Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “accelerator magnet”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

Major Solar Eruptions and High-Energy Particle Events During Solar Cycle 24

We report on a study of all major solar eruptions that occurred on the frontside of the Sun during the rise to peak phase of cycle 24 (first 62 months) in order to understand the key factors affecting the occurrence of large solar energetic particle events (SEPs) and ground level enhancement (GLE) events. The eruptions involve major flares with soft X-ray peak flux greater than or equal to 5.0 x10(exp−5) Wm(exp−2) (i.e., flare size greater than or equal to M5.0) and accompanying coronal mass ejections (CMEs). The selection criterion was based on the fact that the only front-side GLE in cycle 24 (GLE 71) had a flare size of M5.1. Only approximately 37% of the major eruptions from the western hemisphere resulted in large SEP events. Almost the same number of large SEP events was produced in weaker eruptions (flare size less than M5.0), suggesting that the soft X-ray flare is not a good indicator of SEP or GLE events. On the other hand, the CME speed is a good indicator of SEP and GLE events because it is consistently high supporting the shock acceleration mechanism. We found the CME speed, magnetic connectivity to Earth (in longitude and latitude), and ambient conditions as the main factors that contribute to the lack of high-energy particle events during cycle 24. Several eruptions poorly connected to Earth (eastern-hemisphere or behind-the-west-limb events) resulted in very large SEP events detected by the Solar Terrestrial Relations Observatory (STEREO) spacecraft. Some very fast CMEs, likely to have accelerated particles to GeV energies, did not result in a GLE event because of poor latitudinal connectivity. The stringent latitudinal requirement suggests that the highest-energy particles are likely accelerated in the nose part of shocks, while the lower energy particles are accelerated at all parts. There were also well-connected fast CMEs, which did not seem to have accelerated high-energy particles due to possible unfavorable ambient conditions (high Alfven speed, overall reduction in acceleration efficiency in cycle 24).

Flares↗

Spatially resolved polarization swings in the supermassive binary black hole candidate OJ 287 with first Event Horizon Telescope observations

We present the first Event Horizon Telescope 1.3 mm observations of the supermassive binary black hole candidate OJ 287. The observations achieved an unprecedented angular resolution of 18 μas and reveal significant structural and polarization variability over just five days, marking the shortest timescale on which such changes have been directly imaged in this source. The inner jet exhibits a twisted ridgeline structure, with features displaying apparent superluminal motions up to about 22 c. The linear polarization maps reveal three main polarized features whose electric-vector position angles (EVPAs) change substantially over the time span of our observations, including a component with a radial polarization consistent with being produced by a recollimation shock. Most notably, we directly resolved two innermost jet components whose EVPAs rotate in opposite directions. The faster component, moving at 2.4 ± 0.9 μas/day (17.4 ± 6.5 c), exhibits counterclockwise EVPA swings of roughly 3.7° per day, while the slower component, with a proper motion of 1.4 ± 0.3 μas/day (10.2 ± 2.2 c), rotates clockwise at approximately 2.5° per day. Previous studies inferred helical magnetic fields in AGN jets from time-resolved or integrated polarization variability but lacked the angular resolution to directly image this effect. Our results provide spatially resolved evidence that a helical magnetic field threads the jet’s collimation and acceleration zone, ruling out models based on the superposition of unresolved components. Our analysis suggests that propagating shocks interact with a Kelvin–Helmholtz plasma instability, illuminating different phases of the helical magnetic field and producing the observed polarization spatial and temporal variability. Moreover, our model naturally accounts for the more rapid polarization rotation observed in the faster moving component. Our model predicts even more rapid swings in polarization, which could be tested with future observations featuring a more densely sampled time coverage.

OJ 287↗

Modeling and design of compact, permanent-magnet transport systems for highly divergent, broad energy spread laser-driven proton beams

Laser-driven (LD) ion acceleration has been explored in a newly constructed short focal length laser beamline at the BELLA petawatt facility (interaction point 2, iP2). For applications utilizing such LD ion beams, a beam transport system is required, which for reasons of compactness be ideally contained within 3 m. While they are generated from a micron-scale source, large divergence and energy spread of LD ion beams present a unique challenge to transporting them compared to beams from conventional accelerators. This study gives an overview of proposed compact transport designs using permanent magnets satisfying different requirements depending on the application for the iP2 laser beamline such as radiation biology, material science, and high-energy density science. These designs are optimized for different parameters such as energy spread and peak proton density according to the application’s need. The various designs consist solely of permanent magnet elements, which can provide high magnetic field gradients on a small footprint. While the field strengths are fixed, we have shown that the beam size is able to be tuned effectively by varying the placement of the magnets. The performance of each design was evaluated based on high-order particle tracking simulations of typical LD proton beams. We also examine the ability of certain configurations to tune and select beam energies, critical for specific applications. A more detailed investigation was carried out for a design to deliver 10 MeV LD accelerated ions for radiation biology applications. With these transport system designs, the iP2 laser beamline is ready to house various application experiments.

