Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ambient temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Electrochemical reduction of acetonitrile to ethylamine

Electrifying chemical manufacturing using renewable energy is an attractive approach to reduce the dependence on fossil energy sources in chemical industries. Primary amines are important organic building blocks; however, the synthesis is often hindered by the poor selectivity because of the formation of secondary and tertiary amine byproducts. Herein, we report an electrocatalytic route to produce ethylamine selectively through an electroreduction of acetonitrile at ambient temperature and pressure. Among all the electrocatalysts, Cu nanoparticles exhibit the highest ethylamine Faradaic efficiency (~96%) at -0.29 V versus reversible hydrogen electrode. Under optimal conditions, we achieve an ethylamine partial current density of 846 mA cm -2 . A 20-hour stable performance is demonstrated on Cu at 100 mA cm -2 with an 86% ethylamine Faradaic efficiency. Moreover, the reaction mechanism is investigated by computational study, which suggests the high ethylamine selectivity on Cu is due to the moderate binding affinity for the reaction intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The critical role of ultra-low-energy vibrations in the relaxation dynamics of molecular qubits

Improving the performance of molecular qubits is a fundamental milestone towards unleashing the power of molecular magnetism in the second quantum revolution. Taming spin relaxation and decoherence due to vibrations is crucial to reach this milestone, but this is hindered by our lack of understanding on the nature of vibrations and their coupling to spins. Here we propose a synergistic approach to study a prototypical molecular qubit. It combines inelastic X-ray scattering to measure phonon dispersions along the main symmetry directions of the crystal and spin dynamics simulations based on DFT. We show that the canonical Debye picture of lattice dynamics breaks down and that intra-molecular vibrations with very-low energies of 1-2 meV are largely responsible for spin relaxation up to ambient temperature. We identify the origin of these modes, thus providing a rationale for improving spin coherence. The power and flexibility of our approach open new avenues for the investigation of magnetic molecules with the potential of removing roadblocks toward their use in quantum devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ultra-strong tungsten refractory high-entropy alloy via stepwise controllable coherent nanoprecipitations

High-performance refractory alloys with ultrahigh strength and ductility are in demand for a wide range of critical applications, such as plasma-facing components. However, it remains challenging to increase the strength of these alloys without seriously compromising their tensile ductility. Here, we put forward a strategy to “defeat” this trade-off in tungsten refractory high-entropy alloys by stepwise controllable coherent nanoprecipitations (SCCPs). The coherent interfaces of SCCPs facilitate the dislocation transmission and relieve the stress concentrations that can lead to premature crack initiation. As a consequence, our alloy displays an ultrahigh strength of 2.15 GPa with a tensile ductility of 15% at ambient temperature, with a high yield strength of 1.05 GPa at 800 °C. The SCCPs design concept may afford a means to develop a wide range of ultrahigh-strength metallic materials by providing a pathway for alloy design.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Stable laser-acceleration of high-flux proton beams with plasma collimation

Laser-plasma acceleration of protons offers a compact, ultra-fast alternative to conventional ac- celeration techniques, and is being widely pursued for potential applications in medicine, industry and fundamental science. Creating a stable, collimated beam of protons at high repetition rates presents a key challenge. Here, we demonstrate the generation of multi-MeV proton beams from a fast-replenishing ambient-temperature liquid sheet. The beam has an unprecedentedly low diver- gence of 1◦ (≤ 20 mrad), resulting from magnetic self-guiding of the proton beam during propagation through a low density vapour. The proton beams, generated at a repetition rate of 5 Hz using only 190 mJ of laser energy, exhibit a hundred-fold increase in flux compared to beams from a solid target. Coupled with the high shot-to-shot stability of this source, this represents a crucial step towards applications.

Glenn, G. D. [SLAC National Accelerator Laboratory↗
DOE OSTI2019

Evaporated tellurium thin films for p-type field-effect transistors and circuits

There is an emerging need for semiconductors that can be processed at near ambient temperature with high mobility and device performance. Although multiple n-type options have been identified, the development of their p-type counterparts remains limited. In this paper, we report the realization of tellurium thin films through thermal evaporation at cryogenic temperatures for fabrication of high-performance wafer-scale p-type field-effect transistors. We achieve an effective hole mobility of ~35 cm 2 V –1 s –1 , on/off current ratio of ~10 4 and subthreshold swing of 108 mV dec –1 on an 8-nm-thick film. High-performance tellurium p-type field-effect transistors are fabricated on a wide range of substrates including glass and plastic, further demonstrating the broad applicability of this material. Significantly, three-dimensional circuits are demonstrated by integrating multi-layered transistors on a single chip using sequential lithography, deposition and lift-off processes. Finally, various functional logic gates and circuits are demonstrated.

