Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “alternative energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Reverse Brayton Cycle with Bladeless Turbo Compressor for Automotive Environmental Cooling

An automotive cabin cooling system uses a bladeless turbocompressor driven by automobile engine exhaust to compress incoming ambient air. The compressed air is directed to an intercooler where it is cooled and then to another bladeless turbine used as an expander where the air cools as it expands and is directed to the cabin interior. Excess energy may be captured by an alternator couple to the expander turbine. The system employs no chemical refrigerant and may be further modified to include another intercooler on the output of the expander turbine to isolate the cooled cabin environment.

Cepeda-Rizo, Juan↗
DOE OSTI2026

INL Intern Poster Session

Characterization of off-gas constituents from nuclear fuel reprocessing can be measured using a residual gas analyzer. Characterization of this off-gas is important in a closed fuel cycle, where gasses such as Nox, Kr, I, and C-14 need to be removed from reprocessing plants to meet regulatory requirements. Both Kr and Xe have low chemical reactivity, making capture and separation difficult. Solid sorbents can be used to capture these gases as an alternative to cryogenic distillation, which is energy intensive and hazardous. AgZ-PAN and HZ-PAN are two solid sorbents that have demonstrated selective capture of Xe and Kr. A residual gas analyzer can be used to obtain breakthrough curves that demonstrate how well this adsorption and separation occur. The breakthrough curve is dependent on packing density, column size, and flow rate. Data obtained from the RGA was verified with a gas chromatographer.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Distributed Energy Resource Integration

This webinar focuses on the subject of DER integration, outlining the current industry state of the art and status of DER adoption in the US, a holistic view and roadmap of DER integration, DER interconnection standards, interconnection screening and study processes, interconnection automation, DER hosting capacity, AMI analytics, and non-wires alternatives.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1998

Effect of track structure and radioprotectors on the induction of oncogenic transformation in murine fibroblasts by heavy ions

The oncogenic potential of high-energy 56Fe particles (1 GeV/nucleon) accelerated with the Alternating Gradient Synchrotron at the Brookhaven National Laboratory was examined utilizing the mouse C3H 10T1/2 cell model. The dose-averaged LET for high-energy 56Fe is estimated to be 143 keV/micrometer with the exposure conditions used in this study. For 56Fe ions, the maximum relative biological effectiveness (RBEmax) values for cell survival and oncogenic transformation were 7.71 and 16.5 respectively. Compared to 150 keV/micrometer 4He nuclei, high-energy 56Fe nuclei were significantly less effective in cell killing and oncogenic induction. The prostaglandin E1 analog misoprostol, an effective oncoprotector of C3H 10T1/2 cells exposed to X rays, was evaluated for its potential as a radioprotector of oncogenic transformation with high-energy 56Fe. Exposure of cells to misoprostol did not alter 56Fe cytotoxicity or the rate of 56Fe-induced oncogenic transformation.

NASA Discipline Radiation Health↗
NASA NTRS2023

Drought-Tolerant Succulent Plants as an Alternative Crop Under Future Global Warming Scenarios in Sub-Saharan Africa

Globally, we are facing an emerging climate crisis, with impacts to be notably felt in semiarid regions across the world. Cultivation of drought-adapted succulent plants has been suggested as a nature-based solution that could: (i) reduce land degradation, (ii) increase agricultural diversification and provide both economic and environmentally sustainable income through derived bioproducts and bioenergy, (iii) help mitigate atmospheric CO 2 emissions and (iv) increase soil sequestration of CO 2 . Identifying where succulents can grow and thrive is an important prerequisite for the advent of a sustainable alternative ‘bioeconomy’. Here, we first explore the viability of succulent cultivation in Africa under future climate projections to 2100 using species distribution modelling to identify climatic parameters of greatest importance and regions of environmental suitability. Minimum temperatures and temperature variability are shown to be key controls in defining the theoretical distribution of three succulent species explored, and under both current and future SSP5 8.5 projections, the conditions required for the growth of at least one of the species are met in most parts of sub-Saharan Africa. These results are supplemented with an analysis of potentially available land for alternative succulent crop cultivation. In total, up to 1.5 billion ha could be considered ecophysiologically suitable and available for succulent cultivation due to projected declines in rangeland biomass and yields of traditional crops. These findings may serve to highlight new opportunities for farmers, governments and key stakeholders in the agriculture and energy sectors to invest in sustainable bioeconomic alternatives that deliver on environmental, social and economic goals.

