SEARCH · Engineering Papers

Results for “WING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Aircraft wing weight build-up methodology with modification for materials and construction techniques

An aircraft wing weight estimating method based on a component buildup technique is described. A simplified analytically derived beam model, modified by a regression analysis, is used to estimate the wing box weight, utilizing a data base of 50 actual airplane wing weights. Factors representing materials and methods of construction were derived and incorporated into the basic wing box equations. Weight penalties to the wing box for fuel, engines, landing gear, stores and fold or pivot are also included. Methods for estimating the weight of additional items (secondary structure, control surfaces) have the option of using details available at the design stage (i.e., wing box area, flap area) or default values based on actual aircraft from the data base.

York, P.↗

NASA NTRS1981

Transonic flutter study of a wind-tunnel model of an arrow-wing supersonic transport

A 1/20-size, low-speed flutter model of the SCAT-15F complete airplane was tested on cables to simulate a near free-flying condition. Only the model wing and fuselage were flexible. Flutter boundaries were measured for a nominal configuration and a configuration with wing fins removed at Mach numbers M from 0.76 to 1.2. For both configurations, the transonic dip in the wing flutter dynamic pressure q boundary was relatively small and the minimum flutter q occurred near M = 0.92. Removing the wing fins increased the flutter q about 14 percent and changed the flutter mode from symmetric to antisymmetric. Vibration and flutter analyses were made using a finite-element structural representation and subsonic kernel-function aerodynamics. For the nominal configuration, the analysis (using calculated modal data) predicted the experimental flutter q levels within 10 percent but did not predict the correct flutter mode at the higher M. For the configuration without wing fins, the analysis predicted 16 to 36 percent unconservative (higher than experimental) flutter q levels and showed extreme sensitivity to mass representation details that affected wing tip mode shapes. For high subsonic M, empennage aerodynamics had a significant effect on the predicted flutter boundaries of several symmetric modes.

Ruhlin, C. L.↗

NASA NTRS1983

Effects of wing and tail location on the aerodynamic characteristics of an airplane for Mach numbers from 0.25 to 4.63

Experimental investigations have been conducted to determine the effect of wing vertical position and horizontal-tail vertical and axial position on the static aerodynamic characteristics of a wing-body horizontal-tail configuration. The configurations investigated included the wing in a high, mid, or low position on the body with the horizontal tail in each of these vertical positions as well as in three axial positions. The closest position of the horizontal tail to the wing essentially provided on all-wing configuration. In addition, tests were made for the three wing positions with the horizontal tail removed. The tests were made in three different wind tunnels to provide data for a Mach number range from 0.25 to 4.63. The purpose of the investigation was to illustrate the strong effects of interference flow fields as a function of geometry and flight regime. An analysis of the results indicate some arrangements that might lead to aerodynamic problems and others in which the interference flow fields might be favorably exploited. The results suggest that a coplanar concept with a translating horizontal tail could potentially minimize the aerodynamic changes with Mach number and provide more optimum performance over the Mach number range.

Spearman, M. L.↗

NASA NTRS1983

Wind-tunnel investigation of aerodynamic loading on a 0.237-scale model of a remotely piloted research vehicle with a thick, high-aspect-ratio supercritical wing

Wind-tunnel measurements were made of the wing-surface static-pressure distributions on a 0.237 scale model of a remotely piloted research vehicle equipped with a thick, high-aspect-ratio supercritical wing. Data are presented for two model configurations (with and without a ventral pod) at Mach numbers from 0.70 to 0.92 at angles of attack from -4 deg to 8 deg. Large variations of wing-surface local pressure distributions were developed; however, the characteristic supercritical-wing pressure distribution occurred near the design condition of 0.80 Mach number and 2 deg angle of attack. The significant variations of the local pressure distributions indicated pronounced shock-wave movements that were highly sensitive to angle of attack and Mach number. The effect of the vertical pod varied with test conditions; however at the higher Mach numbers, the effects on wing flow characteristics were significant at semispan stations as far outboard as 0.815. There were large variations of the wing loading in the range of test conditions, both model configurations exhibited a well-defined peak value of normal-force coefficient at the cruise angle of attack (2 deg) and Mach number (0.80).