42 ENGINEERING↗
DOE OSTI2022

Chemical crystallography by serial femtosecond X-ray diffraction

Abstract Inorganic–organic hybrid materials represent a large share of newly reported structures, owing to their simple synthetic routes and customizable properties 1 . This proliferation has led to a characterization bottleneck: many hybrid materials are obligate microcrystals with low symmetry and severe radiation sensitivity, interfering with the standard techniques of single-crystal X-ray diffraction 2,3 and electron microdiffraction 4–11 . Here we demonstrate small-molecule serial femtosecond X-ray crystallography (smSFX) for the determination of material crystal structures from microcrystals. We subjected microcrystalline suspensions to X-ray free-electron laser radiation 12,13 and obtained thousands of randomly oriented diffraction patterns. We determined unit cells by aggregating spot-finding results into high-resolution powder diffractograms. After indexing the sparse serial patterns by a graph theory approach 14 , the resulting datasets can be solved and refined using standard tools for single-crystal diffraction data 15–17 . We describe the ab initio structure solutions of mithrene (AgSePh) 18–20 , thiorene (AgSPh) and tethrene (AgTePh), of which the latter two were previously unknown structures. In thiorene, we identify a geometric change in the silver–silver bonding network that is linked to its divergent optoelectronic properties 20 . We demonstrate that smSFX can be applied as a general technique for structure determination of beam-sensitive microcrystalline materials at near-ambient temperature and pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Iridium Corroles Exhibit Weak Near-Infrared Phosphorescence but Efficiently Sensitize Singlet Oxygen Formation

Six-coordinate iridium(III) triarylcorrole derivatives, Ir[T p XPC)]L 2 , where T p XPC = tris( para -X-phenyl)corrole (X = CF 3 , H, Me, and OCH 3 ) and L = pyridine (py), trimethylamine (tma), isoquinoline (isoq), 4-dimethylaminopyridine (dmap), and 4-picolinic acid (4pa), have been examined, with a view to identifying axial ligands most conducive to near-infrared phosphorescence. Disappointingly, the phosphorescence quantum yield invariably turned out to be very low, about 0.02 – 0.04% at ambient temperature, with about a two-fold increase at 77 K. Phosphorescence decay times were found to be around ~5 µs at 295 K and ~10 µs at 77 K. Fortunately, two of the Ir[T p CF 3 PC)]L 2 derivatives, which were tested for their ability to sensitize singlet oxygen formation, were found to do so efficiently with quantum yields Φ( 1 O 2 ) = 0.71 and 0.38 for L = py and 4pa, respectively. Iridium corroles thus may hold promise as photosensitizers in photodynamic therapy (PDT). The possibility of varying the axial ligand and of attaching biotargeting groups at the axial positions makes iridium corroles particularly exciting as PDT drug candidates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structural insight into host plasma membrane association and assembly of HIV-1 matrix protein

Oligomerization of Pr55 Gag is a critical step of the late stage of the HIV life cycle. It has been known that the binding of IP6, an abundant endogenous cyclitol molecule at the MA domain, has been linked to the oligomerization of Pr55 Gag . However, the exact binding site of IP6 on MA remains unknown and the structural details of this interaction are missing. Here, we present three high-resolution crystal structures of the MA domain in complex with IP6 molecules to reveal its binding mode. Additionally, extensive Differential Scanning Fluorimetry analysis combined with cryo- and ambient-temperature X-ray crystallography and GNM-based transfer entropy calculations identify the key residues that participate in IP6 binding. Our data provide novel insights about the multilayered HIV-1 virion assembly process that involves the interplay of IP6 with PIP2, a phosphoinositide essential for the binding of Pr55 Gag to membrane. IP6 and PIP2 have neighboring alternate binding sites within the same highly basic region (residues 18–33). This indicates that IP6 and PIP2 bindings are not mutually exclusive and may play a key role in coordinating virion particles’ membrane localization. Based on our three different IP6-MA complex crystal structures, we propose a new model that involves IP6 coordination of the oligomerization of outer MA and inner CA domain’s 2D layers during assembly and budding.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Trimethyloxonium-mediated methylation strategies for the rapid and simultaneous analysis of chlorinated phenols in various soils by electron impact gas chromatography–mass spectrometry