agriculture↗
DOE OSTI2024

Implementation and validation of optimal start control strategy for air conditioners and heat pumps

Commercial buildings are responsible for approximately 20 % of the total energy consumption and greenhouse gas emissions in the United States. Over 85 % of these buildings lack building automation systems, and many are small (<50,000 square feet), underserved, and use rooftop units (RTUs) for heating, ventilation, and air-conditioning needs. Because these buildings lack proper energy management systems, several operational deficiencies lead to excess energy consumption. Studies have shown that managing the RTUs’ heating and cooling set points, schedules, setbacks, and optimal start can result in a 20 % to 25 % reduction in electricity consumption in small commercial buildings. These buildings typically use fixed schedules to start the RTUs 60 to 120 min before occupancy begins, which results in excess energy consumption. This paper presents research that demonstrates and evaluates the performance of four optimal start methods, which utilize data-based modeling as a key element in facilitating adaptive control in response to time-varying inputs while requiring minimal sensor inputs. The evaluation found energy savings in two commercial buildings equipped with RTUs by periodically alternating four different optimal start models during the cooling and heating season. The resulting energy savings are positive for all models and range from 2 to 5 kWh/day/unit. The units on the east side of the building showed higher savings, while interior units showed greater variability in savings due to the differences in capacities and room sizes. Savings were considerably greater during the heating season compared to the cooling season. The performance of all four models on Mondays was poor; models suggested a shorter optimal start time, which resulted in relatively larger errors. Finally, the future work will look at using a different model for the days after weekends and holidays.

42 ENGINEERING↗
NASA NTRS1978

Automotive technology status and projections. Volume 2: Assessment report

Current and advanced conventional engines, advanced alternative engines, advanced power train components, and other energy conserving automobile modifications which could be implemented by the end of this century are examined. Topics covered include gas turbine engines, Stirling engines, advanced automatic transmissions, alternative fuels, and metal and ceramic technology. Critical problems are examined and areas for future research are indicated.

Dowdy, M.↗
DOE OSTI2026

Optimal Pathways from Alternative Carbon Feedstocks to Organic Commodity Chemicals

The use of biogenic and waste feedstocks is a promising strategy to improve the chemical sector's supply chain resiliency and carbon intensity. To help inform research efforts that transform these feedstocks into industrial chemicals, we used a systematic analysis framework to consistently evaluate the economics and environmental impacts of >200 alternative production pathways for 51 organic commodity chemicals in the United States under an optimistic future scenario that reflects the potential upper bounds of process scalability, energy availability, and carbon uptake. Lower-impact and lower-cost alternative pathways were identified for all but three chemicals, with 75% using thermochemical routes and half leveraging existing manufacturing infrastructure. Scenario analysis shows that the ranking of these pathways for half of the assessed chemicals is particularly sensitive to carbon uptake assumptions and criteria prioritization (i.e., cost only, environmental impact only, or both), with changes in electricity grid mix, hydrogen source, and underlying mass and energy flow data proving less influential. Implementing alternative pathways for just 11 chemicals could support a transition to net-zero greenhouse gas emissions from chemical production by 2050, with 11% lower cost than business as usual, similar water requirements, quadrupled electricity demand, and the use of most available woody biomass. These findings provide an exploratory guide toward a future chemical industry that harnesses alternative feedstocks.

09 BIOMASS FUELS↗
DOE OSTI2025

A Fundamentally New Coupled Approach to Contact Mechanics via the Dirichlet‐Neumann Schwarz Alternating Method