43 PARTICLE ACCELERATORS↗

A fully kinetic model for orphan gamma-ray flares in blazars

ABSTRACT Blazars emit a highly variable non-thermal spectrum. It is usually assumed that the same non-thermal electrons are responsible for the IR-optical-UV emission (via synchrotron) and the gamma-ray emission (via inverse Compton). Hence, the light curves in the two bands should be correlated. Orphan gamma-ray flares (i.e. lacking a luminous low-frequency counterpart) challenge our theoretical understanding of blazars. By means of large-scale two-dimensional radiative particle-in-cell simulations, we show that orphan gamma-ray flares may be a self-consistent by-product of particle energization in turbulent magnetically dominated pair plasmas. The energized particles produce the gamma-ray flare by inverse Compton scattering an external radiation field, while the synchrotron luminosity is heavily suppressed since the particles are accelerated nearly along the direction of the local magnetic field. The ratio of inverse Compton to synchrotron luminosity is sensitive to the initial strength of turbulent fluctuations (a larger degree of turbulent fluctuations weakens the anisotropy of the energized particles, thus increasing the synchrotron luminosity). Our results show that the anisotropy of the non-thermal particle population is key to modelling the blazar emission.

79 ASTRONOMY AND ASTROPHYSICS↗

Three-dimensional solidification and melting using magnetic field control

A new two-fluid mathematical model for fully three dimensional steady solidification under the influence of an arbitrary acceleration vector and with or without an arbitrary externally applied steady magnetic field have been formulated and integrated numerically. The model includes Joule heating and allows for separate temperature dependent physical properties within the melt and the solid. Latent heat of phase change during melting/solidification was incorporated using an enthalpy method. Mushy region was automatically captured by varying viscosity orders of magnitude between liquidus and solidus temperature. Computational results were obtained for silicon melt solidification in a parallelepiped container cooled from above and from a side. The results confirm that the magnetic field has a profound influence on the solidifying melt flow field thus changing convective heat transfer through the boundaries and the amount and shape of the solid accrued. This suggests that development of a quick-response algorithm for active control of three dimensional solidification is feasible since it would require low strength magnetic fields.

Dulikravich, George S.↗

Recent Plasma Observations Related to Magnetic Merging and the Low-Latitude Boundary Layer. Case Study by Polar, March 18, 2006

We have begun an investigation of the nature of the low-latitude boundary layer in the mid-altitude cusp region using data from the Polar spacecraft. Magnetosheath-like plasma is frequently observed deep (in terms of distance from the magnetopause and in invariant latitude) in the magnetosphere. One such case, taken during a long period of northward interplanetary magnetic field (IMP) on March 18, 2006, shows injected magnetosheath ions within the magnetosphere with velocity distributions resulting from two separate merging sites along the same field lines. Cold ionospheric ions were also observed counterstreaming along the field lines, evidence that these field lines were closed. Our results support the idea of double reconnection under northward IMP on the same group of field lines can provide a source for the LLBL. However, the flow direction of the accelerated magnetosheath ions antiparallel to the local magnetic field and given location of the spacecraft suggest that these two injection sites are located northward of the spacecraft position. Observed convection velocities of the magnetic field lines are inconsistent with those expected for double post-cusp reconnection in both hemispheres. These observations favor a scenario in which a group of newly closed field lines was created by a combination of high shear merging at high latitudes in the northern hemisphere and low shear merging at lower latitudes at the dayside magnetopause.