Abstract The efficient methylation of a panel of five industrial and environmentally-relevant chlorophenols (CPs) employing trimethyloxonium tetrafluoroborate (TMO) for their qualitative detection and identification by electron impact gas chromatography–mass spectrometry (EI-GC–MS) is presented. The protocol’s execution is simple and smoothly converts the phenols into their O-methylated counterparts conveniently at ambient temperature. The efficiency of two versions of the protocol was successfully tested in their ability to simultaneously derivatize five CPs (2-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, pentachlorophenol and triclosan) in six distinct, separate soil matrices (Nebraska EPA standard soil, Virginia Type A soil, Ottawa sand, Baker sand, Silt and Georgia EPA standard soil) when present at low levels (~ 10 μgg −1 ). The first version involves the direct derivatization of the spiked soils with the methylating salt while the second one involves an initial soil extraction step of the CPs followed by methylation. The MDL values for each methylated CP were determined and lower values were found (4.1–13.2 ng . mL −1 ) for both sand matrices (Ottawa and Baker) as well as for the Georgia EPA standard soil, while larger values (8.2–21.8 ng . mL −1 ) were found for the Virginia Type soil, Nebraska EPA standard soil and Silt. The presented protocol offers a safer and more practical alternative to the universally employed diazomethane method and can be readily applicable to matrices other than soils. Furthermore, the protocols described herein may find applicability to the methylation of other analytes bearing acidic protons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Heterogeneous climate change impacts on electricity demand in world cities circa mid-century

Rising ambient temperatures due to climate change will increase urban populations’ exposures to extreme heat. During hot hours, a key protective adaptation is increased air conditioning and associated consumption of electricity for cooling. But during cold hours, milder temperatures have the offsetting effect of reducing consumption of electricity and other fuels for heating. We elucidate the net consequences of these opposing effects in 36 cities in different world regions. We couple reduced-form statistical models of cities’ hourly responses of electric load to temperature with temporally downscaled projections of temperatures simulated by 21 global climate models (GCMs), projecting the effects of warming on the demand for electricity circa 2050. Cities' responses, temperature exposures and impacts are heterogeneous, with changes in total annual consumption ranging from –2.7 to 5.7%, and peak power demand increasing by as much as 9.5% at the multi-GCM median. The largest increases are concentrated in more economically developed mid-latitude cities, with less developed urban areas in the tropics exhibiting relatively small changes. The results highlight the important role of the structure of electricity demand: large temperature increases in tropical cities are offset by their inelastic responses, which can be attributed to lower air-conditioning penetration.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

White Laue and powder diffraction studies to reveal mechanisms of HCP-to-BCC phase transformation in single crystals of Mg under high pressure

Mechanisms of hexagonal close-packed (HCP) to body-centered cubic (BCC) phase transformation in Mg single crystals are observed using a combination of polychromatic beam Laue diffraction and monochromatic beam powder diffraction techniques under quasi-hydrostatic pressures of up to 58 ± 2 GPa at ambient temperature. Although experiments were performed with both He and Ne pressure media, crystals inevitably undergo plastic deformation upon loading to 40–44 GPa. The plasticity is accommodated by dislocation glide causing local misorientations of up to 1°–2°. The selected crystals are tracked by mapping Laue diffraction spots up to the onset of the HCP to BCC transformation, which is determined to be at a pressure of 56.6 ± 2 GPa. Intensity of the Laue reflections from HCP crystals rapidly decrease but no reflections from crystalline BCC phase are observed with a further increase of pressure. Nevertheless, the powder diffraction shows the formation of 110 BCC peak at 56.6 GPa. The peak intensity increases at 59.7 GPa. Upon the full transformation, a powder-like BCC aggregate is formed revealing the destructive nature of the HCP to BCC transformation in single crystals of Mg.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Disturbance of hibernating bats due to researchers entering caves to conduct hibernacula surveys