Contact phenomena are crucial for understanding the behavior of mechanical systems. However, existing computational approaches for simulating mechanical contact often face numerical challenges, such as inaccurate physical predictions, energy conservation errors, and unwanted oscillations. Here, we introduce an alternative technique for simulating dynamic contact based on the non‐overlapping Schwarz alternating method, originally developed for domain decomposition. In multibody contact scenarios, this method treats each body as a separate, non‐overlapping domain and prevents interpenetration using an alternating Dirichlet–Neumann iterative process. This approach has a strong theoretical foundation, eliminates the need for contact constraints, and offers flexibility, making it ideal for multiscale and multiphysics applications. We conducted a numerical comparison between the Schwarz method and traditional methods, such as the Lagrange multiplier and penalty methods, focusing on a benchmark impact problem. Our results indicate that the Schwarz alternating method outperforms traditional methods in several key areas: it provides more accurate predictions for various measurable quantities and demonstrates exceptional energy conservation capabilities. To address unwanted oscillations in contact velocities and forces, we explored various algorithms and stabilization techniques, ultimately opting for the naïve‐stabilized Newmark scheme for its simplicity and effectiveness. Additionally, we validated the efficiency of the Schwarz method in a three‐dimensional impact problem, highlighting its inherent capacity to accommodate different mesh topologies, time‐integration schemes, and time steps for each interacting body.

Schwarz alternating method↗
DOE OSTI2026

Hygrothermal Performance of Bio-Based Materials in Residential Building Wall Envelope Systems

In the United States, building envelope systems contribute approximately 28% of building energy consumption, with walls being a primary factor. As the construction industry explores new approaches to lower the energy intensity needed to manufacture materials and, in turn, reduce energy consumption, bio-based materials are gaining attention as a promising alternative. While prior studies have demonstrated that bio-based materials can decrease material energy intensity, their long-term hygrothermal behavior within a whole residential wall system is not yet fully understood. This study aims to evaluate the potential of replacing Oriented Strand Board (OSB) and drywall in residential wall systems with bio-based alternatives. The research focuses on two bio-based materials, assessing their hygrothermal performance under Chicago climate condition (Climate Zone 5). To achieve that, a series of laboratory experiments were conducted to measure key properties of the bio-based materials such as thickness, dimensions, density, thermal conductivity (as a function of temperature and humidity), moisture-dependent permeance and water vapor permeability (WVP), and sorption isotherms. These properties were then used in WUFI® simulations to predict the moisture durability of a standard residential wall system in Climate Zone 5. Results show that substituting OSB and drywall with bio-based materials can achieve acceptable moisture durability, effectively mitigating risks of mold growth and structural damage over time.

Palani, Hevar [ORNL] (ORCID:0000000220211994)↗
DOE OSTI2022

Discovery of a bright extended X-ray jet in RGB J1512+020A

ABSTRACT We report the discovery of a bright, extended X-ray jet in the quasar RGB J1512+020A (z = 0.22). Chandra observations show the X-ray core and 13 arcsec (∼45 kpc projected) extended emission coincident with the radio jet. The jet stands out as one of brightest X-ray jets (LX ∼ 7 × 1043 erg s−1) at low redshift (z < 0.5) discovered so far, with remarkably large X-ray to radio luminosity ratios (LX/Lr up to ∼50). We identified four main components, two unresolved knots and two extended structures, one being the jet brightest feature (JBF). All jet features are also detected in ALMA archival observations. The radio, sub-mm to X-ray spectra of the two knots can be modelled with a single synchrotron component. For the two resolved structures, the ALMA data unveil a turnover of the low-energy continuum at ∼460 GHz. External Comptonization of cosmic microwave background photons can account for the observed X-ray emission if the jet speed remains highly relativistic, with bulk motion Γbulk > 15, up to tens of kiloparsec from the core. However, the comparison with the spectral energy distribution of similar X-ray detected jets shows that the alternative hypothesis of synchrotron emission from an additional population of ultra-high-energy electrons is also possible. We report a tentative (≳2σ) optical detection of the JBF in images of the Dark Energy Camera Legacy Survey. If confirmed, the optical emission should be either the low-energy tail of the radiative component responsible for the X-ray emission or a third, separate component.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Alternative Fuels Data Center and Related Technology Integration Tools

The U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy's Vehicle Technologies Office (VTO) facilitates national coordination of the Clean Cities coalitions through its Technology Integration Program. VTO's Technology Integration Program supports a broad technology portfolio that can reduce transportation energy costs for businesses and consumers. Fleets, cities, and regions can use the tools featured in this guide to implement alternative fuels and advanced vehicles. Also learn how Clean Cities coalitions and their stakeholders across the country have used the tools.