Chandler, M.↗

Pitch-Angle Anisotropy Controls Particle Acceleration and Cooling in Radiative Relativistic Plasma Turbulence

Nature’s most powerful high-energy sources are capable of accelerating particles to high energy and radiating it away on extremely short timescales, even shorter than the light crossing time of the system. It is yet unclear what physical processes can produce such an efficient acceleration, despite the copious radiative losses. By means of radiative particle-in-cell simulations, we show that magnetically dominated turbulence in pair plasmas subject to strong synchrotron cooling generates a nonthermal particle spectrum with a hard power-law range (slope p~1) within a few eddy turnover times. Low pitch-angle particles can significantly exceed the nominal radiation-reaction limit, before abruptly cooling down. The particle spectrum becomes even harder (p<1) over time owing to particle cooling with an energy-dependent pitch-angle anisotropy. The resulting synchrotron spectrum is hard (νF ν ∝ ν s with s~1). Our findings have important implications for understanding the nonthermal emission from high-energy astrophysical sources, most notably the prompt phase of gamma-ray bursts and gamma-ray flares from the Crab nebula.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic Reconnection as the Driver of the Solar Wind

We present EUV solar observations showing evidence for omnipresent jetting activity driven by small-scale magnetic reconnection at the base of the solar corona. We argue that the physical mechanism that heats and drives the solar wind at its source is ubiquitous magnetic reconnection in the form of small-scale jetting activity (i.e., a.k.a. jetlets). This jetting activity, like the solar wind and the heating of the coronal plasma, are ubiquitous regardless of the solar cycle phase. Each event arises from small-scale reconnection of opposite polarity magnetic fields producing a short-lived jet of hot plasma and Alfv´en waves into the corona. The discrete nature of these jetlet events leads to intermittent outflows from the corona, which homogenize as they propagate away from the Sun and form the solar wind. This discovery establishes the importance of small-scale magnetic reconnection in solar and stellar atmospheres in understanding ubiquitous phenomena such as coronal heating and solar wind acceleration. Based on previous analyses linking the switchbacks to the magnetic network, we also argue that these new observations might provide the link between the magnetic activity at the base of the corona and the switchback solar wind phenomenon. These new observations need to be put in the bigger picture of the role of magnetic reconnection and the diverse form of jetting in the solar atmosphere.

magnetic reconnection↗

Mass Driver Two - A status report

The current status of Mass Driver Two, a linear synchronous motor for accelerating payloads or reaction mass, is discussed. Mass Driver Two combines all the essential elements of an operational mass driver with the exception of bucket recirculation and payload handling. These essential elements include: magnetic flight, vacuum environment, superconducting bucket coils, high acceleration (nominally 500 g's), optical position sensing and electronic triggering, power circuitry similar to that of a flight article, and regenerative braking. Mass Driver Two is operated on a single shot basis.

Snow, W. R.↗

Semiconductor Crystal Growth in Static and Rotating Magnetic fields

Magnetic fields have been applied during the growth of bulk semiconductor crystals to control the convective flow behavior of the melt. A static magnetic field established Lorentz forces which tend to reduce the convective intensity in the melt. At sufficiently high magnetic field strengths, a boundary layer is established ahead of the solid-liquid interface where mass transport is dominated by diffusion. This can have a significant effect on segregation behavior and can eliminate striations in grown crystals resulting from convective instabilities. Experiments on dilute (Ge:Ga) and solid solution (Ge-Si) semiconductor systems show a transition from a completely mixed convective state to a diffusion-controlled state between 0 and 5 Tesla. In HgCdTe, radial segregation approached the diffusion limited regime and the curvature of the solid-liquid interface was reduced by a factor of 3 during growth in magnetic fields in excess of 0.5 Tesla. Convection can also be controlled during growth at reduced gravitational levels. However, the direction of the residual steady-state acceleration vector can compromise this effect if it cannot be controlled. A magnetic field in reduced gravity can suppress disturbances caused by residual transverse accelerations and by random non-steady accelerations. Indeed, a joint program between NASA and the NHMFL resulted in the construction of a prototype spaceflight magnet for crystal growth applications. An alternative to the suppression of convection by static magnetic fields and reduced gravity is the imposition of controlled steady flow generated by rotating magnetic fields (RMF)'s. The potential benefits of an RMF include homogenization of the melt temperature and concentration distribution, and control of the solid-liquid interface shape. Adjusting the strength and frequency of the applied magnetic field allows tailoring of the resultant flow field. A limitation of RMF's is that they introduce deleterious instabilities above a critical magnetic field value. Growth conditions in which static magnetic fields rotational magnetic fields, and reduced gravitational levels can have a beneficial role will be described.