Estimating population changes of bats is important for their conservation. Population estimates of hibernating bats are often calculated by researchers entering hibernacula to count bats; however, the disturbance caused by these surveys can cause bats to arouse unnaturally, fly, and lose body mass. We conducted 17 hibernacula surveys in 9 caves from 2013 to 2018 and used acoustic detectors to document cave-exiting bats the night following our surveys. We predicted that cave-exiting flights (i.e., bats flying out and then back into caves) of Townsend’s big-eared bats (Corynorhinus townsendii) and western small-footed myotis (Myotis ciliolabrum) would be higher the night following hibernacula surveys than on nights following no surveys. Those two species, however, did not fly out of caves more than predicted the night following 82% of surveys. Nonetheless, the activity of bats flying out of caves following surveys was related to a disturbance factor (i.e., number of researchers × total time in a cave). We produced a parsimonious model for predicting the probability of Townsend’s big-eared bats flying out of caves as a function of disturbance factor and ambient temperature. That model can be used to help biologists plan for the number of researchers, and the length of time those individuals are in a cave to minimize disturbing bats.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Pressure induced irreversible phase transformation in an ordered high-entropy alloy

We report on a pressure induced irreversible phase transformation in an ordered eutectic high-entropy alloy (EHEA) AlCoCrFeNi2.1. The suction cast sample was synthesized by arc melting of raw elements resulting in an ordered B2 and FCC phase mixture for eutectic AlCoCrFeNi2.1 alloy. This phase mixture was confirmed by transmission electron microscopy (TEM) where superlattice reflections corresponding to ordered B2 phase were observed while the FCC phase remains disordered. The B2 phase was observed to be enriched in Nickel and Aluminum while the surrounding FCC phase is enriched in Fe, Cr and Co. The suction-cast EHEA sample was studied by X-ray diffraction under high pressure in a diamond anvil cell with platinum pressure marker to 73 GPa at ambient temperature. The B2 to FCC phase transformation is completed by 3 GPa in sharp contrast to BCC to FCC phase transition of 21 GPa in additively manufactured EHEA samples. The X-ray diffraction and TEM studies of pressure recovered samples show presence of only FCC grains without any specific orientation with respect to starting sample. These results are consistent with molecular dynamics simulations that the presence of B2 phase aids in the formation of the B2 to FCC phase transition under high pressures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ammonia synthesis by photocatalytic hydrogenation of a N 2 -derived molybdenum nitride

Although metal complexes are known to split dinitrogen at ambient temperature and pressure, the synthesis of ammonia from these compounds and using H 2 as the terminal reductant has been rarely achieved. Here, we report photocatalytic ammonia synthesis from a N 2 -derived terminal molybdenum nitride and by using H 2 as the terminal reductant. An iridium hydride photocatalyst mediates the reaction upon irradiation with blue light. A molybdenum pentahydride was identified as the principal metal product arising following ammonia release. Conversion of the molybdenum pentahydride back to the terminal molybdenum nitride was accomplished in three-steps and completes a synthetic cycle for NH3 formation from N 2 and H 2 . Mechanistic investigations support a pathway involving photoexcitation of the iridium hydride and subsequent energy transfer rather than electron transfer. Deuterium labelling confirmed H 2 as the source of the N–H bonds. This photodriven, proton coupled electron transfer allows the use of H 2 as the terminal reductant for catalytic formation of NH 3 from N 2 using metal catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Giant spin Seebeck effect through an interface organic semiconductor

Interfacing an organic semiconductor C 60 with a non-magnetic metallic thin film (Cu or Pt) has created a novel heterostructure that is ferromagnetic at ambient temperature, while its interface with a magnetic metal (Fe or Co) can tune the anisotropic magnetic surface property of the material. Here, we demonstrate that sandwiching C60 in between a magnetic insulator (Y 3 Fe 5 O 12 :YIG) and a non-magnetic, strong spin–orbit metal (Pt) promotes highly efficient spin current transport via the thermally driven spin Seebeck effect (SSE). Experiments and first principles calculations consistently show that the presence of C 60 reduces significantly the conductivity mismatch between YIG and Pt and the surface perpendicular magnetic anisotropy of YIG, giving rise to enhanced spin mixing conductance across YIG/C 60 /Pt interfaces. As a result, a 600% increase in the SSE voltage (V LSSE ) has been realized in YIG/C 60 /Pt relative to YIG/Pt. Temperature-dependent SSE voltage measurements on YIG/C 60 /Pt with varying C 60 layer thicknesses also show an exponential increase in V LSSE at low temperatures below 200 K, resembling the temperature evolution of spin diffusion length of C 60 . Our report emphasizes the important roles of the magnetic anisotropy and the spin diffusion length of the intermediate layer in the SSE in YIG/C 60 /Pt structures, providing a new pathway for developing novel spin-caloric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cathodic NH 4 + leaching of nitrogen impurities in CoMo thin-film electrodes in aqueous acidic solutions