AFDC↗
DOE OSTI2020

Alternative Fuels Data Center and Related Technology Integration Tools

The U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy's Vehicle Technologies Office (VTO) facilitates national coordination of the Clean Cities coalitions through its Technology Integration Program. VTO's Technology Integration Program supports a broad technology portfolio that can reduce transportation energy costs for businesses and consumers. Fleets, cities, and regions can use the tools featured in this guide to implement alternative fuels and advanced vehicles. Also learn how Clean Cities coalitions and their stakeholders across the country have used the tools.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

The Transportation Energy and Mobility Pathway Options (TEMPO) Model: Overview and Validation of V1.0 [Slides]

This presentation documents the approaches and methods used in the Transportation Energy & Mobility Pathway Options™ (TEMPO) model to evaluate passenger and freight demand for transportation and mobility services, project vehicle ownership and technology adoption decisions, and determine transport mode choices to derive scenarios of future energy use and emissions. TEMPO is an all-inclusive transportation demand model that covers the entire United States, with an implicit spatial resolution and an hourly temporal resolution that allows for generating time-resolved energy use profiles to assess multisectoral integration aspects. Key features of the TEMPO model include the ability to perform endogenous out-of-sample forecasting to extrapolate recent emerging trends and analyze impacts of disruptive technological breakthroughs and behavioral changes. TEMPO employs an innovative representation of passenger mobility demand stemming from household-level decisions that determine vehicle adoption, ownership, and use based on sociodemographics (e.g., income, household composition), technology attributes (e.g., travel cost, time), geography (e.g., urban, suburban, rural) and population-specific multiday mobility and travel requirements. This representation enables a more forward-looking perspective on the use of new mobility options and the adoption of alternative fuel vehicles, as well as a more accurate representation of their energy usage profiles than previous modeling approaches. A comparison with the U.S. Energy Information Administration’s Annual Energy Outlook showcases the ability of TEMPO to accurately replicate widely accepted projections by representing the key elements of the entire transportation sector at the appropriate level of resolution. TEMPO is intended to generate future scenarios of technology adoption, energy use, and emissions in the transportation sector to compare alternatives, inform decision makers, and assess integration with energy infrastructure and supply systems at an appropriate spatiotemporal resolution.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1980

Cogeneration Technology Alternatives Study (CTAS). Volume 2: Analytical approach

The use of various advanced energy conversion systems were compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. The ground rules established by NASA and assumptions made by the General Electric Company in performing this cogeneration technology alternatives study are presented. The analytical methodology employed is described in detail and is illustrated with numerical examples together with a description of the computer program used in calculating over 7000 energy conversion system-industrial process applications. For Vol. 1, see 80N24797.

Gerlaugh, H. E.↗
DOE OSTI2021

Addressing energy storage needs at lower cost via on-site thermal energy storage in buildings

Cost-effective energy storage is a critical enabler for the large-scale deployment of renewable electricity. Significant resources have been directed toward developing cost-effective energy storage, with research and development efforts dominated by work on lithium ion (Li-ion) battery technology. Though Li-ion batteries have many attractive qualities, it is not clear whether they can provide an affordable levelized cost of storage (LCOS) for certain applications, such as buildings. Buildings consume most of the world's electricity, and as much as 50% of their consumption goes toward meeting thermal loads. Thermal energy storage (TES) can provide a cost-effective alternative to Li-ion batteries for buildings; however, two questions remain to be answered. First, how much of total building energy storage requirements can be met via thermal storage for building loads? Second, can the LCOS for TES be favorable compared with Li-ion batteries? In this perspective, using the United States as a case study, we show that the total requirement for TES in buildings is in the range of ~1200–4500 electrical GW h, depending on the fraction of solar versus wind in the generation mix. Furthermore, we show that with at least 25% wind generation, all of the storage needed by buildings to support the grid can be met by TES. We also introduce a framework to calculate LCOS for on-site TES in buildings to enable a direct comparison with electrical storage technologies such as Li-ion batteries. This is not trivial, because the input energy type for TES (electricity) differs from the output energy type (thermal energy), and the efficiency can depend on ambient conditions. Our LCOS analysis shows that in many situations, TES can be more cost-effective for buildings than Li-ion batteries. We conclude our perspective by discussing future research and development opportunities that can significantly advance the deployment of TES for buildings to help enable a renewable electricity-dependent grid.

25 ENERGY STORAGE↗