Byrdsong, T. A.↗

NASA NTRS1983

An analytical comparison of two wing structures for Mach 5 cruise airplanes

Mach 5 cruise research conducted by NASA is related to aerodynamics, propulsion, and structures. The study of structures includes the propulsion system, fuselage, and wings. Various studies have shown that the achievement of adequate range is largely dependent on a low structural mass fraction. The present investigation is concerned with a study of two wing structure configurations for Mach 5 aircraft. An uprated version (Ti-6242 replacing B-120 titanium) of the YF-12/SR-71 wing structure is considered. The B-120 titanium structure represents the current art of high speed aircraft wing structures. The YF-12 wing structure was designed about 20 years ago when the analytical methods for calculating thermal stresses were limited. The second wing structural configuration studied in the present investigation also used Ti-6242 materials but replaced the corrugated-beaded panels with diffusion bonded honeycomb-core sandwich panels, and replaced the z-stiffened shear webs with sine-wave stiffened shear webs.

Taylor, A. H.↗

NASA NTRS1983

Application of slender wing benefits to military aircraft

A review is provided of aerodynamic research conducted at the Langley Research Center with respect to the application of slender wing benefits in the design of high-speed military aircraft, taking into account the supersonic performance and leading-edge vortex flow associated with very highly sweptback wings. The beginning of the development of modern classical swept wing jet aircraft is related to the German Me 262 project during World War II. In the U.S., a theoretical study conducted by Jones (1945) pointed out the advantages of the sweptback wing concept. Developments with respect to variable sweep wings are discussed, taking into account early research in 1946, a joint program of the U.S. with the United Kingdom, the tactical aircraft concept, and the important part which the Langley variable-sweep research program played in the development of the F-111, F-14, and B-1. Attention is also given to hybrid wings, vortex flow theory development, and examples of flow design technology.

Polhamus, E. C.↗

NASA NTRS1981

Measured transonic unsteady pressures on an energy efficient transport wing with oscillating control surfaces

Highlight results are presented from subsonic and transonic pressure measurement studies conducted in the Langley Transonic Dynamics Tunnel on a supercritical wing model representative of an energy efficient transport design. Steady- and unsteady-pressure data were acquired on the upper and lower wing surface at an off-design Mach number of 0.60 and at the design Mach number of 0.78, for a Reynolds number of 2.2 x 10(6) (based on the wing average chord). The model configuration consisted of a sidewall-Mounted half-body fuselage and a semi-span wing with an aspect ratio of 10.76, a leading-edge sweepback angle of 28.8 degrees, and supercritical airfoil sections. The wing is instrumented with 252 static pressure orifices and 164 dynamic pressure gages. Model test variables included wing angle of attack, control-surface mean deflection angle, control-surface oscillating deflection angle and frequency, and phasing between oscillating leading-edge and trailing-edge controls when used together.

Cazier, F. W., Jr.↗

NASA NTRS1980

Results of design studies and wind tunnel tests of high-aspect-ratio supercritical wings for an energy efficient transport

These basic characteristics of critical wings included wing area, aspect ratio, average thickness, and sweep as well as practical constraints on the planform and thickness near the wing root to allow for the landing gear. Within these constraints, a large matrix of wing designs was studied with spanwise variations in the types of airfoils and distribution of lift as well as some small planform changes. The criteria by which the five candidate wings were chosen for testing were the cruise and buffet characteristics in the transonic regime and the compatibility of the design with low speed (high-lift) requirements. Five wing-wide-body configurations were tested in the NASA Ames 11-foot transonic wind tunnel. Nacelles and pylons, flap support fairings, tail surfaces, and an outboard aileron were also tested on selected configurations.

Steckel, D. K.↗

NASA NTRS1984

Design of a composite wing extension for a general aviation aircraft

A composite wing extension was designed for a typical general aviation aircraft to improve lift curve slope, dihedral effect, and lift to drag ratio. Advanced composite materials were used in the design to evaluate their use as primary structural components in general aviation aircraft. Extensive wind tunnel tests were used to evaluate six extension shapes. The extension shape chosen as the best choice was 28 inches long with a total area of 17 square feet. Subsequent flight tests showed the wing extension's predicted aerodynamic improvements to be correct. The structural design of the wing extension consisted of a hybrid laminate carbon core with outer layers of Kevlar - layed up over a foam interior which acted as an internal support. The laminate skin of the wing extension was designed from strength requirements, and the foam core was included to prevent buckling. A joint lap was recommended to attach the wing extension to the main wing structure.