Electrocatalytic reduction of dinitrogen (N 2 ) to ammonium (NH 4 + ) in acidic aqueous solutions was investigated at ambient temperature and pressure using a cobalt–molybdenum (CoMo) thin-film electrode prepared by magnetron reactive sputtering. Increased concentrations of ammonium ions (NH 4 + ) were consistently detected in the electrolyte using ion chromatography (IC) after constant-potential electrolysis at various potentials (≤-0.29 V vs. RHE). Using a newly developed analytical method based on ammonia derivatization, performing the experiments with 15 N 2 -labelled gas led however to the detection of increased 14 NH 4 + concentrations instead of 15 NH 4 + . X-ray photoelectron spectroscopic (XPS) analysis of the electrode surface revealed the presence of Mo[triple bond, length as m-dash]N and Mo–NH x species. Several contamination sources were identified that led to substantial increases in the concentration of ammonium ions, including 15 NH 3 impurities in 15 N 2 gas. The observed ammonium concentrations can be consistently ascribed to leaching of nitrogen ( 14 N) impurities incorporated in the CoMo film during the sputtering process. Therefore, researchers in the field are urged to adopt extended protocols to identify and eliminate sources of ammonia contamination and to very carefully monitor the ammonium concentrations in each experimental step.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enabling electrochemical N 2 reduction to NH 3 in the low overpotential region using non-noble metal Bi electrodes via surface composition modification

The electrochemical N 2 reduction reaction (ENRR) that can produce NH 3 using water as the hydrogen source at ambient temperature and pressure can be an exciting alternative to the Haber–Bosch process. The major challenge for electrochemical NH 3 production is the competing hydrogen evolution reaction (HER), which seriously limits the faradaic efficiency (FE) for NH 3 production. To date, noble metal electrocatalysts that are inactive for the HER have mainly been investigated for the ENRR. Studies reporting a FE greater than 10% for NH 3 production using non-noble metal catalysts in the low overpotential region (E ≤ 0.2 V vs. RHE) are very rare. This study reports effective electrochemical surface modification strategies that drastically increase the ENRR activity of a non-noble Bi electrode in the low overpotential region and achieve a FE for NH 3 production as high as 13.2% at -0.2 V vs. RHE in pH 7.5 phosphate buffer. Finally, the effect of each of the surface modifications on the activity for the ENRR and the electrode stability during the ENRR were systematically elucidated, which may be used to develop general strategies to enhance the ENRR activities of other non-noble metal electrodes in the low overpotential region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Development and application of ReaxFF methodology for understanding the chemical dynamics of metal carbonates in aqueous solutions

A new ReaxFF reactive force field has been developed for metal carbonate systems including Na + , Ca 2+ , and Mg 2+ cations and the CO 3 2– anion. This force field is fully transferable with previous ReaxFF water and water/electrolyte descriptions. The Me–O–C (Me = metal) three-body valence angle parameters and Me–C non-reactive parameters of the force field have been optimized against quantum mechanical calculations including equations of state, heats of formation, heats of reaction, angle distortions and vibrational frequencies. The new metal carbonate force field has been validated using molecular dynamics simulations to study the solvation and reactivity of metal and carbonate ions in water at 300 K and 700 K. The coordination radius and self-diffusion coefficient show good consistency with existing experimental and simulation results. The angular distribution analysis explains the structural preference of carbonate ions to form carbonates and bicarbonates, where Na + predominantly forms carbonates due to weaker angular strain, while Ca 2+ and Mg 2+ prefer to form bicarbonate monodentate in nature. Residence time distribution analyses on different systems reveal the role of ions in accelerating and decelerating the dynamics of water and carbonate ions under different thermodynamic conditions. The formation and dissolution of bicarbonates and carbonates in solution were explored on the basis of the protonation capability in different systems. Here, the nucleation phenomenon of metal carbonates at ambient and supercritical conditions is explained from the perspective of cluster formation over time: Ca 2+ ions can form prenucleation clusters at ambient temperature but show saturation with increasing temperature, whereas Na + and Mg 2+ ions show a rapid increase in cluster size and amount upon increasing time and temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