Volz, Martin↗

The clumpy circumstellar medium around young supernova remnants

Each of the youngest supernova remnants known in the Milky Way, Cas A, Kepler's SNR, and Tycho's SNR, shows a different morphological structure caused by different conditions in the progenitor stars and their surroundings. In all three cases, however, the observed shells have a thickness of about 1/4 the radius, a sharp outer edge, and significant brightness irregularities. These features require that the circumstellar medium be highly clumped. To investigate the phenomenon, models of the expansion have been constructed using a one-dimensional spherical hydrodynamic code. As a supernova shock moves down the external density gradient of the star, material behind the shock begins to go into free expansion. Then as surrounding material is encountered a reverse shock moving back into the ejectum will be formed. Until the expansion has swept up about eight times the ejected mass when the situation can be considered as a point explosion in its surroundings, the dynamics are controlled by conditions between the shocks. The region is also where the synchrotron radio emission from relativistic electrons trapped in magnetic fields arises. Initial particles and fields are accelerated and amplified by eddy motion at the interface between the ejected and swept-up material and at the boundaries of clumps. Polarimetry shows that these SNR have a net radial orientation of their magnetic fields apparently from stretching by Rayleigh-Taylor instabilities at the contact surfaces. Without clumps the observed shell is much too narrow and steep on the inside.

Dickel, J. R.↗

The evolution of cosmic-ray-mediated magnetohydrodynamic shocks: A two-fluid approach

We study the shock structure and acceleration efficiency of cosmic-ray mediated Magnetohydrodynamic (MHD) shocks both analytically and numerically by using a two-fluid model. Our model includes the dynamical effect of magnetic fields and cosmic rays on a background thermal fluid. The steady state solution is derived by following the technique of Drury & Voelk (1981) and compared to numerical results. We explore the time evolution of plane-perpendicular, piston-driven shocks. From the results of analytical and numerical studies, we conclude that the mean magnetic field plays an important role in the structure and acceleration efficiency of cosmic-ray mediated MHD shocks. The acceleration of cosmic-ray particles becomes less efficient in the presence of strong magnetic pressure since the field makes the shock less compressive. This feature is more prominent at low Mach numbers than at high Mach numbers.

Jun, Byung-Il↗

Light-wave control of correlated materials using quantum magnetism during time-periodic modulation of coherent transport

Light–wave quantum electronics utilizes the oscillating carrier wave to control electronic properties with intense laser pulses. Without direct light–spin interactions, however, magnetic properties can only be indirectly affected by the light electric field, mostly at later times. A grand challenge is how to establish a universal principle for quantum control of charge and spin fluctuations, which can allow for faster-than-THz clock rates. Using quantum kinetic equations for the density matrix describing non–equilibrium states of Hubbard quasiparticles, here we show that time–periodic modulation of electronic hopping during few cycles of carrier–wave oscillations can dynamically steer an antiferromagnetic insulating state into a metalic state with transient magnetization. While nonlinearities associated with quasi-stationary Floquet states have been achieved before, magneto–electronics based on quasiparticle acceleration by time–periodic multi–cycle fields and quantum femtosecond/attosecond magnetism via strongly–coupled charge–spin quantum excitations represents an alternative way of controlling magnetic moments in sync with quantum transport.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Study of the Non-Thermal X-Ray Emission of Shell-Type Supernova Remnants

We present an analysis of the X-ray spectrum of the Galactic shell-type SNR G347.3-0.5 (RX 51713.7-3946). This SNR is a member of a growing class of SNRs which are dynamically young, shell-type sources that emit non-thermal X-rays from specific regions on their outer shells. By performing a joint spectral analysis of data from observations made of G347.3-0.5 using the ROSAT PSPC, the ASCA GIS and the RXTE PCA, we have fit the spectra of particular regions of this SNR (including the bright northwestern and southwestern rims, the northeast rim and the interior diffuse emission) over the approximate energy range of 0.5 through 30 keV. We find that fits to the spectra of this SNR over this energy range using the SRCUT model were superior to a simple power law model or the SRESC model. We find that the inclusion of a thermal model with the SRCUT model helps to improve the fit to the observed X-ray spectrum: this represents the first detection of thermal X-ray emission from G347.3-0.5. Thermal emission appears to be more clearly associated with the diffuse emission in the interior of the SNR than with the bright X-ray emitting rims. A weak emission feature seen near 6.4 keV in the RXTE PCA spectrum most likely originates from diffuse X-ray emission from the surrounding Galactic Ridge rather than from G347.3-0.5 itself. We have analyzed our RXTE PCA data to search for pulsations from a recently discovered radio pulsar (PSR 51713-3949) which may be associated with G347.3-0.5, and we do not detect any X-ray pulsations at the measured radio period of 392 ms. Using the best-fit parameters obtained from the SRCUT model, we estimate the maximum energy of cosmic-ray electrons accelerated by the rims of G347.3-0.5 to be 19-25 TeV (assuming a magnetic field strength of B = 10muG), consistent with the results of Ellison et al. We present a broadband (radio to gamma ray) photon energy-flux spectrum for the northwestern rim of G347.3-0.5, where we have fit the spectrum using a more sophisticated synchrotron-inverse Compton model with a variable magnetic field strength. Our fit derived from this model yields a maximum energy of only 8.8 (+4.1) (-3.4) TeV for the accelerated cosmic-ray electrons and a much greater magnetic field strength of 150 (+250) (-80). Finally, we compare the gross properties of G347.3-0.5 with other SNRs known to possess X-ray spectra dominated by non-thermal emission.

