores that undergo singlet fission have shown a path forward for potential dramatic increases in the PCEs of solar photons into electricity and solar fuels. The status, history, and future promise of the science and technology of these future approaches for different types of photovoltaic cells and cells for solar fuels will be discussed.

14 SOLAR ENERGY↗
DOE OSTI2020

Ab Initio Methods for L-edge X-ray Absorption Spectroscopy

The theoretical prediction of X-ray absorption spectra (XAS) has become common- place in electronic structure theory. The ability to better model and understand L-edge spectra is of great interest in the study of transition metal complexes and a wide variety of solid state materials. However, until recently few rst-principles works have mod- eled L-edge XAS due to the presence of strong spin-orbit coupling in the 2p orbitals which splits the observed peaks into multiple groups of features. Therefore, a proper description of spin-orbit coupling is vital for the successful prediction of L-edge spectra. A number of new approaches that incorporate spin-orbit coupling have recently made advances in the computation of L-edge spectra. In this review, we describe recent work in computational L-edge XAS and how these methods may continue to improve in the future. Comparison of the advantages and disadvantages of the various approaches are considered, with special attention to not only the computational cost of the level of theory, but also the various approaches that can be used to compute the absorption spectra with a large number of high energy excited states.

Kasper, Joseph M.↗
DOE OSTI2022

Computational optimal transport for molecular spectra: The semi-discrete case

Comparing a discrete molecular spectrum to a continuous molecular spectrum in a quantitative manner is a challenging problem, for example, when attempting to fit a theoretical stick spectrum to a continuous spectrum. In this paper, the use of computational optimal transport is investigated for such a problem. In the optimal transport literature, the comparison of a discrete and a continuous spectrum is referred to as semi-discrete optimal transport and is a situation where a metric such as least-squares may be difficult to define except under special conditions. The merits of an optimal transport approach for this problem are investigated using the transport distance defined for the semi-discrete case. A tutorial on semi-discrete optimal transport for molecular spectra is included in this paper, and several well-chosen synthetic spectra are investigated to demonstrate the utility of computational optimal transport for the semi-discrete case. Among several types of investigations, we include calculations showing how the frequency resolution of the continuous spectrum affects the transport distance between a discrete and a continuous spectrum. We also use the transport distance to measure the distance between a continuous experimental electronic absorption spectrum of SO 2 and a theoretical stick spectrum for the same system. The comparison of the theoretical and experimental SO 2 spectra also allows us to suggest a theoretical value for the band origin that is closer to the observed band origin than previous theoretical values.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Sub-keV design for the National Ignition Facility’s soft x-ray Opacity Spectrometer (OpSpec) and expansion plans for time-resolved measurements

When compared with the National Ignition Facility’s (NIF) original soft x-ray opacity spectrometer, which used a convex cylindrical design, an elliptically shaped design has helped to increase the signal-to-noise ratio and eliminated nearly all reflections from alternate crystal planes. The success of the elliptical geometry in the opacity experiments has driven a new elliptical geometry crystal with a spectral range covering 520–1100 eV. When coupled with the primary elliptical geometry, which spans 1000–2100 eV, the new sub-keV elliptical geometry helps to cover the full iron L-shell and major oxygen transitions important to solar opacity experimentation. The new design has been built and tested by using a Henke x-ray source and shows the desired spectral coverage. Additional plans are underway to expand these opacity measurements into a mode of time-resolved detection, ~1 ns gated, but considerations for the detector size and photometrics mean a crystal geometry redesign. Here, the new low-energy geometry, including preliminary results from the NIF opacity experiments, is presented along with the expansion plans into a time-resolved platform.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Importance of imposing gauge invariance in time-dependent density functional theory calculations with meta-generalized gradient approximations