Adney, P. S.↗

NASA NTRS1985

Detailed pressure distribution measurements obtained on several configurations of an aspect-ratio-7 variable twist wing

Detailed pressure distribution measurements were made for 11 twist configurations of a unique, multisegmented wing model having an aspect ratio of 7 and a taper ratio of 1. These configurations encompassed span loads ranging from that of an untwisted wing to simple flapped wings both with and without upper-surface spoilers attached. For each of the wing twist configurations, electronic scanning pressure transducers were used to obtain 580 surface pressure measurements over the wing in about 0.1 sec. Integrated pressure distribution measurements compared favorably with force-balance measurements of lift on the model when the model centerbody lift was included. Complete plots and tabulations of the pressure distribution data for each wing twist configuration are provided.

Holbrook, G. T.↗

NASA NTRS1985

Experimental and theoretical study of the longitudinal aerodynamic characteristics of delta and double-delta wings at Mach numbers of 1.60, 1.90, and 2.16

An experimental and theoretical study was conducted to investigate the supersonic aerodynamic characteristics of delta and double-delta wings. Testing was conducted in the Langley Unitary Plan Wind Tunnel at Mach numbers of 1.60, 1.90, and 2.16. The double-delta wings exhibited lower zero-lift drag values than the delta wings having the same aspect ratio, whereas delta wings provided the lower drag due to lift. Deflections of the trailing-edge flaps for pitch control revealed that the induced aerodynamic forces were only a function of the flap planform and were independent of wing planform. The supporting theoretical analysis showed that the supersonic design and analysis system (SDAS) did not consistently predict all the longitudinal aerodynamic characteristics of the low-sweep, low-fineness-ratio wing-body configurations under investigation.

Wood, R. M.↗

NASA NTRS1985

Estimating the weight of generally configured dual wing systems

Formulas available for the weight estimation of monoplane wings cannot be said to be appropriate for the estimation of generally configured dual wing systems. In the present paper a method is described which simultaneously generates a structural weight estimate and a fully stressed, quasi-optimal structure for a model of a dual wing system. The method is fast and inexpensive. It is ideally suited to preliminary design. To illustrate the method, a dual wing system and a conventional wing system are sized. Numerical computation is shown to be suitably fast for both cases and, for both cases, convergence to a final configuration is shown to be quite rapid. To illustrate the validity of the method, a conventional wing is sized and its weight obtained by the present method is compared to its weight determined by a reputable weight estimation formula. The results are shown to be very close.

Cronin, D. L.↗

NASA NTRS1986

Unsteady transonic flow calculations for wing-fuselage configurations

Unsteady transonic flow calculations are presented for wing-fuselage configurations. Calculations are performed by extending the XTRAN3S unsteady transonic small-disturbance code to allow the treatment of a fuselage. Details of the XTRAN3S fuselage modeling are discussed in the context of the small-disturbance equation. Transonic calculations are presented for three wing-fuselage configurations with leading edge sweep angles ranging from 0 deg to 46.76 deg. Simple bending and torsion modal oscillations of the wing are calculated. Sectional lift and moment coefficients for the wing-alone and wing-fuselage cases are compared and the effects of fuselage aerodynamic interference on the unsteady wing loading are revealed. Tabulated generalized aerodynamic forces used in flutter analyses, indicate small changes in the real in-phase component and as much as a 30% change in the imaginary component when the fuselage is included in the calculation. These changes result in a 2 to 5% increase in total magnitude and a several degree increase in phase.

Batina, J. T.↗

NASA NTRS1985

Aerodynamic design considerations for efficient high-lift supersonic wings

A previously developed technique for selecting a design space for efficient supersonic wings is reviewed; this design-space concept is expanded to include thickness and camber effects and is evaluated for cambered wings at high-lift conditions. The original design-space formulation was based on experimental upper-surface and lower-surface normal-force characteristics for flat, uncambered delta wings; it is shown that these general characteristics hold for various thickness distributions and for various amounts of leading-edge camber. The original design-space formulation was also based on the assumption that the combination of Mach number and leading-edge sweep which would produce an equal division of flat-wing lift between the upper and lower surface would also be the proper combination to give the best cambered-wing performance. Using drag-due-to-lift factor as a measure of performance, for high-lift conditions cambered-wing performance is shown to significantly increase as conditions approach the design space; this correlation is demonstrated for both subcritical and supercritical flows.