Allen, Glenn E.↗

Kinetic Simulations of the Kruskal–Schwarzschild Instability in Accelerating Striped Outflows: Dynamics and Energy Dissipation

Astrophysical relativistic outflows are launched as Poynting-flux dominated, yet the mechanism governing efficient magnetic dissipation, which powers the observed emission, is still poorly understood. We study magnetic energy dissipation in relativistic "striped" jets, which host current sheets separating magnetically dominated regions with opposite field polarity. The effective gravity force g in the rest frame of accelerating jets drives the Kruskal–Schwarzschild instability (KSI), a magnetic analog of the Rayleigh–Taylor instability. By means of 2D and 3D particle-in-cell simulations, we study the linear and nonlinear evolution of the KSI. The linear stage is well described by linear stability analysis. The nonlinear stages of the KSI generate thin (skin-depth-thick) current layers, with length comparable to the dominant KSI wavelength. There, the relativistic drift-kink mode and the tearing mode drive efficient magnetic dissipation. The dissipation rate can be cast as an increase in the effective width Δ eff of the dissipative region, which follows dΔ eff /dt ≃ 0.05 $\sqrt{Δ_{eff} g}$. Our results have important implications for the location of the dissipation region in gamma-ray burst and active galactic nuclei jets.

79 ASTRONOMY AND ASTROPHYSICS↗

Microwave observations of late-type stars with the Very Large Array

The Very Large Array was used to search for microwave emission from 32 stars of late spectral type including RS CVn type stars, dwarf M stars, and stars with active chromospheres, coronae, or intense magnetic fields. The RS CVn stars were detected at 6 cm wavelength, and upper limits are established for another six. Radio emission was detected from three dwarf M flare stars, UV Cet, EQ Peg and YZ CMi. Both impulsive (no more than 20 s) and more gradual (at least ten minutes) bursts were observed from the flare star YZ CMi. Radio emission was not confirmed at 6 cm from the solar type star Chi(1) Ori, with an upper limit that is three times lower than the detections reported by other observers. Microwave emission could not be detected from any other solar type star of spectral class F to K. The quiescent radio emission from dwarf M flare stars was interpreted as nonthermal gyrosynchrotron emission by mildly relativistic electrons accelerated more or less continuously in the magnetic fields of starspots.

Pallavicini, R.↗

The Lightcraft project: Flight technology for a hypersonic mass transit system

Rensselaer Polytechnic Institute has been developing transatmospheric 'Lightcraft' technology aimed at creating an efficient, economically affordable, hypersonic mass transportation system. The system utilizes laser-energized airbreathing engines to accelerate minimum-volume passenger capsules. The system gains a high level of reliability by using remote 'centralized' space power sources, e.g., satellite solar power stations. The most critical portion of the Lightcraft's acceleration trajectory involves flight propulsion at hypersonic velocities within the Earth's atmosphere, using a 'Magneto-Hydro-Dynamic (MHD) Fanjet' mode. Of all the propulsion modes proposed for the Lightcraft's combined-cycle engine, the MHD-Fanjet mode has received the least critical inquiry, largely because of its complexity. During the 1991-1992 academic year, Rensselaer's ADP teams produced a detailed conceptual design for the MHD-Fanjet engine, including the specific details of its integration with the other three propulsive modes. To facilitate this process, students built a full-scale mockup of a 1/12th section of this annular engine, complete with a working model of the shroud translation system. The class also made preliminary design calculations for the double-dipole, 'cuspfield' superconducting magnets that provide the external magnetic field needed by the MHD air accelerator, as well as for an onboard microwave power system to enhance the electrical conductivity of the air plasma working fluid. In addition, a large hypersonic model of the MHD accelerator was designed for future tests in RPI's Hypersonic Shock Tunnel in order to validate present analytical performance models. Another group continued design work on a full-sized prototype of a one-person 'Mercury Lightcraft' (a transatmospheric flight simulator), with major emphasis on the detailed design of the major structure, robotic landing gear, and exterior aeroshell.

Myrabo, Leik↗