It has been known for more than a decade that the gauge variance of the kinetic energy density τ leads to additional terms in the magnetic orbital rotation Hessian used in linear-response time-dependent density functional theory (TDDFT), affecting excitation energies obtained with τ-dependent exchange–correlation functionals. While previous investigations found that a correction scheme based on the paramagnetic current density has a small effect on benchmark results, we report more pronounced effects here, in particular, for the popular M06-2X functional and for some other meta-generalized gradient approximations (mGGAs). In the first part of this communication, this is shown by a reassessment of a set of five Ni(II) complexes for which a previous benchmark study that did not impose gauge invariance has found surprisingly large errors for excitation energies obtained with M06-2X. These errors are more than halved by restoring gauge invariance. The variable importance of imposing gauge invariance for different mGGA-based functionals can be rationalized by the derivative of the mGGA exchange energy integrand with respect to τ. In the second part, a large set of valence excitations in small main-group molecules is analyzed. For M06-2X, several selected n → π* and π→π$^{*}_{⊥}$ excitations are heavily gauge-dependent with average changes of –0.17 and –0.28 eV, respectively, while π→π$^{*}_{∥}$ excitations are marginally affected (–0.04 eV). Similar patterns, but of the opposite signs, are found for SCAN0. Here, the results suggest that reevaluation of previous gauge variant TDDFT results based on M06-2X and other mGGA functionals is warranted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Toward direct spatial and intensity characterization of ultra-high-intensity laser pulses using ponderomotive scattering of free electrons

Spatial distributions of electrons ionized and scattered from ultra-low-pressure gases are proposed and experimentally demonstrated as a method to directly measure the intensity of an ultra-high-intensity laser pulse. Analytic models relating the peak scattered electron energy to the peak laser intensity are derived and compared to paraxial Runge–Kutta simulations highlighting two models suitable for describing electrons scattered from weakly paraxial beams (f#>5) for intensities in the range of 1018−1021 W cm−2. Scattering energies are shown to be dependent on gas species, emphasizing the need for specific gases for given intensity ranges. Direct measurements of the laser intensity at full power of two laser systems are demonstrated, both showing a good agreement between indirect methods of intensity measurement and the proposed method. One experiment exhibited the role of spatial aberrations in the scattered electron distribution, motivating a qualitative study on the effect. We propose the use of convolutional neural networks as a method for extracting quantitative information on the spatial structure of the laser at full power. We believe the presented technique to be a powerful tool that can be immediately implemented in many high-power laser facilities worldwide.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Computational optimal transport for molecular spectra: The fully continuous case

Computational optimal transport is used to analyze the difference between pairs of continuous molecular spectra. It is demonstrated that transport distances which are derived from this approach may be a more appropriate measure of the difference between two continuous spectra than more familiar measures of distance under many common circumstances. Associated with the transport distances is the transport map which provides a detailed analysis of the difference between two molecular spectra and is a key component of our study of quantitative differences between two continuous spectra. The use of optimal transport for comparing molecular spectra is developed in detail here with a set of model spectra, so that the discussion is self-contained. The difference between the transport distance and more common definitions of distance is elucidated for some well-chosen examples and it is shown where transport distances may be very useful alternatives to standard definitions of distance. The transport distance between a theoretical and experimental electronic absorption spectrum for SO 2 is studied and it is shown how the theoretical spectrum can be modified to fit the experimental spectrum better adjusting the theoretical band origin and the resolution of the theoretical spectrum. In conclusion, this analysis includes the calculation of transport maps between the theoretical and experimental spectra suggesting future applications of the methodology.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Estimates of global recycling coefficients for LTX- β discharges

We report the first observation of global recycling coefficient R near 0.5 in the Lithium Tokamak eXperiment-β (LTX-β), significantly below the minimum R previously reported in other devices. In a series of experiments with varied Li wall conditioning, estimates of the recycling coefficient have been made using a Lyman-α array and DEGAS2 modeling. A progressive reduction in Lyman-α emission with increased lithium and an increase in edge electron temperature are observed. It is also observed that with increasing Li coating thickness, the effective particle confinement time τp* is reduced and approaches TRANSP calculated energy confinement time (τE), with τp* near τE,TRANSP for the lowest recycling coefficients. Edge temperatures approaching core plasma temperatures, first reported in LTX, can now be directly connected to estimates of the recycling coefficient and qualitatively agree with previous UEDGE simulations. The particle flux to the limiting surfaces appears to be significantly reduced in comparison with fluid scrape-off layer (SOL) models, indicating that a large fraction of the SOL ions are mirror trapped. SOL collisionality drops more than an order of magnitude below the banana regime boundary, indicating the importance of kinetic effects. Full-f 1x2v gyrokinetic simulations of SOL field lines with the GKEYLL code indicate that the fraction of ions trapped along field lines increases as collisionality drops, as a result of increased lithium evaporation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