Miller, D. S.↗

NASA NTRS1986

An evaluation of leading-edge flap performance on delta and double-delta wings at supersonic speeds

The aerodynamic performance of leading-edge flaps on three delta double-delta wing planforms having aspect ratios of 1.75, 2.11, and 2.50, have been investigated experimentally. The wings were mounted on a generic fuselage without an inlet canopy, or a vertical tail. The Mach numbers of the flow over the wings were 1.60, 1.90 and 2.16. A primary set of full-span leading-edge flaps with similar root and tip chords were tested on each wing, and several alternate flap planforms were tested on the aspect ratio 1.75 wings. It is found that all leading edge geometries were effective in reducing drag lifting over the range of wing aspect ratios and Mach numbers tested. Greater flap performance was obtained when primary flaps were applied to the delta planform. In general, the primary flap geometry yielded better performance than the alternative geometries tested. Flow visualization techniques were found to be useful for identifying the beneficial effects of leading-edge flap deflection on flow separation as well as fuselage interference effects. Black and white photographs of the delta and double-delta planforms are provided.

Covell, P. F.↗

NASA NTRS1985

A new look at arbitrary motion unsteady aerodynamics and its application to rotary-wing aeroelasticity

This paper presents in a unified manner recent research on arbitrary motion unsteady aerodynamics with an emphasis on applications to a number of rotary wing aeroelastic problems. The term arbitrary motion is used to denote growing or decaying oscillations with a certain frequency. The specific topics treated in this paper are: (1) generalization of Greenberg's theory and its application to hingeless rotor aeroelastic stability; (2) description of a new technique for formulating finite state approximations to unsteady aerodynamic theories, which are suitable for both fixed-wing and rotary-wing applications, and its application to generalize Loewy's theory; (3) comparison of fixed wing and rotary-wing indicial response functions; (4) influence of a arbitrary motion aerodynamics, as represented by dynamic inflow on a helicopter in ground resonance and (5) comparison of dynamic inflow with arbitrary motion unsteady airfoil aerodynamics. From the discussion of these topics a number of useful conclusions on the fundamental nature of arbitrary motion aerodynamics and its role in rotary-wing aeroelasticity are obtained.

Friedmann, P. P.↗

NASA NTRS1986

Transonic aeroelasticity of wings with tip stores

The presence of tip stores influences both aerodynamic and aeroelastic performances of wings. Such effects are more pronounced in the transonic regime. In this study, transonic aeroelasticity of wings with tip stores is studied for the first time by a theoretical method using the unsteady-small disturbance transonic aerodynamic equations coupled with modal structural equations of motion. The aerodynamic and structural equations of motion are simultaneously integrated by a time-accurate numerical scheme. To validate the tip store simulation, aeroelastic computations are made for a typical rectangular wing with a tip store and results are correlated with available wind tunnel data for the corresponding wing without a tip store at various flight conditions. Aeroelastic computations are also made for a typical fighter wing with a tip store. Present computations show that it is important to account for the aerodynamics of the tip store, particularly in the transonic regime where the tip store can make the wing aeroelastically unstable.

Guruswamy, G. P.↗

NASA NTRS1986

Over-the-wing propeller

This invention is an aircraft with a system for increasing the lift drag ratio over a broad range of operating conditions. The system positions the engines and nacelles over the wing in such a position that gains in propeller efficiency is achieved simultaneously with increases in wing lift and a reduction in wing drag. Adverse structural and torsional effects on the wings are avoided by fuselage mounted pylons which attach to the upper portion of the fuselage aft of the wings. Similarly, pylon-wing interference is eliminated by moving the pylons to the fuselage. Further gains are achieved by locating the pylon surface area aft of the aircraft center of gravity, thereby augmenting both directional and longitudinal stability. This augmentation has the further effect of reducing the size, weight and drag of empennage components. The combination of design changes results in improved cruise performance and increased climb performance while reducing fuel consumption and drag and weight penalties.

Johnson, Joseph L., Jr.↗